Modificacions en la dinàmica de processat i en les característiques finals de productes carnis amb contingut reduït de sodi

In recent years, several studies have linked sodium intake to hypertension, and the consequent mortality risk due to vascular diseases. Several UE member states and the WHO recommend reducing the salt intake level to a maximum of 5 g per day. Salt is a useful ingredient for meat product processing. A reduction of added salt provokes a decrease in the quality of meat products. As a technological strategy, the reduction of the amount of added salt and the addition of potassium lactate, until a 30% molar substitution (taking into account the salt standard amount (30 g/kg)), have been proposed. This substitution could modify the product evolution during its processing. The knowledge of these effects could make the optimization of the process easier. In dry-cured meat products with a reduced salt content, it could be concluded that the proposed strategy reduces the processing period, as well as the anomalous texture risk; it increases the product safety and it does not modify the visual attributes.

A candidate gene approach to identify DNA markers associated with meat quality and production traits: investigation of several cathepsin genes in Italian heavy pigs.

The cathepsin enzymes represent an important family of lysosomal proteinases with a broad spectrum of functions in many, if not in all, tissues and cell types. In addition to their primary role during the normal protein turnover, they possess highly specific proteolytic activities, including antigen processing in the immune response and a direct role in the development of obesity and tumours. In pigs, the involvement of cathepsin enzymes in proteolytic processes have important effects during the conversion of muscle to meat, due to their influence on meat texture and sensory characteristics, mainly in seasoned products. Their contribution is fundamental in flavour development of dry-curing hams. However, several authors have demonstrated that high cathepsin activity, in particular of cathepsin B, is correlated to defects of these products, such as an excessive meat softness together with abnormal free tyrosine content, astringent or metallic aftertastes and formation of a white film on the cut surface. Thus, investigation of their genetic variability could be useful to identify DNA markers associated with these dry cured hams parameters, but also with meat quality, production and carcass traits in Italian heavy pigs. Unfortunately, no association has been found between cathepsin markers and meat quality traits so far, in particular with cathepsin B activity, suggesting that other genes, besides these, affect meat quality parameters. Nevertheless, significant associations were observed with several carcass and production traits in pigs. A recent study has demonstrated that different single nucleotide polymorphisms (SNPs) localized in cathepsin D (CTSD), F (CTSF), H and Z genes were highly associated with growth, fat deposition and production traits in an Italian Large White pig population. The aim of this thesis was to confirm some of these results in other pig populations and identify new cathepsin markers in order to evaluate their effects on cathepsin activity and other production traits. Furthermore, starting from the data obtained in previous studies on CTSD gene, we also analyzed the known polymorphism located in the insulin-like growth factor 2 gene (IGF2 intron3-g.3072G>A). This marker is considered the causative mutation for the quantitative trait loci (QTL) affecting muscle mass and fat deposition in pigs. Since IGF2 maps very close to CTSD on porcine chromosome (SSC) 2, we wanted to clarify if the effects of the CTSD marker were due to linkage disequilibrium with the IGF2 intron3-g.3072G>A mutation or not. In the first chapter, we reported the results from these two SSC2 gene markers. First of all, we evaluated the effects of the IGF2 intron3-g.3072G>A polymorphism in the Italian Large White breed, for which no previous studies have analysed this marker. Highly significant associations were identified with all estimated breeding values for production and carcass traits (P<0.00001), while no effects were observed for meat quality traits. Instead, the IGF2 intron3-g.3072G>A mutation did not show any associations with the analyzed traits in the Italian Duroc pigs, probably due to the low level of variability at this polymorphic site for this breed. In the same Duroc pig population, significant associations were obtained for the CTSD marker for all production and carcass traits (P < 0.001), after excluding possible confounding effects of the IGF2 mutation. The effects of the CTSD g.70G>A polymorphism were also confirmed in a group of Italian Large White pigs homozygous for the IGF2 intron3-g.3072G allele G (IGF2 intron3-g.3072GG) and by haplotype analysis between the markers of the two considered genes. Taken together, all these data indicated that the IGF2 intron3-g.3072G>A mutation is not the only polymorphism affecting fatness and muscle deposition in pigs. In the second chapter, we reported the analysis of two new SNPs identified in cathepsin L (CTSL) and cathepsin S (CTSS) genes and the association results with meat quality parameters (including cathepsin B activity) and several production traits in an Italian Large White pig population. Allele frequencies of these two markers were evaluated in 7 different pig breeds. Furthermore, we mapped using a radiation hybrid panel the CTSS gene on SSC4. Association studies with several production traits, carried out in 268 Italian Large White pigs, indicated positive effects of the CTSL polymorphism on average daily gain, weight of lean cuts and backfat thickness (P<0.05). The results for these latter traits were also confirmed using a selective genotype approach in other Italian Large White pigs (P<0.01). In the 268 pig group, the CTSS polymorphism was associated with feed:gain ratio and average daily gain (P<0.05). Instead, no association was observed between the analysed markers and meat quality parameters. Finally, we wanted to verify if the positive results obtained for the cathepsin L and S markers and for other previous identified SNPs (cathepsin F, cathepsin Z and their inhibitor cystatin B) were confirmed in the Italian Duroc pig breed (third chapter). We analysed them in two groups of Duroc pigs: the first group was made of 218 performance-tested pigs not selected by any phenotypic criteria, the second group was made of 100 Italian Duroc pigs extreme and divergent for visible intermuscular fat trait. In the first group, the CTSL polymorphism was associated with weight of lean cuts (P<0.05), while suggestive associations were obtained for average daily gain and backfat thickness (P<0.10). Allele frequencies of the CTSL gene marker also differed positively among the visible intermuscular extreme tails. Instead, no positive effects were observed for the other DNA markers on the analysed traits. In conclusion, in agreement with the present data and for the biological role of these enzymes, the porcine CTSD and CTSL markers: a) may have a direct effect in the biological mechanisms involved in determining fat and lean meat content in pigs, or b) these markers could be very close to the putative functional mutation(s) present in other genes. These findings have important practical applications, in particular the CTSD and CTSL mutations could be applied in a marker assisted selection (MAS) both in the Italian Large White and Italian Duroc breeds. Marker assisted selection could also increase in efficiency by adding information from the cathepsin S genotype, but only in the Italian Large White breed.

