Experimental study on polyester based concretes filled with glass fibre reinforced plastic recyclates – a contribution to composite materials sustainability

The development and applications of thermoset polymeric composites, namely fibre reinforced plastics (FRP), have shifted in the last decades more and more into the mass market [1]. Despite of all advantages associated to FRP based products, the increasing production and consume also lead to an increasing amount of FRP wastes, either end-of-lifecycle products, or scrap and by-products generated by the manufacturing process itself. Whereas thermoplastic FRPs can be easily recycled, by remelting and remoulding, recyclability of thermosetting FRPs constitutes a more difficult task due to cross-linked nature of resin matrix. To date, most of the thermoset based FRP waste is being incinerated or landfilled, leading to negative environmental impacts and supplementary added costs to FRP producers and suppliers. This actual framework is putting increasing pressure on the industry to address the options available for FRP waste management, being an important driver for applied research undertaken cost efficient recycling methods. [1-2]. In spite of this, research on recycling solutions for thermoset composites is still at an elementary stage. Thermal and/or chemical recycling processes, with partial fibre recovering, have been investigated mostly for carbon fibre reinforced plastics (CFRP) due to inherent value of carbon fibre reinforcement; whereas for glass fibre reinforced plastics (GFRP), mechanical recycling, by means of milling and grinding processes, has been considered a more viable recycling method [1-2]. Though, at the moment, few solutions in the reuse of mechanically-recycled GFRP composites into valueadded products are being explored. Aiming filling this gap, in this study, a new waste management solution for thermoset GFRP based products was assessed. The mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the potential added value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. The use of a cementless concrete as host material for GFRP recyclates, instead of a conventional Portland cement based concrete, presents an important asset in avoiding the eventual incompatibility problems arisen from alkalis silica reaction between glass fibres and cementious binder matrix. Additionally, due to hermetic nature of resin binder, polymer based concretes present greater ability for incorporating recycled waste products [3]. Under this scope, different GFRP waste admixed polymer mortar (PM) formulations were analyzed varying the size grading and content of GFRP powder and fibre mix waste. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacities of modified mortars with regard to waste-free polymer mortars.

Os enfermeiros e as dimensões motivacionais : estudo não experimental, descritivo, analítico e transversal, baseado na técnica de inquérito

RESUMO - A profissão de enfermagem é definida por Virgínia Henderson (1966), como tendo por objeto "ajudar o indivíduo, saudável ou doente, na execução das atividades que contribuem para conservar a sua saúde ou a sua recuperação, de tal maneira, devendo desempenhar esta função no sentido de tornar o indivíduo o mais independente possível, ou seja, a alcançar a sua anterior independência". A atenção à saúde ao longo da história da humanidade vem sendo desenvolvida de muitos modos e por diversos atores sociais. O trabalho em saúde é essencial para a vida humana e envolve atividades realizadas por profissionais e equipas multidisciplinares que dominam os conhecimentos e técnicas essenciais para assistir o indivíduo com problemas de saúde ou em risco de adoecer, em atividades de investigação, de prevenção, curativo e de reabilitação. À Enfermagem tal como a outras profissões, são cada vez mais exigidos requisitos de eficiência, eficácia e polivalência na sua atividade, tendo a motivação um papel fundamental na atitude, postura e desempenho do profissional. Este trabalho descreve o estudo da motivação profissional, numa população de enfermeiros portugueses numa instituição privada. A versão adaptada de um inquérito como instrumento de autopreenchimento representa vários construtos implicados no processo motivacional, em contexto profissional. Pretendo com este estudo identificar a dimensão da motivação mais relevantes no processo motivacional dos enfermeiros, assim como as suas variações face a variáveis de características pessoais, profissionais e institucionais. A partir dos resultados obtidos pretendo ainda apresentar sugestões de maneira a oferecer oportunidade de transformação do seu ambiente organizacional em instituições similares.

