A comparative study of the species composition of discards from five fisheries from the Algarve (southern Portugal)

Discards from five of the most important fisheries (crustacean trawling, fish trawling, demersal purse seining, pelagic purse seining and trammel netting) in southern Portugal were studied and compared. A total of 236 species of all taxa were discarded, with fish and cephalopods accounting for more than 90% of the discarded biomass, except trammel nets (81%). Although there was some overlapping of species, multivariate analysis using cluster analysis for classification and multidimensional scaling (MDS) for ordination, showed that there were significant differences between the five gears in terms of species composition and biomasses discarded, with the least similarity between crustacean trawling and all other fishing operations. The differences between fisheries were probably as a result of a combination of gear selectivity and depth fished. The results suggest that discarding practices are likely to have different, yet significant impacts on the marine ecosystem, warranting further studies on the fate of discards, the factors influencing discarding and mitigation.

Non-commercial invertebrate discards in an experimental trammel net fishery

Non-commercial invertebrate discards in an experimental trammel net fishery were studied in relation to selectivity of the gear, depth, soak time and season. Forty experimental fishing trials were carried out over a 1-year period with six combinations of small mesh (100, 120 and 140 mm) inner and large mesh (600 and 800 mm) outer panels. On average, 43.8 +/- 12.2 (SD) (individuals 1000 m(-1) of net) of non-commercial invertebrates were discarded, accounting for 48% and 65% of the total catch and total discards by numbers, respectively. Within non-commercial invertebrates discards, the six most abundant species by number were Phallusia mammillata (Cuvier) (27.5%), Cymbium olla (L.) (13.0%), Sphaerechinus granularis (Lamarck) (11.3%), Paracentrotus lividus (Lamarck) (10.9%), Astropartus mediterraneus (Risso) (8.2%) and Astropecten aranciacus (L.) (8.1%); Echinoderms (43.1%) particularly important. The highest and lowest discard ratios were found in autumn and winter, respectively. Discards generally decreased with depth, varied considerably in relation to soak time and were not related to mesh size combinations. Trammel nets seem to be the most important gear in terms of ecological impacts on benthic invertebrates compared with other coastal fishing gears and at the depths studied (15-60 m).

Reducing discards in a demersal purse-seine fishery

Fisheries bycatches and discards constitute a significant problem in many fisheries worldwide. Unlike the pelagic purse-seine, the demersal purse seine usually targets high commercial value demersal species such as sea breams ( e. g., Diplodus spp., Pagellus spp., Sparus aurata) and the European sea bass ( Dicentrarchus labrax), while discards consist mainly of pelagic species and juveniles of the above mentioned species. In order to evaluate the efficiency of a selectivity device in reducing bycatch and consequently of discards in a demersal purse seine fishery, experimental deployments were carried out. The bycatch reducing device (BRD) consisted in the use of a panel of diamond-shaped mesh netting of 70 mm stretched mesh in the posterior part of the purse seine. Data from 61 experimental fishing trials allowed the evaluation of discards, with Scomber japonicus, Boops boops, Sardina pilchardus, Diplodus bellottii and Belone belone being the main discarded species. The mean discard ratio per set was 0.49 (+/- 0.30 standard deviation). The causes for discarding were also identified, with low commercial value being the most important reason. The results of the trials with BRD, were promising, with an average of 49% (+/- 24%) of the fish escaping per set, especially from those species that are most discarded. Overall, the use of this method for reducing discards can be considered positive for the following reasons: there is no need for structural modification of the fishing gear, the BRD is easy to deploy, and it is efficient in terms of species, sizes and quantities of fish that manage to escape. It therefore has significant benefits for the demersal purse seine fishery and possibly for other "metiers" as well.

No evidence of bias from fish behavior in the selectivity of size and sex of the protogynous red porgy (Pagrus pagrus, Sparidae) by hook-and-line gear

Most fisheries select the size of fish to be caught (are size selective), and many factors, including gear, market demands, species distributions, fishery laws, and the behavior of both fishermen and fish, can contribute to that selectivity. Most fishing gear is size-selective and some, such as gill nets, are more so than others. The targeting behavior of fishermen is another key reason commercial and recreational fisheries tend to be size-selective. The more successful fishermen constantly seek areas and methods that yield larger or more profitable sizes of fish. Fishery regulations, especially size limits, produce size-selective harvests. Another factor with the potential to cause selectivity in a hook-and-line fishery is the different behavioral responses of fish to the bait or lure, whether the different responses arise among different fish sizes or between the sexes.

