Sviluppo, implementazione e valutazione funzionale di un nuovo modello protesico di caviglia

Total ankle arthroplasty (TAA) is still not as satisfactory as total hip and total knee arthroplasty. For the TAA to be considered a valuable alternative to ankle arthrodesis, an effective range of ankle mobility must be recovered. The disappointing clinical results of the current generation of TAA are mostly related to poor understanding of the structures guiding ankle joint mobility. A new design (BOX Ankle) has been developed, uniquely able to restore physiologic ankle mobility and a natural relationship between the implanted components and the retained ligaments. For the first time the shapes of the tibial and talar components in the sagittal plane were designed to be compatible with the demonstrated ligament isometric rotation. This resulted in an unique motion at the replaced ankle where natural sliding as well as rolling motion occurs while at the same time full conformity is maintained between the three components throughout the flexion arc. According to prior research, the design features a spherical convex tibial component, a talar component with radius of curvature in the sagittal plane longer than that of the natural talus, and a fully conforming meniscal component. After computer-based modelling and preliminary observations in several trial implantation in specimens, 126 patients were implanted in the period July 2003 – December 2008. 75 patients with at least 6 months follow-up are here reported. Mean age was 62,6 years (range 22 – 80), mean follow-up 20,2 months. The AOFAS clinical score systems were used to assess patient outcome. Radiographs at maximal dorsiflexion and maximal plantar flexion confirmed the meniscalbearing component moves anteriorly during dorsiflexion and posteriorly during plantarflexion. Frontal and lateral radiographs in the patients, show good alignment of the components, and no signs of radiolucency or loosening. The mean AOFAS score was observed to go from 41 pre-op to 74,6 at 6 month follow-up, with further improvement at the following follow-up. These early results reveal satisfactory clinical scores, with good recovery of range of motion and reduction of pain. Radiographic assessment reveals good osteointegration. All these preliminary results confirm biomechanical studies and the validity of this novel ligamentcompatible prosthesis design. Surely it will be important to re-evaluate these patients later.

Criterios para el dimensionamiento de redes de riego robustas frente a cambios en la alternativa de cultivos

