Static and Dynamic Integrated Expert Systems: State of the Art, Problems and Trends

Systemized analysis of trends towards integration and hybridization in contemporary expert systems is conducted, and a particular class of applied expert systems, integrated expert systems, is considered. For this purpose, terminology, classification, and models, proposed by the author, are employed. As examples of integrated expert systems, Russian systems designed in this field and available to the majority of specialists are analyzed.

Using the Simulation Modeling Methods for the Designing Real-Time Integrated Expert Systems

Certain theoretical and methodological problems of designing real-time dynamical expert systems, which belong to the class of the most complex integrated expert systems, are discussed. Primary attention is given to the problems of designing subsystems for modeling the external environment in the case where the environment is represented by complex engineering systems. A specific approach to designing simulation models for complex engineering systems is proposed and examples of the application of this approach based on the G2 (Gensym Corp.) tool system are described.

Systems Modeling of Lung Cancer Screening Programs to Improve Quality

Thesis (Master's)--University of Washington, 2016-08

Mission and Scenario Planning for Unmanned Aerial Vehicles (Path Planning and Collision Avoidance Systems)

As unmanned autonomous vehicles (UAVs) are being widely utilized in military and civil applications, concerns are growing about mission safety and how to integrate dierent phases of mission design. One important barrier to a coste ective and timely safety certication process for UAVs is the lack of a systematic approach for bridging the gap between understanding high-level commander/pilot intent and implementation of intent through low-level UAV behaviors. In this thesis we demonstrate an entire systems design process for a representative UAV mission, beginning from an operational concept and requirements and ending with a simulation framework for segments of the mission design, such as path planning and decision making in collision avoidance. In this thesis, we divided this complex system into sub-systems; path planning, collision detection and collision avoidance. We then developed software modules for each sub-system

Phase equilibria and thermodynamics of zinc fuming slags

A range of materials is treated in zinc fuming processes to recover metal values and produce benign slag waste products. The selection of the optimum process conditions in these various technologies can be greatly assisted by the use of a chemical thermodynamic model of the system. In this paper the effects of slag chemistry on the liquidus temperatures, subliquidus phase equilibria and thermodynamic properties are described by the F*A*C*T computer package with the new thermodynamic database of the ZnO-PbO-FeO-Fe2O3-CaO-SiO2 system. The implications of these findings for plant practice are discussed.

Tuning Iris Recognition for Noisy Images

The use of iris recognition for human authentication has been spreading in the past years. Daugman has proposed a method for iris recognition, composed by four stages: segmentation, normalization, feature extraction, and matching. In this paper we propose some modifications and extensions to Daugman's method to cope with noisy images. These modifications are proposed after a study of images of CASIA and UBIRIS databases. The major modification is on the computationally demanding segmentation stage, for which we propose a faster and equally accurate template matching approach. The extensions on the algorithm address the important issue of pre-processing that depends on the image database, being mandatory when we have a non infra-red camera, like a typical WebCam. For this scenario, we propose methods for reflection removal and pupil enhancement and isolation. The tests, carried out by our C# application on grayscale CASIA and UBIRIS images show that the template matching segmentation method is more accurate and faster than the previous one, for noisy images. The proposed algorithms are found to be efficient and necessary when we deal with non infra-red images and non uniform illumination.

Risk Analysis and Behavior of Electricity Portfolio Aggregator

The scope of this paper is to adapt the standard mean-variance model of Henry Markowitz theory, creating a simulation tool to find the optimal configuration of the portfolio aggregator, calculate its profitability and risk. Currently, there is a deep discussion going on among the power system society about the structure and architecture of the future electric system. In this environment, policy makers and electric utilities find new approaches to access the electricity market; this configures new challenging positions in order to find innovative strategies and methodologies. Decentralized power generation is gaining relevance in liberalized markets, and small and medium size electricity consumers are also become producers (“prosumers”). In this scenario an electric aggregator is an entity that joins a group of electric clients, customers, producers, “prosumers” together as a single purchasing unit to negotiate the purchase and sale of electricity. The aggregator conducts research on electricity prices, contract terms and conditions in order to promote better energy prices for their clients and allows small and medium customers to benefit improved market prices.

