See you in class: Promoting a quality program for pre-service educators in regional locations through a virtual classroom

The quality of an online university degree is paramount to the student, the reputation of the university and most importantly, the profession that will be entered. At the School of Education within Curtin University, we aim to ensure that students within rural and remote areas are provided with high quality degrees equal to their city counterparts who access face-to-face classes on campus.In 2010, the School of Education moved to flexible delivery of a fully online Bachelor of Education degree for their rural students. In previous years, the degree had been delivered in physical locations around the state. Although this served the purpose for the time, it restricted the degree to only those rural students who were able to access the physical campus. The new model in 2010 allows access for students in any rural area who have a computer and an internet connection, regardless of their geographical location. As a result enrolments have seen a positive increase in new students. Academic staff had previously used an asynchronous environment to deliver learning modules housed within a learning management system (LMS). To enhance the learning environment and to provide high quality learning experiences to students learning at a distance, the adoption of synchronous software was introduced. This software is a real-time virtual classroom environment that allows for communication through Voice over Internet Protocol (VoIP) and videoconferencing, along with a large number of collaboration tools to engage learners. This research paper reports on the professional development of academic staff to integrate a live e-learning solution into their current LMS environment. It involved professional development, including technical orientation for teaching staff and course participants simultaneously. Further, pedagogical innovations were offered to engage the students in a collaborative learning environment. Data were collected from academic staff through semi-structured interviews and participant observation. The findings discuss the perceived value of the technology, problems encountered and solutions sought.

Implementing virtual collaborative inquiry practises in a middle-school context

The aim of the present study was to investigate the challenges that relate to the implementation of virtual inquiry practises in middle school. The case was a school course in which a group of Finnish students (N = 14) and teachers (N = 7) completed group inquiries through virtual collaboration, using a web-based learning environment. The task was to accomplish a cross-disciplinary inquiry into cultural issues. The students worked mainly at home and took much responsibility for their course achievements. The investigators analysed the pedagogical design of the course and the content of the participants' interaction patterns in the web-based environment, using qualitative content analysis and social network analysis. The findings suggest that the students succeeded in producing distinctive cultural products, and both the students and the teachers adopted novel roles during the inquiry. The web-based learning environment was used more as a coordination tool for organizing the collaborative work than as a forum for epistemic inquiry. The tension between the school curriculum and the inquiry practises was manifest in the participants' discussions of the assessment criteria of the course.

Pose-Invariant Face Recognition Using Real and Virtual Views

The problem of automatic face recognition is to visually identify a person in an input image. This task is performed by matching the input face against the faces of known people in a database of faces. Most existing work in face recognition has limited the scope of the problem, however, by dealing primarily with frontal views, neutral expressions, and fixed lighting conditions. To help generalize existing face recognition systems, we look at the problem of recognizing faces under a range of viewpoints. In particular, we consider two cases of this problem: (i) many example views are available of each person, and (ii) only one view is available per person, perhaps a driver's license or passport photograph. Ideally, we would like to address these two cases using a simple view-based approach, where a person is represented in the database by using a number of views on the viewing sphere. While the view-based approach is consistent with case (i), for case (ii) we need to augment the single real view of each person with synthetic views from other viewpoints, views we call 'virtual views'. Virtual views are generated using prior knowledge of face rotation, knowledge that is 'learned' from images of prototype faces. This prior knowledge is used to effectively rotate in depth the single real view available of each person. In this thesis, I present the view-based face recognizer, techniques for synthesizing virtual views, and experimental results using real and virtual views in the recognizer.

The Meaning of the Virtual YMCA After School Program for Former Participants: An Exploratory Study

Research has shown that after school programs can provide children with opportunities that help foster positive development and adaptation. Current research meets the need for identifying short term outcomes, program standards, and short term evaluation techniques, however less understood is the lasting meaning of participation for previous participants after their participation. The purpose of this study was to explore the meaning and perceived impacts of participation in a preventative, skill-building after school program for former participants. Using an exploratory case study approach, interviews were conducted with six previous participants of the Virtual YMCA and a former school principal. Reconstructed narratives and analyzed transcripts show that participants do still derive meaning and significance from their participation in the program, although highly individualized. Significant aspects of the program are identified, as well as the participant’s perceived impacts which are still present today. Discussion for practitioners, researchers, and funders is provided.

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.

School mathematics and ICT: are we doing enough? - The talk

The author discusses how to improve the use of ICT in mathematics education. A number of measures are recommended including the need to conduct an ICT-and-mathematics audit across the curriculum. The author points out that ICT is changing traditional understandings of literacy and numeracy and how it is taught. ICT approaches may help to teach things in slightly different ways, but will not necessarily do this any better than old ways. The author highlights that teaching is changing from face-to-face oral discussion to virtual talk, with ICT just the latest technology in a long line of technological innovations that have transformed teaching since the nineteenth century.

Process drama and digital games as text and action in virtual worlds : developing new literacies in school

This article explores the intersections between drama and digital gaming and the educational possibilities for literacy of both. The article draws on a model for the educational uses of digital gaming and three case studies from the Australian Research Council funded three and a half year project, Literacy in the digital world of the twenty first century: Learning from computer games. This model theorises the scope of the possibilities for literacy outcomes from the usage of computer games. The article describes how the model works, and then applies the model to drama education, specifying some new ways of thinking about the literacy outcomes from drama education. Process drama is theorised as the creation of text-in-action.

Face Lift Surgery for Reconstructed Virtual Humans

We introduce an innovative, semi-automatic method to transform low resolution facial meshes into high definition ones, based on the tailoring of a generic, neutral human head model, designed by an artist, to fit the facial features of a specific person. To determine these facial features we need to select a set of "control points" (corners of eyes, lips, etc.) in at least two photographs of the subject's face. The neutral head mesh is then automatically reshaped according to the relation between the control points in the original subject's mesh through a set of transformation pyramids. The last step consists in merging both meshes and filling the gaps that appear in the previous process. This algorithm avoids the use of expensive and complicated technologies to obtain depth maps, which also need to be meshed later.

Exploring the effectiveness of virtual product placement on recall and recognition of new brands

This paper investigates the effectiveness of virtual product placement as a marketing tool by examining the relationship between brand recall and recognition and virtual product placement. It also aims to address a gap in the existing academic literature by focusing on the impact of product placement on recall and recognition of new brands. The growing importance of product placement is discussed and a review of previous research on product placement and virtual product placement is provided. The research methodology used to study the recall and recognition effects of virtual product placement are described and key findings presented. Finally, implications are discussed and recommendations for future research provided.

From emotional suppression to regulated empathy : the changing face of control in the CES

Between the 1970s and the 1990s the level and type of emotionality in the Commonwealth Employment Service (the Australian national employment service) altered. Within a context of changing economic conditions and concomitant work intensification, it is argued that untenable working conditions resulted in new recruits adopting a coping strategy that led to the use rather than the suppression of emotions. The use of emotions provided workers with job satisfaction and greater control over service interactions. Management subsequently commandeered the use of emotions to complement the introduction of private sector management techniques and service delivery reforms, regaining control over worker-client interactions.