Influence of elastic anisotropy on structural nanoscale textures

We study the influence of elastic anisotropy on nanoscale precursor textures that exist in some shape-memory alloys and show that tweed occurs in the limit of high elastic anisotropy while a nanocluster phase-separated state occurs for values of anisotropy inhibiting the formation of martensite. These results are consistent with specific heat data, elastic constant measurements, and zero-field cooling or field cooling experiments in nonstoichiometric NiTi alloys.

Génération et édition de textures géométriques représentées par des ensembles de points

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Classification of textures seen from different distances and under varying illumination direction

Changes in the angle of illumination incident upon a 3D surface texture can significantly alter its appearance, implying variations in the image texture. These texture variations produce displacements of class members in the feature space, increasing the failure rates of texture classifiers. To avoid this problem, a model-based texture recognition system which classifies textures seen from different distances and under different illumination directions is presented in this paper. The system works on the basis of a surface model obtained by means of 4-source colour photometric stereo, used to generate 2D image textures under different illumination directions. The recognition system combines coocurrence matrices for feature extraction with a Nearest Neighbour classifier. Moreover, the recognition allows one to guess the approximate direction of the illumination used to capture the test image

Geologia, geoquímica e petrologia magnética do magmatismo básico da área de Nova Canadá (PA), Província Carajás

O mapeamento geológico realizado na área de Nova Canadá, porção sul do Domínio Carajás, Província Carajás, possibilitou a individualização de duas unidades de caráter máfico e intrusivas nos granitoides do Complexo Xingu e, mais restritamente, na sequência greenstone belt do Grupo Sapucaia. São representadas por diques de diabásio isotrópicos e por extensos corpos de anfibolito, com os últimos descrevendo texturas nematoblástica e granoblástica, de ocorrência restrita à porção SW da área. Ambos apresentam assinatura de basaltos subalcalinos de afinidade toleítica, sendo que os diques de diabásio são constituídos por três variedades petrográficas: hornblenda gabronorito, gabronorito e norito, sendo essas diferenças restritas apenas quanto à proporção modal de anfibólio, orto- e clinopiroxênio, já que texturalmente, as mesmas não apresentam diferenças significativas. São formados por plagioclásio, piroxênio (orto- e clinopiroxênio), anfibólio, minerais óxidos de Fe-Ti e olivina, apresentam um padrão ETR moderadamente fracionado, discreta anomalia negativa de Eu, ambiente geotectônico correspondente a intraplaca continental, e assinaturas dos tipos OIB e E-MORB. Já os anfibolitos são constituídos por plagioclásio, anfibólio, minerais opacos, titanita e biotita, mostram um padrão ETR horizontalizado, com anomalia de Eu ausente, sendo classificados como toleítos de arco de ilha e com assinatura semelhante aos N-MORB. Os dados de química mineral obtidos nessas unidades mostram que, nos diques de diabásio, o plagioclásio não apresenta variações composicionais significativas entre núcleo e borda, sendo classificados como labradorita, com raras andesina e bytownita; o anfibólio mostra uma gradação composicional de Fe-hornblenda para actinolita, com o aumento de sílica. Nos anfibolitos, o plagioclásio mostra uma grande variação composicional, de oligoclásio à bytownita nas rochas foliadas, sendo que nas menos deformadas, sua classificação é restrita à andesina sódica. O piroxênio, presente apenas nos diabásios, exibe considerável variação em sua composição, revelando um aumento no teor de magnésio nos núcleos, e de ferro e cálcio, nas bordas, permitindo classificá-los em augita, pigeonita (clinopiroxênio) e enstatita (ortopiroxênio). Os diabásios apresentam titanomagnetita, magnetita e ilmenita como os principais óxidos de Fe-Ti, permitindo reconhecer cinco formas distintas de ilmenita nessas rochas: ilmenita treliça, ilmenita sanduíche, ilmenita composta interna/externa, ilmenita em manchas e ilmenita individual. Feições texturais e composicionais sugerem que a titanomagnetita e os cristais de ilmenita composta externa e individual foram originados durante o estágio precoce de cristalização. Durante o estágio subsolidus, a titanomagnetita foi afetada pelo processo de oxi-exsolução, dando origem a intercrescimentos de magnetita pobre em titânio com ilmenita (ilmenitas treliça, em mancha, sanduíche e composta interna). Os anfibolitos possuem a ilmenita como único mineral óxido de Fe e Ti ocorrendo, portanto, sob a forma de ilmenita individual, onde encontra-se sempre associada ao anfibólio e à titanita. Os valores mais elevados de suscetibilidade magnética (SM) estão relacionados aos gabronoritos e noritos, os quais exibem maiores conteúdos modais de minerais opacos e apresentam titanomagnetita magmática em sua paragênese. A variedade hornblenda gabronorito define as amostras com valores intermediários de SM. Os menores valores de SM são atribuídos aos anfibolitos, que são desprovidos de magnetita. A correlação negativa entre valores de SM com os conteúdos modais de minerais ferromagnesianos indica que os minerais paramagnéticos (anfibólio e piroxênio) não possuem influência significativa no comportamento magnético dos diabásios, enquanto nos anfibolitos a tendência de correlação positiva entre estas variáveis pode sugerir que estas fases são as principais responsáveis pelos seus valores de SM. Dados geotermobarométricos obtidos a partir do par titanomagnetita-ilmenita nos diabásios indicam que estes se formaram em condições de temperatura (1112°C) e Fo₂ (-8,85) próximas daquelas do tampão NNO.

