982 resultados para Genesee Pure Food Co.
Resumo:
This paper explores in particular how Teikei groups, as forms of Community Supported Agriculture (CSA), operate in Japan, focussing on one particular group. The paper links the Teikei approach to debates around social capital and consumer-citizenship, arguing that pre-existing consumer/citizen institutions may usefully be engaged in developing food citizenship and CSA operations. The discussion is linked to CSA and various other alternative food networks (AFNs) that have grown up in various forms in Japan, the US, the UK and elsewhere in Europe over the past thirty years or so. CSA in similar fashion to Teikei involves bringing producers and consumers closer together in terms of reconnecting the agricultural producer and consumer to aid food traceability and quality (including organic). CSA also exhibits elements of new assemblies of agricultural governance based on enhanced consumer-citizenship where consumers, to varying degrees, have a say in what and how produce is grown and how the land is managed.
Resumo:
The influence of food abundance, larval density and interspecific interactions on the survival and body size of Chrysomya albiceps, Chrysomya megacephala and Cochliomyia macellaria was investigated in pure and mixed cultures, to determine the impact of competition and/or facultative predation on native and introduced blowfly species in South America. In mixed cultures there was complete elimination of C. megacephala and C. macellaria. Chrysomya albiceps exhibited higher survival in mixed compared to pure cultures, suggesting that predation offers more advantages than competition for food. Body size of C. albiceps was significantly affected by food scarcity in pure cultures. However, tibia size in males of all species suffered no significant variation as a function of food scarcity. The implications of these results for population dynamics of introduced and native blowfly species are discussed.
Resumo:
The organic acids profile, sugar metabolism and biomass growth of Streptococcus thermophilus (St) and Bifidobacterium lactis (BI) have been studied in pure cultures or binary co-culture (St-BI) in skim milk either containing 40 mg/g of inulin or not. With inulin, the time required by St. BI and St-BI to complete fermentation (i.e., when the pH reached 4.5) was about 14, 8 and 49% shorter than without inulin, respectively. This prebiotic also enhanced the levels of lactic and acetic acids and volatile compounds, showing a positive synbiotic effect between pre- and probiotics. In particular, the St-BI co-culture showed final concentrations of both microorganisms about 15 and 38% higher than in their respective pure cultures, thus highlighting a clear synergistic effect between these microorganisms due to mutual interactions. In addition, the well-known bifidogenic effect of inulin was confirmed. (c) 2012 Elsevier Ltd. All rights reserved.
Resumo:
Metabolic studies are very important to improve quality of functional dairy products. For this purpose, the behaviors of pure cultures of Streptococcus thermophilus (St) and Lactobacillus rhamnosus (Lr) as well a co-culture of them (St-Lr) were investigated during skim milk fermentation, and the inulin effect as prebiotic was assessed. Lr was able to metabolize 6 g/100 g more galactose than St and St-Lr. Final lactic acid production by Lr was higher (9.8 g/L) compared to St (9.1 g/L) and St-Lr (9.1 g/L). Acetic acid concentration varied from 0.8 g/L (St-Lr) to 1.5 g/L (Lr) and that of ethanol from only 0.2 g/L (St-Lr) to 0.4 g/L (Lr), which suggests the occurrence in Lr of a NADH oxidase activity and citrate co-metabolization via pyruvate, both dissipating a part of the reducing power. Diacetyl and acetoin accumulated at the highest levels (18.4 and 0.8 mg/L, respectively) with St-Lr, which suggests possible synergistic interactions between these microorganisms as well as the Lr capability of co-metabolizing citrate in the presence of lactose. Inulin stimulated both biomass growth and levels of all end-products, as the likely result of fructose release from its partial hydrolysis and subsequent metabolization as an additional carbon and energy source. Crown Copyright (C) 2012 Published by Elsevier Ltd. All rights reserved.
