Mass production of nitrifying bacterial consortia for the rapid establishment of nitrification in saline recirculating aquaculture systems

Two distinct nitrifying bacterial consortia, namely an ammonia oxidizing non-penaeid culture (AMO NPCU-1) and an ammonia oxidizing penaeid culture (AMOPCU-1), have been mass produced in a nitrifying bacterial consortia production unit (NBCPU). The consortia, maintained at 4 C were activated and cultured in a 2 l fermentor initially. At this stage the net biomass (0.105 and 0.112 g/l), maximum specific growth rate (0.112 and 0.105/h) and yield coefficients (1.315 and 2.08) were calculated respectively, for AMONPCU-1 and AMOPCU-1 on attaining stationary growth phase. Subsequently on mass production in a 200 l NBCPU under optimized culture conditions, the total amounts of NH4 ?–N removed by AMONPCU-1 and AMOPCU-1 were 1.948 and 1.242 g/l within 160 and 270 days, respectively. Total alkalinity reduction of 11.7–14.4 and 7.5–9.1 g/l were observed which led to the consumption of 78 and 62 g Na2CO3. The yield coefficient and biomass of AMONPCU-1 were 0.67 and 125.3 g/l and those of AMOPCU-1 were 1.23 and 165 g/l. The higher yield coefficient and growth rate of AMOPCU-1 suggest better energy conversion efficiency and higher CO2 fixation potential. Both of the consortia were dominated by Nitrosomonas-like organisms. The consortia may find application in the establishment of nitrification within marine and brackish water culture systems.

Growth rate and physical properties of Erythrina variegata with regard to dry matter production

Erythrina variegata grown from seeds showed a great deal of variation with respect to height, diameter, density of wood and dry matter production. Statistical analysis showed that the density of wood produced by any plant was not related to its growth rate, but dry matter production was associated with plant growth rate (height and diameter) that could lead to overall increased dry matter or biomass production.

Models, moulds and mass production: the mechanics of stylistic influence form the Mediterranean to Bactria

Classical Greek and Roman influence on the material culture of Central Asia and northwestern India is often considered in the abstract. This article attempts to examine the mechanisms of craft production and movement of artisans and objects which made such influence possible, through four case studies: (1) Mould-made ceramics in Hellenistic eastern Bactria; (2) Plaster casts used in the production of metalware from Begram; (3) Terracotta figurines and the moulds used to produce them, from various archaeological sites; and (4) Mass production of identical gold adornments in the nomadic tombs from Tillya Tepe. The implications of such techniques for our understanding of the development of Gandhāran art are also discussed.

Dry matter production of shoots and root density of two cultivars of Lablab purpureus (L.) Sweet

This experiment was conducted in green house conditions to evaluate the DM accumulation in the shoots and in the roots of two cultivars of Lablab purpureus (L.) Sweet. A 2x3 factorial (two cultivars and three evaluation dates) was conducted according to a randomized complete block design with four replications, being the cultivars Highworth and Rongai evaluated at 42, 56, and 70 days after seedling emergence (DASE). The results indicated that the cvs. Highworth and Rongai have the same pattern of DM accumulation in the shoots. In the upper layer of the soil (0-0.20 in) it was found 38.83% and 43.64% of the DM accumulated in the roots down to 2.00 in depth, in the cvs. Highworth and Rongai, respectively. In the deepest layer (1.80-2.00 in) it was found 3.02% and 1.5% of the DM accumulated in the roots of the cvs. Highworth and Rongai, respectively. The root density showed a striking decrease upper layer from the soil (0-0.2 m) down to the depth of 0.60 0.80 in (from 10.83 to 1.75 cm.cm(-3) in the cv. Highworth and from 10.76 to 1.28 cm.cm(-3) in the cv. Rongai). At the bottom layer (1.80-2.00 in) the root density values were 0.98 cm.cm(-3) and 0.59 cm.cm(-3), respectively for the cvs. Highworth and Rongai. The root/shoot ratios were similar in both cvs. and decreased from 42 to 70 DASE showing that the cvs. evaluated had the same dynamics of DM accumulation.

Production and quality of melons grown in two different substrates under soilless cultivation

This investigation was conducted at UNESP, Jaboticabal campus, São Paulo, Brazil, from March 8 to June 21, 1999, to evaluate net melon yield and fruit quality, using soilless culture. 'Bônus 2' and 'Mission' cultivars were grown in a substrate of ground quartz or thick sand, in a randomized block experimental design. Leaf and stem dry matter production, leaf size and soluble solids content of the fruit, of 'Bônus 2' were superior to 'Mission'. There was a significant interaction for the evaluated characteristics of fruit dry mass production and yield. The largest accumulation of fruit dry mass and yield of the 'Bônus 2' cultivar (61,325 kg/ha) was observed when a substrate of ground quartz was used, while the yield for the 'Mission' cultivar was higher in a substrate of thick sand (42,125 kg/ha).

Dry matter production of Tanzania grass as a function of agrometeorological variables

The objective of this work was to develop and validate linear regression models to estimate the production of dry matter by Tanzania grass (Megathyrsus maximus, cultivar Tanzania) as a function of agrometeorological variables. For this purpose, data on the growth of this forage grass from 2000 to 2005, under dry-field conditions in Sao Carlos, SP, Brazil, were correlated to the following climatic parameters: minimum and mean temperatures, degree-days, and potential and actual evapotranspiration. Simple linear regressions were performed between agrometeorological variables (independent) and the dry matter accumulation rate (dependent). The estimates were validated with independent data obtained in Sao Carlos and Piracicaba, SP, Brazil. The best statistical results in the development and validation of the models were obtained with the agrometeorological parameters that consider thermal and water availability effects together, such as actual evapotranspiration, accumulation of degree-days corrected by water availability, and the climatic growth index, based on average temperature, solar radiation, and water availability. These variables can be used in simulations and models to predict the production of Tanzania grass.

Architectural development and dry matter production in a multisite trial on single and multiaxis apple trees (Malus domestica Borkh) grafted on different rootstocks

In two Italian sites, multiaxis trees slightly reduced primary axis length and secondary axis length of newly grafted trees, and increased the number of secondary shoots. The total length, node production, and total dry matter gain were proportional to the number of axis. Growth of both primary and secondary shoots, and dry matter accumulation, have been found to be also well related to rootstock vigour. A great variability in axillary shoot production was recorded among different environments. Grafted trees had higher primary growth, secondary axis growth, and dry matter gain than chip budded trees. Stem water potential measured in the second year after grafting was not affected by rootstocks or number of leaders. Measurements performed in New Zealand (Hawke’s Bay) during the second year after grafting revealed that both final length and growth rate of primary and secondary axis were related to the rootstock rather than to the training system. Dwarfing rootstocks reduced the number of long vegetative shoots and increased the proportion of less vigorous shoots.