Review of the economics of climate change (RECC) in the Caribbean project: Phase I climate change profiles in select Caribbean countries

These reports are the result of consultations which were conducted in 2008 in Aruba, Barbados, Netherlands Antilles, Dominican Republic, Guyana, Jamaica, Montserrat, Saint Lucia and Trinidad and Tobago. The objective was to obtain relevant information that would inform a Stern-type report where the economics of climate change would be examined for the Caribbean subregion. These reports will be complimented by future assessments of the costs of the “business as usual”, adaptation and mitigation responses to the potential impacts of climate change. It is anticipated that the information contained in each country report would provide a detailed account of the environmental profile and would, therefore, provide an easy point of reference for policymakers in adapting existing policy or in formulating new ones. ECLAC continues to be available to the CDCC countries to provide technical support in the area of sustainable development.

Análise do perfil ambiental do comércio entre a China e Países Latino-americanos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Life cycle assessment of concentrated solar power (CSP) and the influence of hybridising with natural gas

Purpose Concentrating Solar Power (CSP) plants based on parabolic troughs utilize auxiliary fuels (usually natural gas) to facilitate start-up operations, avoid freezing of HTF and increase power output. This practice has a significant effect on the environmental performance of the technology. The aim of this paper is to quantify the sustainability of CSP and to analyse how this is affected by hybridisation with different natural gas (NG) inputs. Methods A complete Life Cycle (LC) inventory was gathered for a commercial wet-cooled 50 MWe CSP plant based on parabolic troughs. A sensitivity analysis was conducted to evaluate the environmental performance of the plant operating with different NG inputs (between 0 and 35% of gross electricity generation). ReCiPe Europe (H) was used as LCA methodology. CML 2 baseline 2000 World and ReCiPe Europe E were used for comparative purposes. Cumulative Energy Demands (CED) and Energy Payback Times (EPT) were also determined for each scenario. Results and discussion Operation of CSP using solar energy only produced the following environmental profile: climate change 26.6 kg CO2 eq/KWh, human toxicity 13.1 kg 1,4-DB eq/KWh, marine ecotoxicity 276 g 1,4-DB eq/KWh, natural land transformation 0.005 m2/KWh, eutrophication 10.1 g P eq/KWh, acidification 166 g SO2 eq/KWh. Most of these impacts are associated with extraction of raw materials and manufacturing of plant components. The utilization NG transformed the environmental profile of the technology, placing increasing weight on impacts related to its operation and maintenance. Significantly higher impacts were observed on categories like climate change (311 kg CO2 eq/MWh when using 35 % NG), natural land transformation, terrestrial acidification and fossil depletion. Despite its fossil nature, the use of NG had a beneficial effect on other impact categories (human and marine toxicity, freshwater eutrophication and natural land transformation) due to the higher electricity output achieved. The overall environmental performance of CSP significantly deteriorated with the use of NG (single score 3.52 pt in solar only operation compared to 36.1 pt when using 35 % NG). Other sustainability parameters like EPT and CED also increased substantially as a result of higher NG inputs. Quasilinear second-degree polynomial relationships were calculated between various environmental performance parameters and NG contributions. Conclusions Energy input from auxiliary NG determines the environmental profile of the CSP plant. Aggregated analysis shows a deleterious effect on the overall environmental performance of the technology as a result of NG utilization. This is due primarily to higher impacts on environmental categories like climate change, natural land transformation, fossil fuel depletion and terrestrial acidification. NG may be used in a more sustainable and cost-effective manner in combined cycle power plants, which achieve higher energy conversion efficiencies.

