Geological and Structural evolution of the Eurasia Africa plate boundary in the Gulf of Cadiz Central Eastern Atlantic Sea.

Iberia Africa plate boundary, cross, roughly W-E, connecting the eastern Atlantic Ocean from Azores triple junction to the Continental margin of Morocco. Relative movement between the two plate change along the boundary, from transtensive near the Azores archipelago, through trascurrent movement in the middle at the Gloria Fracture Zone, to transpressive in the Gulf of Cadiz area. This study presents the results of geophysical and geological analysis on the plate boundary area offshore Gibraltar. The main topic is to clarify the geodynamic evolution of this area from Oligocene to Quaternary. Recent studies have shown that the new plate boundary is represented by a 600 km long set of aligned, dextral trascurrent faults (the SWIM lineaments) connecting the Gloria fault to the Riff orogene. The western termination of these lineaments crosscuts the Gibraltar accretionary prism and seems to reach the Moroccan continental shelf. In the past two years newly acquired bathymetric data collected in the Moroccan offshore permit to enlighten the present position of the eastern portion of the plate boundary, previously thought to be a diffuse plate boundary. The plate boundary evolution, from the onset of compression in the Oligocene to the Late Pliocene activation of trascurrent structures, is not yet well constrained. The review of available seismics lines, gravity and bathymetric data, together with the analysis of new acquired bathymetric and high resolution seismic data offshore Morocco, allows to understand how the deformation acted at lithospheric scale under the compressive regime. Lithospheric folding in the area is suggested, and a new conceptual model is proposed for the propagation of the deformation acting in the brittle crust during this process. Our results show that lithospheric folding, both in oceanic and thinned continental crust, produced large wavelength synclines bounded by short wavelength, top thrust, anticlines. Two of these anticlines are located in the Gulf of Cadiz, and are represented by the Gorringe Ridge and Coral Patch seamounts. Lithospheric folding probably interacted with the Monchique – Madeira hotspot during the 72 Ma to Recent, NNE – SSW transit. Plume related volcanism is for the first time described on top of the Coral Patch seamount, where nine volcanoes are found by means of bathymetric data. 40Ar-39Ar age of 31.4±1.98 Ma are measured from one rock sample of one of these volcanoes. Analysis on biogenic samples show how the Coral Patch act as a starved offshore seamount since the Chattian. We proposed that compression stress formed lithospheric scale structures playing as a reserved lane for the upwelling of mantle material during the hotspot transit. The interaction between lithospheric folding and the hotspot emplacement can be also responsible for the irregularly spacing, and anomalous alignments, of individual islands and seamounts belonging to the Monchique - Madeira hotspot.

Geochronological and structural evolution of the western and central Kaoko Belt in NW Namibia

