Stabilité de l’acide ribonucléique pour la datation des fluides corporels en biologie judiciaire

Projet de recherche réalisé en collaboration avec la section Biologie/ADN du Laboratoire de sciences judiciaires et de médecine légale (LSJML) de Montréal.

Megnin re-analysed: the case of the newborn baby girl, Paris, 1878

This paper analyses acarological evidence from a 130-year-old forensic investigation. It was the first case in forensic acarology, i.e., the first case where mites provided substantial information to estimate the post-mortem interval (PMI). In 1878, the mites found in the mummified body of a newborn baby girl in Paris, France, were studied by acarologist and forensic entomologist Jean Pierre M,gnin. M,gnin estimated around 2.4 million mites in the skull and identified them as Tyroglyphus longior (Gervais), a junior synonym of Tyrophagus longior. He suggested that the arrival of these mites at the corpse would have occurred by phoresy on carrier insects, roughly 5 months before the autopsy. There is no doubt about the identification of the mites, M,gnin was a highly respected acarologist. However, two main factors affecting the biology of Tyrophagus mites were not included in the original analysis. First, M,gnin stated that the mites were phoretic. However, he probably did not have access to information about the natural history of the species, because as a rule Tyrophagus mites are non-phoretic. Considering the omnipresence of Tyrophagus mites in soil, most likely the mites will have arrived almost immediately after death. Second, temperature was not taken into account during the estimations of the mite population growth rate. The new analysis is based on current knowledge of Tyrophagus biology and includes temperature, estimated following a handful of weather reports of the years 1877 and 1878. The new projections indicate that non-phoretic mites may have colonised the body just after death and the colony would have built up over 8 months, contrary to the 5 months proposed by M,gnin. This new lapse of time agrees with the PMI proposed by Brouardel: on 15 January 1878 he postulated the death of the newborn to have occurred some 8 months before the autopsy.

Forensisk undersökning av Solid State Drive

Solid State Diskar (SSD) är relativt nya och mycket om dem är okänt. Detta examensarbete fokuserar på att läsa forensiskt viktig information från både lagringsutrymmet och reservutrymmet. Detta har försökts genom att ett program har byggts i C++, detta program använder ATA kommandon för att läsa information från disken. Även om programmet aldrig blev färdigt kunde det skicka och ta emot data från en SSD, dock inte reservutrymmet vilket var fokus i detta examensarbete.

Forensisk undersökning av Amazon Kindle

Detta arbete har genomförts i samarbete med Försvarsmakten och behandlar vilka möjligheter som finns för forensiska undersökningar av e-boksläsaren Amazon Kindle. I arbetets litteraturstudie beskrivs hur tidigare forskning inom ämnet är kraftigt begränsad. Arbetet syftar därför till att besvara hur data kan extraheras från en Kindle, vilka data av forensiskt intresse en Kindle kan innehålla, var denna information lagras och om detta skiljer sig åt mellan olika modeller och firmware-versioner samt om det är nog att undersöka endast den del av minnet som är tillgänglig för användaren eller om ytterligare privilegier för att komma åt hela minnesarean bör införskaffas. För att göra detta fylls tre olika modeller av Kindles med information. Därefter tas avbilder på dem, dels på endast användarpartitionen och dels på dess fullständiga minnesarea efter att en privilegie-eskalering har utförts. Inhämtad data analyseras och resultatet presenteras. Resultatet visar att information av forensiskt intresse så som anteckningar, besökta webbsidor och dokument kan återfinnas, varför det finns ett värde i att utföra forensiska undersökningar på Amazon Kindles. Skillnader råder mellan vilken information som kan återfinnas och var den lagras på de olika enheterna. Enheterna har fyra partitioner varav endast en kan kommas åt utan privilegie-eskalering, varför det finns en fördel med att inhämta avbilder av hela minnesarean. Utöver ovanstående presenteras en metod för att förbipassera en enhets kodlås och därigenom få fullständig åtkomst till den även om den är låst.

Tests of one Brazilian facial reconstruction method using three soft tissue depth sets and familiar assessors

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Investigação geofísica ambiental e forense nos cemitérios do Benguí e do Tapanã (Belém - PA)