Characterization and exploiment of Microbial Strains to be used in Meat Processing and Fermentation

The principal aim of this research project has been the evaluation of the specific role of yeasts in ripening processes of dry-cured meat products, i.e. speck and in salami produced by adding Lactobacilli starter cultures, i.e. L. sakei, L. casei, L. fermentum, L. rhamnosus, L.sakei + S.xylosus. In particular the contribution of the predominant yeasts to the hydrolytic patterns of meat proteins has been studied both in model system and in real products. In fact, although several papers have been published on the microbial, enzymatic, aromatic and chemical characterization of dry-cured meat e.g. ham over ripening, the specific role of yeasts has been often underestimated. Therefore this research work has been focused on the following aspects: 1. Characterization of the yeasts and lactic acid bacteria in samples of speck produced by different farms and analyzed during the various production and ripening phases 2. Characterization of the superficial or internal yeasts population in salami produced with or without the use of lactobacilli as starter cultures 3. Molecular characterization of different strains of yeasts and detection of the dominant biotypes able to survive despite environmental stress factors (such as smoke, salt) 4. Study of the proteolytic profiles of speck and salami during the ripening process and comparison with the proteolytic profiles produced in meat model systems by a relevant number of yeasts isolated from speck and salami 5. Study of the proteolytic profiles of Lactobacilli starter cultures in meat model systems 6. Comparative statistical analysis of the proteolytic profiles to find possible relationships between specific bands and peptides and specific microorganisms 7. Evaluation of the aromatic characteristics of speck and salami to assess relationships among the metabolites released by the starter cultures or the dominant microflora

Study of Candidate Genes for production and carcass traits in Italian Heavy Pigs: identification of a new DNA Markers, Expression Studies and Association Analysis using Different Experimental Design

Heavy pig breeding in Italy is mainly oriented for the production of high quality processed products. Of particular importance is the dry cured ham production, which is strictly regulated and requires specific carcass characteristics correlated with green leg characteristics. Furthermore, as pigs are slaughtered at about 160 kg live weight, the Italian pig breeding sector faces severe problems of production efficiency that are related to all biological aspects linked to growth, feed conversion, fat deposition and so on. It is well known that production and carcass traits are in part genetically determined. Therefore, as a first step to understand genetic basis of traits that could have a direct or indirect impact on dry cured ham production, a candidate gene approach can be used to identify DNA markers associated with parameters of economic importance. In this thesis, we investigated three candidate genes for carcass and production traits (TRIB3, PCSK1, MUC4) in pig breeds used for dry cured ham production, using different experimental approaches in order to find molecular markers associated with these parameters.

Productive performance, carcass and meat quality of intact and castrated gilts slaughtered at 106 or 122 kg BW

A total of 200 (Landrace3Large White dam3Pietrain3Large White sire) gilts of 5063 days of age (23.361.47 kg BW) were used to investigate the effects of castration (intact gilt, IG v. castrated gilt, CG) and slaughter weight (SW; 106 v. 122 kg BW) on productive performance, carcass and meat quality. Four treatments were arranged factorially and five replicates of 10 pigs each per treatment. Half of the gilts were ovariectomized at 58 days of age (8 days after the beginning of the trial at 29.861.64 kg BW), whereas the other half remained intact. The pigs were slaughtered at 106 or 122 kg BW. Meat samples were taken at Musculus longissimus thoracis at the level of the last rib and subcutaneous fat samples were taken at the tail insertion. For the entire experimental period, CG had higher ( P,0.05) BW gain and higher ( P,0.001) backfat and Musculus gluteus medius fat thickness than IG. However, IG had higher ( P,0.05) loin and trimmed primal cut yields than CG. Meat quality was similar for IG and CG but the proportion of linoleic acid in subcutaneous fat was higher ( P,0.001) for IG. Pigs slaughtered at 122 kg BW had higher ( P,0.001) feed intake and poorer feed efficiency than pigs slaughtered at 106 kg BW. An increase in SW improved ( P,0.001) carcass yield but decreased ( P,0.05) trimmed primal cut yield. Meat from pigs slaughtered at the heavier BW was redder (a*; P,0.001) and had more ( P,0.01) intramuscular fat and less thawing ( P,0.05) and cooking ( P,0.10) loss than meat from pigs slaughtered at the lighter BW. In addition, pigs slaughtered at 122 kg BW had less ( P,0.01) linoleic acid content in subcutaneous fat than pigs slaughtered at 106 kg BW. Castration of gilts and slaughtering at heavier BW are useful practices for the production of heavy pigs destined to the dry-cured industry in which a certain amount of fat in the carcass is required. In contrast, when the carcasses are destined to fresh meat production, IG slaughtered at 106 kg BW is a more efficient alternative.

