Aplicação de métodos estocásticos na gestão de custos de construção de condutas de saneamento

O trabalho apresentado centra-se na determinação dos custos de construção de condutas de pequenos e médios diâmetros em Polietileno de Alta Densidade (PEAD) para saneamento básico, tendo como base a metodologia descrita no livro Custos de Construção e Exploração – Volume 9 da série Gestão de Sistemas de Saneamento Básico, de Lencastre et al. (1994). Esta metodologia descrita no livro já referenciado, nos procedimentos de gestão de obra, e para tal foram estimados custos unitários de diversos conjuntos de trabalhos. Conforme Lencastre et al (1994), “esses conjuntos são referentes a movimentos de terras, tubagens, acessórios e respetivos órgãos de manobra, pavimentações e estaleiro, estando englobado na parte do estaleiro trabalhos acessórios correspondentes à obra.” Os custos foram obtidos analisando vários orçamentos de obras de saneamento, resultantes de concursos públicos de empreitadas recentemente realizados. Com vista a tornar a utilização desta metodologia numa ferramenta eficaz, foram organizadas folhas de cálculo que possibilitam obter estimativas realistas dos custos de execução de determinada obra em fases anteriores ao desenvolvimento do projeto, designadamente numa fase de preparação do plano diretor de um sistema ou numa fase de elaboração de estudos de viabilidade económico-financeiros, isto é, mesmo antes de existir qualquer pré-dimensionamento dos elementos do sistema. Outra técnica implementada para avaliar os dados de entrada foi a “Análise Robusta de Dados”, Pestana (1992). Esta metodologia permitiu analisar os dados mais detalhadamente antes de se formularem hipóteses para desenvolverem a análise de risco. A ideia principal é o exame bastante flexível dos dados, frequentemente antes mesmo de os comparar a um modelo probabilístico. Assim, e para um largo conjunto de dados, esta técnica possibilitou analisar a disparidade dos valores encontrados para os diversos trabalhos referenciados anteriormente. Com os dados recolhidos, e após o seu tratamento, passou-se à aplicação de uma metodologia de Análise de Risco, através da Simulação de Monte Carlo. Esta análise de risco é feita com recurso a uma ferramenta informática da Palisade, o @Risk, disponível no Departamento de Engenharia Civil. Esta técnica de análise quantitativa de risco permite traduzir a incerteza dos dados de entrada, representada através de distribuições probabilísticas que o software disponibiliza. Assim, para por em prática esta metodologia, recorreu-se às folhas de cálculo que foram realizadas seguindo a abordagem proposta em Lencastre et al (1994). A elaboração e a análise dessas estimativas poderão conduzir à tomada de decisões sobre a viabilidade da ou das obras a realizar, nomeadamente no que diz respeito aos aspetos económicos, permitindo uma análise de decisão fundamentada quanto à realização dos investimentos.