Particle swarm design of digital circuits

Swarm Intelligence (SI) is the property of a system whereby the collective behaviors of (unsophisticated) agents interacting locally with their environment cause coherent functional global patterns to emerge. Particle swarm optimization (PSO) is a form of SI, and a population-based search algorithm that is initialized with a population of random solutions, called particles. These particles are flying through hyperspace and have two essential reasoning capabilities: their memory of their own best position and knowledge of the swarm's best position. In a PSO scheme each particle flies through the search space with a velocity that is adjusted dynamically according with its historical behavior. Therefore, the particles have a tendency to fly towards the best search area along the search process. This work proposes a PSO based algorithm for logic circuit synthesis. The results show the statistical characteristics of this algorithm with respect to number of generations required to achieve the solutions. It is also presented a comparison with other two Evolutionary Algorithms, namely Genetic and Memetic Algorithms.

Tuning and application of integer and fractional order PID controllers

Fractional calculus (FC) is widely used in most areas of science and engineering, being recognized its ability to yield a superior modeling and control in many dynamical systems. In this perspective, this article illustrates two applications of FC in the area of control systems. Firstly, is presented a methodology of tuning PID controllers that gives closed-loop systems robust to gain variations. After, a fractional-order PID controller is proposed for the control of an hexapod robot with three dof legs. In both cases, it is demonstrated the system's superior performance by using the FC concepts.

Robotic manipulators with vibrations: short time fourier transform of fractional spectra

This paper analyzes the signals captured during impacts and vibrations of a mechanical manipulator. In order to acquire and study the signals an experimental setup is implemented. The signals are treated through signal processing tools such as the fast Fourier transform and the short time Fourier transform. The results show that the Fourier spectrum of several signals presents a non integer behavior. The experimental study provides valuable results that can assist in the design of a control system to deal with the unwanted effects of vibrations.

ECG biometrics using a dissimilarity space representation

Electrocardiogram (ECG) biometrics are a relatively recent trend in biometric recognition, with at least 13 years of development in peer-reviewed literature. Most of the proposed biometric techniques perform classifi-cation on features extracted from either heartbeats or from ECG based transformed signals. The best representation is yet to be decided. This paper studies an alternative representation, a dissimilarity space, based on the pairwise dissimilarity between templates and subjects' signals. Additionally, this representation can make use of ECG signals sourced from multiple leads. Configurations of three leads will be tested and contrasted with single-lead experiments. Using the same k-NN classifier the results proved superior to those obtained through a similar algorithm which does not employ a dissimilarity representation. The best Authentication EER went as low as 1:53% for a database employing 503 subjects. However, the employment of extra leads did not prove itself advantageous.

Aplicação da abordagem KAIZEN na produção de artigos de papelaria

No âmbito da unidade curricular Tese/Dissertação do 2ºano do Mestrado em Engenharia Eletrotécnica – Ramo Sistemas e Planeamento Industrial do Instituto Superior de Engenharia do Porto, o presente trabalho descreve o estágio curricular efetuado num projeto industrial de melhoria em parceria com o Kaizen Institute, uma empresa de consultoria operacional. Este projeto foi desenvolvido numa empresa de produção e redistribuição de artigos de papelaria e escritório, a Firmo AVS – Papeis e Papelaria,S.A.. O acordo efetuado entre o Kaizen Institute e a Firmo AVS foi o de promover e incutir a cultura da melhoria continua e da mudança de atitudes e comportamentos por parte dos colaboradores da Firmo, sendo que numa fase inicial o foco do projeto foi o departamento de produção de envelopes, designada por área piloto, expandindo-se posteriormente a metodologia Kaizen aos restantes departamentos. A realização deste projeto teve como objetivo a implementação de conceitos elementares de melhoria continua nomeadamente alguns pilares ou ferramentas do Total Flow Management (TFM) e do Kaizen Management System (KMS) na empresa Firmo, de forma a reduzir ou eliminar desperdícios, incremento do envolvimento dos colaboradores, melhoria da comunicação e trabalho em equipa, estandardização de processos produtivos, criação de normas de trabalho, utilização de ferramentas SMED para a redução de tempos improdutivos e aumento da produtividade. Várias foram as dificuldades presentes no terreno para a implementação destes objetivos mas com as diversas ferramentas e workshops realizados na organização, conseguiu-se o envolvimento de todos os colaboradores da organização e a obtenção de resultados satisfatórios nomeadamente ao nível da comunicação e trabalho em equipa, organização e limpeza dos postos de trabalho, standard work (normalização do trabalho), diminuição do lead time nos processos produtivos e consequente aumento de produtividade.