Caracterización y análisis comparativo del comportamiento medioambiental de los materiales de aislamiento térmico utilizados en la envolvente del edificio, en función del sistema constructivo y de la situación geográfica

La construcción es uno de los causantes de mayor impacto ambiental y energético en el entorno. Por ello, los profesionales del sector deben empezar a cambiar la manera en la que diseñan la arquitectura, incorporando técnicas y parámetros sostenibles desde las primeras etapas del diseño, controlando la elección de los materiales y las soluciones constructivas. A través de las Declaraciones Ambientales de Producto (DAP) es posible conocer el perfil ambiental de los productos de la construcción, sin embargo, la mayoría de estos documentos solo poseen información de la etapa de producto (A1-A3) y de la etapa de fin de vida, contemplando solo un tipo de tratamiento (vertedero o incineración). Lo que propone esta investigación es generar información medioambiental del resto de las etapas del ciclo de vida relacionado con el producto, haciendo especial hincapié en la etapa de transporte (A4), puesta en obra (A5), transporte de obra a planta de tratamiento (C2) y etapa de fin de vida con vertedero e incineración. Para la realización de la investigación se ha generado un Inventario de Ciclo de Vida (ICV) con valores medios facilitados por las empresas. El ámbito de actuación es la península ibérica, considerándose un transporte en camión. La evaluación ambiental se ha realizado con la herramienta informática SimaPro (versión 7.3.3). Para los procesos que no han podido ser modelizados por falta de información, se ha recurrido a la base de datos Ecoinvent (versión 2.0). Las categorías de impacto analizadas son las contempladas en la UNE-EN ISO 15804+A1. Con esta investigación se propone una catalogación medioambiental del material de aislamiento térmico según los impactos asociados al transporte, puesta en obra y fin de vida del producto para que el prescriptor pueda escoger qué material es el más adecuado a incorporar en el proyecto, desde el punto de vista medioambiental. ABSTRACT _ Construction is one of the main causes of environmental and energy impacts in the environment. Therefore, the professionals of the sector should begin changing the way they design architecture, incorporating sustainable techniques and parameters from the first design stages, controlling the choice of materials and building solutions. It is possible to know the environmental profile of construction products through Environmental Product Declarations (EPD). However, most of these documents only provide information for the product stage (A1-A3) and the end-of-life stage, taking into account only one type of treatment (landfill or incineration). This research proposes the generation of environmental information for the rest of the life cycle stages related to the product, with particular emphasis on the transportstage (A4), construction installation (A5), transport from the construction site to the recycling facilities (C2) and end-of-life stage with landfill and incineration. A Life Cycle Inventory (LCI) has been generated for the development of the research, with mean values provided by the firms. The scope of action is the Iberian Peninsula, considering transport by lorry. The environmental assessment has been carried out with the SimaPro software (version 7.3.3). The Ecoinvent database (version 2.0) has been used for the processes that couldn’t be modelled due to lack of information. The impact categories analysed are those considered in standard UNE-EN ISO 15804+A1. This research proposes an environmental cataloguing of the thermal insulation material depending on the impacts associated with transport, construction installation and end-of-life of the product so that the prescriber might choose which material is the most suitable to implement in the project from an environmental point of view.

Avaliação do desempenho ambiental de alternativas de reaproveitamento de vinhaça decorrente da produção de etanol.

