Relação entre poluição do ar e internações hospitalares por doenças respiratórias e cardiovascular em uma cidade do interior do Estado de São Paulo

Pós-graduação em Fisioterapia - FCT

Fermentation medium and oxygen transfer conditions that maximize the xylose conversion to ethanol by Pichia stipitis

The xylose conversion to ethanol by Pichia stipitis was studied. In a first step, the necessity of supplementing the fermentation medium with urea. MgSO(4) x 7H(2)O, and/or yeast extract was evaluated through a 2(3) full factorial design. The simultaneous addition of these three nutritional sources to the fermentation medium, in concentrations of 2.3, 1.0, and 3.0 g/l, respectively, showed to be important to improve the ethanol production in detriment of the substrate conversion to cell. In a second stage, fermentation assays performed in a bioreactor under different K(L)a (volumetric oxygen transfer coefficient) conditions made possible understanding the influence of the oxygen transfer on yeast performance, as well as to define the most suitable range of values for an efficient ethanol production. The most promising region to perform this bioconversion process was found to be between 2.3 and 4.9 h(-1), since it promoted the highest ethanol production results with practically exhaustion of the xylose from the medium. These findings contribute for the development of an economical and efficient technology for large scale production of second generation ethanol. (C) 2011 Elsevier Ltd. All rights reserved.

Cross-Nativity Marriages, Gender, and Human Capital Levels of Children

Because the demographic composition of todays immigrants to the US differs so much from those of natives, immigrants may be less likely to socially integrate into U.S. society, and specically less likely to marry natives. This paper explores the relationship between immigrants' marriage patterns and the academic outcomes of their children. Using 2000 Census data, it is found that while marital decisions of foreign born females do not affect their children's academic success, foreign born males that marry foreign born females are less likely to have children that are high school dropouts. These relationships remain after using various methods to control for the endogeneity of the intermarriage decision. Although we cannot disentangle whether the benefits of same-nativity marriages for foreign born males arise from a more efficient technology in human capital production within the household or from increased participation in ethnic networks, it does appear that immigrant males have better educated children when they marry immigrant females.

El papel de la hidroelectricidad en el contexto de las energías renovables en España

En el artículo se discute el papel de la energía hidroeléctrica en el marco del sistema eléctrico español, donde existe una elevada penetración de energías no gestionables con una tendencia clara a aumentar en los próximos años. El desarrollo de nuevas centrales hidroeléctricas se basará probablemente en centrales reversibles. La energía hidroeléctrica es una tecnología madura y eficiente para el almacenamiento de energía a gran escala y contribuye por tanto de manera decisiva a la integración de fuentes renovables no gestionables. Los beneficios obtenidos con la operación punta-valle pueden ser insuficientes para compensar el coste de una nueva central. Sin embargo, los ingresos obtenidos pueden incrementarse sustancialmente mediante su participación en los servicios de ajuste del sistema. Ello requeriría un diseño apropiado del mercado eléctrico. La contribución de las centrales hidráulicas reversibles al balance producción-consumo puede extenderse a las horas valle utilizando, bien bombeo en velocidad variable o bien una configuración de cortocircuito hidráulico. La necesidad de mitigar los efectos hidrológicos aguas abajo de las centrales hidroeléctricas puede introducir algunas restricciones en la operación que limitaría de algún modo los servicios descritos más arriba. Sin embargo, cabe esperar que los efectos ambientales provocados por las centrales hidráulicas reversibles sean significativamente menores. In this paper the role of hydropower in electric power systems is discussed, in the framework of the Spanish system, where a high penetration of intermittent power sources exists, showing a clear trend to increase in next years. The development of new hydro power facilities will be likely based on pumped storage hydro power plants. Hydropower is a mature and efficient technology for large-scale energy storage and therefore represents a key contribution for the integration of intermittent power sources, such as wind or photovoltaic. The benefits obtained from load shifting may be insufficient to compensate the costs of a new plant. However, the obtained revenues can significantly increase through its contribution to providing ancillary services. This would require an appropriate design of the electricity market. The contribution of pumped storage hydro power plants to balancing services can be extended to off-peak hours, using either variable speed pumping or the hydraulic shortcircuit configuration. The need to mitigate hydrological effects downstream of hydro plants may introduce some operational constraints which could limit to some extent the services described above. However environmental effects caused by pumped storage hydro power plants are expected to be significantly smaller.