The thermal effects on the methanol-to-olefins reaction: A modelling and experimental approach

With the projection of an increasing world population, hand-in-hand with a journey towards a bigger number of developed countries, further demand on basic chemical building blocks, as ethylene and propylene, has to be properly addressed in the next decades. The methanol-to-olefins (MTO) is an interesting reaction to produce those alkenes using coal, gas or alternative sources, like biomass, through syngas as a source for the production of methanol. This technology has been widely applied since 1985 and most of the processes are making use of zeolites as catalysts, particularly ZSM-5. Although its selectivity is not especially biased over light olefins, it resists to a quick deactivation by coke deposition, making it quite attractive when it comes to industrial environments; nevertheless, this is a highly exothermic reaction, which is hard to control and to anticipate problems, such as temperature runaways or hot-spots, inside the catalytic bed. The main focus of this project is to study those temperature effects, by addressing both experimental, where the catalytic performance and the temperature profiles are studied, and modelling fronts, which consists in a five step strategy to predict the weight fractions and activity. The mind-set of catalytic testing is present in all the developed assays. It was verified that the selectivity towards light olefins increases with temperature, although this also leads to a much faster catalyst deactivation. To oppose this effect, experiments were carried using a diluted bed, having been able to increase the catalyst lifetime between 32% and 47%. Additionally, experiments with three thermocouples placed inside the catalytic bed were performed, analysing the deactivation wave and the peaks of temperature throughout the bed. Regeneration was done between consecutive runs and it was concluded that this action can be a powerful means to increase the catalyst lifetime, maintaining a constant selectivity towards light olefins, by losing acid strength in a steam stabilised zeolitic structure. On the other hand, developments on the other approach lead to the construction of a raw basic model, able to predict weight fractions, that should be tuned to be a tool for deactivation and temperature profiles prediction.

A formação em rastreio e intervenções breves do álcool muda as atitudes dos profissionais de saúde ocupacional? : estudo quasi experimental exploratório para uma estratégia para o meio laboral

RESUMO - Estudos anteriores nos Cuidados de Saúde Primários (CSP) apontam para um incremento da Deteção Precoce (DP) e Intervenções Breves (IB) em pacientes com Problemas Ligados ao Álcool (PLA) após formação apropriada dos profissionais de saúde (com melhoria das suas atitudes). Este estudo quasi experimental, exploratório, é pioneiro no âmbito da Saúde Ocupacional (SO) para a implementação de Rastreio/DP e IB nos PLA. O objetivo principal foi avaliar se uma formação sobre Rastreio/DP e IB pode melhorar as atitudes dos profissionais de SO ao lidar com os PLA em Meio Laboral (PLAML). Foi aplicado um questionário em duas partes: Q1/pré-formação (variáveis sociodemográficas, profissionais, competências em alcoologia, experiência pessoal com álcool/familiares com PLA, dificuldades em lidar com trabalhadores com PLA, AUDIT-C e SAAPPQ) e Q2/pós-formação (avaliação da formação e das atitudes SAAPPQ - Adequação, Legitimidade, Motivação, Autoestima e Satisfação). Os resultados na amostra (N=39) revelaram um aumento sobretudo na Adequação e Satisfação. No entanto, naqueles com níveis baixos das atitudes pré-formação constou-se melhoria das atitudes à excepção da Autoestima e foram encontradas algumas associações com as características do perfil inicial dos participantes. Sugerem-se estudos posteriores para identificação de pacotes formativos mais efetivos e propostas para um Plano integrador de RIB para PLAML

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Experimental toxoplasmosis in Balb/c mice. Prevention of vertical disease transmission by treatment and reproductive failure in chronic infection

