A hybrid simulated annealing and perturb and observe method for maximum power point tracking in PV systems under partial shading conditions

This paper presents a hybrid method for Maximum Power Point Tracking (MPPT) of a Photovoltaic (PV) system which experiences non-uniform environmental conditions or partial shading conditions. The hybrid method combines two simple techniques with complementary strengths in achieving Global MPPT. Simulated Annealing (SA) has only recently been applied to PV MPPT and is very effective at locating global maxima with limited implementation complexity. Perturb and Observe (P&O) is a very common technique which provides continuous tracking of the MPP in a simple and easy to implement manner. The P&O method is generally incapable of locating global maxima, and the SA based method is unable to perform continuous searching. By merging these techniques in a hybrid MPPT method consisting of a global searching stage and a local searching stage, the tracking performance is improved compared to what each technique could achieve independently. Simulation results are presented to demonstrate the effectiveness of the proposed hybrid technique.

Maximum power point tracking techniques for photovoltaic systems: a comprehensive review and comparative analysis

Maximum Power Point Tracking (MPPT) is an important concern in Photovoltaic (PV) systems. As PV systems have a high cost of energy it is essential that they are operated to extract the maximum possible power at all times. However, under non-uniform environmental conditions, which frequently arise in the outdoor environment, many MPPT techniques will fail to track the global peak power. This review paper discusses conventional MPPT techniques designed to operate under uniform environmental conditions and highlights why these techniques fail under non-uniform conditions. Following this, techniques designed specifically to operate under non-uniform environmental conditions are analysed and compared. Simulation results which compare the performance of the common Perturb and Observe (P&O) method, the Particle Swarm Optimisation (PSO) and the Simulated Annealing (SA) MPPT approaches under non-uniform environmental conditions are also presented. The research presented in this review indicates that there is no single technique which can achieve reliable global MPPT with low cost and complexity and be easily adapted to different PV systems.

Efficient photovoltaic system maximum power point tracking using a new technique

Partial shading is an unavoidable condition which significantly reduces the efficiency and stability of a photovoltaic (PV) system. When partial shading occurs the system has multiple-peak output power characteristics. In order to track the global maximum power point (GMPP) within an appropriate period a reliable technique is required. Conventional techniques such as hill climbing and perturbation and observation (P&O) are inadequate in tracking the GMPP subject to this condition resulting in a dramatic reduction in the efficiency of the PV system. Recent artificial intelligence methods have been proposed, however they have a higher computational cost, slower processing time and increased oscillations which results in further instability at the output of the PV system. This paper proposes a fast and efficient technique based on Radial Movement Optimization (RMO) for detecting the GMPP under partial shading conditions. The paper begins with a brief description of the behavior of PV systems under partial shading conditions followed by the introduction of the new RMO-based technique for GMPP tracking. Finally, results are presented to demonstration the performance of the proposed technique under different partial shading conditions. The results are compared with those of the PSO method, one of the most widely used methods in the literature. Four factors, namely convergence speed, efficiency (power loss reduction), stability (oscillation reduction) and computational cost, are considered in the comparison with the PSO technique.

A simulated annealing global maximum power point tracking approach for PV modules under partial shading conditions

This paper proposes a simulated annealing (SA)-based global maximum power point tracking (GMPPT) technique designed for photovoltaic (PV) systems which experience partial shading conditions (PSC). The proposed technique is compared with the common perturb and observe MPPT technique and the particle swarm optimization method for GMPPT. The performance is assessed by considering the time taken to converge and the number of sample cases where the technique converges to the GMPP. Simulation results indicate the improved performance of the SA-based GMPPT algorithm, with arbitrarily selected parameters, in tracking to the global maxima in a multiple module PV system which experiences PSC. Experimental validation of the technique is presented based on PV modules that experience nonuniform environmental conditions. Additionally, studies regarding the influence of the key parameters of the SA-based algorithm are described. Simulation and experimental results verify the effectiveness of the proposed GMPPT method.