Studies on the exploratory trawl fishing and significance of selectivity in trawl fishing gear for conservation of marine fishery resources with special reference to the inshore waters off Mangalore

School of Industrial Fisheries, Cochin University of Science and Technology

Comparative fixed gear studies in the Cyclades (Aegean Sea): size selectivity of small-hook longlines and monofilament gill nets

Fishing trials with monofilament gill nets and longlines using small hooks were carried out at the same fishing grounds in Cyclades (Aegean Sea) over 1 year. Four sizes of MUSTAD brand, round bent, flatted sea hooks (Quality 2316 DT, numbers 15, 13, 12 and 11) and four mesh sizes of 22, 24, 26 and 28 turn nominal bar length monofilament gill nets were used. Significant differences in the catch size frequency distributions of the two gears were found for four out of five of the most important species caught by both the gears (Diplodus annularis, Diplodus vulgaris, Pagellus erythrinus, Scorpaena porcus and Serranus cabrilla), with longlines catching larger fish and a wider size range than gill nets. Whereas longline catch size frequency distributions for most species for the different hook sizes were generally highly overlapped, suggesting little or no differences in size selectivity, gill net catch size frequency distributions clearly showed size selection, with larger mesh sizes catching larger fish. A variety of models were fitted to the gill net data, with the lognormal providing the best fit in most cases. A maximum likelihood method was also used to estimate the parameters of the logistic model for the longline data. Because of the highly overlapped longline catch size frequency distributions parameters could only be estimated for two species. This study shows that the two static gears have different impacts in terms of size selection. This information will be useful for the more effective management of these small-scale, multi-species and multi-gear fisheries. (C) 2002 Elsevier Science B.V. All rights reserved.

Estimates of commercial longline selectivity for Pacific halibut (Hippoglossus stenolepis) from multiple marking experiments

The term “selectivity” refers to the relationship between the size (or age) of a fish and its vulnerability to a given kind of fishing gear. A selectivity schedule, along with other parameters, is normally estimated in the course of fitting a stock assessment model, and the estimated schedule can have a large effect on both the estimate of present stock abundance and the choice of an appropriate harvest rate. The form of the relationship is usually not known and not well determined by the data, and equally good model fits can often be obtained with different plausible specifications of selectivity. Choosing among the model fits and associated abundance estimates in this situation is problematic (Sigler, 1999; Sullivan et al., 19

Study on fishing gears, species selectivity toward gears and catch composition of BSKB beel, Khulna, Bangladesh

An investigation on the types of fishing gear used and their species selectivity and effects on fishes of BSKB beel in Khulna was conducted from June '95 to January '96. Fishermen were found to follow 6 fishing techniques viz., netting, trapping, angling, spearing, dewatering and hand picking. Among them 23 types of the fishing gear was recorded to be used by the fishermen of which 7, 8, 4 and 4 are nets, traps, hooks and lines, and hand harpoon respectively. A total of 47 species of fish were identified in the catches of different gears used by the fishermen in BSKB beel. Particulars, mode of operation, fishing season and catch composition of different fishing gears were determined. Seine, cast and lift net, traps (charo, arinda and ghuni), and hooks and lines (dhawn and nol broshi) were recorded as nonselective gear considering the fish species caught. However, gill nets (punti, koi and fash jal), clasp nets (bhuti jal), some traps (khadom, tubo), hooks and lines (chip borshi, chasra) and all spears were used as more or less selective gear. With respect to species and its size fash jal, bhuti jal, trap (khadom, ramani), and koach, juti and jhupi among spears were regarded to be more or less large-species-gear. But punti jal, koi jal, trap (koi dughair, charo, tubo, arinda and ghuni), nol borshi and spear (ful-kuchi) were small-species-gear. Among all gears seine net, cast net, lift net, koi dughair and ramani were recorded deleterious for carps especially for stocked fingerlings. For relatively small sized wild fishes koi jal, punti jal and ghuni traps were identified as detrimental gear.

Selectivity of gill nets for Hilsa toli and Pampus argentus

Fishing conducted off Saurashtra coast during 1971-74 with 27 units of nylon gill nets using 210/2/3, 210/3/3 and 210/4/3 twines with 51, 57 and 63 mm bar mesh and 0.70, 0 60 and 0.50 hanging coefficients have helped in standardizing an optimum gear for exploitation of commercial size group of Hilsa toli and Pampus argenteus. Gill nets of 210/2/3 with 51 mm bar mesh and 0.60 hanging coefficient for Hilsa toli and 210/2/3 with 63 mm bar and 0.60 hanging coefficient for Pampus argenteus are recommended for the commercial exploitation of these two species of fishes.

The estimation and improvement of the selectivity in crustacean and fish trawls

Tese de dout., Ciências e Tecnologias das Pescas, Faculdade de Ciências do Mar e do Ambiente, Univ. do Algarve, 2003

Studies on the technological aspects and economic efficiency of trawl gear operating along the Cochin coast

Trawling, despite being heavily energy expensive, still continues to be the most energy expensive fishing method particularly so in View of the export oriented nature of the Indian seafood industry. This study therefore aims at analyzing the efficiency of trawls operation from Cochin, an important fishing center along the southwest coast of India. The analysis is made along two perspectives - economic and technological. Even though technological efficiency complement economic efficiency, in the fishing parlance, parameters like the size composition of the catch, selectivity factors, etc., will have a direct bearing on the technological qualities of the trawl, and which parameters will have a significant impact on the effective exploitation of a fishery stock. Whereas the technological analysis aims at improving the efficiency with regard to the effective utilization of fuel and fishery stocks, economic analysis ascertains the present status of the trawling operations from the commercial angle.