Influencia de la castración y la línea genética paterna sobre el rendimiento productivo y la calidad de la canal y de la carne en cerdos sacrificados a pesos elevados

El objetivo general de esta Tesis Doctoral fue estudiar la influencia del sexo, el método de castración de los machos y la línea genética paterna sobre la productividad y la calidad de la canal y de la carne en cerdos blancos sacrificados a pesos elevados con destino a la industria de los productos curados de calidad. En el experimento 1, se utilizaron 360 cerdos sacrificados a 125 kg de peso vivo (PV) para estudiar la influencia del sexo y la castración [machos inmunocastrados (MI), machos castrados quirúrgicamente (MC) y hembras enteras (HE)] de dos líneas genéticas paternas Large White (Top York y Tempo) sobre los rendimientos productivos y la calidad de la canal y de la carne. La línea materna utilizada fue Large White × Landrace en todos los casos. Los MI se inmunizaron contra el factor de liberación de gonadotropina (GnRF) mediante la utilización de Improvac a los 78 (16 d en prueba) y 126 (64 d en prueba y 48 d antes del sacrificio) d de edad. Cada uno de los 6 tratamientos experimentales fue replicado 6 veces (cuadra con 10 cerdos). Desde el inicio de la prueba hasta el día de la primera inyección con Improvac (62 a 78 d de edad) los MI y las HE crecieron menos (P < 0,001) que los MC sin que se observaran diferencias en el consumo medio diario de pienso (CMD). Los MC tuvieron peor eficiencia alimenticia que las HE con los MI mostrando valores intermedios (P < 0,01). Entre las dos inyecciones de Improvac (78 a 126 d de edad), los MI crecieron y comieron menos que los MC, mostrando las HE valores intermedios (P < 0,001). Los MI fueron más eficientes que las HE y ambos más eficientes que los MC (P < 0,001). Sin embargo, desde la segunda inyección de Improvac hasta el sacrificio (126 a 174 d de edad) los MI crecieron más y fueron más eficientes (P < 0,001) que las HE y los MC. Al final de la prueba, MI y MC crecieron más (P < 0,01) que HE. Asimismo, los MI fueron más eficientes (P < 0,001) pero presentaron menor rendimiento de canal (P < 0,001) que los MC y las HE. Por otro lado, los MI y las HE depositaron menos grasa dorsal que los MC (P < 0,001). Las hembras tuvieron mayor rendimiento de lomo y menos grasa intramuscular que MI y MC (P < 0,01). Asimismo, las HE tuvieron mayor rendimiento de jamón en fresco y perfilado que los MC con los MI mostrando valores intermedios (P < 0,05). Los cerdos híbridos procedentes de machos Tempo crecieron más (P < 0,001) que los procedentes de machos Top York, sin que se encontraran diferencias para el CMD o para la eficiencia alimenticia. Los híbridos de los cruces con Top York tuvieron mejores rendimientos de jamones frescos y perfilados (P < 0,05) pero menor rendimiento de lomo y menos grasa intramuscular que los cruces con Tempo (P < 0,01). En conclusión, los MI presentaron mejor eficiencia alimenticia, pero menor rendimiento de canal que los MC y las HE. El contenido en grasa intramuscular fue similar entre MC y MI y superior para ambos que para las HE. Los cruces procedentes de la línea paterna Tempo crecieron más y tuvieron mayor contenido en grasa intramuscular, pero un rendimiento en jamón perfilado ligeramente inferior al de los cruces procedentes de la línea paterna Top York. Se concluye que la inmunocastración de los machos es una alternativa viable a la castración quirúrgica para la producción de cerdos pesados destinados a la industria de los productos curados. Debido a su mayor potencial de crecimiento y mayor contenido en grasa intramuscular, los híbridos procedentes de la línea paterna Tempo presentan ventajas frente a los híbridos procedentes de la línea paterna Top York cuando se destinan a la industria de productos curados de calidad. En el experimento 2, se utilizaron 240 cerdos para comparar los rendimientos productivos y los parámetros de calidad de la canal de MI, MC y HE destinados a la industria de productos cárnicos curados procedentes del cruce de la línea materna Large White × Landrace con la línea genética paterna Duroc o Pietrain. Entre las 2 inyecciones de Improvac (87 a 137 d de edad), los MI y las HE crecieron menos que los MC (P < 0,01). Asimismo, los MI comieron menos pienso que las HE y ambos menos que los MC (2,33, 2,55 y 2,77 kg/d; respectivamente; P < 0,001). Como resultado, los MI fueron más eficientes que los MC y las HE (P < 0,001). Desde la segunda inyección de Improvac hasta