Maximum power point tracking methods for PV systems

Maximum power point tracking (MPPT) is an important consideration in photovoltaic (PV) systems. These systems exhibit variable nonlinear current–voltage (I–V) and power–voltage (P–V) characteristics which vary with environmental conditions. The optimum operation of a PV system occurs when the system operates at the unique maximum power point (MPP) for the given environmental conditions. Key environmental conditions include the irradiance on the cell, temperature of the cell and any shading phenomenon. Shading can occur due to objects, dust or dirt and module mismatch arising from damage or manufacturing tolerances. These shading effects introduce further nonlinearity into the I–V and P–V characteristics of the system. An extensive variety of MPPT techniques has been proposed which vary from simple estimation techniques to advanced tracking techniques. In this chapter, the criteria for assessing the performance of MPPT methods are defined followed by a complete description and discussion of both techniques designed for uniform environmental conditions and those designed for nonuniform environmental conditions.

PV string per-module maximum power point enabling converters

Many grid connected PV installations consist of a single series string of PV modules and a single DC-AC inverter. This efficiency of this topology can be enhanced with additional low power, low cost per panel converter modules. Most current flows directly in the series string which ensures high efficiency. However parallel Cúk or buck-boost DC-DC converters connected across each adjacent pair of modules now support any desired current difference between series connected PV modules. Each converter “shuffles” the desired difference in PV module currents between two modules and so on up the string. Spice simulations show that even with poor efficiency, these modules can make a significant improvement to the overall power which can be recovered from partially shaded PV strings.

Real time maximum power conversion tracking and resonant frequency modification for high power piezoelectric ultrasound transducer

Piezoelectric ultrasound transducers are commonly used to convert mechanical energy to electrical energy and vice versa. The transducer performance is highly affected by the frequency at which it is excited. If excitation frequency and main resonant frequency match, transducers can deliver maximum power. However, the problem is that main resonant frequency changes in real time operation resulting in low power conversion. To achieve the maximum possible power conversion, the transducer should be excited at its resonant frequency estimated in real time. This paper proposes a method to first estimate the resonant frequency of the transducer and then tunes the excitation frequency accordingly in real time. The measurement showed a significant difference between the offline and real time resonant frequencies. Also, it was shown that the maximum power was achieved at the resonant frequency estimated in real time compare to the one measured offline.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part I. Mathematical modeling

The conventional Newton and fast decoupled power flow (FDPF) methods have been considered inadequate to obtain the maximum loading point of power systems due to ill-conditioning problems at and near this critical point. It is well known that the PV and Q-theta decoupling assumptions of the fast decoupled power flow formulation no longer hold in the vicinity of the critical point. Moreover, the Jacobian matrix of the Newton method becomes singular at this point. However, the maximum loading point can be efficiently computed through parameterization techniques of continuation methods. In this paper it is shown that by using either theta or V as a parameter, the new fast decoupled power flow versions (XB and BX) become adequate for the computation of the maximum loading point only with a few small modifications. The possible use of reactive power injection in a selected PV bus (Q(PV)) as continuation parameter (mu) for the computation of the maximum loading point is also shown. A trivial secant predictor, the modified zero-order polynomial which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used in predictor step. These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approach for the IEEE test systems (14, 30, 57 and 118 buses) are presented and discussed in the companion paper. The results show that the characteristics of the conventional method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that parameters can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. (C) 2003 Elsevier B.V. All rights reserved.

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Locating the maximum power point for thermoelectric generators for constant heat operation

Thermoelectric generators (TEGs) are solid-state devices that can be used for the direct conversion between heat and electricity. These devices are an attractive option for generating clean energy from heat. There are two modes of operation for TEGs; constant heat and constant temperature. It is a well-known fact that for constant temperature operation, TEGs have a maximum power point lying at half the open circuit voltage of the TEG, for a particular temperature. This work aimed to investigate the position of the maximum power point for Bismuth Telluride TEGs working under constant heat conditions i.e. the heat supply to the TEG is fixed however the temperature across the TEG can vary depending upon its operating conditions. It was found that for constant heat operation, the maximum power point for a TEG is greater than half the open circuit voltage of the TEG.