En los años 50 y 60 del siglo XX se produjo en Europa un cambio en la concepción de los sistemas de riego, en los cuales se pasó del regadío por superficie al presurizado y con ello del riego por turnos al riego a la demanda. Las ventajas de este nuevo sistema de riego dieron lugar a una gran expansión de las redes colectivas de riego a presión, especialmente en los países del arco mediterráneo y del Sur de Europa (Francia, España, Italia, Portugal y Grecia). Desde entonces el riego presurizado a la demanda ha tenido una evolución permanente, en la que han mejorado los equipos y las técnicas de aplicación del riego, siempre con una clara orientación hacía el incremento de la productividad. Esta evolución unida a los vaivenes de los mercados, al abaratamiento de los transportes y la globalización, y a las subvenciones agrícolas, ha propiciado que las alternativas de cultivos previstas hayan sufrido cambios. El cambio de la alternativa de cultivos hacia otros más exigentes desde el punto de vista de las necesidades hídricas tiene como consecuencia el aumento de los consumos, circunstancia para cual debe estar capacitada la red. Otros fenómenos como el cambio climático, de amplio interés a día de hoy, presentan algunos escenarios en lo que se prevé un incremento de las temperaturas que unido a una reducción en las precipitaciones, supondría también que se elevarían las necesidades de riego de los cultivos. Todas estas circunstancias deben ser contempladas en la redacción de los proyectos de transformación de nuevas zonas regables y en los de modernización de las existentes. Las redes de riego deben estar dimensionadas para poder atender dichos incrementos de consumo. La fortaleza de la red para atender variaciones en las demandas de agua se convierte por tanto en una premisa del proyecto. Dicha fortaleza se puede conseguir de formas diferentes y a costos distintos, puesto que en el proceso de dimensionamiento estadístico de los caudales circulantes en punta de campaña intervienen muchas variables y parámetros de riego. En la presente tesis doctoral se analiza en detalle el estado del arte en la materia, se efectúa un análisis de la función específica y la influencia en el cálculo de cada uno de los parámetros, se establece un procedimiento de actuación que optimice el dimensionamiento de la red colectiva para que ésta disponga de la robustez necesaria para hacer frente a incrementos potenciales de consumo de agua sobre la previsiones de base del proyecto y se establecen los criterios, rangos y combinaciones de parámetros que permiten dotar a la red de la fortaleza necesaria de la manera más eficiente posible. During the 1950s and 1960s the design of irrigation systems in Europe underwent change. Traditional surface irrigation was replaced by pressure irrigation, with the delivery method shifting from a scheduled type to an on-demand one. The advantages obtained with this new system led to a significant development of on-demand pressurised irrigation districts, especially in the Southern countries (France, Greece, Italy, Portugal and Spain). On-demand pressurised irrigation has since evolved in a continuous manner in which, with the purpose of gaining productivity, on-farm equipment and automation instruments have seen improvements. Such developments, along with market fluctuations, reductions in transport costs, globalisation and the influence of agricultural subsidies, have resulted in changes in the crop pattern. The farming of new crops may require more water and the consumption may become greater. In addition to this, other phenomena, such as the frequently-debated effects of climate change, reveal scenarios in which an increase in temperatures and the accompanying reductions in rainfall are expected. One consequence of this would be an increase in irrigation requirements and subsequent impact on irrigation networks. All such circumstances should be taken into account in both the design of new irrigation districts and the upgrading of the existing ones. Irrigation networks should be of a size that allows them to meet increases in consumption. The robustness of the network, defined as its capacity to absorb increments in water requirements, becomes a key point to be taken into account in the design phase. Given that there are several parameters that influence the calculus of design flows, such robustness may be obtained in different ways and at varying costs. In the context of this, the thesis reviews the state of the art, analyses the role and influence of each parameter, establishes a procedure for checking the design and robustness of on-demand irrigation networks, and sets design criteria for selecting the most effective range and combination of parameters that provide the network with such robustness.

Quantitative assessment of enzyme specificity in vivo: P2 recognition by Kex2 protease defined in a genetic system

The specificity of the yeast proprotein-processing Kex2 protease was examined in vivo by using a sensitive, quantitative assay. A truncated prepro-α-factor gene encoding an α-factor precursor with a single α-factor repeat was constructed with restriction sites for cassette mutagenesis flanking the single Kex2 cleavage site (-SLDKR↓EAEA-). All of the 19 substitutions for the Lys (P2) residue in the cleavage site were made. The wild-type and mutant precursors were expressed in a yeast strain lacking the chromosomal genes encoding Kex2 and prepro-α-factor. Cleavage of the 20 sites by Kex2, expressed at the wild-type level, was assessed by using a quantitative-mating assay with an effective range greater than six orders of magnitude. All substitutions for Lys at P2 decreased mating, from 2-fold for Arg to >106-fold for Trp. Eviction of the Kex2-encoding plasmid indicated that cleavage of mutant sites by other cellular proteases was not a complicating factor. Mating efficiencies of strains expressing the mutant precursors correlated well with the specificity (kcat/KM) of purified Kex2 for comparable model peptide substrates, validating the in vivo approach as a quantitative method. The results support the conclusion that KM, which is heavily influenced by the nature of the P2 residue, is a major determinant of cleavage efficiency in vivo. P2 preference followed the rank order: Lys > Arg > Thr > Pro > Glu > Ile > Ser > Ala > Asn > Val > Cys > AsP > Gln > Gly > His > Met > Leu > Tyr > Phe > Trp.