Thrombophilia screening: An artificial neural network approach

Thrombotic disorders have severe consequences for the patients and for the society in general, being one of the main causes of death. These facts reveal that it is extremely important to be preventive; being aware of how probable is to have that kind of syndrome. Indeed, this work will focus on the development of a decision support system that will cater for an individual risk evaluation with respect to the surge of thrombotic complaints. The Knowledge Representation and Reasoning procedures used will be based on an extension to the Logic Programming language, allowing the handling of incomplete and/or default data. The computational framework in place will be centered on Artificial Neural Networks.

Semantiikan hyödyntäminen dokumenttienhallinnassa

Työn tavoitteena on etsiä asiakasyritykselle sähköteknisen dokumentoinnin hallintaan sopiva järjestelmäratkaisu vertailemalla insinööritoimistojen käyttämien suunnittelujärjestelmien ja yleisten dokumenttien hallintajärjestelmien soveltuvuutta asiakasympäristöön. Työssä tutkitaan sopivien metatietojen kuvaustapojen käyttökelpoisuutta sähköteknisen dokumentoinnin hallintaan esimerkkiprojektien avulla. Työn sisältö koostuu neljästä pääkohdasta. Ensimmäisessä jaksossa tarkastellaan dokumentin ominaisuuksia ja elinkaarta luonnista aktiivikäyttöön, arkistointiin ja hävitykseen. Samassa yhteydessä kerrotaan dokumenttienhallinnan perustehtävistä. Toisessa jaksossa käsitellään dokumenttien kuvailun tavoitteita, kuvailusuosituksia ja -standardeja sekä luonnollisen kielen käyttöä sisällönkuvailussa. Tarkastelukohteina suosituksista ovat W3C:n julkaisemat suositukset, Dublin Core, JHS 143 ja SFS-EN 82045. Kolmannessa jaksossa tarkastellaan teollisuuden dokumentoinnin ominaispiirteitä ja käyttötarkoitusta. Teollisuudessa on monia erilaisia järjestelmäympäristöjä tehtaan sisällä ja työssä kuvataan dokumenttienhallinnan integrointitarpeita muihin järjestelmiin. Viimeisessä jaksossa kuvaillaan erilaisia dokumentoinnin hallintaympäristöjä alkaen järeimmästä päästä tuotetiedon hallintajärjestelmistä siirtyen pienempiinsuunnittelujärjestelmiin ja lopuksi yleisiin dokumenttien hallintajärjestelmiin. Tässä osassa on myös luettelo ohjelmistotoimittajista. Työn tuloksena on laadittu valituista dokumenttityypeistä metatietokuvaukset kahden eri kuvaustavan (JHS 143 ja SFS-EN 82045) avulla ja on todettu molemmat kuvaustavat käyttökelpoisiksi sähköteknisen dokumentoinnin käsittelyyn.Nämä kuvaukset palvelevat asiakasta dokumenttienhallintaprojektin määrittelytyössä. Asiakkaalle on tehty myös vertailu sopivista järjestelmävaihtoehdoista hankintaa varten.

Population ageing and ICT: An exploratory review of technology innovation trough digital applications

The multidimensional process of physical, psychological, and social change produced by population ageing affects not only the quality of life of elderly people but also of our societies. Some dimensions of population ageing grow and expand over time (e.g. knowledge of the world events, or experience in particular situations), while others decline (e.g. reaction time, physical and psychological strength, or other functional abilities like reduced speed and tiredness). Information and Communication Technologies (ICTs) can help elderly to overcome possible limitations due to ageing. As a particular case, biometrics can allow the development of new algorithms for early detection of cognitive impairments, by processing continuous speech, handwriting or other challenged abilities. Among all possibilities, digital applications (Apps) for mobile phones or tablets can allow the dissemination of such tools. In this article, after presenting and discussing the process of population ageing and its social implications, we explore how ICTs through different Apps can lead to new solutions for facing this major demographic challenge.