A Geofísica é uma ferramenta útil no estudo da contaminação de água provocada por cemitérios, assim como na investigação criminalística. A contaminação provocada por cemitérios é um tema ainda pouco estudado. Por outro lado, Geofísica forense é quase desconhecida no Brasil. Para estudar esses dois temas – cemitérios e alvos forenses – foram eleitos dois cemitérios públicos: o cemitério do Bengui, já desativado, e o cemitério do Tapanã. A investigação geofísica nos dois Cemitérios foi realizada por meio dos métodos eletromagnéticos ground penetrating radar (GPR) e Slingram de baixo número de indução (low induction number – LIN). No Cemitério do Bengui, testou-se o GPR na detecção do nível hidrostático, visto que, na implantação de um Cemitério, a informação mais importante é a profundidade do aquífero. No Cemitério do Tapanã, onde foi implantado o Campo de Testes controlados para Geofísica Forense, Ambiental e de Resgate, denominado FORAMB, utilizou-se GPR e Slingram em levantamentos mensais a fim de detectar o nível hidrostático, monitorar o desenvolvimento da contaminação e, especialmente, encontrar alvos forenses (um cadáver, uma caixa simulando um túnel e uma caixa com ferros simulando armas). O GPR mostrou-se eficaz em todos os estudos, especialmente na delineação dos alvos forenses. O Slingram não forneceu informações úteis.

Tests of one Brazilian facial reconstruction method using three soft tissue depth sets and familiar assessors

Facial reconstruction is a method that seeks to recreate a person's facial appearance from his/her skull. This technique can be the last resource used in a forensic investigation, when identification techniques such as DNA analysis, dental records, fingerprints and radiographic comparison cannot be used to identify a body or skeletal remains. To perform facial reconstruction, the data of facial soft tissue thickness are necessary. Scientific literature has described differences in the thickness of facial soft tissue between ethnic groups. There are different databases of soft tissue thickness published in the scientific literature. There are no literature records of facial reconstruction works carried out with data of soft tissues obtained from samples of Brazilian subjects. There are also no reports of digital forensic facial reconstruction performed in Brazil. There are two databases of soft tissue thickness published for the Brazilian population: one obtained from measurements performed in fresh cadavers (fresh cadavers' pattern), and another from measurements using magnetic resonance imaging (Magnetic Resonance pattern). This study aims to perform three different characterized digital forensic facial reconstructions (with hair, eyelashes and eyebrows) of a Brazilian subject (based on an international pattern and two Brazilian patterns for soft facial tissue thickness), and evaluate the digital forensic facial reconstructions comparing them to photos of the individual and other nine subjects. The DICOM data of the Computed Tomography (CT) donated by a volunteer were converted into stereolitography (STL) files and used for the creation of the digital facial reconstructions. Once the three reconstructions were performed, they were compared to photographs of the subject who had the face reconstructed and nine other subjects. Thirty examiners participated in this recognition process. The target subject was recognized by 26.67% of the examiners in the reconstruction performed with the Brazilian Magnetic Resonance Pattern, 23.33% in the reconstruction performed with the Brazilian Fresh Cadavers Pattern and 20.00% in the reconstruction performed with the International Pattern, in which the target-subject was the most recognized subject in the first two patterns. The rate of correct recognitions of the target subject indicate that the digital forensic facial reconstruction, conducted with parameters used in this study, may be a useful tool. (C) 2011 Elsevier Ireland Ltd. All rights reserved.

Caratteristiche innovative nell'acquisizione di dati di informatica forense in ambienti virtuali

Come risposta positiva alle richieste provenienti dal mondo dei giuristi, spesso troppo distante da quello scientifico, si vuole sviluppare un sistema solido dal punto di vista tecnico e chiaro dal punto di vista giurico finalizzato ad migliore ricerca della verità. L’obiettivo ci si prefigge è quello di creare uno strumento versatile e di facile utilizzo da mettere a disposizione dell’A.G. ed eventualmente della P.G. operante finalizzato a consentire il proseguo dell’attività d’indagine in tempi molto rapidi e con un notevole contenimento dei costi di giustizia rispetto ad una normale CTU. La progetto verterà su analisi informatiche forensi di supporti digitali inerenti vari tipi di procedimento per cui si dovrebbe richiedere una CTU o una perizia. La sperimentazione scientifica prevede un sistema di partecipazione diretta della P.G. e della A.G. all’analisi informatica rendendo disponibile, sottoforma di macchina virtuale, il contenuto dei supporti sequestrati in modo che possa essere visionato alla pari del supporto originale. In questo modo il CT diventa una mera guida per la PG e l’AG nell’ambito dell’indagine informatica forense che accompagna il giudice e le parti alla migliore comprensione delle informazioni richieste dal quesito. Le fasi chiave della sperimentazione sono: • la ripetibilità delle operazioni svolte • dettare delle chiare linee guida per la catena di custodia dalla presa in carico dei supporti • i metodi di conservazione e trasmissione dei dati tali da poter garantire integrità e riservatezza degli stessi • tempi e costi ridotti rispetto alle normali CTU/perizie • visualizzazione diretta dei contenuti dei supporti analizzati delle Parti e del Giudice circoscritte alle informazioni utili ai fini di giustizia

The examination and identification of bite marks in foods using 3D scanning and 3D comparison methods