Resumo:
The aim of the first part of this thesis was to evaluate the effect of trans fatty acid- (TFA), contaminant, polycyclic aromatic hydrocarbon (PAH)- and oxidation productenriched diets on the content of TFA and conjugated linoleic acid (CLA) isomers in meat and liver of both poultry and rabbit. The enriched feedings were prepared with preselected fatty co-and by-products that contained low and high levels of TFA (low, palm fatty acid distillate; high, hydrogenated palm fatty acid distillate), environmental contaminants (dioxins and PCBs) (two different fish oils), PAH (olive oil acid oils and pomace olive oil from chemical refining, for low and high levels) and oxidation products (sunflower-olive oil blend before and after frying), so as to obtain single feedings with three enrichment degrees (high, medium and low) of the compound of interest. This experimental set-up is a part of a large, collaborative European project (http://www.ub.edu/feedfat/), where other chemical and health parameters are assessed. Lipids were extracted, methylated with diazomethane, then transmethylated with 2N KOH/methanol and analyzed by GC and silver-ion TLC-GC. TFA and CLA were determined in the fats, the feedings, meat and liver of both poultry and rabbit. In general, the level of TFA and CLA in meat and liver mainly varied according to those originally found in the feeding fats. It must be pointed out, though, that TFA and CLA accumulation was different for the two animal species, as well as for the two types of tissues. The TFA composition of meat and liver changes according to the composition of the oils added to the feeds with some differences between species. Chicken meat with skin shows higher TFA content (2.6–5.4 fold) than rabbit meat, except for the “PAH” trial. Chicken liver shows higher TFA content (1.2–2.1 fold) than rabbit liver, except for the “TRANS” and “PAH” trials. In both chicken and rabbit meats, the TFA content was higher for the “TRANS” trial, followed by the “DIOXIN” trial. Slight differences were found on the “OXIDATION” and “PAH” trends in both types of meats. In both chicken and rabbit livers, the TFA content was higher for the “TRANS” trial, followed by those of the “PAH”, “DIOXIN” and “OXIDATION” trials. This trend, however, was not identical to that of feeds, where the TFA content varied as follows: “TRANS” > “DIOXIN” >“PAH” > “OXIDATION”. In chicken and rabbit meat samples, C18:1 TFA were the most abundant, followed by C18:2 TFA and C18:3 TFA, except for the “DIOXIN” trial where C18:3 TFA > C18:2 TFA. In chicken and rabbit liver samples of the “TRANS” and “OXIDATION” trials, C18:1 TFA were the most abundant, followed by C18:2 TFA and C18:3 TFA, whereas C18:3 TFA > C18:2 in the “DIOXIN” trial. Slight differences were found on the “PAH” trend in livers from both species. The second part of the thesis dealt with the study of lipid oxidation in washed turkey muscle added with different antioxidants. The evaluation on the oxidative stability of muscle foods found that oxidation could be measured by headspace solid phase microestraction (SPME) of hexanal and propanal. To make this method effective, an antioxidant system was added to stored muscle to stop the oxidative processes. An increase in ionic strength of the sample was also implemented to increase the concentration of aldehydes in the headspace. This method was found to be more sensitive than the commonly used thiobarbituric acid reactive substances (TBARs) method. However, after antioxidants were added and oxidation was stopped, the concentration of aldehydes decreased. It was found that the decrease in aldehyde concentration was due to the binding of the aldehydes to muscle proteins, thus decreasing the volatility and making them less detectable.
Resumo:
A pilot-scale study was completed to determine the feasibility of high-solids anaerobic digestion (HSAD) of a mixture of food and landscape wastes at a university in central Pennsylvania (USA). HSAD was stable at low loadings (2g COD/L-day), but developed inhibitory ammonia concentrations at high loadings (15g COD/L-day). At low loadings, methane yields were 232L CH4/kg COD fed and 229L CH4/kg VS fed, and at high loadings yields were 211L CH4/kg COD fed and 272L CH4/kg VS fed. Based on characterization and biodegradability studies, food waste appears to be a good candidate for HSAD at low organic loading rates; however, the development of ammonia inhibition at high loading rates suggests that the C:N ratio is too low for use as a single substrate. The relatively low biodegradability of landscape waste as reported herein made it an unsuitable substrate to increase the C:N ratio. Codigestion of food waste with a substrate high in bioavailable carbon is recommended to increase the C:N ratio sufficiently to allow HSAD at loading rates of 15g COD/L-day. Copyright 2014 Elsevier Ltd. All rights reserved.
Resumo:
During the last two years of World War I food supply in Switzerland declined and caused shortcomings in consume, leading to social distress and conflict. Mainly two important factors caused these problems: First, Switzerland was highly dependent on food imports and during the war traditional supply lines faded. Second, weather extremes in the years 1916–1917 caused crop failure all over Europe and North America, which intensified the decline of food trade between the nations. In 1918 a conflict between classic urban consumers, such as workers, and famers erupted due to the food shortcomings and led to a lasting discord between urban and agrarian regions in Switzerland. But there was not only disharmony and conflict between the urban and agrarian regions. As a matter of fact several agents (urban and agrarian) interested in presenting adequate coping strategies to overcome the food shortages developed ideas of alternative ways of food production and supply since 1917. The aim of the paper is to outline these strategies that were undertaken to create a new era of food production that was not solely dependent on the agrarian sector or the import-trade. Actual growing of vegetables in estate areas is an important, but just one, factor of establishing a new system of food production, distribution and consume. The market-leading grocery stores in Switzerland nowadays (Coop and Migros) started their business during that time as co-operatives establishing new forms of distribution and food-production. So the interest of the paper is not only in actual «urban farming», but it wants to share some light on how swiss urban and agrarian spheres overlapped their functions in order to create a modern system of agro food-chains at the beginning of the interwar period.