Essais sur des questions internationales en économie des ressources naturelles

Cette thèse s'articule autour de trois essais portant sur des questions internationales en économie des ressources naturelles. Le premier essai examine la production et l'échange des ressources non-renouvelables dans un modèle spatial et souligne le rôle de la superficie des pays et du coût des transports dans la détermination du sens de l'échange. Le deuxième essai considère le tarif d'extraction de la rente de rareté liée aux ressources naturelles non-renouvelables avec le modèle spatial développé dans premier essai. Le cadre spatial (plus général) permet de représenter des pays qui sont à la fois importateurs et producteurs de la ressource, ce qui n'est pas possible dans les modèles traditionnels de commerce international où les pays sont traités comme des points (sans dimension). Le troisième essai aborde la question des droits de propriétés sur les zones maritimes et examine l'allocation d'une population de pêcheurs entre les activités productives et non-productives dans une communauté côtière. Le premier chapitre propose un modèle spatial de commerce international des ressources non-renouvelables. Le cadre spatial considère explicitement la différence de taille géographique (superficie) entre les pays et permet ainsi de tenir compte du fait que les gisements naturels et leurs utilisateurs soient dispersés dans l'espace, même à l'intérieur d'un pays. En utilisant un modèle spatial à la Hotelling, nous examinons l'évolution dans le temps du sens de l'échange entre deux pays (ou régions) qui diffèrent du point de vue de leur technologie de production, de leur superficie et de leur dotation en gisement d'une ressource naturelle non-renouvelable. Le chapitre met en évidence le rôle de la taille géographique dans la détermination du sens de l'échange, à côté des explications traditionnelles que sont l'avantage comparatif et les dotations des facteurs. Notre analyse est fondamentalement différente des autres contributions dans la littérature sur le commerce international des ressources naturelles parce qu'elle souligne l'importance de la taille géographique et du coût de transport par rapport à d'autres facteurs dans la détermination des flux de ressource à l'équilibre. Le coût unitaire de transport joue un rôle capital pour déterminer si la différence de superficie entre les pays influence le sens de l'échange à l'équilibre plus que les autres facteurs. Le chapitre discute aussi du caractère régional des échanges qui a été observé pour certaines ressources telles que le minerai de fer et la bauxite. Le chapitre deux aborde la question de la répartition de la rente de rareté liée aux ressources naturelles non-renouvelables entre les pays producteurs et les pays consommateurs. Cette question a été abordée dans la littérature sous une hypothèse quelque peu restrictive. En effet, dans la plupart des travaux portant sur ce sujet le pays importateur est automatiquement considéré comme dépourvu de gisement et donc non producteur de la ressource. Pourtant la réalité est qu'il existe des ressources pour lesquelles un pays est à la fois producteur et importateur. Le cadre d'analyse de ce second essai est le modèle spatial développé dans le premier essai, qui permet justement qu'un pays puisse être à la fois importateur et producteur de la ressource. Le pays importateur détermine alors simultanément le tarif optimal et le taux d'extraction de son propre stock. Nous montrons que le tarif optimal croît au taux d'intérêt et de ce fait, ne crée aucune distorsion sur le sentier d'extraction de la ressource. Le tarif optimal permet de récupérer toute la rente lorsque le pays exportateur ne consomme pas la ressource. Néanmoins, la possibilité pour le pays exportateur de consommer une partie de son stock limite la capacité du pays importateur à récupérer la rente chez le pays exportateur. La présence de gisements de la ressource dans le pays importateur réduit la rente du pays exportateur et de ce fait renforce la capacité du pays importateur à récupérer la rente chez le pays exportateur. Le tarif initial est une fonction décroissante du stock de ressource dans le pays importateur. Cet essai aborde également la question de la cohérence dynamique du tarif obtenu avec la stratégie en boucle ouverte. Le troisième chapitre examine un problème d'allocation de l'effort entre les activités productives (par exemple la pêche) et les activités non productives (par exemple la piraterie maritime) dans une population de pêcheurs. La répartition de la population entre les activités de pêche et la piraterie est déterminée de façon endogène comme une conséquence du choix d'occupation. Nous établissons l'existence d'une multiplicité d'équilibres et mettons en évidence la possibilité d'une trappe de piraterie, c'est-à-dire un équilibre stable où une partie de la population est engagée dans les actes de piraterie. Le modèle permet d'expliquer l'augmentation significative des attaques de piraterie dans le Golfe d'Aden au cours des dernières années. Le chapitre discute aussi des différents mécanismes pour combattre la piraterie et souligne le rôle crucial des droits de propriété.

Uso de la Hibridación Genómica Comparativa-Array (HGC-a) en pacientes con retraso global del desarrollo y fenotipo particular. Revisión sistemática de la literatura