Evaluación de tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido)

En Cuba, las arvenses que afectan al cultivo de la caña de azúcar son una de las causas fundamentales de los bajos rendimientos agrícolas y su control constituye unas de las principales partidas de gastos. En general, se aplican los herbicidas, así como otros métodos de control, sin tener en cuenta el tipo de suelo y las características de estas plantas. Sobre el manejo de arvenses no existen trabajos de investigación que aborden aspectos de eficiencia energética de las producciones y daños al ambiente. Por lo antes señalado, el objetivo de esta investigación fue evaluar diversas tecnologías de manejo de arvenses en el cultivo de la caña de azúcar (Saccharum spp. híbrido), en cepas de primavera y retoño, en tres tipos de suelos, con el propósito de obtener producciones sustentables. El área de estudio se localizó en los campos de la Empresa Azucarera del municipio “Majibacoa”, provincia de Las Tunas (oriente de Cuba), que posee condiciones edafoclimáticas que abundan a lo largo del país. Los tres tipos de suelos más representativos son Fersialítico Pardo Rojizo ócrico, Pardo Mullido y Vertisol Crómico gléyco. En dicha área se han identificado 31 especies de arvenses, 16 de la clase Liliopsida y 15 de la Magnoliopsida. En un primer grupo de experimentos, se desarrollaron nueve ensayos de campo para evaluar la efectividad de herbicidas y mezclas de estos en el manejo de arvenses en el cultivo de la caña de azúcar, tanto en cepas de primavera como de retoño, en los tres tipos de suelos. Se establecieron parcelas de 80 m2 distribuidas en bloques al azar con cuatro réplicas. La efectividad se evaluó por medio del porcentaje de cobertura por arvenses y la fitotoxicidad provocada a las plantas de caña, teniendo en cuenta el coste asociado a cada tratamiento. En aplicaciones preemergentes en caña planta de primavera, el herbicida más eficiente fue el Isoxaflutole con dosis de 0,15; 0,20 y 0,25 kg.ha-1 de producto comercial (pc) en los suelos Fersialítico, Pardo y Vertisol respectivamente. En aplicaciones postemergentes tempranas la mezcla más eficiente fue la de Isoxaflutole + Ametrina +2,4-D con las dosis de Isoxaflutole citadas anteriormente. En aplicaciones preemergentes en cepa de retoño, el herbicida más eficiente fue el Isoxaflutole a dosis de 0,20 kg.ha-1 pc para el suelo Fersialítico y a 0,25 kg.ha-1 pc para los suelos Pardo y Vertisol. En un segundo grupo, se realizaron seis ensayos de campo distribuidos en dos fases. En la primera fase, se desarrollaron tres experimentos, uno por cada tipo de suelo, para evaluar la eficiencia de nueve tecnologías de manejo de arvenses (químicas y físicas combinadas) en cepa de primavera de caña de azúcar. En la siguiente fase, los tres ensayos restantes (uno por tipo de suelo) evaluaron tecnologías de manejo de arvenses durante dos ciclos de producción de caña de azúcar (etapa de primavera y retoño). En la etapa de primavera se aplicó la tecnología más eficiente de los tres experimentos anteriores y durante la etapa de retoño se evaluaron otras nueve tecnologías propias de este tipo de cepa. En estos experimentos los diferentes tratamientos se aplicaron en franjas distribuidas al azar con cuatro réplicas. En las tecnologías evaluadas se emplearon los herbicidas y mezclas que resultaron más eficientes en el primer grupo de experimentos. En cada caso, se evaluaron la eficiencia energética de la producción de azúcar y otros derivados, la resistencia a la penetración de los suelos, la carga contaminante hacia la atmósfera producto de la combustión del diésel y los beneficios al aplicar las diferentes tecnologías. En la primera fase (cepa de primavera), la tecnología con mejor resultado fue la aplicación preemergente de Isoxaflutole inmediatamente después de la plantación, seguida de descepe químico con Glufosinato de amonio, más labor con grada múltiple aproximadamente a los 80 días de la plantación y aplicación pre-cierre con Glufosinato de amonio. En la segunda fase (dos ciclos del cultivo), el mejor resultado se obtuvo cuando en la etapa de retoño se realizó una aplicación preemergente de Isoxaflutole, descepe químico con Glufosinato de amonio y aplicación pre-cierre con este mismo herbicida. En los tres tipos de suelos durante los dos ciclos, la eficiencia energética tuvo valores de 7,2 - 7,5, la resistencia a la penetración 1,2 - 1,5 MPa, la carga contaminante hacia la atmósfera fue de 63,3 - 64,9 kg.t-1 de caña cosechada y beneficios de 8.324 - 8.455 pesos cubanos por hectárea. Este estudio demuestra que un control eficiente de las arvenses debe tener en cuenta necesariamente el tipo de suelo. Así, en los Vertisoles, con mayor contenido en arcilla, se requieren mayores dosis de Isoxaflutole y la eficiencia energética de la