Adaptation is not required to explain the long-term response of axons to molecular gradients

It has been suggested that growth cones navigating through the developing nervous system might display adaptation, so that their response to gradient signals is conserved over wide variations in ligand concentration. Recently however, a new chemotaxis assay that allows the effect of gradient parameters on axonal trajectories to be finely varied has revealed a decline in gradient sensitivity on either side of an optimal concentration. We show that this behavior can be quantitatively reproduced with a computational model of axonal chemotaxis that does not employ explicit adaptation. Two crucial components of this model required to reproduce the observed sensitivity are spatial and temporal averaging. These can be interpreted as corresponding, respectively, to the spatial spread of signaling effects downstream from receptor binding, and to the finite time over which these signaling effects decay. For spatial averaging, the model predicts that an effective range of roughly one-third of the extent of the growth cone is optimal for detecting small gradient signals. For temporal decay, a timescale of about 3 minutes is required for the model to reproduce the experimentally observed sensitivity.

Evaluación biológica poblacional de macha (Mesodesma donacium, Lamarck 1818) en la provincia de Islay, Arequipa. Febrero 2015

La evaluación se realizó entre el 20 y 26 de febrero 2015, el área de distribución de la macha comprendió la playa entre punta Corio y Sombrero Chico en la provincia de Islay; no se registró entre el Boquerón y La Ensenada. La mayor concentración se observó entre Las Cuevas y El Tablón (área de repoblamiento de Islay). La densidad relativa de las estaciones/transectos varió entre 0 y 20,39 ejem/m2. El área efectiva de distribución se calculó en 1´413.514 m2, se estimó abundancia en 7´722.393 ejemplares y biomasa total 147,58 t. Se analizó biométricamente 2.612 ejemplares, la talla varió entre 26 y 90 mm de longitud valvar (LV), con moda principal en 62 mm y secundaria en 76 mm, la longitud promedio fue 59,17 mm, el 89,43% estuvo debajo de la Talla Mínima de Captura (TCM= 70 mm). Los perfiles medios de playa fueron de pendiente suave que varió entre 1,00° y 1,72°; en el Sector sur (Punta de Bombón) se observó playas intermedias acercándose a los límites de playas disipativas (Ω entre 3,14 y 5,92), en el Sector norte (Dean Valdivia - Mejía) se observaron playas intermedias - disipativas (Ω entre 4,53 y 5,22). La temperatura superficial del mar varió entre 16,4 y 21,0 °C, promedio 18,2±0,02 °C. En el análisis del plancton, entre El Molle y Cardones y El Conto y Mejía, se observó larvas D y umbonadas con características similares a Mesodesma donacium.

Reproductive Biology of Corymbia citriodora subsp. variegata and Effective Pollination across its Native Range.

The spotted gum species complex represents a group of four eucalypt hardwood taxa that have a native range that spans the east coast of Australia, with a morphological cline from Victoria to northern Queensland. Of this group, Corymbia citriodora subsp. variegata (CCV) is widespread in south-eastern Queensland and northern New South Wales. It is currently the most commonly harvested native hardwood in Queensland. However, little basic knowledge of the reproductive biology of the species is available to inform genetic improvement and resource management programmes. Here we take an integrative approach, using both field and molecular data, to identify ecological factors important to mating patterns in native populations of CCV. Field observation of pollinator visitation and flowering phenology of 20 trees showed that foraging behaviour of pollinator guilds varies depending on flowering phenology and canopy structure. A positive effect of tree mean flowering effort was found on insect visitation, while bat visitation was predicted by tree height and by the number of trees simultaneously bearing flowers. Moreover, introduced honeybees were observed frequently, performing 73% of detected flower visits. Conversely, nectar-feeding birds and mammals were observed sporadically with lorikeets and honeyeaters each contributing to 11% of visits. Fruit bats, represented solely by the grey-headed flying fox, performed less than 2% of visits. Genotyping at six microsatellite markers in 301 seeds from 17 families sampled from four of Queensland's native forests showed that CCV displays a mixed-mating system that is mostly outcrossing (tm = 0.899 ± 0.021). Preferential effective pollination from near-neighbours was detected by means of maximum-likelihood paternity analysis with up to 16% of reproduction events resulting from selfing. Forty to 48% of fertilising pollen was also carried from longer distance (>60 m). Marked differences in foraging behaviour and visitation frequency between observed pollinator guilds suggests that the observed dichotomy of effective pollen movement in spotted gums may be due to frequent visit from introduced honeybees favouring geitonogamy and sporadic visits from honeyeaters and fruit bats resulting in potential long-distance pollinations.

