Flexible high-power multi DC-DC converters for train systems

This thesis reports on the investigations, simulations and analyses of novel power electronics topologies and control strategies. The research is financed by an Australian Research Council (ARC) Linkage (07-09) grant. Therefore, in addition to developing original research and contributing to the available knowledge of power electronics, it also contributes to the design of a DC-DC converter for specific application to the auxiliary power supply in electric trains. Specifically, in this regard, it contributes to the design of a 7.5 kW DC-DC converter for the industrial partner (Schaffler and Associates Ltd) who supported this project. As the thesis is formatted as a ‘thesis by publication’, the contents are organized around published papers. The research has resulted in eleven papers, including seven peer reviewed and published conference papers, one published journal paper, two journal papers accepted for publication and one submitted journal paper (provisionally accepted subject to few changes). In this research, several novel DC-DC converter topologies are introduced, analysed, and tested. The similarity of all of the topologies devised lies in their ‘current circulating’ switching state, which allows them to store some energy in the inductor, as extra inductor current. The stored energy may be applied to enhance the performance of the converter in the occurrence of load current or input voltage disturbances. In addition, when there is an alternating load current, the ability to store energy allows the converter to perform satisfactorily despite frequently and highly varying load current. In this research, the capability of current storage has been utilised to design topologies for specific applications, and the enhancement of the performance of the considered applications has been illustrated. The simplest DC-DC converter topology, which has a ‘current circulating’ switching state, is the Positive Buck-Boost (PBB) converter (also known as the non-inverting Buck-Boost converter). Usually, the topology of the PBB converter is operating as a Buck or a Boost converter in applications with widely varying input voltage or output reference voltage. For example, in electric railways (the application of our industrial partner), the overhead line voltage alternates from 1000VDC to 500VDC and the required regulated voltage is 600VDC. In the course of this research, our industrial partner (Schaffler and Associates Ltd) industrialized a PBB converter–the ‘Mudo converter’–operating at 7.5 kW. Programming the onboard DSP and testing the PBB converter in experimental and nominal power and voltage was part of this research program. In the earlier stages of this research, the advantages and drawbacks of utilization of the ‘current circulating’ switching state in the positive Buck-Boost converter were investigated. In brief, the advantages were found to be robustness against input voltage and current load disturbances, and the drawback was extra conduction and switching loss. Although the robustness against disturbances is desirable for many applications, the price of energy loss must be minimized to attract attention to the utilization of the PBB converter. In further stages of this research, two novel control strategies for different applications were devised to minimise the extra energy loss while the advantages of the positive Buck-Boost converter were fully utilized. The first strategy is Smart Load Controller (SLC) for applications with pre-knowledge or predictability of input voltage and/or load current disturbances. A convenient example of these applications is electric/hybrid cars where a master controller commands all changes in loads and voltage sources. Therefore, the master controller has a pre-knowledge of the load and input voltage disturbances so it can apply the SLC strategy to utilize robustness of the PBB converter. Another strategy aiming to minimise energy loss and maximise the robustness in the face of disturbance is developed to cover applications with unexpected disturbances. This strategy is named Dynamic Hysteresis Band (DHB), and is used to manipulate the hysteresis band height after occurrence of disturbance to reduce dynamics of the output voltage. When no disturbance has occurred, the PBB converter works with minimum inductor current and minimum energy loss. New topologies based on the PBB converter have been introduced to address input voltage disturbances for different onboard applications. The research shows that the performance of applications of symmetrical/asymmetrical multi-level diode-clamped inverters, DC-networks, and linear-assisted RF amplifiers may be enhanced by the utilization of topologies based on the PBB converter. Multi-level diode-clamped inverters have the problem of DC-link voltage balancing when the power factor of their load closes to unity. This research has shown that this problem may be solved with a suitable multi-output DC-DC converter supplying DClink capacitors. Furthermore, the multi-level diode-clamped inverters supplied with asymmetrical DC-link voltages may improve the quality of load voltage and reduce the level of Electromagnetic Interference (EMI). Mathematical analyses and experiments on supplying symmetrical and asymmetrical multi-level inverters by specifically designed multi-output DC-DC converters have been reported in two journal papers. Another application in which the system performance can be improved by utilization of the ‘current circulating’ switching state is linear-assisted RF amplifiers in communicational receivers. The concept of ‘linear-assisted’ is to divide the signal into two frequency domains: low frequency, which should be amplified by a switching circuit; and the high frequency domain, which should be amplified by a linear amplifier. The objective is to minimize the overall power loss. This research suggests using the current storage capacity of a PBB based converter to increase its bandwidth, and to increase the domain of the switching converter. The PBB converter addresses the industrial demand for a DC-DC converter for the application of auxiliary power supply of a typical electric train. However, after testing the industrial prototype of the PBB converter, there were some voltage and current spikes because of switching. To attenuate this problem without significantly increasing the switching loss, the idea of Active Gate Signalling (AGS) is presented. AGS suggests a smart gate driver that selectively controls the switching process to reduce voltage/current spikes, without unacceptable reduction in the efficiency of switching.

