The Design and Implementation of Loudspeaker Control Network Protocols

The networking and digitalization of audio equipment has created a need for control protocols. These protocols offer new services to customers and ensure that the equipment operates correctly. The control protocols used in the computer networks are not directly applicable since embedded systems have resource and cost limitations. In this master's thesis the design and implementation of new loudspeaker control network protocols are presented. The protocol stack was required to be reliable, have short response times, configure the network automatically and support the dynamic addition and removal of loudspeakers. The implemented protocol stack was also required to be as efficient and lightweight as possible because the network nodes are fairly simple and lack processing power. The protocol stack was thoroughly tested, validated and verified. The protocols were formally described using LOTOS (Language of Temporal Ordering Specifications) and verified using reachability analysis. A prototype of the loudspeaker network was built and used for testing the operation and the performance of the control protocols. The implemented control protocol stack met the design specifications and proved to be highly reliable and efficient.

Digital printing delivering value to the value network: CASE: STORA ENSO OYJ

Tutkielman tavoitteena oli tutkia, millaista arvoa digitaalinen painatusmenetelmä tuo yrityksen arvoverkostoon. Teoriaosassa tavoite oli rakentaa digitaalipainatuksen arvoverkostoa tutkien kirjallisuutta liittyen arvoketju- ja arvoverkostoajatteluun. Myös aiemmat tutkimukset ja kirjallisuus liittyen digitaalipainatukseen rakensivat osaltaan teoreettisen viitekehyksen muodostumista. Aiemmat tutkimukset digitaalisen painomenetelmän mahdollisuuksista ovat hyvin tekniikkapainotteisia, siksi tämä tutkimus liittyy enemmän kaupallisiin mahdollisuuksiin. Empiirinen osio tutkimuksesta tehtiin kvalitatiivisena case -tutkimuksena, johon sisältyi yksi alayksikkö. Eli tutkittiin yhtä casea, jossa oli kaksi osapuolta. Tutkielma liittyy kiinteästi Stora Enson ja Valion väliseen digipainatus-projektiin, joka käynnistettiin helmikuussa 2001. Tutkielman teemahaastatteluihin valittiin henkilöt tästä projektiryhmästä. Projektiryhmän mielipiteitä ja havaintoja hyödyntäen pyrittiin löytämään tukea ja eroavaisuuksia teoriaosan muodostamaan viitekehykseen ja informaatioon. Empiirinen osuus tuki teoriaosassa esittämiä väittämiä hyvin, mutta myös muutamia uusia havaintoja esiintyi. Tutkimusongelmaan löydettiin monia vastauksia: digitaalipainatus luo arvoa yrityksen jakeluketjuun vähentämällä varastoja ja nopeuttamalla toimituksia. Jäätelöpakkausten markkinointi on aivan uuden haasteen edessä, koska mahdollisuudet kasvavat digitaalipainatuksen myötä huomattavasti. Kartongin valmistajalle arvo tulee parempien tuotteiden kautta, joista saa myös paremman tuoton. Digitaalipainatuksen arvoverkostossa tulee tapahtumaan muutoksia jatkossa, eri osapuolten roolit saattavat muuttua radikaalisti. Kuka hoitaa painatusta ja miten?