Introducción: la hibridación genómica comparativa en una técnica que permite la exploración de las anormalidades cromosómicas. Su utilidad en la aproximación de los pacientes con retraso global del desarrollo o fenotipo dismórfico, sin embargo, no ha sido explorada mediante una revisión sistemática de la literatura. Metodología: realizó una revisión sistemática de la literatura. Se incluyeron estudios controlados, cuasi-experimentales, de cohortes, de casos y controles, transversales y descriptivos publicados en idiomas inglés y español entre los años 2000 y 2013. Se realizó un análisis de la evidencia con un enfoque cualitativo y cuantitativo. Se realizó un análisis del riesgo de sesgo de los estudios incluidos. Resultados: se incluyeron 4 estudios que cumplieron con los criterios de inclusión. La prevalencia de alteraciones cromosómicas en los niños con retraso global del desarrollo fue de entre el 6 y 13%. El uso de la técnica permitió identificar alteraciones que no fueron detectadas mediante el cariotipo. Conclusiones: la hibridación genómica comparativa es una técnica útil en la aproximación diagnóstica de los niños con retraso global del desarrollo y del fenotipo dismórfico y permite una mayor detección de alteraciones comparada con el cariotipo.

“Financial alchemy” or a zero sum game? Real estate finance, securitisation and the UK property market

Following the US model, the UK has seen considerable innovation in the funding, finance and procurement of real estate in the last decade. In the growing CMBS market asset backed securitisations have included $2.25billion secured on the Broadgate office development and issues secured on Canary Wharf and the Trafford Centre regional mall. Major occupiers (retailer Sainsbury’s, retail bank Abbey National) have engaged in innovative sale & leaseback and outsourcing schemes. Strong claims are made concerning the benefits of such schemes – e.g. British Land were reported to have reduced their weighted cost of debt by 150bp as a result of the Broadgate issue. The paper reports preliminary findings from a project funded by the Corporation of London and the RICS Research Foundation examining a number of innovative schemes to identify, within a formal finance framework, sources of added value and hidden costs. The analysis indicates that many of the gains claimed conceal costs – in terms of market value of debt or flexibility of management – while others result from unusual firm or market conditions (for example utilising the UK long lease and the unusual shape of the yield curve). Nonetheless, there are real gains resulting from the innovations, reflecting arbitrage and institutional constraints in the direct (private) real estate market

A preliminary physicochemical, exergetic and economic study of hydrogen production utilizing glycerol