Gene electrotransfer into murine skeletal muscle: A systematic analysis of parameters for long-term gene expression

Skeletal muscle is an attractive target tissue for delivery of therapeutic genes, since it is well vascularized, easily accessible, and has a high capacity for protein synthesis. For efficient transfection in skeletal muscle, several protocols have been described, including delivery of low voltage electric pulses and a combination of high and low voltage electric pulses. The aim of this study was to determine the influence of different parameters of electrotransfection on short-term and long-term transfection efficiency in murine skeletal muscle, and to evaluate histological changes in the treated tissue. Different parameters of electric pulses, different time lags between plasmid DNA injection and application of electric pulses, and different doses of plasmid DNA were tested for electrotransfection of tibialis cranialis muscle of C57BI/6 mice using DNA plasmid encoding green fluorescent protein (GFP). Transfection efficiency was assessed on frozen tissue sections one week after electrotransfection using a fluorescence microscope and also noninvasively, followed by an in vivo imaging system using a fluorescence stereo microscope over a period of several months. Histological changes in muscle were evaluated immediately or several months after electrotransfection by determining infiltration of inflammatory mononuclear cells and presence of necrotic muscle fibers. The most efficient electrotransfection into skeletal muscle of C57BI/6 mice in our experiments was achieved when one high voltage (HV) and four low voltage (LV) electric pulses were applied 5 seconds after the injection of 30 μg of plasmid DNA. This protocol resulted in the highest short-term as well as long-term transfection. The fluorescence intensity of the transfected area declined after 2-3 weeks, but GFP fluorescence was still detectable 18 months after electrotransfection. Extensive inflammatory mononuclear cell infiltration was observed immediately after the electrotransfection procedure using the described parameters, but no necrosis or late tissue damage was observed. This study showed that electric pulse parameters, time lag between the injection of DNA and application of electric pulses, and dose of plasmid DNA affected the duration of transgene expression in murine skeletal muscle. Therefore, transgene expression in muscle can be controlled by appropriate selection of electrotransfection protocol.

Dodecagonal space vector diagram using cascaded H-Bridge inverters

This paper proposes the development of dodecagonal (12-sided) space vector diagrams from cascaded H-Bridge inverters. As already reported in literatures, dodecagonal space vector diagrams have many advantages over conventional hexagonal ones. Some of them include the absence of 6n±1, (n=odd) harmonics from the phase voltage, and the extension of the linear modulation range. In this paper, a new power circuit is proposed for generating multiple dodecagons in the space vector plane. It consists of two cascaded H-Bridge cells fed from asymmetric dc voltage sources. It is shown that, with proper PWM timing calculation and placement of active and zero vectors, a very high quality of sine-wave can be produced. At the same time, the switching frequency of individual cells can be reduced substantially. Detailed PWM analysis, one design example and an elaborate simulation study is presented to support the proposed idea.