In a study of congenital transmission during acute infection of Toxoplasma gondii, 23 pregnant Balb/c mice were inoculated orally with two cysts each of the P strain. Eight mice were inoculated 6-11 days after becoming pregnant (Group 1). Eight mice inoculated on the 10th-15th day of pregnancy (Group 2) were treated with 100 mg/kg/day of minocycline 48 h after inoculation. Seven mice inoculated on the 10th-15th day of pregnancy were not treated and served as a control (Group 3). Congenital transmission was evaluated through direct examination of the brains of the pups or by bioassay and serologic tests. Congenital transmission was observed in 20 (60.6%) of the 33 pups of Group 1, in one (3.6%) of the 28 pups of Group 2, and in 13 (54.2%) of the 24 pups of Group 3. Forty-nine Balb/c mice were examined in the study of congenital transmission of T. gondii during chronic infection. The females showed reproductive problems during this phase of infection. It was observed accentuated hypertrophy of the endometrium and myometrium. Only two of the females gave birth. Our results demonstrate that Balb/c mice with acute toxoplasmosis can be used as a model for studies of congenital T. gondii infection. Our observations indicate the potential of this model for testing new chemotherapeutic agents against congenital toxoplasmosis.

Possible solution of some essential zero problems in compositional data analysis

One of the tantalising remaining problems in compositional data analysis lies in how to deal with data sets in which there are components which are essential zeros. By anessential zero we mean a component which is truly zero, not something recorded as zero simply because the experimental design or the measuring instrument has not been sufficiently sensitive to detect a trace of the part. Such essential zeros occur inmany compositional situations, such as household budget patterns, time budgets,palaeontological zonation studies, ecological abundance studies. Devices such as nonzero replacement and amalgamation are almost invariably ad hoc and unsuccessful insuch situations. From consideration of such examples it seems sensible to build up amodel in two stages, the first determining where the zeros will occur and the secondhow the unit available is distributed among the non-zero parts. In this paper we suggest two such models, an independent binomial conditional logistic normal model and a hierarchical dependent binomial conditional logistic normal model. The compositional data in such modelling consist of an incidence matrix and a conditional compositional matrix. Interesting statistical problems arise, such as the question of estimability of parameters, the nature of the computational process for the estimation of both the incidence and compositional parameters caused by the complexity of the subcompositional structure, the formation of meaningful hypotheses, and the devising of suitable testing methodology within a lattice of such essential zero-compositional hypotheses. The methodology is illustrated by application to both simulated and real compositional data

Disseny d’un muntatge experimental per les practiques de Resistència de materials

Degut a l’augment del nombre de classes i d’alumnes en l’Àrea de Mecànica de MedisContinus i Teoria d’Estructures (MMCTE), s’ha fet necessari la reestructuració i ocupació denous espais per la realització de les pràctiques de Resistència de materials.Per tal de realitzar les pràctiques al nou laboratori de Resistència de materials, calredissenyar les pràctiques referents a Allargaments longitudinals en bigues sotmeses acompressió i tracció simple i la referent a la Deformada d’una biga biarticulada amb voladís.El disseny de les noves pràctiques ha de complir les condicions exigides pel client. A més,els muntatges de cada pràctica han d’anar muntats sobre un pòrtic adquirit recientment perl’Àrea de Mecànica de Medis Continus i Teoria d’Estructures (MMCTE) que actuaran debancada. La pràctica relacionada amb Allargaments longitudinals en barres sotmeses a compressió itracció simple consta d’un muntatge experimental (Muntatge 1) i un guió de pràctiques perl’alumnat i professorat docent La pràctica relacionada amb la Deformada d’una biga biarticulada amb voladís consta d’unmuntatge experimental (Muntatge 2) i un guió de pràctiques per l’alumnat i professoratdocent. Les dos pràctiques permeten comparar els valors obtinguts experimentalment de cadamuntatge amb uns resultats teòrics i d’aquesta manera validar l’èxit de cada muntatge

Causality and endogeneity: Problems and solutions

Most leadership and management researchers ignore one key design and estimation problem rendering parameter estimates uninterpretable: Endogeneity. We discuss the problem of endogeneity in depth and explain conditions that engender it using examples grounded in the leadership literature. We show how consistent causal estimates can be derived from the randomized experiment, where endogeneity is eliminated by experimental design. We then review the reasons why estimates may become biased (i.e., inconsistent) in non-experimental designs and present a number of useful remedies for examining causal relations with non-experimental data. We write in intuitive terms using nontechnical language to make this chapter accessible to a large audience.