This work has as objective to demonstrate technical and economic viability of hydrogen production utilizing glycerol. The volume of this substance, which was initially produced by synthetic ways (from oil-derived products), has increased dramatically due mainly to biodiesel production through transesterification process which has glycerol as main residue. The surplus amount of glycerol has been generally utilized to feed poultry or as fuel in boilers, beyond other applications such as production of soaps, chemical products for food industry, explosives, and others. The difficulty to allocate this additional amount of glycerol has become it in an enormous environment problem, in contrary to the objective of biodiesel chain, which is to diminish environmental impact substituting oil and its derivatives, which release more emissions than biofuels, do not contribute to CO2-cycle and are not renewable sources. Beyond to utilize glycerol in combustion processes, this material could be utilized for hydrogen production. However, a small quantity of works (theoretical and experimental) and reports concerning this theme could be encountered. Firstly, the produced glycerol must be purified since non-reacted amounts of materials, inclusively catalysts, contribute to deactivate catalysts utilized in hydrogen production processes. The volume of non-reacted reactants and non-utilized catalysts during transesterification process could be reutilized. Various technologies of thermochemical generation of hydrogen that utilizes glycerol (and other fuels) were evaluated and the greatest performances and their conditions are encountered as soon as the most efficient technology of hydrogen production. Firstly, a physicochemical analysis must be performed. This step has as objective to evaluate the necessary amount of reactants to produce a determined volume of hydrogen and determine thermodynamic conditions (such as temperature and pressure) where the major performances of hydrogen production could be encountered. The calculations are based on the process where advance degrees are found and hence, fractions of products (especially hydrogen, however, CO2, CO, CH4 and solid carbon could be also encountered) are calculated. To produce 1 Nm3/h of gaseous hydrogen (necessary for a PEMFC - Proton Exchange Membrane Fuel Cell - containing an electric efficiency of about 40%, to generate 1 kWh), 0,558 kg/h of glycerol is necessary in global steam reforming, 0,978 kg/h of glycerol in partial oxidation and cracking processes, and 0,782 kg/h of glycerol in autothermal reforming process. The dry reforming process could not be performed to produce hydrogen utilizing glycerol, in contrary to the utilization of methane, ethanol, and other hydrocarbons. In this study, steam reforming process was preferred due mainly to higher efficiencies of production and the need of minor amount of glycerol as cited above. In the global steam reforming of glycerine, for one mole of glycerol, three moles of water are necessary to produce three moles of CO2 and seven moles of H2. The response reactions process was utilized to predict steam reforming process more accurately. In this mean, the production of solid carbon, CO, and CH4, beyond CO2 and hydrogen was predicted. However, traces of acetaldehyde (C2H2), ethylene (C2H4), ethylene glycol, acetone, and others were encountered in some experimental studies. The rates of determined products obviously depend on the adopted catalysts (and its physical and chemical properties) and thermodynamic conditions of hydrogen production. Eight reactions of steam reforming and cracking were predicted considering only the determined products. In the case of steam reforming at 600°C, the advance degree of this reactor could attain its maximum value, i.e., overall volume of reactants could be obtained whether this reaction is maintained at 1 atm. As soon as temperature of this reaction increases the advance degree also increase, in contrary to the pressure, where advance degree decrease as soon as pressure increase. The fact of temperature of reforming is relatively small, lower costs of installation could be attained, especially cheaper thermocouples and smaller amount of thermo insulators and materials for its assembling. Utilizing the response reactions process in steam reforming, the predicted volumes of products, for the production of 1 Nm3/h of H2 and thermodynamic conditions as cited previously, were 0,264 kg/h of CO (13% of molar fraction of reaction products), 0,038 kg/h of CH4 (3% of molar fraction), 0,028 kg/h of C (3% of molar fraction), and 0,623 kg/h of CO2 (20% of molar fraction). Through process of water-gas shift reactions (WGSR) an additional amount of hydrogen could be produced utilizing mainly the volumes of produced CO and CH4. The overall results (steam reforming plus WGSR) could be similar to global steam reforming. An attention must to be taking into account due to the possibility to produce an additional amount of CH4 (through methanation process) and solid carbon (through Boudouard process). The production of solid carbon must to be avoided because this reactant diminishes (filling the pores) and even deactivate active area of catalysts. To avoid solid carbon production, an additional amount of water is suggested. This method could be also utilized to diminish the volume of CO (through WGSR process) since this product is prejudicial for the activity of low temperature fuel cells (such as PEMFC). In some works, more three or even six moles of water are suggested. A net energy balance of studied hydrogen production processes (at 1 atm only) was developed. In this balance, low heat value of reactant and products and utilized energy for the process (heat supply) were cited. In the case of steam reforming utilizing response reactions, global steam reforming, and cracking processes, the maximum net energy was detected at 700°C. Partial oxidation and autothermal reforming obtained negative net energy in all cited temperatures despite to be exothermic reactions. For global steam reforming, the major value was 114 kJ/h. In the case of steam reforming, the highest value of net energy was detected in this temperature (-170 kJ/h). The major values were detected in the cracking process (up to 2586 kJ/h). The exergetic analysis has as objective, associated with physicochemical analysis, to determine conditions where reactions could be performed at higher efficiencies with lower losses. This study was performed through calculations of exergetic and rational efficiencies, and irreversibilities. In this analysis, as in the previously performed physicochemical analysis, conditions such as temperature of 600°C and pressure of 1 atm for global steam reforming process were suggested due to lower irreversibility and higher efficiencies. Subsequently, higher irreversibilities and lower efficiencies were detected in autothermal reforming, partial oxidation and cracking process. Comparing global reaction of steam reforming with more-accurate steam reforming, it was verified that efficiencies were diminished and irreversibilities were increased. These results could be altered with introduction of WGSR process. An economic analysis could be performed to evaluate the cost of generated hydrogen and determine means to diminish the costs. This analysis suggests an annual period of operation between 5000-7000 hours, interest rates of up to 20% per annum (considering Brazilian conditions), and pay-back of up to 20 years. Another considerations must to be take into account such as tariffs of utilized glycerol and electricity (to be utilized as heat source and (or) for own process as pumps, lamps, valves, and other devices), installation (estimated as US$ 15.000 for a plant of 1 Nm3/h) and maintenance cost. The adoption of emission trading schemes such as carbon credits could be performed since this is a process with potential of mitigates environment impact. Not considering credit carbons, the minor cost of calculated H2 was 0,16288 US$/kWh if glycerol is also utilized as heat sources and 0,17677 US$/kWh if electricity is utilized as heat sources. The range of considered tariff of glycerol was 0-0,1 US$/kWh (taking as basis LHV of H2) and the tariff of electricity is US$ 0,0867 US$/kWh, with demand cost of 12,49 US$/kW. The costs of electricity were obtained by Companhia Bandeirante, localized in São Paulo State. The differences among costs of hydrogen production utilizing glycerol and electricity as heat source was in a range between 0,3-5,8%. This technology in this moment is not mature. However, it allows the employment generation with the additional utilization of glycerol, especially with plants associated with biodiesel plants. The produced hydrogen and electricity could be utilized in own process, increasing its final performance.