The Influence of Network Competence on Internationalization of SMEs

This study focuses on the relationship between organizational network competence and the internationalization process of small- and medium sized enterprises (SMEs). Over recent decades, the global business environment has become increasingly conducive to internationalization of small firms. A central facilitating factor in the process has been the emergence of networked business relationships between internationalizing firms. Research on SME internationalization has found that certain types of structures and dynamics of business networks allow SMEs access to the resources they need to enter foreign markets. This consequently means that their internationalization often becomes to depend on the networks they are embedded in. However, research so far has mostly ignored the possibility that the organizational ability to develop and manage business network relationships, network competence, may be a major underlying factor in determining how well SMEs can leverage their network relationships to enter foreign markets and consequently may determine in large part how successful their internationalization process turns out to be. This study aims to respond to those gaps, by empirically examining how the development of network competence in internationalizing SMEs influences the internationalization outcomes that they can expect, and how such network competence is conceptualized and developed. Using a mixed methods approach, survey data collected from 298 Finnish SMEs across five industry sectors is first used to examine how levels of network competence are related to internationalization propensity of SMEs and their subsequent international performance, growth and profitability as internationally operating firms. In order to illustrate in more detail the ways in which network competence is conceptualized and how it develops during the internationalization process of an SME, qualitative data from internationally operating Finnish SMEs are used. Longitudinal interview data of an internationalizing Finnish SME is accompanied by data gathered through a series of semistructured interviews of Finnish and Russian managers involved in mutual business relationship dyads. Structurally, this thesis examines the research issue as an article-based dissertation, consisting of five journal and conference publications. Three of these publications are based on the quantitative data, and the remaining two apply the qualitative interview data. The results find several aspects where network competence has a positive influence on the success of internationalizing SMEs, how it develops and what it entails conceptually in this context. Quantitatively, the level of network competence is found to have a positive relationship to various internationalization outcomes, including the propensity of SMEs to enter foreign markets and on their subsequent international performance, their growth and their profitability. Additionally, the positive relationship is divided between the relationship-specific and cross-relational dimension of network competence, in that the influence of the former is relevant for the propensity to internationalize, while the latter is for the growth and profitability of the already internationalized SMEs. Qualitatively, the results suggest, firstly, that the development process of network competence does not necessarily precede the start of the internationalization process, but may occur through a gradual learning process alongside it. And secondly, the results also imply that the conceptualization of network competence by Finnish managers of internationally operating Finnish SMEs is structurally distinct from that of their culturally distinct partner managers in Russia. This study contributes to the literature on SME internationalization in several ways. Firstly, it introduces operationalized organizational competencies to the literature on internationalization of SMEs, which has so far mainly examined the influence of business networking on the internationalization process without having such an organizational viewpoint. Furthermore, this study provides a multi-level analysis of the determinants of successful SME internationalization, by examining various strategic and performance outcomes across the process. These results also contribute to the literature on organizational strategy of internationalizing SMEs, by clarifying how different dimensions of business networking may be optimal in different phases of the internationalization process. Conceptually, the results of this study contribute to the literature on competence development and SME internationalization, by illustrating how the development process of network competence may occur during internationalization process. Thus, they also contribute to the discussion on how SMEs are able to influence the dynamics and structures of their business networks over time. Finally, this study contributes to the literature on the role of culture in the internationalization process, by implying that the cultural background of the manager of the SME may determine whether business networking and network competence is seen as an organizational-level or an individual level capability. The study also includes some additional contributions to the literature on dynamic capabilities in strategic management, and on that of strategic business networks. These include further clarifying the exact nature and tangibility of dynamic capabilities, and being one of the first studies to introduce constructs from both dynamic capabilities and business network literature to the field of international entrepreneurship. And finally, the study also has some contribution on the two streams of literature, in illustrating how both dyadic and network-level capabilities may be relevant, depending on the current strategic goals and market position of the firm. Keywords: network competence, internationalizatio

Embedded Service Bus for Internet of Things Interoperability

Internet of Things (IoT) technologies are developing rapidly, and therefore there exist several standards of interconnection protocols and platforms. The existence of heterogeneous protocols and platforms has become a critical challenge for IoT system developers. To mitigate this challenge, few alliances and organizations have taken the initiative to build a framework that helps to integrate application silos. Some of these frameworks focus only on a specific domain like home automation. However, the resource constraints in the large proportion of connected devices make it difficult to build an interoperable system using such frameworks. Therefore, a general purpose, lightweight interoperability framework that can be used for a range of devices is required. To tackle the heterogeneous nature, this work introduces an embedded, distributed and lightweight service bus, Lightweight IoT Service bus Architecture (LISA), which fits inside the network stack of a small real-time operating system for constrained nodes. LISA provides a uniform application programming interface for an IoT system on a range of devices with variable resource constraints. It hides platform and protocol variations underneath it, thus facilitating interoperability in IoT implementations. LISA is inspired by the Network on Terminal Architecture, a service centric open architecture by Nokia Research Center. Unlike many other interoperability frameworks, LISA is designed specifically for resource constrained nodes and it provides essential features of a service bus for easy service oriented architecture implementation. The presented architecture utilizes an intermediate computing layer, a Fog layer, between the small nodes and the cloud, thereby facilitating the federation of constrained nodes into subnetworks. As a result of a modular and distributed design, the part of LISA running in the Fog layer handles the heavy lifting to assist the lightweight portion of LISA inside the resource constrained nodes. Furthermore, LISA introduces a new networking paradigm, Node Centric Networking, to route messages across protocol boundaries to facilitate interoperability. This thesis presents a concept implementation of the architecture and creates a foundation for future extension towards a comprehensive interoperability framework for IoT.