el momento del sacrificio (137 a 164 d de edad), los MI fueron más eficientes que las HE y ambos más que los MC (0,346, 0,323 y 0,300, respectivamente; P < 0,001). Las diferencias observadas en este periodo entre los sexos en cuanto a rendimientos productivos fueron más pronunciadas en los cerdos procedentes de la línea paterna Pietrain que los de la línea Duroc (P < 0,05 para la interacción). En el global de la prueba (87 a 164 d de edad) el sexo no afectó al crecimiento en los cerdos procedentes de la línea paterna Duroc pero en los cerdos procedentes de la línea paterna Pietrain, los MI y los MC crecieron más que las HE (P < 0,05 para la interacción). Asimismo, los MI tuvieron mejor eficiencia alimenticia (0,406, 0,364 y 0,380, P < 0,001) y menor rendimiento de la canal (76,6, 78,1 y 78,8%; P < 0,001) que los MC y las HE. Las canales de las HE fueron más magras que las canales de los MC, con las canales de los MI mostrando valores intermedios (P < 0,01). El rendimiento en jamones y lomos fue mayor para las HE que para los MI y los MC (P < 0,001). El contenido en grasa intramuscular fue menor en las HE que en los MC, con los MI mostrando valores intermedios (3,5 vs. 3,9 y 3,7%; P < 0,05). Por otra parte, los híbridos procedentes de machos Duroc crecieron más rápido (1,167 vs. 0,986 kg/d; P < 0,001), consumieron más pienso (3,07 vs. 2,56 kg/d; P < 0,001) y tuvieron más grasa intramuscular (P < 0,001), pero menor rendimiento en jamones y lomos (P < 0,01) que los híbridos procedentes de machos Pietrain. Se concluye que los MI presentaron mejores productividades pero menores rendimientos de canal que MC y HE. El contenido en grasa intramuscular en el músculo longissimus dorsi fue menor para las HE que para los MC con valores intermedios para los MI. Los cruces procedentes de la genética paterna Duroc crecieron más y tuvieron más grasa intramuscular pero menos rendimiento de jamón que los cerdos procedentes de machos Pietrain. Por tanto, los MI deben ser preferidos a los MC y los cruces con la línea paterna Duroc deben ser preferidos a los cruces con Pietrain para producir canales cuando sus partes nobles están destinadas a la industria de productos cárnicos curados. En base a estos resultados, se concluye que la inmunocastración es una alternativa factible a la castración quirúrgica y que líneas genéticas paternas Tempo y Duroc son mejores para la producción de cerdo blanco pesado que las líneas Top York y Pietrain. Las interacciones entre el sexo y las líneas genéticas paternas estudiadas, sugieren que el resultado final depende en parte de la línea genética paterna utilizada. En cualquier caso, la inmunocastración es una alternativa factible a la castración quirúrgica para la producción de canales destinadas a la industria de los productos cárnicos curados. ABSTRACT The general aim of this PhD Thesis was to study the influence of sex, method of castration, and genetic background of the sire line on growth performance and carcass and meat quality merits of heavy white pigs destined to the dry-cured industry. In experiment 1, 360 pigs slaughtered at 125 kg of body weight were used to study the influence of sex and castration methodology [immunocastrated males (ICM), surgically castrated males (SCM), and intact females (IF)] of 2 terminal Large White sire lines (Top York and Tempo) on growth performance and carcass and meat quality. The female line was Large White × Landrace in all cases. The ICM pigs were immunized against gonadotropin-releasing factor with Improvac at 78 (16 d on trial) and 126 (64 d on trial and 48 d before slaughter) d of age. Each of the 6 treatments was replicated 6 times (10 pigs/pen). From the start of the experiment to the day of the first Improvac injection (62 to 78 d of age), ICM and IF grew slowlier (P < 0.001) than SCM but no differences in feed intake were detected. The SCM pigs had greater gain to feed ratio (G:F) than the IF with the ICM pigs being intermediate (P < 0.01). Between the 2 Improvac injections (78 to 126 d of age), the ICM pigs ate less feed (P < 0.001) and grew slowlier rate than the SCM pigs, with the growth of IF being intermediate. The ICM pigs were more efficient than the IF, and both were more efficient than the SCM pigs (P < 0.001). However, from the second Improvac injection to slaughter (126 to 174 d of age), the ICM pigs grew at a faster rate (P < 0.001) and were more efficient (P < 0.001) than the IF and the SCM pigs. Cumulatively, ICM and SCM pigs grew faster (P < 