A obtenção de etanol a partir de rotas alcoolquímicas consagradas gera resíduos com potencial de aproveitamento, tanto em outros setores produtivos como no ciclo produtivo do próprio combustível. Este é o caso de torta de filtro e vinhaça. A vinhaça em particular costuma ser devolvida ao campo com o intuito de ajustar teores nutricionais do solo no cultivo da cana. No entanto, estudos ambientais destacam que esta alternativa traz efeitos negativos sobre os meios receptores (água e solo), condição que abre a perspectiva para exploração de usos alternativos dessas substâncias. Este estudo se propôs a contribuir para o tema ao avaliar de forma sistêmica o desempenho ambiental de duas alternativas de reaproveitamento de vinhaça: (i) reuso no campo em processos de fertirrigação, alternativa consolidada no Brasil, e (ii) reuso da fração líquida da vinhaça em etapas diversas do processo industrial de obtenção de etanol. Em qualquer das situações fez-se uso da técnica de Avaliação de Ciclo de Vida - ACV para proceder tal verificação. A análise ambiental da prática de reuso de vinhaça e torta para fertirrigação foi conduzida a partir da comparação de cenários que consideraram a forma de suprimento de nutrientes para a cana e o método de colheita. A avaliação de impactos ocorreu em dois níveis: quanto ao consumo de recursos, a partir de Primary Energy Demand (PED); e em termos de emissões para o ambiente por meio da elaboração do Perfil Ambiental. Uma Análise de Sensibilidade foi também realizada para verificar o efeito de oscilações dos teores de Nitrogênio (N), Fósforo (P) e Potássio (K) na composição da vinhaça sobre os resultados obtidos, caso da primeira alternativa. Concluiu-se para esse caso que a substituição parcial de fertilizantes químicos por vinhaça traz aumento da Demanda de Energia Primária global para ambos os métodos de colheita. Em termos de Perfil Ambiental, a comparação entre cenários das mesmas práticas de manejo mostrou que a troca de adubos por vinhaça e torta é positiva para o desempenho ambiental do etanol por reduzir impactos quanto a Mudanças Climáticas (CC), Acidificação Terrestre (TA) e Toxicidade Humana (HT). Por outro lado, o tratamento de vinhaça para reposição de água na etapa industrial resultou em aumento global das contribuições para as categorias acima mencionadas além de incrementos para Eutrofização de água doce (FEut) e Ecotoxicidade de água doce (FEC), a despeito de ser constatada a redução de 45% quanto a Depleção de água (WD). Os aumentos no impacto se deveram principalmente aos efeitos negativos causados durante a produção do CaO usado no processo de tratamento da vinhaça. No entanto, a substituição deste insumo por NaOH só representou melhora em termos de CC. Pode-se concluir que a reutilização de vinhaça e de torta de filtro como complemento nutricional para o cultivo de cana-de-açúcar resultou em uma alternativa mais adequada de reaproveitamento do que o se este fluído fosse reutilizado para suprir parte da demanda hídrica de processo, mesmo quando o consumo de água na etapa industrial tenha inexoravelmente se reduzido a partir da implantação dessa medida.

Behavioral profile of adults with Prader-Willi syndrome : correlations with individual and environmental variables

Background: Maladaptive behavior has been reported as a phenotypical feature in Prader–Willi syndrome (PWS). It severely limits social adaptation and the quality of life of children and adults with the syndrome. Different factors have been linked with the intensity and form of these behavioral disturbances but there is no consensus about the cause. Consequently, there is still controversy regarding management strategies and there is a need for new data. Methods: The behavior of 100 adults with PWS attending a dedicated center was assessed using the Developmental Behavior Checklist for Adults (DBC-A) and the PWS-specific Hyperphagia Questionnaire. The DBC-A was completed separately by trained caregivers at the center and relatives or caregivers in a natural setting. Genotype, gender, age, degree of obesity and cognitive impairment were analyzed as variables with a hypothetical influence on behavioral features. Results: Patients showed a relatively high rate of behavioral disturbances other than hyperphagia. Disruptive and social relating were the highest scoring DBC-A subscales whereas anxiety/antisocial and self-absorbed were the lowest. When hospital caregiver and natural caregiver scores were compared, scores for the latter were higher for all subscales except for disruptive and anxiety/antisocial. These effects of institutional management were underlined. In the DBC-A, 22 items have descriptive indications of PWS behavior and were used for further comparisons and correlation analysis. In contrast to previous reports, rates of disturbed behavior were lower in patients with a deletion genotype. However, the behavioral profile was similar for both genotypes. No differences were found in any measurement when comparing type I and type II deletions. The other analyzed variables showed little relevance. Conclusions: Significant rates of behavioral disorders were highlighted and their typology described in a large cohort of adults with PWS. The deletion genotype was related to a lower severity of symptoms. Some major behavioral problems, such as hyperphagia, may be well controlled if living circumstances are adapted to the specific requirements of individuals with PWS.

Predicting the profile of nutrients available for absorption: from nutrient requirement to animal response and environmental impact