Rentabilidade e risco da produção de milho safrinha geneticamente modificado na região de Guaíra-SP

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Rentabilidade e Risco da Produção de Milho Safrinha Geneticamente Modificado e Convencional na Região de Guaíra/sp

The objective of this study was to dimension the economic risks and returns on adopters of genetically modified (GM) maize in one of the major corn producing regions of São Paulo state. We performed analysis of variation of the quantities and prices of insecticides used, productivity gains, and variation in the price differentials between GM maize and conventional hybrids seeds, according to account to the maize prices oscillation during the period studied. The net benefits methodology was used, in other words, the economic gains minus the costs of GM technology under risk conditions were calculated. The net benefits was calculated as a function of four critical variables: 1) GM maize productivity; 2) costs of pest control; 3) maize price; 4) GM seeds cost. The probability distribution functions of these critical variables were estimated and included in the net benefit equation. Using the Monte Carlo simulation methodology, the following indicator sets were estimated: central tendency measurements, variability in net benefits (total benefits minus total costs), sensitivity analysis of the net benefits in relation to the critical variables, and finally, a map of the risk to GM technology adopters. These indicators allow one to design economic scenarios associated with their probability of occurring. The results showed probability of 85% to positive gains to the farmers who adopted the transgenic maize seed cultivation. The variable with the greatest impact on the farmers' income was the reduction in productivity loss, that means, as higher is the maize productivity, higher will be the net income. The average gain was US$ 137,41 (R$ 2.45/US$)per hectare with the adoption of transgenic maize seed when compared to conventional maize seed.

Does high speed rail compete fairly with other transportation modes? Madrid-Barcelona case study

Transportation modes produce many external costs such as congestion, accidents, and environmental impacts (pollution, noise and so on). From the microeconomic theory it is well known that in order to maximize social welfare, transportation modes should internalize the marginal costs they produce. Allocative efficiency is achieved when all transportation modes are priced at their social marginal cost. The objective of this research is to evaluate to what extent different passenger transport modes internalize their social marginal costs. This analysis is important since it affects the competitiveness of the different transport modes for a given OD pair. The case study analyzed is the corridor Madrid-Barcelona in Spain and the different transport modes have been considered (cars, buses, high-speed train and air). The research calculates the marginal social cost per user for each transportation mode, and it compares it with the average fare—allowing for the effect of discriminatory taxes—currently paid by the users. The external costs are calculated according to the guidelines established by the European Union. The gap between the marginal social cost and the price paid by users will provide the extra cost per passenger that each transport mode should have to pay for internalizing the external cost it produces. The research shows that external costs already produced by road and air transport modes are much higher than those produced by rail. However, the results show that road transport already internalizes every external costs it produces because users pay high fuel taxes. In other words, although rail transportation produces lower external costs, road transportation pays more than it should on the basis of the social marginal costs. The results of this work might be of help for Europ ean policy actions to be undertaken in the future.