Knowledge and attitudes of nurses towards alcohol and related problems: the impact of an educational intervention

An exploratory study of quasi-experimental approach that aimed to verify the impact of an educational intervention on attitudes and knowledge of nurses towards alcohol use and associated problems. The sample included 185 nurses, divided into two groups: 84 submitted to a training course and formed the experimental group. Data were collected through a knowledge survey and an attitude scale. The attitudes of the participants of both groups were positive. There were no significant differences between groups in relation to knowledge. The strongest predictors of positive attitudes were possessed preparation to act with chemical dependents (OR = 2.18), "have received increased workload during graduation on the theme, 'alcohol and other drugs'" (OR = 1.70), and "completed graduate school" (OR = 2.59). The educational intervention had a positive impact on the attitudes of nurses towards alcoholics, work and interpersonal relationships with such clientele.

Photopolymerizable hydrogels for implants: Monte-Carlo modeling and experimental in vitro validation.

Photopolymerization is commonly used in a broad range of bioapplications, such as drug delivery, tissue engineering, and surgical implants, where liquid materials are injected and then hardened by means of illumination to create a solid polymer network. However, photopolymerization using a probe, e.g., needle guiding both the liquid and the curing illumination, has not been thoroughly investigated. We present a Monte Carlo model that takes into account the dynamic absorption and scattering parameters as well as solid-liquid boundaries of the photopolymer to yield the shape and volume of minimally invasively injected, photopolymerized hydrogels. In the first part of the article, our model is validated using a set of well-known poly(ethylene glycol) dimethacrylate hydrogels showing an excellent agreement between simulated and experimental volume-growth-rates. In the second part, in situ experimental results and simulations for photopolymerization in tissue cavities are presented. It was found that a cavity with a volume of 152  mm3 can be photopolymerized from the output of a 0.28-mm2 fiber by adding scattering lipid particles while only a volume of 38  mm3 (25%) was achieved without particles. The proposed model provides a simple and robust method to solve complex photopolymerization problems, where the dimension of the light source is much smaller than the volume of the photopolymerizable hydrogel.

Experimental Use of Calcium Magnesium Acetate, Addendum, HR-253, 1984

The Iowa Department of Transportation Materials Laboratory personnel developed a process to produce a road deicer consisting of sand grains coated with calcium magnesium acetate (CMA). Research project HR-253 was established to explore commercial production of the CMA/sand deicer by an independent contractor. About 60 tons of the deicer was produced at a ready-mix concrete facility and evaluated in the field during the 1983-1984 winter season. The initial contracted production of CMA/sand deicer under research project HR-253 identified two major problems: (1) excessive unreacted lime in the final product, and (2) formation of spherical lumps within the product requiring subsequent size reduction. It was recommended in the HR-253 report that additional deicer be produced as a continuation of the project in order to address these problems and further develop the production process. A contract was negotiated with W. G. Block Co. to produce and deliver 50 tons of additional deicer. This addendum report covers this production effort including descriptions and results of all modifications of equipment and process procedures used.

Experimental thermal hydraulic studies on the enhancement of safety of LWRs

The safe use of nuclear power plants (NPPs) requires a deep understanding of the functioning of physical processes and systems involved. Studies on thermal hydraulics have been carried out in various separate effects and integral test facilities at Lappeenranta University of Technology (LUT) either to ensure the functioning of safety systems of light water reactors (LWR) or to produce validation data for the computer codes used in safety analyses of NPPs. Several examples of safety studies on thermal hydraulics of the nuclear power plants are discussed. Studies are related to the physical phenomena existing in different processes in NPPs, such as rewetting of the fuel rods, emergency core cooling (ECC), natural circulation, small break loss-of-coolant accidents (SBLOCA), non-condensable gas release and transport, and passive safety systems. Studies on both VVER and advanced light water reactor (ALWR) systems are included. The set of cases include separate effects tests for understanding and modeling a single physical phenomenon, separate effects tests to study the behavior of a NPP component or a single system, and integral tests to study the behavior of the whole system. In the studies following steps can be found, not necessarily in the same study. Experimental studies as such have provided solutions to existing design problems. Experimental data have been created to validate a single model in a computer code. Validated models are used in various transient analyses of scaled facilities or NPPs. Integral test data are used to validate the computer codes as whole, to see how the implemented models work together in a code. In the final stage test results from the facilities are transferred to the NPP scale using computer codes. Some of the experiments have confirmed the expected behavior of the system or procedure to be studied; in some experiments there have been certain unexpected phenomena that have caused changes to the original design to avoid the recognized problems. This is the main motivation for experimental studies on thermal hydraulics of the NPP safety systems. Naturally the behavior of the new system designs have to be checked with experiments, but also the existing designs, if they are applied in the conditions that differ from what they were originally designed for. New procedures for existing reactors and new safety related systems have been developed for new nuclear power plant concepts. New experiments have been continuously needed.