A simple and effective air shotgun for collecting small birds and other vertebrates at close range

Scientific collections are important sources of material for many areas of ornithological research. Although firearms (particularly shotguns) have been the standard for avian scientific collecting for more than 100 years, their use is restricted in many areas of the world. We describe a cheap, relatively silent, and effective air shotgun for collecting birds weighing up to 50 g at distances up to 4 m. This air shotgun is capable of shooting birdshot, uses hollow metal rivets connected to plastic straws as shot shells, and represents a simple adaptation of any 0.177 or 0.22 cal single-shot, break-barrel air rifle with at least 25 joules of muzzle energy. This air shotgun will be especially useful for focused sampling of birds (and other small vertebrates) in situations where firearm use or transport is restricted.

Planning for company growth; the executive's guide to effective long range planning.

Mode of access: Internet.

Identifying effective leadership practices for implementing a new mathematics curriculum in Taipei

This study explores successful junior high school principals’ leadership practices for implementing the reformed mathematics curriculum in Taipei. Avolio and Bass’s (2002) full range leadership theory was used to record data through interviews and observations of five Taipei “Grade A” junior high school principals. Findings revealed that specific leadership practices linked to management by exception-active and contingent reward (transaction leadership), and individualised consideration and idealised influence (transformational) were considered effective for implementing reform measures. Ensuring principals are aware of effective measures may further assist reform agendas.

CTA1-DD is an effective adjuvant for targeting anti-chlamydial immunity to the murine genital mucosa

Chlamydia trachomatis is a significant human pathogen with potentially severe disease sequelae in the genital tract, including infertility. A successful vaccine will need to effectively target immunity to the genital mucosa. Intranasal immunisation with cholera toxin (CT) can target immunity to the genital tract, but has the potential to cause neurological side effects. CTA1-DD is a non-toxic potent mucosal adjuvant which combines the enzymatic properties of CT, with a B cell targeting moiety. Here, we demonstrate that intranasal immunisation with CTA1-DD and chlamydial Major Outer Membrane Protein (MOMP) results in the induction of neutralising systemic and mucosal antibodies, and reduces the level of chlamydial shedding following intravaginal challenge with Chlamydia muridarum. Thus, CTA1-DD is an effective adjuvant for vaccine development against Chlamydia trachomatis, and possibly also a range of other genital pathogens.

Extending the dynamic range of robotic vision

Conventional cameras have limited dynamic range, and as a result vision-based robots cannot effectively view an environment made up of both sunny outdoor areas and darker indoor areas. This paper presents an approach to extend the effective dynamic range of a camera, achieved by changing the exposure level of the camera in real-time to form a sequence of images which collectively cover a wide range of radiance. Individual control algorithms for each image have been developed to maximize the viewable area across the sequence. Spatial discrepancies between images, caused by the moving robot, are improved by a real-time image registration process. The sequence is then combined by merging color and contour information. By integrating these techniques it becomes possible to operate a vision-based robot in wide radiance range scenes.