Interactive quadrangulation with reeb atlases and connectivity textures

Creating high-quality quad meshes from triangulated surfaces is a highly nontrivial task that necessitates consideration of various application specific metrics of quality. In our work, we follow the premise that automatic reconstruction techniques may not generate outputs meeting all the subjective quality expectations of the user. Instead, we put the user at the center of the process by providing a flexible, interactive approach to quadrangulation design. By combining scalar field topology and combinatorial connectivity techniques, we present a new framework, following a coarse to fine design philosophy, which allows for explicit control of the subjective quality criteria on the output quad mesh, at interactive rates. Our quadrangulation framework uses the new notion of Reeb atlas editing, to define with a small amount of interactions a coarse quadrangulation of the model, capturing the main features of the shape, with user prescribed extraordinary vertices and alignment. Fine grain tuning is easily achieved with the notion of connectivity texturing, which allows for additional extraordinary vertices specification and explicit feature alignment, to capture the high-frequency geometries. Experiments demonstrate the interactivity and flexibility of our approach, as well as its ability to generate quad meshes of arbitrary resolution with high-quality statistics, while meeting the user's own subjective requirements.

High-temperature induced dehydration, phase transition and exsolution in amicite: A single-crystal X-ray study

Temperature dependent single-crystal X-ray data were collected on amicite K4Na4(Al8Si8O32)·11H2O from Kola Peninsula (Russia) in steps of 25 °C from room temperature to 175 °C and of 50 °C up to 425 °C. At room temperature amicite has space group I2 with a = 10.2112(1), b = 10.4154(1), c = 9.8802(1) Å, β = 88.458(1)°, V = 1050.416(18) Å3. Its crystal structure is based on a Si–Al ordered tetrahedral framework of the GIS type with two systems of eight-membered channels running along the a and c axes. Extraframework K and Na cations are ordered at two fully occupied sites. Above 75 °C amicite was found to partly dehydrate into two separate but coherently intergrown phases, both of space group I2/a, one K-rich ∼K8(Al8Si8O32) ·4H2O (at 75 °C: a = 10.038(2), b = 9.6805(19), c = 9.843(2) Å, β = 89.93(3)°, V = 956.5(3) Å3) and the other Na-rich ∼Na8(Al8Si8O32)·2H2O (at 75 °C: a = 9.759(2), b = 8.9078(18), c = 9.5270(19) Å, β = 89.98(3)°, V = 828.2(3) Å3). Upon further heating above 75 °C the Na- and K-phases lost remaining H2O with only minor influence on the framework structure and became anhydrous at 175 °C and 375 °C, respectively. The two anhydrous phases persisted up to 425 °C. Backscattered electron images of a heated crystal displayed lamellar intergrowth of the K- and Na-rich phases. Exposed to ambient humid conditions K- and Na-rich phases rehydrated and conjoined to the original one phase I2 structure.

A systematic evaluation of the Zr-in-rutile thermometer in ultra-high temperature (UHT) rocks