Mathematical analysis of maximum power generated by photovoltaic systems and fitting curves for standard test conditions

The rural electrification is characterized by geographical dispersion of the population, low consumption, high investment by consumers and high cost. Moreover, solar radiation constitutes an inexhaustible source of energy and in its conversion into electricity photovoltaic panels are used. In this study, equations were adjusted to field conditions presented by the manufacturer for current and power of small photovoltaic systems. The mathematical analysis was performed on the photovoltaic rural system I- 100 from ISOFOTON, with power 300 Wp, located at the Experimental Farm Lageado of FCA/UNESP. For the development of such equations, the circuitry of photovoltaic cells has been studied to apply iterative numerical methods for the determination of electrical parameters and possible errors in the appropriate equations in the literature to reality. Therefore, a simulation of a photovoltaic panel was proposed through mathematical equations that were adjusted according to the data of local radiation. The results have presented equations that provide real answers to the user and may assist in the design of these systems, once calculated that the maximum power limit ensures a supply of energy generated. This real sizing helps establishing the possible applications of solar energy to the rural producer and informing the real possibilities of generating electricity from the sun.

Efficienza energetica dei sistemi acquedottistici: ruolo delle perdite idriche

Il lavoro di ricerca esplora il panorama dell’efficienza energetica dei sistemi acquedottistici, soffermandosi a considerare possibili indicatori che possano valutarla in maniera corretta e completa, in particolare nei confronti della presenza di perdite in rete. Si prendono in considerazione con maggiore attenzione, tra tutte le strategie per aumentare l’efficienza energetica, quelle che contemporaneamente producono anche risparmi idrici, come la riduzione della pressione e la ricerca attiva delle perdite . Dopo un inquadramento internazionale, sono stati analizzati mediante mappe tematiche di intensità energetica, i consumi energetici specifici sui sistemi acquedottistici della regione Emilia Romagna per gli anni 2006 e 2007, si è passati ad una analisi critica degli indicatori attualmente in uso. Inoltre per casi di studio sintetici e tutti i casi di studio proposti, si sono valutate curve di relazione tra percentuale di perdita idrica e aumento del consumo energetico, in grado di dare indicazioni su come ciascun sistema reagisce, in termini di aumento dell’energia consumata, all’aumentare del livello di perdita. Questa relazione appare fortemente influenzata da fattori come la modalità di pompaggio, la posizione delle rotture sulla rete e la scabrezza delle condotte. E’ emersa la necessità solo poter analizzare separatamentel’influenza sull’efficienza energeticadei sistemi di pompaggio e della rete, mostrando il ruolo importante con cui questa contribuisce all’efficienza globale del sistema. Viene proposto uno sviluppo ulteriore dell’indicatore GEE Global Energy Efficiency (Abadia, 2008), che consente di distinguere l’impatto sull’efficienza energetica dovuto alle perdite idriche e alla struttura intrinseca della rete, in termini di collocazione reciproca tra risorsa idrica e domanda e schema impiantistico.Questa metodologia di analisi dell’efficienza energetica è stata applicata ai casi di studio, sia sintetici che reali, il distretto di Marzaglia (MO) e quello di Mirabello (FE), entrambi alimentati da pompe a giri variabili.. La ricerca ha consentito di mostrare inoltre il ruolo della modellazione numerica in particolare nell’analisi dell’effetto prodotto sull’efficienza energetica dalla presenza di perdite idriche. Nell’ultimo capitolo si completa la panoramica dei benefici ottenibili attraverso la riduzione della pressione, che nei casi citati viene conseguita tramite pompe asservite ad inverter, con il caso di studio del distretto Bolognina all’interno del sistema di distribuzione di Bologna, che vede l’utilizzo di valvole riduttrici di pressione. Oltre a stimare il risparmio energetico derivante dalla riduzione delle perdite ottenuta tramite le PRV, sono stati valutati su modello i benefici energetici conseguenti all’introduzione nel distretto di turbine per la produzione di energia

Dematerializzazione e risparmio energetico in Hera spa: Analisi LCA e titoli di efficienza energetica.

Il seguente lavoro di tesi è stato svolto in Hera S.p.A. Il caso di studio riguarda il passaggio dalla bolletta cartacea alla bolletta elettronica. In particolare, sono stati messi a confronto i due modelli di bollettazione attraverso l'analisi LCA. In seguito sono stati calcolati i risparmi energetici conseguiti, misurati in tep, attraverso i quali è stato possibile creare una proposta di scheda tecnica per la quantificazione dei risparmi di energia primaria.