Comparing the schedulers and power saving strategies with SPARTS

We have developed SPARTS, a simulator of a generic embedded real-time device. It is designed to be extensible to accommodate different task properties, scheduling algorithms and/or hardware models for the wide variety of applications. SPARTS was developed to help the community investigate the behaviour of the real-time embedded systems and to quantify the associated constraints/overheads.

Saving energy in the GFRP pultrusion process

This study addresses to the optimization of pultrusion manufacturing process from the energy-consumption point of view. The die heating system of external platen heaters commonly used in the pultrusion machines is one of the components that contribute the most to the high consumption of energy of pultrusion process. Hence, instead of the conventional multi-planar heaters, a new internal die heating system that leads to minor heat losses is proposed. The effect of the number and relative position of the embedded heaters along the die is also analysed towards the setting up of the optimum arrangement that minimizes both the energy rate and consumption. Simulation and optimization processes were greatly supported by Finite Element Analysis (FEA) and calibrated with basis on the temperature profile computed through thermography imaging techniques. The main outputs of this study allow to conclude that the use of embedded cylindrical resistances instead of external planar heaters leads to drastic reductions of both the power consumption and the warm-up periods of the die heating system. For the analysed die tool and process, savings on energy consumption up to 60% and warm-up period stages less than an half hour were attained with the new internal heating system. The improvements achieved allow reducing the power requirements on pultrusion process, and thus minimize industrial costs and contribute to a more sustainable pultrusion manufacturing industry.

Race-to-halt energy saving strategies

Energy consumption is one of the major issues for modern embedded systems. Early, power saving approaches mainly focused on dynamic power dissipation, while neglecting the static (leakage) energy consumption. However, technology improvements resulted in a case where static power dissipation increasingly dominates. Addressing this issue, hardware vendors have equipped modern processors with several sleep states. We propose a set of leakage-aware energy management approaches that reduce the energy consumption of embedded real-time systems while respecting the real-time constraints. Our algorithms are based on the race-to-halt strategy that tends to run the system at top speed with an aim to create long idle intervals, which are used to deploy a sleep state. The effectiveness of our algorithms is illustrated with an extensive set of simulations that show an improvement of up to 8% reduction in energy consumption over existing work at high utilization. The complexity of our algorithms is smaller when compared to state-of-the-art algorithms. We also eliminate assumptions made in the related work that restrict the practical application of the respective algorithms. Moreover, a novel study about the relation between the use of sleep intervals and the number of pre-emptions is also presented utilizing a large set of simulation results, where our algorithms reduce the experienced number of pre-emptions in all cases. Our results show that sleep states in general can save up to 30% of the overall number of pre-emptions when compared to the sleep-agnostic earliest-deadline-first algorithm.

VO2 thin films and nanoparticles for energy-saving applications in architectural elements

Vanadium dioxide (VO2) is a promising material with large interest in construction industry and architecture, due to its thermochromic properties. This material may be used to create "smart" coatings that result in improvements in the buildings energy efficiency, by reducing heat exchanges and, consequently, the need for acclimatization. In this work, VO2 thin films and coatings were produced and tested in laboratory, to apply in architectural elements, such as glass, rooftop tiles and exterior paints. Thin films were produced by RF magnetron sputtering and VO2 nanoparticles were obtained through hydrothermal synthesis, aiming to create "smart" windows and tiles, respectively. These coatings have demonstrated the capability to modulate the transmittance of infrared radiation by around 20%. The VO2 nanoparticle coatings were successfully applied on ceramic tiles. The critical temperature was reduced to around 40ºC by tungsten doping. Ultimately, two identical house models were built, in order to test the VO2 coatings, in real atmospheric conditions during one of the hottest months of the year, in Portugal – August.

The role of guarantees in pension plan design: Pension saving decisions

This study centers on the assessment of psychological value of guarantees in pension products and the behavior biases associated with choice. When a guarantee on a product increases from 99% to 99,5% less than half of respondents show willingness to pay in contrast with 73% when going from 99,5% to 100%. Out of 105 respondents, 55 show that their choices concerning pension products are inconsistent with classic utility theory. Financial background proves insignificant thus pointing to behavioral biases. As individuals make choices that leave them worse-off, we argue that pension plan design would highly benefit from public policy interventions.

Democratization as a cost-saving device

We propose a theoretical analysis of democratization processes in which an elite extends the franchise to the poor when threatened with a revolution. The poor could govern without changing the political system by maintaining a continuous revolutionary threat on the elite. Revolutionary threats, however, are costly to the poor and democracy is a superior sys- tem in which political agreement is reached through costless voting. This provides a rationale for democratic transitions that has not been discussed in the literature.

Saving and Re-building Lives: an Analysis of the Determinants of Disaster Relief

We analyse both theoretically and empirically, the factors that influence the amount of humanitarian aid which countries receive when they are struck by natural disasters. Our investigation particularly distinguishes between immediate disaster relief which helps the survival of victims and long term humanitarian aid given towards reconstruction and rehabilitation. The theoretical model is able to make predictions as well as explain some of the peculiarities in the empirical results. The empirical analysis, making use of some useful data sources, show that both short and long term humanitarian aid increase with number of people killed, financial loss and level of corruption, while GDP per capita has no effect. Number of people affected had no effect on short term aid, but significantly increased long term aid. Both types of aid increased if the natural disaster was an earthquake, tsunami or drought. In addition, short term aid increases in response to a flood while long term aid increases in response to storms.