An analytic knowledge network process for construction entrepreneurship education

Purpose - The purpose of this paper is to provide a quantitative multicriteria decision-making approach to knowledge management in construction entrepreneurship education by means of an analytic knowledge network process (KANP) Design/methodology/approach- The KANP approach in the study integrates a standard industrial classification with the analytic network process (ANP). For the construction entrepreneurship education, a decision-making model named KANP.CEEM is built to apply the KANP method in the evaluation of teaching cases to facilitate the case method, which is widely adopted in entrepreneurship education at business schools. Findings- The study finds that there are eight clusters and 178 nodes in the KANP.CEEM model, and experimental research on the evaluation of teaching cases discloses that the KANP method is effective in conducting knowledge management to the entrepreneurship education. Research limitations/implications- As an experimental research, this paper ignores the concordance between a selected standard classification and others, which perhaps limits the usefulness of KANP.CEEM model elsewhere. Practical implications- As the KANP.CEEM model is built based on the standard classification codes and the embedded ANP, it is thus expected that the model has a wide potential in evaluating knowledge-based teaching materials for any education purpose with a background from the construction industry, and can be used by both faculty and students. Originality/value- This paper fulfils a knowledge management need and offers a practical tool for an academic starting out on the development of knowledge-based teaching cases and other teaching materials or for a student going through the case studies and other learning materials.

Real-time context-aware network security policy enforcement system (RC-NSPES)

The major technical objectives of the RC-NSPES are to provide a framework for the concurrent operation of reactive and pro-active security functions to deliver efficient and optimised intrusion detection schemes as well as enhanced and highly correlated rule sets for more effective alerts management and root-cause analysis. The design and implementation of the RC-NSPES solution includes a number of innovative features in terms of real-time programmable embedded hardware (FPGA) deployment as well as in the integrated management station. These have been devised so as to deliver enhanced detection of attacks and contextualised alerts against threats that can arise from both the network layer and the application layer protocols. The resulting architecture represents an efficient and effective framework for the future deployment of network security systems.

Conceptualisation of an application of adaptive synthetic socioeconomic agents for intelligent network control

The deployment of Quality of Service (QoS) techniques involves careful analysis of area including: those business requirements; corporate strategy; and technical implementation process, which can lead to conflict or contradiction between those goals of various user groups involved in that policy definition. In addition long-term change management provides a challenge as these implementations typically require a high-skill set and experience level, which expose organisations to effects such as “hyperthymestria” [1] and “The Seven Sins of Memory”, defined by Schacter and discussed further within this paper. It is proposed that, given the information embedded within the packets of IP traffic, an opportunity exists to augment the traffic management with a machine-learning agent-based mechanism. This paper describes the process by which current policies are defined and that research required to support the development of an application which enables adaptive intelligent Quality of Service controls to augment or replace those policy-based mechanisms currently in use.

Road network and GPS tracking with data processing and quality assessment

GPS technology has been embedded into portable, low-cost electronic devices nowadays to track the movements of mobile objects. This implication has greatly impacted the transportation field by creating a novel and rich source of traffic data on the road network. Although the promise offered by GPS devices to overcome problems like underreporting, respondent fatigue, inaccuracies and other human errors in data collection is significant; the technology is still relatively new that it raises many issues for potential users. These issues tend to revolve around the following areas: reliability, data processing and the related application. This thesis aims to study the GPS tracking form the methodological, technical and practical aspects. It first evaluates the reliability of GPS based traffic data based on data from an experiment containing three different traffic modes (car, bike and bus) traveling along the road network. It then outline the general procedure for processing GPS tracking data and discuss related issues that are uncovered by using real-world GPS tracking data of 316 cars. Thirdly, it investigates the influence of road network density in finding optimal location for enhancing travel efficiency and decreasing travel cost. The results show that the geographical positioning is reliable. Velocity is slightly underestimated, whereas altitude measurements are unreliable.Post processing techniques with auxiliary information is found necessary and important when solving the inaccuracy of GPS data. The densities of the road network influence the finding of optimal locations. The influence will stabilize at a certain level and do not deteriorate when the node density is higher.