This thesis focusses on the tectonic evolution and geochronology of part of the Kaoko orogen, which is part of a network of Pan-African orogenic belts in NW Namibia. By combining geochemical, isotopic and structural analysis, the aim was to gain more information about how and when the Kaoko Belt formed. The first chapter gives a general overview of the studied area and the second one describes the basis of the Electron Probe Microanalysis dating method. The reworking of Palaeo- to Mesoproterozoic basement during the Pan-African orogeny as part of the assembly of West Gondwana is discussed in Chapter 3. In the study area, high-grade rocks occupy a large area, and the belt is marked by several large-scale structural discontinuities. The two major discontinuities, the Sesfontein Thrust (ST) and the Puros Shear Zone (PSZ), subdivide the orogen into three tectonic units: the Eastern Kaoko Zone (EKZ), the Central Kaoko Zone (CKZ) and the Western Kaoko Zone (WKZ). An important lineament, the Village Mylonite Zone (VMZ), has been identified in the WKZ. Since plutonic rocks play an important role in understanding the evolution of a mountain belt, zircons from granitoid gneisses were dated by conventional U-Pb, SHRIMP and Pb-Pb techniques to identify different age provinces. Four different age provinces were recognized within the Central and Western part of the belt, which occur in different structural positions. The VMZ seems to mark the limit between Pan-African granitic rocks east of the lineament and Palaeo- to Mesoproterozoic basement to the west. In Chapter 4 the tectonic processes are discussed that led to the Neoproterozoic architecture of the orogen. The data suggest that the Kaoko Belt experienced three main phases of deformation, D1-D3, during the Pan-African orogeny. Early structures in the central part of the study area indicate that the initial stage of collision was governed by underthrusting of the medium-grade Central Kaoko zone below the high-grade Western Kaoko zone, resulting in the development of an inverted metamorphic gradient. The early structures were overprinted by a second phase D2, which was associated with the development of the PSZ and extensive partial melting and intrusion of ~550 Ma granitic bodies in the high-grade WKZ. Transcurrent deformation continued during cooling of the entire belt, giving rise to the localized low-temperature VMZ that separates a segment of elevated Mesoproterozoic basement from the rest of the Western zone in which only Pan-African ages have so far been observed. The data suggest that the boundary between the Western and Central Kaoko zones represents a modified thrust zone, controlling the tectonic evolution of the Kaoko belt. The geodynamic evolution and the processes that generated this belt system are discussed in Chapter 5. Nd mean crustal residence ages of granitoid rocks permit subdivision of the belt into four provinces. Province I is characterised by mean crustal residence ages <1.7 Ga and is restricted to the Neoproterozoic granitoids. A wide range of initial Sr isotopic values (87Sr/86Sri = 0.7075 to 0.7225) suggests heterogeneous sources for these granitoids. The second province consists of Mesoproterozoic (1516-1448 Ma) and late Palaeo-proterozoic (1776-1701 Ma) rocks and is probably related to the Eburnian cycle with Nd model ages of 1.8-2.2 Ga. The eNd i values of these granitoids are around zero and suggest a predominantly juvenile source. Late Archaean and middle Palaeoproterozoic rocks with model ages of 2.5 to 2.8 Ga make up Province III in the central part of the belt and are distinct from two early Proterozoic samples taken near the PSZ which show even older TDM ages of ~3.3 Ga (Province IV). There is no clear geological evidence for the involvement of oceanic lithosphere in the formation of the Kaoko-Dom Feliciano orogen. Chapter 6 presents the results of isotopic analyses of garnet porphyroblasts from high-grade meta-igneous and metasedimentary rocks of the sillimanite-K-feldspar zone. Minimum P-T conditions for peak metamorphism were calculated at 731±10 °C at 6.7±1.2 kbar, substantially lower than those previously reported. A Sm-Nd garnet-whole rock errorchron obtained on a single meta-igneous rock yielded an unexpectedly old age of 692±13 Ma, which is interpreted as an inherited metamorphic age reflecting an early Pan-African granulite-facies event. The dated garnets survived a younger high-grade metamorphism that occurred between ca. 570 and 520 Ma and apparently maintained their old Sm-Nd isotopic systematics, implying that the closure temperature for garnet in this sample was higher than 730 °C. The metamorphic peak of the younger event was dated by electronmicroprobe on monazite at 567±5 Ma. From a regional viewpoint, it is possible that these granulites of igneous origin may be unrelated to the early Pan-African metamorphic evolution of the Kaoko Belt and may represent a previously unrecognised exotic terrane.

New data on the Vrancea Nappe (Moldavidian Basin, Outer Carpathian Domain, Romania): paleogeographic and geodynamic reconstructions

A study has been performed on the Cretaceous to Early Miocene succession of the Vrancea Nappe (Outer Carpathians, Romania), based on field reconstruction of the stratigraphic record, mineralogical-petrographic and geochemical analyses. Extra-basinal clastic supply and intra-basinal autochthonous deposits have been differentiated, appearing laterally inter-fingered and/or interbedded. The main clastic petrofacies consist of calcarenites, sub-litharenites, quartzarenites, sub-arkoses, and polygenic conglomerates derived from extra-basinal margins. An alternate internal and external provenance of the different supplies is the result of the paleogeographic re-organization of the basin/margins system due to tectonic activation and exhumation of rising areas. The intra-basinal deposits consist of black shales and siliceous sediments (silexites and cherty beds), evidencing major environmental changes in the Moldavidian Basin. Organic-matter-rich black shales were deposited during anoxic episodes related to sediment starvation and high nutrient influx due to paleogeographic isolation of the basin caused by plate drifting. The black shales display relatively high contents in sub-mature to mature, Type II lipidic organic matter (good oil and gas-prone source rocks) constituting a potentially active petroleum system. The intra-basinal siliceous sediments are related to oxic pelagic or hemipelagic environments under tectonic quiescence conditions although its increase in the Oligocene part of the succession can be correlated with volcanic supplies. The integration of all the data in the “progressive reorientation of convergence direction” Carpathian model, and their consideration in the framework of a foreland basin, led to propose some constrains on the paleogeographic-geodynamic evolutionary model of the Moldavidian Basin from the Late Cretaceous to the Burdigalian.

