Thermal profile of a near-adiabatic compression process in a cylindrical tube and establishment of critical control elements for repeatable process control

The compressed gas industry and government agencies worldwide utilize "adiabatic compression" testing for qualifying high-pressure valves, regulators, and other related flow control equipment for gaseous oxygen service. This test methodology is known by various terms including adiabatic compression testing, gaseous fluid impact testing, pneumatic impact testing, and BAM testing as the most common terms. The test methodology will be described in greater detail throughout this document but in summary it consists of pressurizing a test article (valve, regulator, etc.) with gaseous oxygen within 15 to 20 milliseconds (ms). Because the driven gas1 and the driving gas2 are rapidly compressed to the final test pressure at the inlet of the test article, they are rapidly heated by the sudden increase in pressure to sufficient temperatures (thermal energies) to sometimes result in ignition of the nonmetallic materials (seals and seats) used within the test article. In general, the more rapid the compression process the more "adiabatic" the pressure surge is presumed to be and the more like an isentropic process the pressure surge has been argued to simulate. Generally speaking, adiabatic compression is widely considered the most efficient ignition mechanism for directly kindling a nonmetallic material in gaseous oxygen and has been implicated in many fire investigations. Because of the ease of ignition of many nonmetallic materials by this heating mechanism, many industry standards prescribe this testing. However, the results between various laboratories conducting the testing have not always been consistent. Research into the test method indicated that the thermal profile achieved (i.e., temperature/time history of the gas) during adiabatic compression testing as required by the prevailing industry standards has not been fully modeled or empirically verified, although attempts have been made. This research evaluated the following questions: 1) Can the rapid compression process required by the industry standards be thermodynamically and fluid dynamically modeled so that predictions of the thermal profiles be made, 2) Can the thermal profiles produced by the rapid compression process be measured in order to validate the thermodynamic and fluid dynamic models; and, estimate the severity of the test, and, 3) Can controlling parameters be recommended so that new guidelines may be established for the industry standards to resolve inconsistencies between various test laboratories conducting tests according to the present standards?

Cultural impact on e-service use in Saudi Arabia : results from focus groups

This paper reports the results of focus groups obtained as part of a full study that uses a mixed method approach to answer the following question: what are the cultural values that impact on e-service use in Saudi Arabia? In order to answer this question we reviewed culture theories, dimensions, and models that have been identified in the literature. Four focus groups interviewing experts and general users (customers) of online services in Saudi Arabia have been completed aiming at the end to identify the uncovered elements of Saudi culture in the literature, which hopefully will result in developing a framework of cultural values that affect e-service use in Saudi context. This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture. It will then describe the method used, and finally discussing the findings of the focus groups. Findings revealed four factors that have not been covered in the literature and need to be investigated namely: nepotism, the lack of human interaction, services oriented culture, and the career path.

Developing authentic professional knowledge through transformative community engagement in an interdisciplinary service learning project

This showcase presents a preliminary analysis of a community service learning project designed to align more authentically with contemporary society and emerging constructs of professional knowledge. As described in the paper, the project involves a multidisciplinary group of students working collaboratively with a community organisation to find creative presponses to challenging issues concerning the organisation's identity, how it interfaces with stakeholders, and how it evidences its inclusive practice. Of particular interest is how the interdisciplinary practice of the students within a service learning context encouraged reconsideration of their world0view and their rols as future professionals. Also highlighted is the need for greater congruence between the goals of the project and the structural elements of the curriculum.

Understanding pre-service teacher conceptual change through slowmation animation

This paper is an exploration of conceptual change. It reports on a study which utilised Hewson and Lemberger’s (2000) Conceptual Status Elements, and explores the unique contribution of Slowmation Animation in the conceptual learning of pre-service science teachers. 15 short animations were created by 55 participants in a single two hour tutorial class as a part of their methods training. Conceptual change was found to occur when their animation topic challenged their understandings of the processes within the scientific concept. The pre-service science teachers reported an enthusiasm for Slowmation Animation as a method for learning how to learn, as well as for highlighting what they thought they knew, but didn’t really know.