0.01) than IF and the ICM pigs were more efficient than the other two sexes (P < 0.001). However, the ICM pigs had reduced (P < 0.001) carcass yield compared with SCM and IF. The ICM and IF pigs also had less (P < 0.001) backfat depth than the SCM pigs. Intact females had higher (P < 0.01) loin yield but less intramuscular fat (P < 0.01) than ICM and SCM pigs and higher (P < 0.05) fresh and trimmed ham yields than SCM pigs, with ICM pigs being intermediate. Crossbreds from the Tempo sires grew faster (P < 0.001) than crossbreds from the Top York sires but no differences (P > 0.10) were detected for feed intake or feed efficiency. Crossbreds from the Top York sires had higher (P < 0.05) fresh and trimmed ham yields but less (P < 0.01) loin yield and intramuscular fat content than crossbreds from the Tempo sires. In conclusion, ICM pigs are more efficient, but have less carcass yield than SCM and IF pigs. The intramuscular fat content was lowest for the IF and similar for ICM and SCM pigs. Crossbreds from Tempo sires were heavier and had greater intramuscular fat content, but had less trimmed ham yield as compared with crossbreds from the Top York sires. Immunocastrated pigs can replace SCM pigs for the production of heavy pigs destined for the dry-cured industry. Because of increased carcass weight and the higher intramuscular content, crossbreds from Tempo sires may have an advantage over crossbreds from Top York sires for the dry-cured industry. In experiment 2, a total of 240 pigs were used to compare growth performance and carcass quality traits of immunocastrated males, surgically castrated males, and intact females of crossbreds from Large White × Landrace females and Duroc or Pietrain sires destined to the dry-cured industry. Between the 2 Improvac injections (87 and 137 d of age), ICM and IF pigs had lower average daily gain (ADG) than SCM pigs (P < 0.01). Also, ICM pigs ate less feed than IF and both type of pigs ate less than SCM pigs (2.33, 2.55, and 2.77 kg/d; P < 0.001). Consequently, ICM pigs had better G:F than SCM and IF (P < 0.001). From the second Improvac injection to slaughter (137 to 164 d of age), ICM pigs were more efficient than IF and both were more efficient than SCM pigs (0.346, 0.323, and 0.300 g/g; P < 0.001). The differences in growth performance among genders observed in this period were more pronounced for the Pietrain than for the Duroc crossbreds (P < 0.05 for the interaction). For the entire experimental period (87 to 164 d of age), gender did not affect ADG for Duroc crossbreds but for Pietrain crossbreds ICM and SCM had higher ADG than IF (P < 0.05 for the interaction). The ICM pigs had better feed efficiency (0.406, 0.364, and 0.380; g/g; P < 0.001) and lower carcass yield (76.6, 78.1, and 78.8%; P < 0.001) than SCM or IF. Carcasses from IF were leaner than carcasses from SCM with carcasses from ICM being intermediate (P < 0.01). Ham and loin (P < 0.001) yields were higher for IF than for ICM or SCM pigs. Intramuscular fat content was lower for IF than for SCM pigs with that of ICM pigs being intermediate (3.5 vs. 3.9 and 3.7%; P < 0.05). Cumulatively, crossbreds from Duroc sires had higher ADG (1.167 vs. 0.986 kg/d; P < 0.001) and average daily feed intake (3.07 vs. 2.56 kg/d; P < 0.001) and more intramuscular fat (P < 0.001) but less ham and loin yields (P < 0.01) than crossbreds from Pietrain sires. It is concluded that growth performance was better, but carcass yield lower, for ICM pigs than for SCM and IF. Intramuscular fat content in longissimus dorsi muscle was lower for IF than for SCM pigs with ICM pigs being intermediate. Crossbreds from Duroc sires grew faster and had more intramuscular fat but less ham yield than crossbreds from Pietrain sires. Therefore, ICM pigs should be preferred to SCM pigs, and Duroc crossbreds should be preferred to Pietrain crossbreds to produce carcasses destined to the production of primal cuts for the dry-cured industry. We conclude that immunocastration might be a sound alternative to surgical castration in pigs and that Tempo and Duroc might be better for the production of heavy pigs than Top York and Pietrain. The interactions reported between sex and genetic sire line, suggested that the benefits of immunocastration as an alternative to surgical castration might depend at least part on the sire line used. In any case, immunocastration is a good alternative to surgical castration for the production of carcasses destined to the dry-cured industry.