Tectono-sedimentary evolution of the ’Numidian Formation’ and Lateral Facies (southern branch of the western Tethys): constraints for central-western Mediterranean geodynamics

The origin of the Numidian Formation (latest Oligocene to middle Miocene), characterized by ultra-mature quartzose arenites with abundant well-rounded frosted quartz grains, remains controversial. This formation, sedimented in the external domain of the Maghrebian Flysch Basin, displays three characteristic stratigraphic members with marked longitudinal (proximal–distal) and transverse (along-chain) variations with palaeogeographical importance. The origin of the Numidian supply is related to the outward tectogenetic propagation when a forebulge evolved in the African foreland, leading to the erosion of African cratonic areas rich in quartzose arenites (Nubian Sandstone-like). The ages of the Numidian Formation checked by Betic, Maghrebian and Southern Apennine data suggest a timing for the accretionary orogenic wedge, earlier in the Betic-Rifian Arc (after middle Burdigalian), later in the Algerian-Tunisian Tell (after late Burdigalian) and afterwards in Sicily and the Southern Apennines (after Langhian). A geodynamic evolutionary model for the central-western Mediterranean is proposed.

Continental extension: From core complexes to rigid block faulting

Extension of overthickened continental crust is commonly characterized by an early core complex stage of extension followed by a later stage of crustal-scale rigid block faulting. These two stages are clearly recognized during the extensional destruction of the Alpine orogen in northeast Corsica, where rigid block faulting overprinting core complex formation eventually led to crustal separation and the formation of a new oceanic backarc basin (the Ligurian Sea). Here we investigate the geodynamic evolution of continental extension by using a novel, fully coupled thermomechanical numerical model of the continental crust. We consider that the dynamic evolution is governed by fault weakening, which is generated by the evolution of the natural-state variables (i.e., pressure, deviatoric stress, temperature, and strain rate) and their associated energy fluxes. Our results show the appearance of a detachment layer that controls the initial separation of the brittle crust on characteristic listric faults, and a core complex formation that is exhuming strongly deformed rocks of the detachment zone and relatively undeformed crustal cores. This process is followed by a transitional period, characterized by an apparent tectonic quiescence, in which deformation is not localized and energy stored in the upper crust is transferred downward and causes self-organized mobilization of the lower crust. Eventually, the entire crust ruptures on major crosscutting faults, shifting the tectonic regime from core complex formation to wholesale rigid block faulting.

Sedimentation pelagique et encroûtements cryptalgaires: les calcaires gremeleux du Carixien portugais

In Portugal, Carixian is generally represented by alternative layers of marly limestones characterized by nodule and lumpy levels. These layers are particularly developped [show preferential development] on passage areas to a sedimentary basin, particularly along the slope of tilted blocks between the Meseta and Berlenga's horst. This facies is included in the range of the «nodular limestone» and of the «ammonitico-rosso». Limestones are radiolaria micrites with fragments of pelagic organisms (ammonoids, thin shelled gastropods). These layers can be affected by intensive bioturbation (Brenha) which is responsible for dismantlement, specially where the initial thickness does not exceed a few centimetres. This process can lead to the isolation of residual nodules (Brenha, São Pedro de Muel, Peniche) which can be mobilised by massive sliding (Peniche). The isolated elements, shell fragments or residual nodules, can also be incrustated, thus developing oncolitic cryptalgal structures. At Brenha the lump structure developed progressively into a sequence overlapping the normal sedimentary one (thick limestone beds alternating with bituminous shales). Cryptalgal structures correspond to rather unstable environment conditions on mobile margins. These structures are known in deep pelagic sediments corresponding to well defined events of the geodynamic evolution (end of the initial rifting). Cryptalgal accretions disappear towards the sedimentary basin, and the nodular levels are less important. In the articulation areas with the Tomar platform, small mounds and cupules (Alcabideque) developed within the alternating marly-limestone levels. They represent the so called «mud mounds» of metric dimensions. The upper part of these «mud mounds» is hardened, showing track remains and supporting some brachiopods and pectinids. Hence the lumpy facies of Portugal is included among the range of sedimentaty environments and can be used as «geodynamic tracer».

Volcanic events in the Eastern part of the Adriatic foreland (Northern Marchean Italy)

Proceedings of the 1'I R.C.A.N.S. Congress, Lisboa, October 1992

Coastal sedimentary environments and sea-level changes

A detailed knowledge of the 3-D arrangement and lateral facies relationships of the stacking patterns in coastal deposits is essential to approach many geological problems such as precise tracing of sea level changes, particularly during small scale fluctuations. These are useful data regarding the geodynamic evolution of basin margins and yield profit in oil exploration. Sediment supply, wave-and tidal processes, coastal morphology, and accommodation space generated by eustasy and tectonics govern the highly variable architecture of sedimentary bodies deposited in coastal settings. But these parameters change with time, and erosional surfaces may play a prominent role in areas located towards land. Besides, lateral shift of erosional or even depositional loci very often results in destruction of large parts of the sediment record. Several case studies illustrate some commonly found arrangements of facies and their distinguishing features. The final aim is to get the best results from the sedimentological analysis of coastal units.