producción es menor. La persistencia de ciertas arvenses, especialmente de la clase Liliopsida, requiere de un manejo integrado que incluya diferentes tipos de herbicidas. ABSTRACT In Cuba, weeds affecting the sugarcane are one of the main causes of low agricultural yields, and their control constitutes some of the main items of expenditure. In general, herbicides are applied, as well as other control methods, without keeping in mind the soil type and the characteristics of these plants. Moreover, weed control research approaching aspects about energy efficiency of the crop production, and environmental damages are missing. Hence, the objective of this investigation was to evaluate diverse technologies of weed handling in sugarcane (Saccharum spp. hybrid), both in spring cane plant and ratoon, in three types of soils, with the purpose of obtaining sustainable productions. The study area was located in the fields of the Sugar Enterprise of the Municipality "Majibacoa”, Las Tunas province (east of Cuba) that possesses ecological conditions that are plentiful along the country. The three more representative types of soils are Fersialitic, Brown, and Vertisol. In this area 31 weeds species have been identified, 16 of the Class Liliopsida and 15 of the Magnoliopsida. In a first group of experiments, nine field rehearsals were developed to evaluate the effectiveness of herbicides and mixtures of these for weed handling in sugarcane, in spring cane plants as well as in ratoon, in the three types of soils. Plots of 80 m-2 were distributed at random blocks with four replications. The effectiveness was evaluated by means of the covering percentage by weeds and the provoked toxicity to the cane plants, keeping in mind the cost associated to each treatment. In preemergence applications in spring cane plant, the most efficient herbicide was the Isoxaflutole with dose of 0.15; 0.20 and 0.25 kg.ha-1 of commercial product (pc) in the soils Fersialítico, Brown and Vertisol respectively. In early postemergence applications the most efficient mixture was that of Isoxaflutole + Ametrina + 2,4-D with the doses of Isoxaflutole mentioned previously. In preemergence applications in ratoon, the most efficient herbicide was the Isoxaflutole at dose of 0.20 kg.ha-1 pc for the soil Fersialític and to 0.25 kg. ha-1 pc for the Brown soil and Vertisol. In a second group, six field rehearsals distributed in two phases were carried out. In the first phase, three experiments were developed, one for each soil type, to evaluate the efficiency of nine technologies of weed handling in spring cane plant. In the following phase, the three remaining rehearsals (one for each soil type) diverse technologies of weed handling were evaluated during two cycles of sugarcane production (spring stage and ratoon). In the spring stage the most efficient technology in the three previous experiments was applied and during ratoon stage other nine technologies were evaluated. In these experiments the different treatments were applied in fringes distributed at random with four replicas. In the evaluated technologies the herbicides and mixtures were used selecting those that were more efficient in the first group of experiments. In each case, the energy efficiency of the sugar production and other derivatives, the soil penetration resistance, the polluting load toward the atmosphere product of the combustion, and the benefits when applying the different technologies were all evaluated. In the first phase (spring cane plant), the technology with better result was the preemergence application of Isoxaflutole immediately after the plantation, followed by chemical eradication with Ammonia Glufosinate, hoeing work with multiple tier approximately to the 80 days of the plantation and pre-closing application with Ammonia Glufosinate. In the second phase (two cycles of the cultivation), the best result was obtained when a preemergence application of Isoxaflutole was carried out in sprout's stage, chemical eradication with Ammonia Glufosinate and pre-closing application with this same herbicide. In the three types of soils during the two cycles, the energy efficiency achieved values of 7.2 to 7.5, the resistance to the penetration 1.2 - 1.5 MPa, the polluting load toward the atmosphere was of 63.3 - 64.9 kg.t-1 of the harvested cane and the obtained benefits of 8,324 - 8,455 Cuban pesos per hectare. This study demonstrates that an efficient control of the weeds should necessarily keep in mind the soil type. This way, in the Vertisols, with more clay content, bigger dose of Isoxaflutole is required and the energy efficiency of the production is smaller. The persistence of certain weeds, especially of the class Liliopsida, requires of an integrated handling him to include different types of herbicides.