A Seven-Level Inverter Topology for Induction Motor Drive Using Two-Level Inverters and Floating Capacitor Fed H-Bridges

A multilevel inverter topology for seven-level space vector generation is proposed in this paper. In this topology, the seven-level structure is realized using two conventional two-level inverters and six capacitor-fed H-bridge cells. It needs only two isolated dc-voltage sources of voltage rating V(dc)/2 where V(dc) is the dc voltage magnitude required by the conventional neutral point clamped (NPC) seven-level topology. The proposed topology is capable of maintaining the H-bridge capacitor voltages at the required level of V(dc)/6 under all operating conditions, covering the entire linear modulation and overmodulation regions, by making use of the switching state redundancies. In the event of any switch failure in H-bridges, this inverter can operate in three-level mode, a feature that enhances the reliability of the drive system. The two-level inverters, which operate at a higher voltage level of V(dc)/2, switch less compared to the H-bridges, which operate at a lower voltage level of V(dc)/6, resulting in switching loss reduction. The experimental verification of the proposed topology is carried out for the entire modulation range, under steady state as well as transient conditions.

A hybrid nine-level inverter for IM drive

This paper proposes a new hybrid nine-level inverter topology for IM drive. The nine-level structure is realized by using two three-phase two-level inverters fed by isolated DC voltage sources and six H-bridges fed by capacitors. The number of switches required in this topology is only 36 where as the conventional nine-level topologies require 48 switches. The voltages across the capacitors, feeding the H-bridges that operate at asymmetric voltages, are effectively balanced by making use of the switching state redundancies. In this topology, the requirement of DC link voltage is only half of the maximum magnitude of the voltage space vector. As the two-level inverters are powered by isolated voltage sources, the circulation of triplen harmonic current in the motor winding is prevented. The proposed drive system is capable of functioning in three-level mode in case of any switch failure in H-bridges. The performance of the proposed topology in the entire modulation range is verified by simulation study and experiment.

Charter and Party Boat Operators in the U.S. Gulf of Mexico: A Social Structure Perspective

To better address the charter and party boat fishery needs in the U.S. Gulf of Mexico, fishery managers must understand the linkages between the industry and other groups and organizations that affect its success. Gulf state charter and party boat operators were interviewed to ascertain the extent of their social network linkages, membership in community organizations, business community relationships, and linkages to information sources. Approximately one-third to one-half of the charter and party boat operators did not belong to local community organizations that could assist their business through tourism promotion or natural resource protection. Despite their limited integration in the community, the vast majority of operators gave and received referrals from other businesses. Of four major information sources, the National Weather Service and the County Marine Extension agents were rated highest and lowest, respectively, in mean importance to charter and party boat operators. Results suggest that business success can be enhanced by strengthening network ties between operators and local businesses, chambers of commerce, and tourism organizations. For this to occur, individual operators and charter/party boat organizations need to become more effective in representing industry interests. Informational linkages between industry and govemment agencies also need improvement.

L'ADN: dans l'enquête et au tribunal - Étude de cas du tueur en série Robert William Pickton

Travail dirigé présenté à la Faculté des Études supérieures en vue de l’obtention du grade de Maîtrise en Criminologie, option Criminalistique et informations

Identifying and quantifying nonconservative energy production/destruction terms in hydrostatic Boussinesq primitive equation models