Using the Donabedian framework to examine the quality and safety of nursing service innovation

Aims and objectives To evaluate the safety and quality of nurse practitioner service using the audit framework of Structure,Process and Outcome. Background Health service and workforce reform are on the agenda of governments and other service providers seeking to contain healthcare costs whilst providing safe and effective health care to communities. The nurse practitioner service is one health workforce innovation that has been adopted globally to improve timely access to clinical care, but there is scant literature reporting evaluation of the quality of this service innovation. Design. A mixed-methods design within the Donabedian evaluation framework was used. Methods The Donabedian framework was used to evaluate the Structure, Process and Outcome of nurse practitioner service. A range of data collection approaches was used, including stakeholder survey (n=36), in-depth interviews (11 patients and 13 nurse practitioners) and health records data on service processes. Results The study identified that adequate and detailed preparation of Structure and Process is essential for the successful implementation of a service innovation. The multidisciplinary team was accepting of the addition of nurse practitioner service, and nurse practitioner clinical care was shown to be effective, satisfactory and safe from the perspective of the clinician stakeholders and patients. Conclusions This study demonstrated that the Donabedian framework of Structure, Process and Outcome evaluation is a valuable and validated approach to examine the safety and quality of a service innovation. Furthermore, in this study, specific Structure elements were shown to influence the quality of service processes further validating the framework and the interdependence of the Structure, Process and Outcome components. Relevance to clinical practice Understanding the structure and process requirements for establishing nursing service innovation lays the foundation for safe, effective and patient-centred clinical care.

Service condition of railroad corridors around the insulated rail joints

Railroad corridors contain large number of Insulated Rail Joints (IRJs) that act as safety critical elements in the circuitries of the signaling and broken rail identification systems. IRJs are regarded as sources of excitation for the passage of loaded wheels leading to high impact forces; these forces in turn cause dips, cross levels and twists to the railroad geometry in close proximity to the sections containing the IRJs in addition to the local damages to the railhead of the IRJs. Therefore, a systematic monitoring of the IRJs in railroad is prudent to mitigate potential risk of their sudden failure (e.g., broken tie plates) under the traffic. This paper presents a simple method of periodic recording of images using time-lapse photography and total station surveying measurements to understand the ongoing deterioration of the IRJs and their surroundings. Over a 500 day period, data were collected to examine the trends in narrowing of the joint gap due to plastic deformation the railhead edges and the dips, cross levels and twists caused to the railroad geometry due to the settlement of ties (sleepers) around the IRJs. The results reflect that the average progressive settlement beneath the IRJs is larger than that under the continuously welded rail, which leads to excessive deviation of railroad profile, cross levels and twists.

A comparative analysis of the integration of SOA elements in widely-used enterprise architecture frameworks

In recent years, enterprise architecture (EA) has captured increasing interest as a means to systematically consolidate and manage various enterprise artefacts in order to provide holistic decision support for business/IT alignment and business/IT landscapes management. To provide a holistic perspective on the enterprise over time, EA frameworks need to co-evolve with the changes in the enterprise and its IT over time. In this paper we focus on the emergence of Service-Oriented Architecture (SOA). There is a need to integrate SOA with EA to keep EA relevant and to use EA products to help drive successful SOA. This paper investigates and compares the integration of SOA elements in five widely used EA frameworks: Archimate, The Open Group Architecture Framework (TOGAF), Federal Enterprise Architecture Framework (FEAF), Department of Defence Architecture Framework (DoDAF) and the Ministry of Defence Architecture Framework (MODAF). It identifies what SOA elements are considered and their relative position in the overall structure. The results show that services and related elements are far from being well-integrated constructs in current EA frameworks and that the different EA frameworks integrated SOA elements in substantially different ways. Our results can support the academic EA and SOA communities with a closer and more consistent integration of EA and SOA and support practitioners in identifying an EA framework that provides the SOA support that matches their requirements.

Cultural impact on e-service use in Saudi Arabia : results from questionnaire

This paper reports the results of a mixed method approach to answer: what are the cultural values that impact on e-service use in Saudi Arabia? Cultural theories, dimensions, and models previously identified in the literature, in addition to individual interviews and focus groups, test the current identified uncovered elements of Saudi culture. This paper will firstly, introduce the importance of culture and define the aspects of Saudi culture. It will then describe the method used and present the questionnaire findings. All of the tested hypotheses were found consistent with their predicted outcomes except hypotheses 4 and 8 were partially consistent. It is evidenced that consideration of the impact of the cultural values will mainly contribute to the enhancement of social and organisational aspects of e-society research and practices, by deeply understanding them as of the influntials to e-service implementation.