Influence of castration on growth performance and carcass and meat quality of heavy female pigs

The main objetive of this Doctoral Thesis was to study the influence of female castration and pig sex on growth performance and carcass and meat quality of white pigs slaughtered at different final weights. Three experiments (Exp.) were conducted. In Exp. 1, a total of 200 (Landrace * Large White dam x Pietrain * Large White sire) gilts of 50 ± 3 days of age (23.3 ± 1.47 kg BW) was used to investigate the effects of castration (intact females, IF vs. castrated feamles, CF) and slaughter weight (106 vs. 122 kg BW) on productive performance and carcass and meat quality. There were four experimental treatments arranged as a 2 x 2 factorial and 5 replicates of 10 pigs each per treatment. Half of the gilts were ovariectomized at 58 d of age (8 days after the beginning of the trial; 29.8 ± 1.64 kg BW) whereas the other half remained intact. Meat samples were taken at m. Longissimus thoracis at the level of the last rib and subcutaneous fat samples were taken at the tail insertion. For the entire experiment period, CF had higher BW gain (P<0.05) and backfat and m. Gluteus medius (GM) fat thickness (P<0.001) than IF. However, IF had higher loin and trimmed primal cut yields (P<0.05) than CF. Meat quality was similar for IF and CF but the proportion of linoleic acid in subcutaneous fat was higher (P<0.001) for IF. Pigs slaughtered at 122 kg BW had higher (P<0.001) feed intake and poorer feed efficiency than pigs slaughtered at 106 kg BW. An increase in slaughter weight (SW) improved (P<0.001) carcass yield but decreased (P<0.05) trimmed primal cut yield. Meat from females slaughtered at the heavier BW was redder (a*; P<0.001) and had more (P<0.01) intramuscular fat and less thawing (P<0.05) and cooking (P<0.10) loss than meat from females slaughtered at the lighter BW. Also, females slaughtered at 122 kg BW had less (P<0.01) linoleic acid content in the subcutaneous fat than pigs slaughtered at 106 kg BW. Castration of gilts and slaughtering at heavier BW might be useful practices for the production of heavy pigs destined to the dry cured industry in which a certain amount of fat in the carcass is required. In contrast, when the carcasses are destined to fresh meat production, IF slaughtered at 106 kg BW are a more efficient alternative. In Exp. 2, crossbred pigs (n=240) from Pietrain*Large White sires mated to Landrace*Large White dams with an average of 100 d of age (60.5 ± 2.3 kg) were used to investigate the effects of gender and slaughter weight (SW) on growth performance and carcass and meat quality characteristics. There were 6 treatments arranged factorially with 3 genders (IF vs. CF vs.castrated males, CM) and 2 SW (114 vs. 122 kg BW). Each of the 6 combinations of treatments was replicated 4 times and the experimental unit was a pen with 10 pigs. Castrated males and CF ate more feed, grew faster and had more carcass backfat depth and fat thickness at the GM muscle, but lower loin yield than IF (P<0.05). In addition, CF and CM had more intramuscular fat (P<0.05) and less linoleic acid content in the subcutaneous fat (P<0.01) than IF. Pigs slaughtered at 122 kg BW had lower ADG (P<0.05), poor gain-to-feed ratio (P<0.05), and more GM fat than pigs slaughtered at 114 kg BW (P < 0.05). It is concluded that CF and CM had similar productive performance and meat quality characteristics when slaughtered at the same age, and that the castration of females improved daily gains and increased weight and fat content of primal cuts with respect to IF. Therefore, castration of females is recommended in pigs destined to the dry-cured industry because of the beneficial effects on the quality of the primal cuts. In Exp. 3, the effects of gender and castration of females (IF vs. CF vs. CM) on performance and carcass and meat quality were studied in crossbred pigs (Landrace x Large White dams x Duroc sires) slaughtered at 119.2 (trial 1) or 131.6 (trial 2) kg BW. Intact females had better feed conversion and less carcass fat than CF and CM. Trimmed shoulder yield was higher for CM than for CF with IF being intermediate. Primal cut yield and meat quality, however were similar for all treatments. Proportion of linoleic acid in backfat was lower for CF than for IF or CM, and the differences were significant in pigs slaughtered witn 131.6 kg BW. The higher fat content and the fatty acid profile favour the use of CF and CM over IF for the production of heavy pigs destined to the dry-cured industry.

Effect of commercial starter cultures and native yeasts on ochratoxin a production by aspergillus westerdijkiae and penicillium nordicum in meat products