Empirical testing of genuine savings as an indicator of weak sustainability: a three-country analysis of long run trends

Genuine Savings has emerged as a widely-used indicator of sustainable development. In this paper, we use long-term data stretching back to 1870 to undertake empirical tests of the relationship between Genuine Savings (GS) and future well-being for three countries: Britain, the USA and Germany. Our tests are based on an underlying theoretical relationship between GS and changes in the present value of future consumption. Based on both single country and panel results, we find evidence supporting the existence of a cointegrating (long run equilibrium) relationship between GS and future well-being, and fail to reject the basic theoretical result on the relationship between these two macroeconomic variables. This provides some support for the GS measure of weak sustainability. We also show the effects of modelling shocks, such as World War Two and the Great Depression.

Genuine savings and future well-being in Germany, 1850-2000

Genuine Savings (GS), also known as ‘net adjusted savings’, is a composite indicator of the sustainability of economic development. Genuine Savings reflects year-on-year changes in the total wealth or capital of a country, including net investment in produced capita, investment in human capital, depletion of natural resources, and damage caused by pollution. A negative Genuine Savings rate suggests that the stock of national wealth is declining and that future utility must be less than current utility, indicating that economic development is non-sustainable (Hamilton and Clemens, 1999). We make use of data over a 150 year period to examine the relationship between Genuine Savings and a number of indicators of well-being over time, and compare the relative changes in human, produced, and components of natural capital over the period. Overall, we find that the magnitude of genuine savings is positively related to changes in future consumption, with some evidence of a cointegrating relationship. However, the relationships between genuine savings and infant mortality or average heights are less clear.

A two-sector growth model with institutional saving and investment

This paper develops a two-sector growth model in which institutional investors play a significant role. A necessary and sufficient condition is established under which these investors own the entire capital stock in the long run. The dependence of the long-run growth rate on the behaviour of such investors, and the effects of a productivity increase are analysed.

Saving Mothers' Lives 2003-2005

This, the seventh Report of the Confidential Enquiries into Maternal Deaths in the United Kingdom (UK) enquires into maternal deaths and has a new title, "Saving Mothers' Lives". The change has been made to more accurately reflect the purpose of this, the longest running example of a maternal death review in the world. The Enquiry's aim is to stimulate and promote beneficial clinical actions and health and social service changes that will save yet more mothers' and babies' lives in future. By acting on the recommendations and results contained in the Report, the inequalities in pregnancy outcomes that currently exist between the most advantaged and most vulnerable and excluded mothers and babies in society should reduce, as should the numbers of those who suffer the consequences of severe morbidity.In addition, and perhaps of most importance, all mothers, infants and families will benefit from accessiblematernity services whose staff are proud to provide them with the safest and best possible individualised care that meets all their medical and other needs.

Saving Mothers' Lives 2006-2008

The eighth Report of the Confidential Enquiries into Maternal Deaths in the UK investigates the deaths of 261 women who died in the triennium 2006-08, from causes directly or indirectly related to pregnancy. The full Report is available for purchase or download from the Centre for Maternal and Child Enquiries (CMACE; www.cmace.org.uk). Although every maternal death is a tragedy, particularly where avoidable factors were identified by the Enquiry process, the overall picture is encouraging. The maternal death rate in the UK continues to decline despite increasing pressures on maternity services and a changing maternal population. For the first time there has been a reduction in the inequalities gap between women living in different socio-economic circumstances, and timely production of guidelines and tools appears to have helped clinical staff to deliver improved clinical care.

Building energy saving techniques and indoor air quality : a dilemma

In European countries and North America, people spend 80 to 90% of time inside buildings and thus breathe indoor air. In Switzerland, special attention has been devoted to the 16 stations of the national network of observation of atmospheric pollutants (NABEL). The results indicate a reduction in outdoor pollution over the last ten years. With such a decrease in pollution over these ten years the question becomes: how can we explain an increase of diseases? Indoor pollution can be the cause. Indoor contaminants that may create indoor air quality (IAQ) problems come from a variety of sources. These can include inadequate ventilation, temperature and humidity dysfunction, and volatile organic compounds (VOCs). The health effects from these contaminants are varied and can range from discomfort, irritation and respiratory diseases to cancer. Among such contaminants, environmental tobacco smoke (ETS) could be considered the most important in terms of both health effects and engineering controls of ventilation. To perform indoor pollution monitoring, several selected ETS tracers can be used including carbon monoxide (CO), carbon dioxide (CO2), respirable particles (RSP), condensate, nicotine, polycyclic aromatic hydrocarbons (PAHs), nitrosamines, etc. In this paper, some examples are presented of IAQ problems that have occurred following the renewal of buildings and energy saving concerns. Using industrial hygiene sampling techniques and focussing on selected priority pollutants used as tracers, various problems have been identified and solutions proposed. [Author]