Depleted arc volcanism in the Alboran Sea and shoshonitic volcanism in Morocco: geochemical and isotopic constraints on Neogene tectonic processes

Samples of volcanic rocks from Alboran Island, the Alboran Sea floor and from the Gourougou volcanic centre in northern Morocco have been analyzed for major and trace elements and Sr-Nd isotopes to test current theories on the tectonic geodynamic evolution of the Alboran Sea. The Alboran Island samples are low-K tholeiitic basaltic andesites whose depleted contents of HFS elements (similar to0.5xN-MORB), especially Nb (similar to0.2xN-MORB), show marked geochemical parallels with volcanics from immature intra-oceanic arcs and back-arc basins. Several of the submarine samples have similar compositions, one showing low-Ca boninite affinity. Nd-143/Nd-144 ratios fall in the same range as many island-arc and back-arc basin samples, whereas Sr-87/Sr-86 ratios (on leached samples) are somewhat more radiogenic. Our data point to active subduction taking place beneath the Alboran region in Miocene times, and imply the presence of an associated back-arc spreading centre. Our sea floor suite includes a few more evolved dacite and rhyolite samples with (Sr-87/Sr-86)(0) up to 0.717 that probably represent varying degrees of crustal melting. The shoshonite and high-K basaltic andesite lavas from Gourougou have comparable normalized incompatible-element enrichment diagrams and Ce/Y ratios to shoshonitic volcanics from oceanic island arcs, though they have less pronounced Nb deficits. They are much less LIL- and LREE-enriched than continental arc analogues and post-collisional shoshonites from Tibet. The magmas probably originated by melting in subcontinental lithospheric mantle that had experienced negligible subduction input. Sr-Nd isotope compositions point to significant crustal contamination which appears to account for the small Nb anomalies. The unmistakable supra-subduction zone (SSZ) signature shown by our Alboran basalts and basaltic andesite samples refutes geodynamic models that attribute all Neogene volcanism in the Alboran domain to decompression melting of upwelling asthenosphere arising from convective thinning of over-thickened lithosphere. Our data support recent models in which subsidence is caused by westward rollback of an eastward-dipping subduction zone beneath the westemmost Mediterranean. Moreover, severance of the lithosphere at the edges of the rolling-back slab provides opportunities for locally melting lithospheric mantle, providing a possible explanation for the shoshonitic volcanism seen in northern Morocco and more sporadically in SE Spain. (C) 2004 Elsevier B.V. All rights reserved.

Radiolarian biostratigraphic evidence for a Late Jurassic age of the El Tambor group ophiolites (Guatemala)

We present a radiolarian biostratigraphic study of the metacherts of the El Tambor Group ophiolites (South Motagua Unit), Guatemala. The ophiolite sequence comprises MOR pillow metabasalts, massive metabasalts, metacherts and micaschists. The age of the studied metacherts is referable to the Late Jurassic (Oxfordian-Kimmeridgian). The radiolarian assemblage described in this paper is the first Jurassic finding in the ophiolitic MOR succession of the Motagua zone and represents a valuable tool to constrain the geodynamic evolution of the Caribbean area. A review of the ages of Jurassic rocks associated with the ophiolites from the Caribbean area is also reported.

The break-up of East Gondwana along the northeast coast of Oman: evidence from the Batain basin

Recent detailed studies on the Batain nappes (northeast coast of Oman), which represent a special part of the so-called `Oman Exotics', have led to a better understanding of the Neotethyan geodynamic evolution. The Batain Exotics bear witness to volcanic activity, sea-level changes, tectonic instability, rifting and oceanization along the Eastern Oman margin during Late Palaeozoic and Mesozoic times. They allow definition of the Batain basin as an aborted Permian branch of Neotethys. This marine basin was created in Early Permian times extending southward to the East African/Madagascar region and was linked to the Karoo rift system. The presented revised classification of the Batain nappes considers the Batain basin to be no longer a part of the Hawasina basin and the Neotethyan mat-gin proper. We attribute the Batain basin to a Mozambique-Sornali-Masirah rift system (Somoma). This system started in Early Permian, times, creating a marine basin between Arabia and India/Madagascar; rifting in the Late Triassic and oceanization during Late Jurassic times led to the separation of East Gondwana.