Processed meat products are of worldwide importance and, because of their intrinsic factors as well as the processing methods, they are highly prone to fungal and mycotoxin contamination. Ochratoxin A (OTA) is the most significant mycotoxin in processed meat products. Penicillium nordicum is considered to be responsible for OTA contamination of meat products, as it is highly adapted to salt and protein-rich matrices and is moderately psycrotrophic. However, another OTA-producing fungus, Aspergillus westerdijkiae, adapted to carbon-rich matrices such as cereals and coffee beans, has been recently associated with high levels of OTA in meat products. Several Lactic Acid Bacteria (LAB) and yeasts have been tested as biocontrol agents against P. nordicum growth and OTA production in meat products, with promising results, but none of the studies have considered A. westerdijkiae. The aim of this work was to evaluate in vitro the effect of a commercial starter culture used in sausage fermentation and four yeasts isolated from dry-cured sausage on these two OTA-producing fungi, both in terms of fungal growth and of OTA production, using different meat-based culture media as model systems. The mechanisms underlying the observed effect were also studied. For this purpose, C. krusei, C. zeylanoides, R. mucilaginosa, R. glutinis, a mix of these yeasts and the starter culture were co-inoculated with P. nordicum and A. westerdijkiae in industrial sausage, traditional sausage, and ham-based media, under conditions of water activity, salt concentration and temperature that mimic real conditions at beginning and end of sausage curing process. Fungal growth was determined by measuring colony diameter, and OTA production was quantified by HPLC-FLD after extraction with methanol. Yeasts where found to inhibit significantly the growth of both fungi. P. nordicum was unable to produce detectable OTA in both sausage-based media under any condition. In ham, yeasts reduced OTA production, while the starter culture significantly increased it. Unexpectedly, OTA production by A. westerdijkiae was significantly stimulated in all media tested by all microorganisms. Matrix has a significant effect on OTA production by P. nordicum, but not by A. westerdijkiae, for which only temperature showed to have effect. By testing the mechanisms of action by which starter culture and C. zeylanoides influenced fungal responses, we were able to determine that direct contact and simultaneous growth of test organisms were the mechanisms more significantly involved in the responses. In conclusion, ochratoxigenic fungi do not all respond to antagonistic microorganisms in the same way. The use of biocontrol agents with the intent of reducing fungal growth and mycotoxin production by one fungus can have unexpected effects on others, thus leading to unforeseen safety problems. Further experiments are recommended to properly understand the reasons behind the different effects of microorganisms, to ensure their safe as biocontrol agents.

Characterisation of "Catalão" and "Salsichão" Portuguese traditional sausages with salt reduction

The present study evaluated the effect of salt reduction on traditional dry-cured sausages' safety, quality and product acceptance, comprising physicochemical and microbiological parameters, biogenic amines, fatty acids, texture profile and sensory analysis. According to our results, salt content had a major effect on microbiological counts, although not compromising the products' safety. Marked differences were identified regarding biogenic amines, in particular for histamine, tyramine and cadaverine, which were detected in larger amounts in products with 3%. Moreover, significant differences in the fatty acids profile have also been found, but only in less abundant components such as linoleic, lauric and heneicosanoic acids. Texture profile analysis of low-salt products, revealed a decrease in hardness and chewiness, along with an increase in adhesiveness values. Sensory evaluations revealed that despite the less intense aroma, products with 3% salt, had a more balanced salt perception. Our results suggest that salt content may be reduced to 50% in dry-cured products, with the obvious health-related advantages.

Influence of glutaraldehyde priming on bond strength of an experimental adhesive system applied to wet and dry dentine

Objectives: This study tested the following null hypotheses: (1) there is no difference in resin-dentine bond strength when an experimental glutaraldehyde primer solution is added prior to bonding procedures and (2) there is no difference in resin-dentine bond strength when experimental glutaraldehyde/adhesive system is applied under dry or wet demineralized dentine conditions. Methods: Extracted human maxillary third molars were selected. Flat, mid-coronal dentine was exposed for bonding and four groups were formed. Two groups were designated for the dry and two for the wet dentine technique: DRY: (1) Group GD: acid etching + glutaraldehyde primer (primer A) + HEMA/ethanol primer (primer B)-under dried dentine + unfilled resin; (2) Group D: the same as GD, except for primer A application; WET: (3) Group GW: the same as GD, but primer B was applied under wet dentine condition; (4) Group W: the same as GW, except for primer A application. The bonding resin was light-cured and a resin core was built up on the adhesive layer. Teeth were then prepared for microtensile bond testing to evaluate bond strength. The data obtained were submitted to ANOVA and Tukey`s test (alpha = 0.05). Results: Glutaraldehyde primer application significantly improved resin-dentine bond strength. No significant difference was observed when the same experimental adhesive system was applied under either dry or wet dentine conditions. These results allow the first null hypothesis to be rejected and the second to be accepted. Conclusion: Glutaraldehyde may affect demineralized dentine properties leading to improved resin bonding to wet and dry substrates. (C) 2008 Elsevier Ltd. All rights reserved.

Stability of wet versus dry bonding with different solvent-based adhesives

Objective. To evaluate the effects of surface moisture (wet or dry) and storage (24h or 3 months) on the microtensile bond strength (BS) of resin/dentin bonds mediated by two water/ethanol based adhesives Single Bond, 3M-ESPE, (SB) and Opti Bond Solo Plus, Kerr, (OB), and two acetone-based adhesives, One Step, Bisco, (OS) and Prime&Bond NT, Caulk/Dentsply, (PB). Materials and methods. Flat dentin surfaces were polished with 600-grit SiC paper, etched with 35% phosphoric acid for 15 s and rinsed for 20 s. Half the surface was maintained moist and the other half was air-dried for 30 s. Each adhesive was applied simultaneously to both halves, left undisturbed for 30 s and light-cured. Four-mm resin build-ups were constructed incrementally. After storage in water at 37 degrees C for 24h, slabs were produced by transversal sectioning and trimmed to an hourglass shape (0.8 mm 2). Half of the specimens were tested in tension at 0.6 mm/min immediately after trimming and the other half after 3 months of water storage. Data were analyzed by two-way ANOVA and SNK for each material. Results. Both moisture and storage affected BS to dentin, and was material- dependent. Dry, bonding affected mostly the acetone-based adhesives. Larger reductions in bond strength were associated with dry bonding after 3 months of water storage. Significance. Wet bonding resulted in more stable bonds over 3 months of water storage for most of the materials tested. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effect of light energy density on conversion degree and hardness of dual-cured resin cement