Satisfaction with emergency department service among non-English-speaking background patients

Objective: The present study aims to investigate non-English-speaking background (NESB) patients’ satisfaction with hospital ED service and compare it with that of English-speaking background (ESB) patients. Methods: A cross-sectional survey was conducted at the ED of an adult tertiary referral hospital in Queensland, Australia. Patients assigned an Australasian Triage Scale score of 3, 4 or 5 were surveyed in the ED, before and after their ED service. Pearson χ2- test and multivariate logistic regression analyses were performed to examine the differences between the ESB and NESB groups in terms of patient-reported satisfaction. Results: In total, 828 patients participated in the present study. Although the overall satisfaction with the service was high – 95.1% (ESB) and 90.5% (NESB) – the NESB patients who did not use an interpreter were less satisfied with their ED service than the ESB patients (odds ratio 0.5, 95% confidence interval 0.3–0.8, P = 0.013). The promptness of service received the lowest satisfaction rates (ESB 85.4% [82.4–88.0], NESB 74.5% [68.5– 79.7], P < 0.001), whereas courtesy and friendliness received the highest satisfaction rates (ESB 98.8 [97.6–99.4], NESB 97.0 [93.9–98.5], P = 0.063). All participants reported the promptness of service (33.5%), quality and professional care (18.5%) and communication (17.6%) as the most important elements of ED service. Conclusion: The NESB patients were significantly less satisfied than the ESB patients with the ED service. Use of an interpreter improved the NESB patients’ level of satisfaction. Further research is required to examine what NESB patients’ expectations of ED service are.

Recreational needs and service performance expectations

The theoretical contribution of this study lies with its focus on subjective experiencing, that is, the emotional convergence between feeling states, and perceptions of servicescapes and holiday activities. An empirical study models the impact of recreational needs on the perceived importance of destination attributes and intentions to participate in activities. A sample of prospective tourists was asked to indicate how important they considered servicescape elements to be in their general holiday planning. They were also asked to report on their emotional state (orientation) as a proxy for their needs for recreation, and to state their intention and likely involvement with holiday activities. Results suggest that those with high recreational needs (self-reflexive and inward-looking) regard elements of tourism servicescapes as significantly more important than those without (who are outward-looking and energetic), as well as show significant variations in their inclinations to be active and explorative at destinations. Rather, those with higher recreational needs as measured by combinations of lack of energy, self-confidence, and physiological well-being look for creature comfort, coziness, and familiarity, in other words, for things they already know and have experienced before. Subjective experiencing and service performance evaluations are thereby suggested to be influenced by emotional states. These states may also impact tourists' recognition of destination uniqueness as a major component of a destination's competitive advantage that cannot easily be copied. As a consequence, it may be worth reconsidering the role of recreation in tourism service design. Turning an inwardlooking focus bent on recreation to an outward-looking one interested in discovery would enable more tourists to more fully experience the destination before they leave.

Service Composition on a Mobile Phone

With the recent increase in interest in service-oriented architectures (SOA) and Web services, developing applications with the Web services paradigm has become feasible. Web services are self-describing, platform-independent computational elements. New applications can be assembled from a set of previously created Web services, which are composed together to make a service that uses its components to perform a certain task. This is the idea of service composition. To bring service composition to a mobile phone, I have created Interactive Service Composer for mobile phones. With Interactive Service Composer, the user is able to build service compositions on his mobile phone, consisting of Web services or services that are available from the mobile phone itself. The service compositions are reusable and can be saved in the phone's memory. Previously saved compositions can also be used in new compositions. While developing applications for mobile phones has been possible for some time, the usability of the solutions is not the same as when developing for desktop computers. When developing for mobile phones, the developer has to more carefully consider the decisions he is going to make with the program he is developing. With the lack of processing power and memory, the applications cannot function as well as on desktop PCs. On the other hand, this does not remove the appeal of developing applications for mobile devices.