Resumo:
Mode of access: Internet.
Resumo:
We describe a polygeneration system that can run on neat plant oils, such as Jatropha and Pongamia, or standard diesel fuel. A prototype has been constructed using a compression ignition engine of 9.9 kW shaft output. It consumes 3 L/h of fuel and will produce 40 kg/h of ice by means of an adsorption refrigerator powered from the engine jacket heat. Steaming of rice, deep and shallow frying, and other types of food preparation heated by the exhaust gas have been demonstrated. In addition, the feasibility of producing distilled water by means of multiple-effect distillation powered by the engine waste heat is shown. Overall plant efficiency and potential savings in greenhouse gas emissions are discussed. © 2012 Elsevier Ltd.
Resumo:
Date of Acceptance: 01/06/2015 We thank the University of Aberdeen for financial support and A.I. McNab (University of Aberdeen) for discussions involving the calculation of surface sites.
Resumo:
Date of Acceptance: 01/06/2015 We thank the University of Aberdeen for financial support and A.I. McNab (University of Aberdeen) for discussions involving the calculation of surface sites.
Resumo:
Date of Acceptance: 01/06/2015 We thank the University of Aberdeen for financial support and A.I. McNab (University of Aberdeen) for discussions involving the calculation of surface sites.
Resumo:
The interest in using titanium to fabricate removable partial denture (RPD) frameworks has increased, but there are few studies evaluating the effects of casting methods on clasp behavior. OBJECTIVE: This study compared the occurrence of porosities and the retentive force of commercially pure titanium (CP Ti) and cobalt-chromium (Co-Cr) removable partial denture circumferential clasps cast by induction/centrifugation and plasma/vacuum-pressure. MATERIAL AND METHODS: 72 frameworks were cast from CP Ti (n=36) and Co-Cr alloy (n=36; control group). For each material, 18 frameworks were casted by electromagnetic induction and injected by centrifugation, whereas the other 18 were casted by plasma and injected by vacuum-pressure. For each casting method, three subgroups (n=6) were formed: 0.25 mm, 0.50 mm, and 0.75 mm undercuts. The specimens were radiographed and subjected to an insertion/removal test simulating 5 years of framework use. Data were analyzed by ANOVA and Tukey's to compare materials and cast methods (α=0.05). RESULTS: Three of 18 specimens of the induction/centrifugation group and 9 of 18 specimens of plasma/vacuum-pressure cast presented porosities, but only 1 and 7 specimens, respectively, were rejected for simulation test. For Co-Cr alloy, no defects were found. Comparing the casting methods, statistically significant differences (p<0.05) were observed only for the Co-Cr alloy with 0.25 mm and 0.50 mm undercuts. Significant differences were found for the 0.25 mm and 0.75 mm undercuts dependent on the material used. For the 0.50 mm undercut, significant differences were found when the materials were induction casted. CONCLUSION: Although both casting methods produced satisfactory CP Ti RPD frameworks, the occurrence of porosities was greater in the plasma/vacuum-pressure than in the induction/centrifugation method, the latter resulting in higher clasp rigidity, generating higher retention force values.
Resumo:
Realizou-se um estudo retro e prospectivo em 117 cães com prontuários suspeitos de apresentarem hipersensibilidade alimentar. Os animais foram distribuídos em dois grupos: os do grupo I (n=86) foram atendidos em 1993 e 1994 e os do grupo II (n=31) em 1995. Os cães de ambos os grupos foram caracterizados quanto aos aspectos epidemiológicos e clínicos. Os do grupo II foram submetidos a exames complementares para a diferenciação diagnóstica do prurido, incluindo: hemograma, micológico e parasitológico cutâneo, coproparasitológico, histológico de pele e sorológicos - RAST (radioimunoensaio) e ELISA (ensaio imunoenzimático) - ambos para determinação de IgE contra antígenos alimentares -, e ao exame da dieta de eliminação seguida pela exposição provocativa. Este último exame foi o mais confiável para o estabelecimento do diagnóstico, ao determinar que 20 cães, provenientes de ambos os grupos, eram alérgicos a alimentos. Pelos RAST e ELISA, não foi possível demonstrar resultados confiáveis quando comparados aos resultados com a dieta de eliminação. Os animais acometidos foram principalmente machos, com raça definida e na faixa etária de um a seis anos. Os principais alimentos incriminados foram a carne bovina, o arroz e a carne de frango.