3D seismic facies characterization and geological patterns recognition (Australian North West Shelf)

EXECUTIVE SUMMARY This PhD research, funded by the Swiss Sciences Foundation, is principally devoted to enhance the recognition, the visualisation and the characterization of geobodies through innovative 3D seismic approaches. A series of case studies from the Australian North West Shelf ensures the development of reproducible integrated 3D workflows and gives new insight into local and regional stratigraphic as well as structural issues. This project was initiated in year 2000 at the Geology and Palaeontology Institute of the University of Lausanne (Switzerland). Several collaborations ensured the improvement of technical approaches as well as the assessment of geological models. - Investigations into the Timor Sea structural style were carried out at the Tectonics Special Research Centre of the University of Western Australia and in collaboration with Woodside Energy in Perth. - Seismic analysis and attributes classification approach were initiated with Schlumberger Oilfield Australia in Perth; assessments and enhancements of the integrated seismic approaches benefited from collaborations with scientists from Schlumberger Stavanger Research (Norway). Adapting and refining from "linear" exploration techniques, a conceptual "helical" 3D seismic approach has been developed. In order to investigate specific geological issues this approach, integrating seismic attributes and visualisation tools, has been refined and adjusted leading to the development of two specific workflows: - A stratigraphic workflow focused on the recognition of geobodies and the characterization of depositional systems. Additionally, it can support the modelling of the subsidence and incidentally the constraint of the hydrocarbon maturity of a given area. - A structural workflow used to quickly and accurately define major and secondary fault systems. The integration of the 3D structural interpretation results ensures the analysis of the fault networks kinematics which can affect hydrocarbon trapping mechanisms. The application of these integrated workflows brings new insight into two complex settings on the Australian North West Shelf and ensures the definition of astonishing stratigraphic and structural outcomes. The stratigraphic workflow ensures the 3D characterization of the Late Palaeozoic glacial depositional system on the Mermaid Nose (Dampier Subbasin, Northern Carnarvon Basin) that presents similarities with the glacial facies along the Neotethys margin up to Oman (chapter 3.1). A subsidence model reveals the Phanerozoic geodynamic evolution of this area (chapter 3.2) and emphasizes two distinct mode of regional extension for the Palaeozoic (Neotethys opening) and Mesozoic (abyssal plains opening). The structural workflow is used for the definition of the structural evolution of the Laminaria High area (Bonaparte Basin). Following a regional structural characterization of the Timor Sea (chapter 4.1), a thorough analysis of the Mesozoic fault architecture reveals a local rotation of the stress field and the development of reverse structures (flower structures) in extensional setting, that form potential hydrocarbon traps (chapter 4.2). The definition of the complex Neogene structural architecture associated with the fault kinematic analysis and a plate flexure model (chapter 4.3) suggest that the Miocene to Pleistocene reactivation phases recorded at the Laminaria High most probably result from the oblique normal reactivation of the underlying Mesozoic fault planes. This episode is associated with the deformation of the subducting Australian plate. Based on these results three papers were published in international journals and two additional publications will be submitted. Additionally this research led to several communications in international conferences. Although the different workflows presented in this research have been primarily developed and used for the analysis of specific stratigraphic and structural geobodies on the Australian North West Shelf, similar integrated 3D seismic approaches will have applications to hydrocarbon exploration and production phases; for instance increasing the recognition of potential source rocks, secondary migration pathways, additional traps or reservoir breaching mechanisms. The new elements brought by this research further highlight that 3D seismic data contains a tremendous amount of hidden geological information waiting to be revealed and that will undoubtedly bring new insight into depositional systems, structural evolution and geohistory of the areas reputed being explored and constrained and other yet to be constrained. The further development of 3D texture attributes highlighting specific features of the seismic signal, the integration of quantitative analysis for stratigraphic and structural processes, the automation of the interpretation workflow as well as the formal definition of "seismo-morphologic" characteristics of a wide range of geobodies from various environments would represent challenging examples of continuation of this present research. The 21st century will most probably represent a transition period between fossil and other alternative energies. The next generation of seismic interpreters prospecting for hydrocarbon will undoubtedly face new challenges mostly due to the shortage of obvious and easy targets. They will probably have to keep on integrating techniques and geological processes in order to further capitalise the seismic data for new potentials definition. Imagination and creativity will most certainly be among the most important quality required from such geoscientists.