This paper seeks to illustrate the point that physical inconsistencies between thermodynamics and dynamics usually introduce nonconservative production/destruction terms in the local total energy balance equation in numerical ocean general circulation models (OGCMs). Such terms potentially give rise to undesirable forces and/or diabatic terms in the momentum and thermodynamic equations, respectively, which could explain some of the observed errors in simulated ocean currents and water masses. In this paper, a theoretical framework is developed to provide a practical method to determine such nonconservative terms, which is illustrated in the context of a relatively simple form of the hydrostatic Boussinesq primitive equation used in early versions of OGCMs, for which at least four main potential sources of energy nonconservation are identified; they arise from: (1) the “hanging” kinetic energy dissipation term; (2) assuming potential or conservative temperature to be a conservative quantity; (3) the interaction of the Boussinesq approximation with the parameterizations of turbulent mixing of temperature and salinity; (4) some adiabatic compressibility effects due to the Boussinesq approximation. In practice, OGCMs also possess spurious numerical energy sources and sinks, but they are not explicitly addressed here. Apart from (1), the identified nonconservative energy sources/sinks are not sign definite, allowing for possible widespread cancellation when integrated globally. Locally, however, these terms may be of the same order of magnitude as actual energy conversion terms thought to occur in the oceans. Although the actual impact of these nonconservative energy terms on the overall accuracy and physical realism of the oceans is difficult to ascertain, an important issue is whether they could impact on transient simulations, and on the transition toward different circulation regimes associated with a significant reorganization of the different energy reservoirs. Some possible solutions for improvement are examined. It is thus found that the term (2) can be substantially reduced by at least one order of magnitude by using conservative temperature instead of potential temperature. Using the anelastic approximation, however, which was initially thought as a possible way to greatly improve the accuracy of the energy budget, would only marginally reduce the term (4) with no impact on the terms (1), (2) and (3).

Uso de fosfatos com diferentes relações flúor: fósforo na alimentação de poedeiras semipesadas na fase de produção

Um experimento foi conduzido para verificar os efeitos de diferentes relações flúor:fósforo (F:P) na dieta sobre o desempenho e as concentrações de cálcio, fósforo, magnésio e flúor na tíbia de poedeiras comerciais semipesadas. Foram utilizadas 160 galinhas poedeiras, distribuídas em delineamento inteiramente casualizado, com quatro tratamentos (fontes de fósforo com diferentes relações flúor:fósforo - 1:40; 1:60; 1:80; 1:100) e cinco repetições de oito aves. No final do experimento, foram abatidas duas aves de cada repetição para coleta da tíbia e análise dos teores de flúor, cálcio, fósforo e magnésio. As relações flúor:fósforo não afetaram o consumo de ração, a produção de ovos, a conversão alimentar, o peso dos ovos e a gravidade específica. Entretanto, a porcentagem de casca e a espessura da casca foram menores quando a relação F:P foi de 1:100. Apesar da ausência de efeitos na produção de ovos, verificou-se redução de 7,3; 5,4 e 9,8% na produção entre as aves que receberam ração com a maior relação F:P (1:100) em comparação àquelas alimentadas com as rações com as relações de 1:40; 1:60 e 1:80, respectivamente. A deposição óssea de flúor reduziu e a de magnésio aumentou nas aves alimentadas com a ração contendo as maiores relação de F:P. As fontes de fósforo, nas relações fluor:fósforo de 1:40 a 1:80, podem ser utilizadas em dietas para poedeiras comerciais, pois não afetam o desempenho e a qualidade da casca dos ovos.

Fontes e épocas de aplicação de nitrogênio em feijoeiro de inverno sob sistema plantio direto

O aproveitamento do nitrogênio pelo feijoeiro é dependende da fonte, dose e época de aplicação. Com o objetivo de se avaliar o efeito de fontes e épocas de aplicação de N sobre feijoeiro cultivado em sistema plantio direto, desenvolveu-se o presente trabalho, no município de Selvíria (MS), em 2006 e 2007, com os tratamentos dispostos em delineamento de blocos casualizados, em esquema fatorial 3x6, com quatro repetições. Foram avaliadas fontes de N (ureia, entec e sulfato de amônio) e épocas de aplicação (testemunha - sem N, semeadura, estádio de desenvolvimento V3, estádio de desenvolvimento V4-5, 1/3 semeadura + 2/3 estádio V3 e 1/3 semeadura + 2/3 estádio V4-5). As fontes de N tiveram influência semelhante sobre a produtividade do feijoeiro, afetando apenas o teor de N foliar, em 2006, sendo que a utilização de entec proporcionou concentrações do nutriente, nas folhas, equivalentes às da ureia. A aplicação de todo o N na semeadura afetou a população inicial e final de plantas, em 2006, sendo que o mesmo não foi observado em 2007. As épocas de aplicação não influenciaram na produtividade de grãos da cultura, em ambos os anos de cultivo, porém, em 2006, a adubação nitrogenada incrementou a produtividade em mais de 100%, em média, independentemente da época de aplicação.