Bite mark analysis offers the opportunity to identify the biter based on the individual characteristics of the dentitions. Normally, the main focus is on analysing bite mark injuries on human bodies, but also, bite marks in food may play an important role in the forensic investigation of a crime. This study presents a comparison of simulated bite marks in different kinds of food with the dentitions of the presumed biter. Bite marks were produced by six adults in slices of buttered bread, apples, different kinds of Swiss chocolate and Swiss cheese. The time-lapse influence of the bite mark in food, under room temperature conditions, was also examined. For the documentation of the bite marks and the dentitions of the biters, 3D optical surface scanning technology was used. The comparison was performed using two different software packages: the ATOS modelling and analysing software and the 3D studio max animation software. The ATOS software enables an automatic computation of the deviation between the two meshes. In the present study, the bite marks and the dentitions were compared, as well as the meshes of each bite mark which were recorded in the different stages of time lapse. In the 3D studio max software, the act of biting was animated to compare the dentitions with the bite mark. The examined food recorded the individual characteristics of the dentitions very well. In all cases, the biter could be identified, and the dentitions of the other presumed biters could be excluded. The influence of the time lapse on the food depends on the kind of food and is shown on the diagrams. However, the identification of the biter could still be performed after a period of time, based on the recorded individual characteristics of the dentitions.

Death by biscuit--exhumation, post-mortem CT, and revision of the cause of death one year after interment

We describe a case of exhumation, performed to investigate the circumstances and cause of death, one year after burial. Post mortem computed tomography (PMCT) revealed a mass in the pharynx. Imaging directed the subsequent forensic autopsy to careful retrieval of a foreign body. Histological analysis revealed a non-cellular composition. The detection of foreign material in the pharynx and its composition indicated accidental, rather than natural death, secondary to choking on food. This unusual case illustrates how post mortem imaging can significantly contribute to forensic investigation and stresses the importance of interdisciplinary collaboration between forensic pathologists and radiologists.

Environmental analysis of polar herbicides in complex organic-rich matrices by high performance liquid chromatography atmospheric pressure ionization mass spectrometry (HPLC-API-MS)

A comprehensive forensic investigation of sensitive ecosystems in the Everglades Area is presented. Assessing the background levels of contamination in these ecosystems represents a vital resource to build up forensic evidence required to enforce future environmental crimes within the studied areas. This investigation presents the development and validation of a fractionation and isolation method for two families of herbicides commonly applied in the vicinity of the study area, including phenoxy acids like 2,4-D, MCPA, and silvex; as well as the most common triazine-based herbicides like atrazine, prometyne, simazine and related metabolites like DIA and DEA. Accelerated solvent extraction (ASE) and solid phase extraction (SPE) were used to isolate the analytes from abiotic matrices containing large amounts of organic material. Atmospheric-pressure ionization (API) with electrospray ionization in negative mode (ESP-), and Chemical Ionization in the positive mode (APCI+) were used to perform the characterization of the herbicides of interest.

A importância do DNA na Medicina Dentária Forense

Com o presente trabalho pretende-se discutir a importância do DNA na resolução de casos de investigação forense. O Homem, desde os tempos mais remotos tem revelado interesse na confirmação da identidade dos seus semelhantes, pelo desenvolvimento e prática de diversas técnicas de identificação. A partir de uma revisão da literatura, fez-se o estudo dos métodos de identificação humana, sendo este mais aprofundado no que diz respeito ao DNA. Frequentemente são encontrados corpos em que a única peça disponível para o processo de identificação é o dente. As peças dentárias são as estruturas mais resistentes e estáveis do corpo humano, mantendo as suas características e propriedades por longos períodos de tempo pós-morte. A análise do DNA contribui de forma muito importante para os processos de reconhecimento humano, principalmente em casos em que outros métodos de identificação falham devido a decomposição, fragmentação, incineração ou inexistência de dados comparativos ante-morte. Para a obtenção de um perfil genético é necessário executar as seguintes etapas: extração do DNA, sua quantificação e amplificação seguida de análise de determinadas regiões do genoma. Nos dias de hoje, muitos casos de identificação necessitam de uma abordagem multidisciplinar, isto porque em algumas situações existe falta de material padrão ou, por outro lado, pode haver mais do que uma evidência a ser examinada.

A Comparison of Geo-tagging in Mobile Internet Browsing Applications on iOS and Android.

Nowadays there is almost no crime committed without a trace of digital evidence, and since the advanced functionality of mobile devices today can be exploited to assist in crime, the need for mobile forensics is imperative. Many of the mobile applications available today, including internet browsers, will request the user’s permission to access their current location when in use. This geolocation data is subsequently stored and managed by that application's underlying database files. If recovered from a device during a forensic investigation, such GPS evidence and track points could hold major evidentiary value for a case. The aim of this paper is to examine and compare to what extent geolocation data is available from the iOS and Android operating systems. We focus particularly on geolocation data recovered from internet browsing applications, comparing the native Safari and Browser apps with Google Chrome, downloaded on to both platforms. All browsers were used over a period of several days at various locations to generate comparable test data for analysis. Results show considerable differences not only in the storage locations and formats, but also in the amount of geolocation data stored by different browsers and on different operating systems.