Plate tectonics of the Altaids

Abstract: The Altaids consist in a huge accretionary-type belt extending from Siberia through Mon-golia, northern China, Kyrgyzstan and Kazakhstan. They were formed from the Vendian through the Jurassic by the accretion of numerous displaced and exotic terranes (e.g. island arc, ribbon microcontinent, seamount, basaltic plateau, back-arc basin). The number, nature and origin of the terranes differ according to the palaeotectonic models of the different authors. Thanks to a geo- dynamic study (i.e. definition of tectonic settings and elaboration of geodynamic scenarios) and plate tectonics modelling, this work aims to present an alternative model explaining the Palaeozoic palaeotectonic evolution of the Altaids. Based on a large set of compiled geological data related to palaeogeography and geodyna¬mic (e.g. sedimentology, stratigraphy, palaeobiogeography, palaeomagnetism, magmatism, me- tamorphism, tectonic...), a partly new classification of the terranes and sutures implicated in the formation of the Altaids is proposed. In the aim to elaborate plate tectonics reconstructions, it is necessary to fragment the present arrangement of continents into consistent geological units. To avoid confusion with existing terminology (e.g. tectonic units, tectono-stratigraphic units, micro- continents, terranes, blocks...), the new concept of "Geodynamic Units (GDU)" was introduced. A terrane may be formed by a set of GDUs. It consists of a continental and/or oceanic fragment which has its own kinematic and geodynamic evolution for a given period. With the same ap-proach, the life span and type of the disappeared oceans is inferred thanks to the study of the mate-rial contained in suture zones. The interpretation of the tectonic settings within the GDUs comple-ted by the restoration of oceans leads to the elaboration of geodynamic scenarios. Since the Wilson cycle was presented in 1967, numerous works demonstrated that the continental growth is more complex and results from diverse geodynamic scenarios. The identification of these scenarios and their exploitation enable to elaborate plate tectonics models. The models are self-constraining (i.e. space and time constraints) and contest or confirm in turn the geodynamic scenarios which were initially proposed. The Altaids can be divided into three domains: (1) the Peri-Siberian, (2) the Kazakhstan, and (3) the Tarim-North China domains. The Peri-Siberian Domain consists of displaced (i.e. Sayan Terrane Tuva-Mongolian, Lake-Khamsara Terrane) and exotic terranes (i.e. Altai-Mongolian and Khangai-Argunsky Terrane) accreted to Siberia from the Vendian through the Ordovician. Fol-lowing the accretion of these terranes, the newly formed Siberia active margin remained active un-til its part collision with the Kazakhstan Superterrane in the Carboniferous. The eastern part of the active margin (i.e. East Mongolia) continued to act until the Permian when the North-China Tarim Superterrane collided with it. The geodynamic evolution of the eastern part of the Peri-Siberian Domain (i.e. Eastern Mongolia and Siberia) is complicated by the opening of the Mongol-Okhotsk Ocean in the Silurian. The Kazakhstan Domain is composed of several continental terranes of East Gondwana origin amalgamated together during the Ordovician-Silurian time. After these different orogenic events, the Kazakhstan Superterrane evolved as a single superterrane until its collision with a Tarim-North China related-terrane (i.e. Tianshan-Hanshan Terrane) and Siberian Continent during the Devonian. This new organisation of the continents imply a continued active margin from Siberia, to North China through the Kazakhstan Superterrane and the closure of the Junggar- Balkash Ocean which implied the oroclinal bending of the Kazakhstan Superterrane during the entire Carboniferous. The formation history of the Tarim-North China Domain is less complex. The Cambrian northern passive margin became active in the Ordovician. In the Silurian, the South Tianshan back-arc Ocean was open and led to the formation of the Tianshan-Hanshan Terrane which collided with the Kazakhstan Superterrane during the Devonian. The collision between Siberia and the eastern part of the Tarim-North China continents (i.e. Inner Mongolia), implied by the closure of the Solonker Ocean, took place in the Permian. Since this time, the major part of the Altaids was formed, the Mongol-Okhotsk Ocean only was still open and closed during the Jurassic. Résumé: La chaîne des Altaïdes est une importante chaîne d'accrétion qui s'étend en Sibérie, Mon-golie, Chine du Nord, Kirghizstan