Estudio de la movilidad que presenta el diésel en un suelo contaminado empleando surfactantes

La contaminación de suelos con hidrocarburos de petróleo en México es un problema que se ha vuelto muy común en nuestros días, debido principalmente a derrames, así como a las actividades propias de la industria petrolera. Algunos suelos contaminados, principalmente en el sureste de México, contienen concentraciones de hidrocarburos hasta de 450,000 mg/kg. Por dichas razones, una de las preocupaciones de las autoridades ambientales es el desarrollo de tecnologías eficientes y económicamente factibles que permitan la eliminación de este tipo de contaminantes. El saneamiento del sitio se puede lograr a través de diversos procedimientos, como son la aplicación de métodos físicos, químicos y biológicos (o combinaciones de ellas). La elección de un método depende de la naturaleza del contaminante, su estado físico, concentración, tipo de suelo, espacio físico disponible, tiempo destinado para su tratamiento, así como de los recursos económicos disponibles. Previa a la aplicación de la tecnología es necesario la realización de un diagnóstico de la contaminación del suelo, con el fin de conocer el tipo, concentración y distribución de los contaminantes presentes, así como el volumen de suelo a tratar, las condiciones climáticas de la zona, y características físicas del lugar (vías de acceso y servicios, entre otros). En la presente tesis, el empleo de surfactantes, se ha propuesto como una técnica para incrementar la movilidad de contaminantes orgánicos hidrofóbicos (HOCs) como hidrocarburos totales del petróleo (HTPs), bifenilos policlorados (PCBs), Benceno, Tolueno, Xilenos, explosivos, clorofenoles, pesticidas, entre otros, y así facilitar su degradación. Los surfactantes debido a que reducen la tensión superficial del agua, son moléculas formadas por grupos polares hidrofílicos y largas cadenas carbonadas hidrofóbicas. Sus grupos polares forman puentes hidrógeno con las moléculas de agua, mientras que las cadenas carbonadas se asocian a los hidrocarburos debido a interacciones hidrofóbicas que estos presentan. En soluciones acuosas, los surfactantes forman estructuras esféricas organizadas llamadas micelas. La solubilización de los contaminantes se lleva a cabo solamente cuando se forma la fase micelar, la cual se obtiene cuando la concentración del surfactante es superior a la concentración micelar crítica (CMC), es decir, arriba de la concentración de la cual el monómero se comienza a auto-agregar. La eficiencia de desorción de diésel por un surfactante depende de su naturaleza, de la dosis empleada, de la hidrofobicidad del contaminante, de la interacción surfactante-suelo y del tiempo de contacto surfactante-suelo. Sin embargo, la mejor eficiencia de desorción no está siempre relacionada con la mejor eficiencia de movilidad o solubilidad, debido principalmente a que el empleo de una alta concentración de surfactante puede inhibir la movilización. De acuerdo con información proporcionada por la Procuraduría Federal de Protección al Ambiente (PROFEPA), a la fecha no se ha llevado a cabo en México ninguna restauración de sitios específicamente contaminados con diésel, la técnica de lavado de suelos. Por lo anterior existe la necesidad de emplear la técnica de lavado de suelos ex situ. Específicamente en el suelo extraído de la ex refinería 18 de marzo ubicada en el Distrito Federal México y empleando una solución de surfactantes con agua desionizada, la cual consiste ponerlos en contacto con el suelo contaminado con diésel por medio de columnas de lavado cilíndricas, para lograr la remoción del contaminante. Se emplearon como surfactantes el lauril sulfato de sodio, lauril éter sulfato de sodio y Glucopon AV-100 a diferentes concentraciones de 0.5 a 4.0 [g/L], lográndose obtener una eficiencia del 80 % con este