Produtividade e valor nutricional de variedades de cana-de-açúcar sob diferentes fontes de fósforo

Due to the expansion of sugarcane in areas that are not traditional in it's cultivation, there is need of study the management of fertilizer, mainly phosphorus, since it's the nutrient that most limits the production in the tropics. The aim of this work was to evaluate the productivity and nutritional value of two varieties of sugarcane grown under different phosphorus sources, for three production cycles in North of Mato Grosso State, Brazil. The experimental design was randomized blocks in factorial scheme 4x2, with four replications. The sources of phosphorus used were bone meal, Arad phosphate and triple superphosphate at a dose of 100 kg P2O5 ha(-1), and a control without nutrient application at planting. The varieties of sugarcane were planted IAC86-2480 and SP79-1011. We evaluated the productivity of dry matter, dry matter content, neutral detergent fiber and acid detergent, lignin, cellulose, in vitro digestibility and crude protein of forage. The phosphorus sources provided higher yields during the first cycle of sugarcane and did not cause significant effect on productivity in subsequent cycles. Phosphorus fertilization did not cause significant changes in the nutritional value of sugarcane. The variety IAC86-2480 showed higher crude protein content in three cycles and higher dry matter yield in the first two cycles, compared to SP79-1011. Regarding the fiber constituents, both showed similar results.

Suplementação de selênio em dietas para a tilápia-do-nilo (Oreochromis niloticus)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Antifungal activity of flavonoids from Heteropterys byrsonimifolia and a commercial source against Aspergillus ochraceus: In silico interactions of these compounds with a protein kinase

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modified routine for decreasing numeric oscillations at associations of lumped elements

Some changes in the application of the numeric trapezoidal integration are analyzed for applications considering pi circuits. It is considered numeric and computational proceedings for improving the numeric results obtained with associations of pi circuits. In numeric integration solutions of the linear systems, it is common to represent these associations of pi circuits by only one matrix. This representation introduces undesirable numeric oscillations in simulations of the dynamics of wave propagation in electrical systems. The proposed changes improve the results of application of cascades of pi circuits associated to the trapezoidal integration, avoiding that the numerical oscillations, or Gibb's oscillations, have high values and are slowly damped. For the carried out simulations, different number of pi circuits and voltage sources are checked, confirming the reduction of the influence of the numeric oscillations on the obtained results. (C) 2014 Elsevier B.V. All rights reserved.

Doses, fontes e épocas de aplicação de nitrogênio em arroz de terras altas cultivado em sistema de semeadura direta

The crop demand by nitrogen varies from one crop to other as well as the amount and application time, and this nutrient can be lost by leaching, volatilization and erosion. The objective of this study was to evaluate doses, sources and times of nitrogen application in rice of high lands cropped in no till system. The work was conducted in Selviria, State of Mato Grosso do Sul, Brazil, in a soil originally under Cerrado vegetation. A randomized blocks design, with the treatments disposed in a factorial scheme 5x3x2 was used. The treatments were constituted by five nitrogen doses (0, 50, 100, 150 and 200 kg ha(-1)), three nitrogen sources (urea; ammonium sulfonitrate plus nitrification inhitor and ammonium sulfate) and two application times (at sowing or at flower bud differentiation), with four repetitions. The sources of nitrogen, as well as the application times had similar effects for most of evaluations. The N doses influenced linearly or with quadratic adjustment the plant height, N leaf content and grains yield, in the two growing seasons. The chlorophyll content and the number of ears m(-2) were affected only, in the first year. The highest yield in the growing season of 2007/08 was obtained with the dose of 149 kg ha(-1) of N. In 2008/09 growing season the increase of N doses provided increment in the grains rice yield, until the maximum dose evaluated (200 kg ha(-1) of N).