The Zr-in-rutile geothermometer is potentially a widely applicable tool to estimate peak metamorphic temperatures in rocks from diverse geological settings. In order to evaluate its usefulness and reliability to record and preserve high temperatures in granulite facies rocks, rutile from UHT rocks was investigated to assess different mechanisms of Zr (re-)distribution following cooling from high temperature. Granulite facies paragneisses from the lowermost part of the Ivrea Zone, Italy, incorporated as thin sheets into the extensive basaltic body of the Mafic Complex were selected for this study. The results show that Zr-in-rutile thermometry, if properly applied, is well suited to identify and study UHT terranes as it preserves a record of temperatures up to 1190 °C, although the thermometer is susceptible to partial post-peak metamorphic resetting by Zr diffusion. Texturally homogeneous rutile grains preserve Zr concentrations corresponding to temperatures of prograde rutile growth. Diverse rutile textures and relationships between some rutile host grains and included or adjacent Zr-bearing phases bear testimony to varying mechanisms of partial redistribution and resetting of Zr in rutile during cooling and link Zr-in-rutile temperatures to different steps of the metamorphic evolution. Rutile grains that equilibrated their Zr concentrations at temperatures above 1070 °C (i.e. 1.1 wt% Zr) could not retain all Zr in the rutile structure during cooling and exsolved baddeleyite (ZrO2). By subsequent reaction of baddeleyite exsolution lamellae with SiO2, zircon needles formed before the system finally closed at 650–700 °C without significant net loss of Zr from the whole host rutile grain. By reintegration of zircon exsolution needles, peak metamorphic temperatures of up to 1190 °C are derived for the studied rocks, which demonstrates the suitability of this solution thermometer to record UHT conditions and also confirms the extraordinary geological setting of the lowermost part of the Ivrea Zone.

Geochemical composition and crystallization temperatures of ODP Hole 176-735B gabbroic rocks

The transition from magmatic crystallization to high-temperature metamorphism in deep magma chambers (or lenses) beneath spreading ridges has not been fully described. High-temperature microscopic veins found in olivine gabbros, recovered from Ocean Drilling Program Hole 735B on the Southwest Indian Ridge during Leg 176, yield information on the magmatic-hydrothermal transition beneath spreading ridges. The microscopic veins are composed of high-temperature minerals, (i.e., clinopyroxene, orthopyroxene, brown amphibole, and plagioclase). An important feature of these veins is the 'along-vein variation' in mineralogy, which is correlated with the magmatic minerals that they penetrate. Within grains of magmatic plagioclase, the veins are composed of less calcic plagioclase. In grains of olivine, the veins are composed of orthopyroxene + brown amphibole + plagioclase. In clinopyroxene grains, the veins consist of plagioclase + brown amphibole and are accompanied by an intergrowth of brown amphibole + orthopyroxene. The mode of occurrence of the veins cannot be explained if these veins were crystallized from silicate melts. Consequently, these veins and nearby intergrowths were most likely formed by the reaction of magmatic minerals with fluid phases under the conditions of low fluid/rock ratios. Very similar intergrowths of brown amphibole + orthopyroxene are observed in clinopyroxene grains with 'interfingering' textures. It is believed, in general, that the penetration of seawater does not predate the ductile deformation within Layer 3 gabbros of the slow-spreading ridges. If this is the case, the fluid responsible for the veins did not originate from seawater because the formation of the veins and the interfingering textures preceded ductile deformation and, perhaps, complete solidification of the gabbroic crystal mush. It has been proposed, based on fluid inclusion data, that the exsolution of fluid from the latest-stage magma took place at temperatures >700°C in the slow-spreading Mid-Atlantic Ridge at the Kane Fracture Zone (MARK) area. No obvious mineralogical evidence, however, has been found for these magmatic fluids. The calculated temperatures for the veins and nearby intergrowths found in Hole 735B gabbros are up to 1000°C, and these veins are the most plausible candidate for the mineralogical expression of the migrating magmatic fluids.

Mineralogy and textures of gabbros from ODP Hole 118-735B

Abundant iron-titanium (Fe-Ti) oxide gabbro, olivine gabbro, and troctolite were drilled at Hole 735B adjacent to the Atlantis II Fracture Zone of the Southwest Indian Ridge during Leg 118. The Fe-Ti oxide gabbro occurs as intrusive bodies into olivine gabbro with very sharp intrusive contacts. The size of the intrusive bodies varies from a millimeter to a few tens of meters. Mineralogical parameters, such as anorthite content of plagioclase and Mg/(Mg+Fe) ratios of mafic minerals exhibit bimodal distributions corresponding to olivine and Fe-Ti oxide gabbros, respectively. When the two major gabbro types are looked at separately, several downhole mineralogical cycles are recognized. The Fe-Ti oxide gabbros exhibit two such cycles with plagioclase becoming more sodic and mafic minerals becoming more iron-rich downward in the drill core. The olivine gabbros and troctolites, however, exhibit two cycles showing an upward increase in sodium in plagioclase and iron in mafic minerals. The mineralogical variations of these gabbros and the intrusive contact relationships probably resulted from downward intrusion of evolved magma into underlying solid or almost solidified olivine gabbros and troctolite. The dense evolved melt at the top of the cumulus pile probably formed from the crystallization of olivine gabbro cumulates followed by extreme fractional crystallization of residual melt in an isolated, ephemeral magma chamber. The interlayered occurrence of evolved and primitive gabbros from Hole 735B represents a typical section of lower ocean crust formed at a very slow spreading ridge.