This study evaluated the effect of different light energy densities on conversion degree (CD) and Knoop hardness number (KHN) of RelyX ARC (RLX) resin cement. After manipulation according to the manufacturer's instructions, RLX was inserted into a rubber mold (0.8 mm X 5 mm) and covered with a Mylar strip. The tip of the lightcuring unit (LCU) was positioned in contact with the Mylar surface. Quartz-tungsten-halogen (QTH) and light-emitting diode (LED) LCUs with light densities of 10, 20 and 30 J/cm2 were used to light-cure the specimens. After light curing, the specimens were stored dry in lightproof containers at 37°C. After 24 hours, the CD was analyzed by FT-Raman and, after an additional 24-hours, samples were submitted to Knoop hardness testing. The data of the CD (%) and KHN were submitted to two-way ANOVA and the Tukey's test (α=0.05). QTH and LED were effective light curing units. For QTH, there were no differences among the light energy densities for CD or KHN. For LED, there was a significant reduction in CD with the light energy density set at 10 J/cm2. KHN was not influenced by the lightcuring unit and by its light energy density. © Operative Dentistry.

Influence of plaster drying on the amount of residual monomer in heat-cured acrylic resins

Aim: To evaluate the influence of plaster condition, dry or not, on the amount of residual monomer in heat-cured acrylic resin. Methods: Thirty acrylic resin specimens (65×10×3 mm) were fabricated and randomly assigned to 5 groups (n=6). The evaluated resins were heat-cured acrylic resins by conventional or microwave polymerization techniques and the plaster was previously dried in microwave oven in two groups. Each specimen was individually immersed in a test tube containing methanol (7 days) for surface analysis. In the groups for which internal monomer was evaluated, the specimens were fragmented and the small fragments were weighed prior to immersion in methanol. The analysis was made by high performance liquid chromatography (HPLC). Data were analyzed by ANOVA and Tukey test (p<5%) Results: showed statistical differences among the groups. Conclusions: The previous plaster drying influenced the residual monomer amount showing a decrease of these levels.

The effect of curing light and chemical catalyst on the degree of conversion of two dual cured resin luting cements

The aim of this study was to evaluate the influence of different curing lights and chemical catalysts on the degree of conversion of resin luting cements. A total of 60 disk-shaped specimens of RelyX ARC or Panavia F of diameter 5 mm and thickness 0.5 mm were prepared and the respective chemical catalyst (Scotchbond Multi-Purpose Plus or ED Primer) was added. The specimens were light-cured using different curing units (an argon ion laser, an LED or a quartz-tungsten-halogen light) through shade A2 composite disks of diameter 10 mm and thickness 2 mm. After 24 h of dry storage at 37A degrees C, the degree of conversion of the resin luting cements was measured by Fourier-transformed infrared spectroscopy. For statistical analysis, ANOVA and the Tukey test were used, with p a parts per thousand currency signaEuro parts per thousand 0.05. Panavia F when used without catalyst and cured using the LED or the argon ion laser showed degree of conversion values significantly lower than RelyX ARC, with and without catalyst, and cured with any of the light sources. Therefore, the degree of conversion of Panavia F with ED Primer cured with the quartz-tungsten-halogen light was significantly different from that of RelyX ARC regardless of the use of the chemical catalyst and light curing source. In conclusion, RelyX ARC can be cured satisfactorily with the argon ion laser, LED or quartz-tungsten-halogen light with or without a chemical catalyst. To obtain a satisfactory degree of conversion, Panavia F luting cement should be used with ED Primer and cured with halogen light.

Characterization and Technological Features of Autochthonous Coagulase-Negative Staphylococci as Potential Starters for Portuguese Dry Fermented Sausages

The manufacture of dry fermented sausages is an important part of the meat industry in Southern Europeancountries. These products are usually produced in small shops from a mixture of pork, fat, salt, and condiments andare stuffed into natural casings. Meat sausages are slowly cured through spontaneous fermentation by autochthonousmicrobiota present in the raw materials or introduced during manufacturing. The aim of this work was to evaluate thetechnological and safety features of coagulase-negative staphylococci (CNS) isolated from Portuguese dry fermented meatsausages in order to select autochthonous starters. Isolates (n = 104) obtained from 2 small manufacturers were identifiedas Staphylococcus xylosus, Staphylococcus equorum, Staphylococcus saprophyticus,andStaphylococcus carnosus. Genomically diverseisolates (n = 82) were selected for further analysis to determine the ability to produce enzymes (for example, nitrate-reductases, proteases, lipases) and antibiotic susceptibility. Autochthonous CNS producing a wide range of enzymes andshowing low antibioresistance were selected as potential starters for future use in the production of dry fermented meatsausages.