Digital Forensics AI: on Practicality, Optimality, and Interpretability of Digital Evidence Mining Techniques

Digital forensics as a field has progressed alongside technological advancements over the years, just as digital devices have gotten more robust and sophisticated. However, criminals and attackers have devised means for exploiting the vulnerabilities or sophistication of these devices to carry out malicious activities in unprecedented ways. Their belief is that electronic crimes can be committed without identities being revealed or trails being established. Several applications of artificial intelligence (AI) have demonstrated interesting and promising solutions to seemingly intractable societal challenges. This thesis aims to advance the concept of applying AI techniques in digital forensic investigation. Our approach involves experimenting with a complex case scenario in which suspects corresponded by e-mail and deleted, suspiciously, certain communications, presumably to conceal evidence. The purpose is to demonstrate the efficacy of Artificial Neural Networks (ANN) in learning and detecting communication patterns over time, and then predicting the possibility of missing communication(s) along with potential topics of discussion. To do this, we developed a novel approach and included other existing models. The accuracy of our results is evaluated, and their performance on previously unseen data is measured. Second, we proposed conceptualizing the term “Digital Forensics AI” (DFAI) to formalize the application of AI in digital forensics. The objective is to highlight the instruments that facilitate the best evidential outcomes and presentation mechanisms that are adaptable to the probabilistic output of AI models. Finally, we enhanced our notion in support of the application of AI in digital forensics by recommending methodologies and approaches for bridging trust gaps through the development of interpretable models that facilitate the admissibility of digital evidence in legal proceedings.

Investigation of Postmortem Gases: A Forensic Imaging and Analytical Chemistry Approach

Background: Distinguishing postmortem gas accumulations in the body due to natural decomposition and other phenomena such as gas embolism can prove a difficult task using purely Multi-Detector Computed Tomography (MDCT). The Radiological Alteration Index (RAI) was created with the intention to be able to identify bodies undergoing the putrefaction process based on the quantity of gas detected within the body. The flaw in this approach is the inability to absolutely determine putrefaction as the origin of gas volumes in cases of moderate alteration. The aim of the current study is to identify percentage compositions of O2, N2, CO2 and the presence of gases such as H2 and H2S within these sampling sites in order to resolve this complication. Materials and methods: All cases investigated in our University Center of Legal Medicine are undergoing a Post-Mortem Computed Tomography (PMCT)-scan before external examination or autopsy as a routine investigation. In the obtained images, areas of gas were characterized as 0, I, II or III based on the amount of gas present according to the RAI (1). The criteria for these characterizations were dependent of the site of gas, for example thoracic and abdominal cavities were graded as I (1 - 3cm gas), II (3 - 5cm gas) and III (>5cm gas). Cases showing gaseous sites with grade II or III were selected for this study. The sampling was performed under CT-guidance to target the regions to be punctured. Luer-lock PTFE syringes equipped with a three-way valve and needles were used to sample the gas directly (2). Gaseous samples were then analysed using gas chromatography coupled to a thermal conductivity detector (GC-TCD). The components present in the samples were expressed as a percentage of the overall gas present. Results: Up to now, we have investigated more than 40 cases using our standardized procedure for sampling and analysis of gas. O2, N2 and CO2 were present in most samples. The following distributions were found to correlate to gas origins of gas embolism/scuba diving accidents, trauma and putrefaction: ? Putrefaction → O2 = 1 - 5%; CO2 > 15%; N2 = 10 - 70%; H2 / H2S / CH4 variable presence ? Gas embolism/Scuba diving accidents → O2 and N2= varying percentages; CO2 > 20% ? Trauma → O2 = small percentage; CO2 < 15%; N2 > 65% H2 and H2S indicated levels of putrefaction along with methane which can also gauge environmental conditions or conditions of body storage/burial. Many cases showing large RAI values (advanced alteration) did reveal a radiological diagnosis which was in concordance with the interpretation of the gas composition. However, in certain cases (gas embolism, scuba divers) radiological interpretation was not possible and only chemical gas analysis was found to lead to the correct diagnosis, meaning that it provided complementary information to the radiological diagnosis. Conclusion: Investigation of postmortem gases is a useful tool to determine origin of gas generation which can aid the diagnosis of the cause of death. Levels of gas can provide information on stage of putrefaction and help to perform essential medico-legal diagnosis such as vital gas embolism.