último surfactante. El lavado de suelos contaminados con diésel empleado surfactantes, es una tecnología que requiere que se profundice en el estudio de algunas variables como son el tipo de surfactante, concentración, tiempo de lavado, fenómenos de difusión, desorción, propiedades termodinámicas, entre otros. Los cuales determinarán el éxito o fracaso de la técnica empleada. Nowadays, soil pollution with oil in Mexico is a very common issue due mainly to both oil spill and oil activities. For example, mainly in the southeast area of Mexico, polluted soil contains high concentrations of hydrocarbons, up to 450,000 mg/kg. For these reasons, enviromental authorities have the concern in developing economically feasible and efficient technology that allow the elimination of these type of contaminants. The sanitation in sites can be achieved through several procedures such as physical, chemical and biological methods (or a combination among them). The choice of a method depends on the nature and physical state of the contaminant, the concentration, type of soil, physical space available, time consumption and financial resources. Before any technological application, a diagnostic of the polluted soil is necessary in order to know the type, concentration and distribution of contaminants as well as the soil volume, climatic conditions and physical features of the place (access routes and services, among others). In this thesis, surfactants has been proposed as a technique to increase the mobility of hydrophobic-organic contaminants (HOCs), e.g. total hydrocarbons of petroleum, polychlorinated biphenyls, benzene, toluene, xylenes, explosives, chlorophenols, pesticides, among others, and, hence, to facilitate degradation. Since surfactants reduce the water surface tension, they are molecules comprised of hydrophilic polar groups and long-hydrophobic carbon chains. Surfactant’s polar groups form hydrogen bonding with water molecules while carbon chains, i.e. hydrocarbon chains, have hydrophobic interactios. In aqueous solutions, surfactants form self-organised spherical structures called micelles. The solubilisation of contaminants is carried out only when the micellar phase is formed. This is obtained when the surfactant concentration is higher than the crítical micelle concentration (CMC), i.e. above the concentration where the surfactant monomer begins to self-aggregate. The diesel efficiency desorption by surfactants depends on their nature, the dose use, the contaminant hydrophobicity, the surfactant-soil interaction and the contact time with surfactant soil. However, the best desorption is not always related with the best either mobility or solubility efficiency since high concentration of surfactant can inhibit mobilisation. According to information of the Federal Bureau of Environmental Protection (PROFEPA), up today, there is not any restauration of diesel-polluted sites using the washing-soil technique. Due to the above, there exist the necessity of employing the waching-soil technique ex situ. More specifically, a sample soil from the oil-refinery of “18 de marzo” in Mexico city was extracted and a surfactant solution with deionised water was put in contact with the diesel contaminated soil by means of cylindrical waching columns in order to remove the contaminant. The surfactants employed in this work were sodium lauryl sulfate, sodium lauryl ether sulfate and Glucopon AV-100 at different concentrations of 0.5 to 4 [g/L], obtaining a efficiency of 80 % with this last surfactant. The washing of diesel-polluted soil using surfactants is a technology which requires a deeper study of some variables such as the type of surfactant, concentration, washing time, difusión phenomena, desorption, thermodynamic properties, among others. These parameters determine the succes or failure of the employed technique.