Observing the performance of distribution systems with embedded generators

In this paper, a multi-objective approach for observing the performance of distribution systems with embedded generators in the steady state, based on heuristic and power system analysis, is proposed. The proposed hybrid performance index describes the quality of the operating state in each considered distribution network configuration. In order to represent the system state, the loss allocation in the distribution systems, based on the Z-bus loss allocation method and compensation-based power flow algorithm, is determined. Also, an investigation of the impact of the integration of embedded generators on the overall performance of the distribution systems in the steady state, is performed. Results obtained from several case studies are presented and discussed. Copyright (C) 2004 John Wiley Sons, Ltd.

Investigation into the impact of embedded generators on distribution system performance using theorem of superposition

Since the 1980s, huge efforts have been made to utilise renewable energy sources to generate electric power. One of the interesting issues about embedded generators is the question of optimal placement and sizing of the embedded generators. This paper reports an investigation of impact of the integration of embedded generators on the overall performances of the distribution networks in the steady state, using theorem of superposition. Set of distribution system indices is proposed to observe performances of the distribution networks with embedded generators. Results obtained from the case study using IEEE test network are presented and discussed.

NCAP embedded using structured programming

This paper presents a network node embedded based on IEEE 1451 standard developed using structured programming to access the transducers in the WTIM. The NCAP was developed using Nios II processor and uClinux, a embedded operating system developed to features restricted hardware. Both hardware and software have dynamics features and they can be configured based in the application features. Based in this features, the NCAP was developed using the minimum components of hardware and software to that being implemented in remote environment like central point of data request. Many NCAP works are implemented with an object oriented structure. This is different from the surrounding implementations. In this project the NCAP was developed using structured programming. The tests of the NCAP were made using a ZigBee interface between NCAP and WTIM and the system demonstrated in areas of difficult access for long period of time due to need for low power consumption. © 2012 IEEE.

Development of an instrumentation system embedded on FPGA for real time measurement of mechanical vibrations in rotating machinery

The real-time monitoring of events in an industrial plant is vital, to monitor the actual conditions of operation of the machinery responsible for the manufacturing process. A predictive maintenance program includes condition monitoring of the rotating machinery, to anticipate possible conditions of failure. To increase the operational reliability it is thus necessary an efficient tool to analyze and monitor the equipments, in real-time, and enabling the detection of e.g. incipient faults in bearings. To fulfill these requirements some innovations have become frequent, namely the inclusion of vibration sensors or stator current sensors. These innovations enable the development of new design methodologies that take into account the ease of future modifications, upgrades, and replacement of the monitored machine, as well as expansion of the monitoring system. This paper presents the development, implementation and testing of an instrument for vibration monitoring, as a possible solution to embed in industrial environment. The digital control system is based on an FPGA, and its configuration with an open hardware design tool is described. Special focus is given to the area of fault detection in rolling bearings. © 2012 IEEE.

Tailoring the refractive index of Ge-S based glass for 3D embedded waveguides operating in the mid-IR region

The photosensitivity of GeSx binary glasses in response to irradiation to femtosecond pulses at 800 nm is investigated. Samples with three different molecular compositions were irradiated under different exposure conditions. The material response to laser exposure was characterized by both refractometry and micro-Raman spectroscopy. It is shown that the relative content of sulfur in the glass matrix influences the photo-induced refractive index modification. At low sulfur content, both positive and negative index changes can be obtained while at high sulfur content, only a positive index change can be reached. These changes were correlated with variations in the Raman response of exposed glass which were interpreted in terms of structural modifications of the glass network. Under optimized exposure conditions, waveguides with positive index changes of up to 7.8x10−3 and a controllable diameter from 14 to 25 μm can be obtained. Direct inscription of low insertion losses (IL = 3.1 – 3.9 dB) waveguides is demonstrated in a sample characterized by a S/Ge ratio of 4. The current results open a pathway towards the use of Ge-S binary glasses for the fabrication of integrated mid-infrared photonic components.

Design and Performance Evaluation of Network-on-Chip Communication Protocols and Architectures