et Kazakhstan. Elle s'est formée durant la période du Vendian au Jurassique par l'accrétion de nombreux terranes déplacés ou exotiques (par exemple arc océa-nique, microcontinent, guyot, plateau basaltique, basin d'arrière-arc...). Le nombre, la nature ou encore l'origine diffèrent selon les modèles paléo-tectoniques proposés par les différents auteurs. Grâce à une étude géodynamique (c'est-à-dire définition des environnements tectoniques et éla-boration de scénarios géodynamiques) et à la modélisation de la tectonique des plaques, ce travail propose un modèle alternatif expliquant l'évolution paléo-tectonique des Altaïdes. Basé sur une large compilation de données géologiques pertinentes en termes de paléo-géographie et de géodynamique (par exemple sédimentologie, stratigraphie, paléo-biogéographie, paléomagnétisme, magmatisme, métamorphisme, tectonique...), une nouvelle classification des terranes et des sutures impliqués dans la formation des Altaïdes est proposée. Dans le but d'élabo¬rer des reconstructions de plaques tectoniques, il est nécessaire de fragmenter l'arrangement actuel des continents en unités tectoniques cohérentes. Afin d'éviter les confusions avec la terminolo¬gie existante (par exemple unité tectonique, unité tectono-stratigraphique, microcontinent, block, terrane...), le nouveau concept d' "Unité Géodynamique (UGD)" a été introduit. Un terrane est formé d'une ou plusieurs UGD et représente un fragment océanique ou continental défini pas sa propre cinétique et évolution géodynamique pour une période donnée. Parallèlement, la durée de vie et le type des océans disparus (c'est-à-dire principal ou secondaire) est déduite grâce à l'étude du matériel contenu dans les zones de sutures. L'interprétation des environnements tectoniques des UGD associés à la restauration des océans mène à l'élaboration de scénarios géodynamiques. Depuis que le Cycle de Wilson a été présenté en 1967, de nombreux travaux ont démontré que la croissance continentale peut résulter de divers scénarios géodynamiques. L'identification et l'ex-ploitation de ces scénarios permet finalement l'élaboration de modèles de tectonique des plaques. Les modèles sont auto-contraignants (c'est-à-dire contraintes spatiales et temporelles) et peuvent soit contester ou confirmer les scénarios géodynamiques initialement proposés. Les Altaïdes peuvent être divisées en trois domaines : (1) le Domaine Péri-Sibérien, (2) le Domaine Kazakh, et (3) le Domaine Tarim-Nord Chinois. Le Domaine Péri-Sibérien est composé de terranes déplacés (c'est-à-dire Terrane du Sayan, Tuva-Mongol et Lake-Khamsara) et exotiques (c'est-à-dire Terrane Altai-Mongol et Khangai-Argunsky) qui ont été accrétés au craton Sibérien durant la période du Vendien à l'Ordovicien. Suite à l'accrétion de ces terranes, la marge sud-est de la Sibérie nouvellement formée reste active jusqu'à sa collision partielle avec le Superterrane Ka-zakh au Carbonifère. La partie est de la marge active (c'est-à-dire Mongolie de l'est) continue son activité jusqu'au Permien lors de sa collision avec le Superterrane Tarim-Nord Chinois. L'évolu¬tion géodynamique de la partie est du Domaine Sibérien est compliquée par l'ouverture Silurienne de l'Océan Mongol-Okhotsk qui disparaîtra seulement au Jurassique. Le Domaine Kazakh est composé de plusieurs terranes d'origine est-Gondwanienne accrétés les uns avec les autres avant ou pendant le Silurien inférieur et leurs evolution successive sous la forme d'un seul superterrane. Le Superterrane Kazakh collisione avec un terrane Tarim-Nord Chinois (c'est-à-dire Terrane du Tianshan-Hanshan) durant le Dévonien et le continent Sibérien au Dévonien supérieur. Ce nouvel agencement des plaques induit une marge active continue le long des continents Sibérien, Kazakh et Nord Chinois et la fermeture de l'Océan Junggar-Balkash qui provoque le plissement oroclinal du Superterrane Kazakh durant le Carbonifère. L'histoire de la formation du Domaine Tarim-Nord Chinois est moins complexe. La marge passive nord Cambrienne devient active à l'Ordovicien et l'ouverture Silurienne du bassin d'arrière-arc du Tianshan sud mène à la formation du terrane du Tianshan-Hanshan. La collision Dévonienne entre ce dernier et le Superterrane Kazakh provoque la fermerture de l'Océan Tianshan sud. Finalement, la collision entre la Sibérie et la partie est du continent Tarim-Nord Chinois (c'est-à-dire Mongolie Intérieure) prend place durant le Permien suite à la fermeture de l'Océan Solonker. La majeure partie des Altaïdes est alors formée, seul l'Océan Mongol-Okhotsk est encore ouvert. Ce dernier se fermera seulement au Jurassique.