An Area-Efficient Noise-Adaptive Neural Amplifier in 130 nm CMOS Technology

Chronic recording of neural signals is indispensable in designing efficient brain–machine interfaces and to elucidate human neurophysiology. The advent of multichannel micro-electrode arrays has driven the need for electronics to record neural signals from many neurons. The dynamic range of the system can vary over time due to change in electrode–neuron distance and background noise. We propose a neural amplifier in UMC 130 nm, 1P8M complementary metal–oxide–semiconductor (CMOS) technology. It can be biased adaptively from 200 nA to 2 $mu{rm A}$, modulating input referred noise from 9.92 $mu{rm V}$ to 3.9 $mu{rm V}$. We also describe a low noise design technique which minimizes the noise contribution of the load circuitry. Optimum sizing of the input transistors minimizes the accentuation of the input referred noise of the amplifier and obviates the need of large input capacitance. The amplifier achieves a noise efficiency factor of 2.58. The amplifier can pass signal from 5 Hz to 7 kHz and the bandwidth of the amplifier can be tuned for rejecting low field potentials (LFP) and power line interference. The amplifier achieves a mid-band voltage gain of 37 dB. In vitro experiments are performed to validate the applicability of the neural low noise amplifier in neural recording systems.

ReedCob – An eco-efficient building technology for monolithic walls based on earth and reeds

4th Conference COST ACTION FP1303 – Designing with Bio-based Materials – Challenges and opportiunities. INIA – CSIC, Madrid, 24-25 February 2016. Book of abstracts, T.Troya, J.Galván, D.Jones (Eds.), INIA and IETcc – CSIS, pg. 79-80 (ISBN: 978-91-88349-16-3)

Yttrium oxysulfide nanosized spherical particles doped with Yb and Er or Yb and Tm: efficient materials for up-converting phosphor technology field

This work reports on the preparation, structural and luminescent studies of nanosized up-converter phosphors Y2O2S:Yb(4%), Er(0.1%) and Y2O2S:Yb(4%), Tm(0.1%),both from polymeric and basic carbonate precursors. The precursors were submitted to a sulphuration process that was previously developed for oxysulfide preparation from basic carbonate. From XRD data, all phosphors presented the oxysulfide phase and the mean crystallite size estimated from the Scherrer formula in the range of 15-20 nm. Polymeric precursor leads to the smallest crystallite size independent on the doping ion. SEM and TEM results confirmed that basic carbonate leads to spherical particles with narrow size distribution and mean diameter of 150 nm, and polymeric precursor smaller spherical particles with diameter between 20 and 40 nm. Up-conversion studies under 980 nm laser excitation showed that Er-doped phosphors present strong green emission related to H-2(11/2), S-4(3/2) --> I-4(15/2) Er transitions as well as the red ones, F-4(9/2) --> I-4(15/2). Tm-doped samples show strong blue emission assigned to (1)G(4) --> H-3(6) and also the red ones, related to (1)G(4) --> F-3(4). Therefore, the sulphuration method was successfully applied to prepare nanosized and nanostructured blue and green up-converter oxysulfide phosphors starting from basic carbonate and polymeric precursors. (C) 2003 Elsevier B.V. All rights reserved.

The human side of social technology for climate change mitigation and human development: the case of "efficient stoves" in Brazil

Carbon management has gradually gained attention within the overall environmental management and corporate social responsibility agendas. The clean development mechanism, from Kyoto Protocol, was envisioned as connecting carbon market and sustainable development objectives in developing countries. Previous research has shown that this potential is rarely being achieved. The paper explores how the incorporation of the human side into carbon management reinforces its contribution to generate human development in local communities and to improve the company's image. A case study of a Brazilian company is presented, with the results of the application of an analytical model that incorporates the human side and human development. The selected project is an "efficient stoves" programme. "Efficient stoves" are recognised in Brazil as social technologies. Results suggest that the fact that social technologies value the human side of the technology plays a key role when it comes to analysing the co-benefits of the project implementation.

Inducing the development and adoption of socially efficient automotive technology. Final report.

Transportation Systems Center, Cambridge, Mass.

Efficient allocation of research funds : economic evaluation methods with case studies in building technology /

"December 1979."

Discovery and efficient reuse of technology pictures using Wikimedia infrastructures. A proposal

Multimedia objects, especially images and figures, are essential for the visualization and interpretation of research findings. The distribution and reuse of these scientific objects is significantly improved under open access conditions, for instance in Wikipedia articles, in research literature, as well as in education and knowledge dissemination, where licensing of images often represents a serious barrier. Whereas scientific publications are retrievable through library portals or other online search services due to standardized indices there is no targeted retrieval and access to the accompanying images and figures yet. Consequently there is a great demand to develop standardized indexing methods for these multimedia open access objects in order to improve the accessibility to this material. With our proposal, we hope to serve a broad audience which looks up a scientific or technical term in a web search portal first. Until now, this audience has little chance to find an openly accessible and reusable image narrowly matching their search term on first try - frustratingly so, even if there is in fact such an image included in some open access article.