Gamma-tocotrienol as an effective agent in targeting prostate cancer stem cell-like population

Emerging evidence supports that prostate cancer originates from a rare sub-population of cells, namely prostate cancer stem cells (CSCs). Conventional therapies for prostate cancer are believed to mainly target the majority of differentiated tumor cells but spare CSCs, which may account for the subsequent disease relapse after treatment. Therefore, successful elimination of CSCs may be an effective strategy to achieve complete remission from this disease. Gamma-tocotrienols (-T3) is one of the vitamin-E constituents which have been shown to have anticancer effects against a wide-range of human cancers. Recently, we have reported that -T3 treatment not only inhibits prostate cancer cell invasion but also sensitizes the cells to docetaxel-induced apoptosis, suggesting that -T3 may be an effective therapeutic agent against advanced stage prostate cancer. Here, we demonstrate for the first time that -T3 can down-regulate the expression of prostate CSC markers (CD133/CD44) in androgen independent (AI) prostate cancer cell lines (PC-3 & DU145), as evident from western blotting analysis. Meanwhile, the spheroid formation ability of the prostate cancer cells was significantly hampered by -T3 treatment. In addition, pre-treatment of PC-3 cells with -T3 was found to suppress tumor initiation ability of the cells. More importantly, while CD133-enriched PC-3 cells were highly resistant to docetaxel treatment, these cells were as sensitive to -T3 treatment as the CD133-depleted population. Our data suggest that -T3 may be an effective agent in targeting prostate CSCs, which may account for its anticancer and chemosensitizing effects reported in previous studies.

Electron interaction with gel dosimeters : effective atomic numbers for collisional, radiative and total interaction processes

The effective atomic number is widely employed in radiation studies, particularly for the characterisation of interaction processes in dosimeters, biological tissues and substitute materials. Gel dosimeters are unique in that they comprise both the phantom and dosimeter material. In this work, effective atomic numbers for total and partial electron interaction processes have been calculated for the first time for a Fricke gel dosimeter, five hypoxic and nine normoxic polymer gel dosimeters. A range of biological materials are also presented for comparison. The spectrum of energies studied spans 10 keV to 100 MeV, over which the effective atomic number varies by 30 %. The effective atomic numbers of gels match those of soft tissue closely over the full energy range studied; greater disparities exist at higher energies but are typically within 4 %.

Evaluating multivariate volatility forecasts : how effective are statistical and economic loss functions?

Multivariate volatility forecasts are an important input in many financial applications, in particular portfolio optimisation problems. Given the number of models available and the range of loss functions to discriminate between them, it is obvious that selecting the optimal forecasting model is challenging. The aim of this thesis is to thoroughly investigate how effective many commonly used statistical (MSE and QLIKE) and economic (portfolio variance and portfolio utility) loss functions are at discriminating between competing multivariate volatility forecasts. An analytical investigation of the loss functions is performed to determine whether they identify the correct forecast as the best forecast. This is followed by an extensive simulation study examines the ability of the loss functions to consistently rank forecasts, and their statistical power within tests of predictive ability. For the tests of predictive ability, the model confidence set (MCS) approach of Hansen, Lunde and Nason (2003, 2011) is employed. As well, an empirical study investigates whether simulation findings hold in a realistic setting. In light of these earlier studies, a major empirical study seeks to identify the set of superior multivariate volatility forecasting models from 43 models that use either daily squared returns or realised volatility to generate forecasts. This study also assesses how the choice of volatility proxy affects the ability of the statistical loss functions to discriminate between forecasts. Analysis of the loss functions shows that QLIKE, MSE and portfolio variance can discriminate between multivariate volatility forecasts, while portfolio utility cannot. An examination of the effective loss functions shows that they all can identify the correct forecast at a point in time, however, their ability to discriminate between competing forecasts does vary. That is, QLIKE is identified as the most effective loss function, followed by portfolio variance which is then followed by MSE. The major empirical analysis reports that the optimal set of multivariate volatility forecasting models includes forecasts generated from daily squared returns and realised volatility. Furthermore, it finds that the volatility proxy affects the statistical loss functions’ ability to discriminate between forecasts in tests of predictive ability. These findings deepen our understanding of how to choose between competing multivariate volatility forecasts.