Current feed evaluation systems for dairy cattle aim to match nutrient requirements with nutrient intake at pre-defined production levels. These systems were not developed to address, and are not suitable to predict, the responses to dietary changes in terms of production level and product composition, excretion of nutrients to the environment, and nutrition related disorders. The change from a requirement to a response system to meet the needs of various stakeholders requires prediction of the profile of absorbed nutrients and its subsequent utilisation for various purposes. This contribution examines the challenges to predicting the profile of nutrients available for absorption in dairy cattle and provides guidelines for further improved prediction with regard to animal production responses and environmental pollution. The profile of nutrients available for absorption comprises volatile fatty acids, long-chain fatty acids, amino acids and glucose. Thus the importance of processes in the reticulo-rumen is obvious. Much research into rumen fermentation is aimed at determination of substrate degradation rates. Quantitative knowledge on rates of passage of nutrients out of the rumen is rather limited compared with that on degradation rates, and thus should be an important theme in future research. Current systems largely ignore microbial metabolic variation, and extant mechanistic models of rumen fermentation give only limited attention to explicit representation of microbial metabolic activity. Recent molecular techniques indicate that knowledge on the presence and activity of various microbial species is far from complete. Such techniques may give a wealth of information, but to include such findings in systems predicting the nutrient profile requires close collaboration between molecular scientists and mathematical modellers on interpreting and evaluating quantitative data. Protozoal metabolism is of particular interest here given the paucity of quantitative data. Empirical models lack the biological basis necessary to evaluate mitigation strategies to reduce excretion of waste, including nitrogen, phosphorus and methane. Such models may have little predictive value when comparing various feeding strategies. Examples include the Intergovernmental Panel on Climate Change (IPCC) Tier II models to quantify methane emissions and current protein evaluation systems to evaluate low protein diets to reduce nitrogen losses to the environment. Nutrient based mechanistic models can address such issues. Since environmental issues generally attract more funding from governmental offices, further development of nutrient based models may well take place within an environmental framework.

Profile of environmental quality.

Description based on: Sept. 1980.

Profile of environmental quality.

Description based on: Sept. 1980.

Profile of environmental quality.

Description based on: Sept. 1980.

Profile of environmental quality.

Description based on: Sept. 1980.

Environmental quality profile, 1972-1976, Winnebago County, Illinois /

Mode of access: Internet.

Student Independent Projects Environmental Studies 2011: A Values Profile for a Healthy, Sustainable Corner Brook Community

We now live in a world where urbanization has become the norm. Approximately half the world now lives in cities(O'brien, 2008). In recent years for a province like Newfoundland and Labrador which has relied heavily on one industry, the fishery, this statistic holds a lot of meaning. For well over a century there has been a continuing movement from Newfoundland to other parts of Canada and the US. Between 1971 and 1998 alone, net out-migration amounted 20% of the provinces population. This exodus has become a significant part of Newfoundland culture (Bowering Delisle, 2008). Communities have declining populations because families can no longer afford to live in their communities. For places like Corner Brook though citizens do not feel the urge to move to bigger urban centers like St. John's or places on the mainland. The purpose of this paper is to outline values which maybe keeping Corner Brook residents from uprooting their families to move to bigger urban centers such as St. John's, in order to be able to support ther families, get experience in their fields or to just acquire a job like many other people around the province.

Environmental factors correlated with the metabolite profile of Vitis vinifera cv. Pinot Noir berry skins along a European latitudinal gradient

Mature berries of Pinot Noir grapevines were sampled across a latitudinal gradient in Europe, from southern Spain to central Germany. Our aim was to study the influence of latitude-dependent environmental factors on the metabolite composition (mainly phenolic compounds) of berry skins. Solar radiation variables were positively correlated with flavonols and flavanonols and, to a lesser extent, with stilbenes and cinnamic acids. The daily means of global and erythematic UV solar radiation over long periods (bud break-veraison, bud break-harvest, and veraison-harvest), and the doses and daily means in shorter development periods (5–10 days before veraison and harvest) were the variables best correlated with the phenolic profile. The ratio between trihydroxylated and monohydroxylated flavonols, which was positively correlated with antioxidant capacity, was the berry skin variable best correlated with those radiation variables. Total flavanols and total anthocyanins did not show any correlation with radiation variables. Air temperature, degree days, rainfall, and aridity indices showed fewer correlations with metabolite contents than radiation. Moreover, the latter correlations were restricted to the period veraison-harvest, where radiation, temperature, and water availability variables were correlated, making it difficult to separate the possible individual effects of each type of variable. The data show that managing environmental factors, in particular global and UV radiation, through cultural practices during specific development periods, can be useful to promote the synthesis of valuable nutraceuticals and metabolites that influence wine quality.