Value of Image in Service

Purpose This paper takes a customer view on corporate image and value, and discusses the value of image in service. We propose a model depicting how the customer’s corporate brand image affects the customer’s value-in-use. Methodology/approach The paper represents conceptual development on customers’ value and image construction processes. By integrating ideas and elements from the current service and branding literature a model is proposed that extends current views on how value-in-use emerges. Findings From a current service perspective it is the customer who makes value assessments when experiencing service. Similarly, if branding is a concept used to denote the service provider’s intentions and attempts to create a corporate brand, image construction is the corresponding process where the customer constructs the corporate image. This image construction process is always present both in service interactions and in communication and has an effect on the customer’s value-in-use. We argue that two interrelated concepts are needed to capture corporate image construction and dynamics and value-in-use – the image-in-use and image heritage. Research implications The model integrates two different streams of research pointing to the need to consider traditional marketing communication and service interactions as inherently related to each other from the customer’s point of view. Additionally the model gives a platform for understanding how value-in-use emerges over time. New methodological approaches and techniques to capture image-in-use and image heritage and their interplay with value-in-use are needed. Practical implications The company may not be able to control the emergence of value-in-use but may influence it, not only in interactions with the customer but also with pure communication. Branding activities should therefore be considered related to service operations and service development. Additionally, practitioners would need to apply qualitative methods to understand the customer’s view on image and value-in-use. Originality/value The paper presents a novel approach for understanding and studying that the customer’s image of a company influences emergence of value-in-use. The model implies that the customer’s corporate image has a crucial role for experienced value-in-use.

Marketing and the Logic of Service: Value Facilitation, Value Creation and Co-creation, and Their Marketing Implications

The discussion of a service-dominant logic has made the findings of decades of service marketing research a topic of interest for marketing at large. Some fundamental aspects of the logic such as value creation and its marketing implications are more complex than they have been treated as so far and need to be further developed to serve marketing theory and practice well. Following the analysis in the present article it is argued that although customers are co-producers in service processes, according to the value-in-use notion adopted in the contemporary marketing and management literature they are fundamentally the creators of value for themselves. Furthermore, it is concluded that although by providing goods and services as input resources into customers’ consumption and value-generating processes firms are fundamentally value facilitators, interactions with customers that exist or can be created enable firms to engage themselves with their customers’ processes and thereby they become co-creators of value with their customers. As marketing implications it is observed that 1) the goal of marketing is to support customers’ value creation, 2) following a service logic and due to the existence of interactions where the firm’s and the customer’s processes merge into an integrated joint value creation process, the firm is not restricted to making value propositions only, but can directly and actively influence the customer’s value fulfilment as well and extend its marketing process to include activities during customer-firm interactions, and 3) although all goods and services are consumed as service, customers’ purchasing decisions can be expected to be dependant of whether they have the skills and interest to use a resource, such as a good, as service or want to buy extended market offerings including process-related elements. Finally, the analysis concludes with five service logic theses.

Building digital capability: Leading and managing an effective digital organisation (team, service, department)

This is a version of the Jisc ‘Six Elements of Digital Capabilities’ model, specifically to support Jisc’s members in the area of Digital Leadership. It is one example of the base model being used in a particular context and is not meant to be definitive.

Studying the influence of substitutional elements on mechanical behavior of Alloy 718

In nickel-based superalloys, substitutional solute species have a strong impact on in service mechanical properties as well as on oxidation and corrosion resistances. In alloy 718, recent studies carried out by tensile tests highlighted the fact that refractory solute species are able to interact strongly with mobile dislocations during plastic deformation, generating dynamic strain ageing, and, in wide ranges of tests temperatures and strain rates, Portevin-Le Chatelier effect. The precise nature of the substitutional element responsible for such a dynamic interaction is still subject to debate. We addressed this question by means of mechanical spectroscopy studies of alloy 718 and various related alloys corresponding to monitored changes in the chemical composition. Only a single internal friction relaxation peak has been observed for all the studied alloys. By analyzing the damping behavior of these alloys at different imposed solicitation frequencies by sweeping a large temperatures range, the activation energies of the relaxation process and the type of mechanism involved have been determined. The process is a "Zener relaxation" in the alloys, i.e. a substitutional atoms dipole reorientation under applied stress. The results tend to prove that Niobium is not involved in the relaxation process whereas Molybdenum content seems to play an important role in the relaxation intensity.