The scale down of transistor technology allows microelectronics manufacturers such as Intel and IBM to build always more sophisticated systems on a single microchip. The classical interconnection solutions based on shared buses or direct connections between the modules of the chip are becoming obsolete as they struggle to sustain the increasing tight bandwidth and latency constraints that these systems demand. The most promising solution for the future chip interconnects are the Networks on Chip (NoC). NoCs are network composed by routers and channels used to inter- connect the different components installed on the single microchip. Examples of advanced processors based on NoC interconnects are the IBM Cell processor, composed by eight CPUs that is installed on the Sony Playstation III and the Intel Teraflops pro ject composed by 80 independent (simple) microprocessors. On chip integration is becoming popular not only in the Chip Multi Processor (CMP) research area but also in the wider and more heterogeneous world of Systems on Chip (SoC). SoC comprehend all the electronic devices that surround us such as cell-phones, smart-phones, house embedded systems, automotive systems, set-top boxes etc... SoC manufacturers such as ST Microelectronics , Samsung, Philips and also Universities such as Bologna University, M.I.T., Berkeley and more are all proposing proprietary frameworks based on NoC interconnects. These frameworks help engineers in the switch of design methodology and speed up the development of new NoC-based systems on chip. In this Thesis we propose an introduction of CMP and SoC interconnection networks. Then focusing on SoC systems we propose: • a detailed analysis based on simulation of the Spidergon NoC, a ST Microelectronics solution for SoC interconnects. The Spidergon NoC differs from many classical solutions inherited from the parallel computing world. Here we propose a detailed analysis of this NoC topology and routing algorithms. Furthermore we propose aEqualized a new routing algorithm designed to optimize the use of the resources of the network while also increasing its performance; • a methodology flow based on modified publicly available tools that combined can be used to design, model and analyze any kind of System on Chip; • a detailed analysis of a ST Microelectronics-proprietary transport-level protocol that the author of this Thesis helped developing; • a simulation-based comprehensive comparison of different network interface designs proposed by the author and the researchers at AST lab, in order to integrate shared-memory and message-passing based components on a single System on Chip; • a powerful and flexible solution to address the time closure exception issue in the design of synchronous Networks on Chip. Our solution is based on relay stations repeaters and allows to reduce the power and area demands of NoC interconnects while also reducing its buffer needs; • a solution to simplify the design of the NoC by also increasing their performance and reducing their power and area consumption. We propose to replace complex and slow virtual channel-based routers with multiple and flexible small Multi Plane ones. This solution allows us to reduce the area and power dissipation of any NoC while also increasing its performance especially when the resources are reduced. This Thesis has been written in collaboration with the Advanced System Technology laboratory in Grenoble France, and the Computer Science Department at Columbia University in the city of New York.

Middleware per Internet of Things: Java Embedded come caso di studio

Grazie al progresso dell'elettronica, ai giorni nostri, è possibile costruire dispositivi elettronici molto piccoli, che col passare del tempo lo sono sempre più. Questo ci permette di poter imboccare nuove strade nel mondo dell'informatica, sfruttando proprio questo fatto. Le dimensioni ridotte dei dispositivi in commercio, come sensori, attuatori, tag e tanto altro, sono particolarmente adatte a nuovi scenari applicativi. Internet of Things è una visione in cui Internet viene esteso alle cose. Facendo largo uso di dispositivi come sensori e tag è possibile realizzare sistemi intelligenti che possono avere riscontri positivi nella vita di tutti i giorni. Tracciare la posizione degli oggetti, monitorare pazienti da remoto, rilevare dati sull'ambiente per realizzare sistemi automatici (ad esempio regolare automaticamente la luce o la temperatura di una stanza) sono solo alcuni esempi. Internet of Things è la naturale evoluzione di Internet, ed è destinato a cambiare radicalmente la nostra vita futura, poichè la tecnologia sarà sempre più parte integrante della nostra vita, aumentando sempre più il nostro benessere e riducendo sempre più il numero delle azioni quotidiane da compiere. Sempre più sono middleware, le piattaforme e i sistemi operativi che nascono per cercare di eliminare o ridurre le problematiche relative allo sviluppo di sistemi di questo genere, e lo scopo di questa tesi è proprio sottolinearne l'importanza e di analizzare gli aspetti che questi middleware devono affrontare. La tesi è strutturata in questo modo: nel capitolo uno verrà fatta una introduzione a Internet of Things, analizzando alcuni degli innumerevoli scenari applicativi che ne derivano, insieme però alle inevitabili problematiche di tipo tecnologico e sociale. Nel secondo capitolo verranno illustrate le tecnologie abilitanti di Internet of Things, grazie alle quali è possibile realizzare sistemi intelligenti. Nel terzo capitolo verranno analizzati gli aspetti relativi ai middleware, sottolineandone l'importanza e prestando attenzione alle funzioni che devono svolgere, il tutto riportando anche degli esempi di middleware esistenti. Nel quarto capitolo verrà approfondito il middleware Java Embedded di Oracle.