A new classification of the Turkish terranes and sutures and its implication for the paleotectonic history of the region

The Turkish part of the Tethyan realm is represented by a series of terranes juxtaposed through Alpine convergent movements and separated by complex suture zones. Different terranes can be defined and characterized by their dominant geological background. The Pontides domain represents a segment of the former active margin of Eurasia, where back-arc basins opened in the Triassic and separated the Sakarya terrane from neighbouring regions. Sakarya was re-accreted to Laurasia through the Balkanic mid-Cretaceous orogenic event that also affected the Rhodope and Strandja zones. The whole region from the Balkans to the Caucasus was then affected by a reversal of subduction and creation of a Late Cretaceous arc before collision with the Anatolian domain in the Eocene. If the Anatolian terrane underwent an evolution similar to Sakarya during the Late Paleozoic and Early Triassic times, both terranes had a diverging history during and after the Eo-Cimmerian collision. North of Sakarya, the Küre back-arc was closed during the Jurassic, whereas north of the Anatolian domain, the back-arc type oceans did not close before the Late Cretaceous. During the Cretaceous, both domains were affected by ophiolite obduction, but in very different ways: north directed diachronous Middle to Late Cretaceous mélange obduction on the Jurassic Sakarya passive margin; Senonian synchronous southward obduction on the Triassic passive margin of Anatolia. From this, it appears that the Izmir-Ankara suture, currently separating both terranes, is composite, and that the passive margin of Sakarya is not the conjugate margin of Anatolia. To the south, the Cimmerian Taurus domain together with the Beydağları domain (part of the larger Greater Apulian terrane), were detached from north Gondwana in the Permian during the opening of the Neotethys (East-Mediterranean basin). The drifting Cimmerian blocks entered into a soft collision with the Anatolian and related terranes in the Eo-Cimmerian orogenic phase (Late Triassic), thus suturing the Paleotethys. At that time, the Taurus plate developed foreland-type basins, filled with flysch-molasse deposits that locally overstepped the lower plate Taurus terrane and were deposited in the opening Neotethys to the south. These olistostromal deposits are characterized by pelagic Carboniferous and Permian material from the Paleotethys suture zone found in the Mersin mélange. The latter, as well as the Antalya and Mamonia domains are represented by a series of exotic units now found south of the main Taurus range. Part of the Mersin exotic material was clearly derived from the former north Anatolian passive margin (Huğlu-type series) and re-displaced during the Paleogene. This led us to propose a plate tectonic model where the Anatolian ophiolitic front is linked up with the Samail/Baër-Bassit obduction front found along the Arabian margin. The obduction front was indented by the Anatolian promontory whose eastern end was partially subducted. Continued slab roll-back of the Neotethys allowed Anatolian exotics to continue their course southwestward until their emplacement along the Taurus southern margin (Mersin) and up to the Beydağları promontory (Antaya-Mamonia) in the latest Cretaceous-Paleocene. The supra-subduction ocean opening at the back of the obduction front (Troodos-type Ocean) was finally closed by Eocene north-south shortening between Africa and Eurasia. This brought close to each other Cretaceous ophiolites derived from the north of Anatolia and those obducted on the Arabian promontory. The latter were sealed by a Maastrichtian platform, and locally never affected by Alpine tectonism, whereas those located on the eastern Anatolian plate are strongly deformed and metamorphosed, and affected by Eocene arc magmatism. These observations help to reconstruct the larger frame of the central Tethyan realm geodynamic evolution.

Palaeozoic deformation and magmatism in the northern area of the Anatolide block (Konya), witness of the Palaeotethys active margin

The study area. located north of Konva (Central Turkey), is composed of Silurian to Cretaceous metamorphosed rocks. The lower unit of the oldest formation (Silurian-Early Permian) is mostly made up of Silurian-Early Carboniferous metacarbonates. These rocks pass laterally and vertically to Devonian-Early Permian series having continental margin, shallow water and pelagic characteristics. They are intruded or juxtaposed to different kinds of metamagmatic rocks. which show MORB. continental arc and within plate characteristics. The Palaeozoic units are covered unconformably by Triassic-Cretaceous metasedimentary units. All these rocks are overthrusted by Mesozoic ophiolites. The Palaeozoic sequence can be seen as a northern Palaeotethys passive, then active margin. The northward subduction of the Palaeotethys ocean during the Carboniferous-Triassic times, induced the development of a magmatic arc and fore-arc sequence (Carboniferous-Permian). Before the Early Triassic (?Late Permian) time. the fore-arc sequence was uplifted above sea level and eroded. The Triassic sequences are regarded as marking the onset of back-arc opening and detachment of the Anatolian Konya block from the active Eurasian margin. Finally. a suture zone formed during the Carman between the Konya region and the Menderes-Tauride Cimmerian block due to the closing of Palaeotethvs. This geodynamic evolution can be correlated with the evolution of the Karaburun sequence in western Turkey.