Hook selectivity of the pacu Piaractus mesopotamicus (Holmberg, 1887) in the Pantanal, the state of Mato Grosso do Sul, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Trammel net selectivity studies in the Algarve (southern Portugal), gulf of cadiz (Spain), Basque coutry (Spain) and cyclades islands (Greece)

Trammel net fisheries were studied in four areas: the Cantabrian Sea (Basque Country, Spain), the Algarve (Southern Portugal), the Gulf of Cádiz (Spain) and the Cyclades Islands (Greece). Surveys were carried out in order to identify trammel net métiers and to characterise the gear used. Trammel nets were among the most important gears used in the small-scale fisheries, with up to 9 different métiers identified in each area. The most important métiers in the Algarve and the Gulf of Cádiz were those for cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica). In the Cantabrian Sea, sole (Solea vulgaris), shellfish (several species) and scorpion fish (Scorpaena spp.) métiers dominated while a variety of species where targeted in the multi-species trammel net fishery in the Cyclades. In each area, experimental trammel nets of six different types (combinations of 2 large mesh outer panel sizes and 3 small mesh outer panels) corresponding to the most common métier, were constructed and fishing trials carried out on a seasonal basis (4 seasons in the Cantabrian Sea, Algarve and Cyclades and 2 in the Gulf of Cádiz) using chartered commercial fishing vessels. Overall, 271, 360, 185 and 185 km of trammel nets were fished in the experimental fishing trials in the Cantabrian Sea, Algarve, Gulf of Cádiz and Cyclades Islands respectively.

An alternative methodology for fitting selectivity curves to pre-defined distributions

A non-linear least-squares methodology for simultaneously estimating parameters of selectivity curves with a pre-defined functional form, across size classes and mesh sizes, using catch size frequency distributions, was developed based on the model of Kirkwood and Walker [Kirkwood, G.P., Walker, T.L, 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss. 37, 101-106]. Observed catches of fish of size class I in mesh m are modeled as a function of the estimated numbers of fish of that size class in the population and the corresponding selectivities. A comparison was made with the maximum likelihood methodology of [Kirkwood, G.P., Walker, T.I., 1986. Gill net selectivities for gummy shark, Mustelus antarcticus Gunther, taken in south-eastern Australian waters. Aust. J. Mar. Freshw. Res. 37, 689-697] and [Wulff, A., 1986. Mathematical model for selectivity of gill nets. Arch. Fish Wiss; 37, 101-106], using simulated catch data with known selectivity curve parameters, and two published data sets. The estimated parameters and selectivity curves were generally consistent for both methods, with smaller standard errors for parameters estimated by non-linear least-squares. The proposed methodology is a useful and accessible alternative which can be used to model selectivity in situations where the parameters of a pre-defined model can be assumed to be functions of gear size; facilitating statistical evaluation of different models and of goodness of fit. (C) 1998 Elsevier Science B.V.

Size selectivity of trammel nets in southern European small-scale fisheries

Trammel net size selectivity was studied for the most important metiers in four southern European areas: the Cantabrian Sea (Atlantic, Basque Country, Spain), the Algarve (Atlantic, southern Portugal), the Gulf of Cadiz (Atlantic, Spain) and the Cyclades Islands (Mediterranean, Aegean Sea, Greece). These metiers were: cuttlefish (Sepia officinalis) and soles (Solea senegalensis, Microchirus azevia, Synaptura lusitanica) in the Algarve and the Gulf of Cadiz, sole (Solea solea) in the Cantabrian Sea and mixed fin-fish in the Cyclades. In each area, experimental trammel nets of six different types (combinations of two large outer panel mesh sizes and three small inner panel meshes) were constructed. Fishing trials were carried out on a seasonal basis (four seasons in the Cantabrian Sea, Algarve and Cyclades and two seasons in the Gulf of Cadiz) with chartered commercial fishing vessels. Overall, size selectivity was estimated for 17 out of 28 species for which sufficient data were available. Trammel nets generally caught a wide size range of the most important species, with length frequency distributions that were skewed to the right and/or bi-modal. In many cases the length frequency distributions of the different nets were highly overlapped. The Kolmogorov-Smirnov test also showed that the large outer panel meshes generally had no effect in terms of size selectivity, while the opposite was true for the small inner panel ones. Six different selectivity models (normal scale, normal location, gamma, log-normal, bi-modal and gamma semi-Wileman) were fitted to data for the most abundant species in the four areas. For fish, the bi-modal model provided the best fits for the majority of the data sets, with the uni-modal models giving poor fits in most cases. For Sepia officinalis, where trammelling or pocketing was the method of capture in 100% of the cases, the logistic model fitted by maximum likelihood was judged to be more appropriate for describing the size selective properties of the trammel nets. Our results, which are among the first ones on trammel net selectivity in European waters, will be useful for evaluating the impacts of competing gear for the socio-economically important small-scale static gear fisheries. (c) 2006 Elsevier B.V All rights reserved.