Problems of allometric scaling analysis: examples from mammalian reproductive biology.

Biological scaling analyses employing the widely used bivariate allometric model are beset by at least four interacting problems: (1) choice of an appropriate best-fit line with due attention to the influence of outliers; (2) objective recognition of divergent subsets in the data (allometric grades); (3) potential restrictions on statistical independence resulting from phylogenetic inertia; and (4) the need for extreme caution in inferring causation from correlation. A new non-parametric line-fitting technique has been developed that eliminates requirements for normality of distribution, greatly reduces the influence of outliers and permits objective recognition of grade shifts in substantial datasets. This technique is applied in scaling analyses of mammalian gestation periods and of neonatal body mass in primates. These analyses feed into a re-examination, conducted with partial correlation analysis, of the maternal energy hypothesis relating to mammalian brain evolution, which suggests links between body size and brain size in neonates and adults, gestation period and basal metabolic rate. Much has been made of the potential problem of phylogenetic inertia as a confounding factor in scaling analyses. However, this problem may be less severe than suspected earlier because nested analyses of variance conducted on residual variation (rather than on raw values) reveals that there is considerable variance at low taxonomic levels. In fact, limited divergence in body size between closely related species is one of the prime examples of phylogenetic inertia. One common approach to eliminating perceived problems of phylogenetic inertia in allometric analyses has been calculation of 'independent contrast values'. It is demonstrated that the reasoning behind this approach is flawed in several ways. Calculation of contrast values for closely related species of similar body size is, in fact, highly questionable, particularly when there are major deviations from the best-fit line for the scaling relationship under scrutiny.

Generating highly balanced sudoku problems as hard problems

Sudoku problems are some of the most known and enjoyed pastimes, with a never diminishing popularity, but, for the last few years those problems have gone from an entertainment to an interesting research area, a twofold interesting area, in fact. On the one side Sudoku problems, being a variant of Gerechte Designs and Latin Squares, are being actively used for experimental design, as in [8, 44, 39, 9]. On the other hand, Sudoku problems, as simple as they seem, are really hard structured combinatorial search problems, and thanks to their characteristics and behavior, they can be used as benchmark problems for refining and testing solving algorithms and approaches. Also, thanks to their high inner structure, their study can contribute more than studies of random problems to our goal of solving real-world problems and applications and understanding problem characteristics that make them hard to solve. In this work we use two techniques for solving and modeling Sudoku problems, namely, Constraint Satisfaction Problem (CSP) and Satisfiability Problem (SAT) approaches. To this effect we define the Generalized Sudoku Problem (GSP), where regions can be of rectangular shape, problems can be of any order, and solution existence is not guaranteed. With respect to the worst-case complexity, we prove that GSP with block regions of m rows and n columns with m = n is NP-complete. For studying the empirical hardness of GSP, we define a series of instance generators, that differ in the balancing level they guarantee between the constraints of the problem, by finely controlling how the holes are distributed in the cells of the GSP. Experimentally, we show that the more balanced are the constraints, the higher the complexity of solving the GSP instances, and that GSP is harder than the Quasigroup Completion Problem (QCP), a problem generalized by GSP. Finally, we provide a study of the correlation between backbone variables – variables with the same value in all the solutions of an instance– and hardness of GSP.