A conceptual framework for evaluating traffic safety system measures.

National Highway Safety Bureau, Washington, D.C.

Die Kosten der erzieherischen Hilfen

Der Beitrag berechnet aus den Daten der Bundesstatistik für die Kinder- und Jugendhilfe für die begonnenen Hilfen zur Erziehung eines Jahres auf der Basis der durchschnittlichen Dauer der einzelnen Hilfearten die durchschnittlichen Kosten eines Falles je Hilfeart.

Impact of radiofrequency ablation for patients with varicose veins on the budget of the German statutory health insurance system

Objectives: In contrast to other countries, surgery still represents the common invasive treatment for varicose veins in Germany. However, radiofrequency ablation, e.g. ClosureFast, becomes more and more popular in other countries due to potential better results and reduced side effects. This treatment option may cause less follow-up costs and is a more convenient procedure for patients, which could justify an introduction in the statutory benefits catalogue. Therefore, we aim at calculating the budget impact of a general reimbursement of ClosureFast in Germany. Methods: To assess the budget impact of including ClosureFast in the German statutory benefits catalogue, we developed a multi-cohort Markov model and compared the costs of a “World with ClosureFast” with a “World without ClosureFast” over a time horizon of five years. To address the uncertainty of input parameters, we conducted three different types of sensitivity analysis (one-way, scenario, probabilistic). Results: In the Base Case scenario, the introduction of the ClosureFast system for the treatment of varicose veins saves costs of about 19.1 Mio. € over a time horizon of five years in Germany. However, the results scatter in the sensitivity analyses due to limited evidence of some key input parameters. Conclusions: Results of the budget impact analysis indicate that a general reimbursement of ClosureFast has the potential to be cost-saving in the German Statutory Health Insurance.

Modelo de avaliação da qualidade da água utilizando geoquímica e bioindicadores

Tese (doutorado)—Universidade de Brasília, Instituto de Geociências, Pós-Graduação em Geociências Aplicadas, 2015.

Regional IAM: analysis of risk-adjusted costs and benefits of climate policies

23 p.

Report : review of the literature : maintenance and rehabilitation costs for roads (Risk-based Analysis)

Realistic estimates of short- and long-term (strategic) budgets for maintenance and rehabilitation of road assessment management should consider the stochastic characteristics of asset conditions of the road networks so that the overall variability of road asset data conditions is taken into account. The probability theory has been used for assessing life-cycle costs for bridge infrastructures by Kong and Frangopol (2003), Zayed et.al. (2002), Kong and Frangopol (2003), Liu and Frangopol (2004), Noortwijk and Frangopol (2004), Novick (1993). Salem 2003 cited the importance of the collection and analysis of existing data on total costs for all life-cycle phases of existing infrastructure, including bridges, road etc., and the use of realistic methods for calculating the probable useful life of these infrastructures (Salem et. al. 2003). Zayed et. al. (2002) reported conflicting results in life-cycle cost analysis using deterministic and stochastic methods. Frangopol et. al. 2001 suggested that additional research was required to develop better life-cycle models and tools to quantify risks, and benefits associated with infrastructures. It is evident from the review of the literature that there is very limited information on the methodology that uses the stochastic characteristics of asset condition data for assessing budgets/costs for road maintenance and rehabilitation (Abaza 2002, Salem et. al. 2003, Zhao, et. al. 2004). Due to this limited information in the research literature, this report will describe and summarise the methodologies presented by each publication and also suggest a methodology for the current research project funded under the Cooperative Research Centre for Construction Innovation CRC CI project no 2003-029-C.

The consequences of substance use among gay and bisexual men : a consensual qualitative research analysis

- Background Substance use is common among gay/bisexual men and is associated with significant health risks (e.g. HIV transmission). The consequences of substance use, across the range of substances commonly used, have received little attention. The purpose of this study is to map participant’s beliefs about the effects of substance use to inform prevention, health promotion and clinical interventions. - Methods Participants were interviewed about experiences regarding their substance use and recruited through medical and sexual health clinics. Data were collected though a consumer panel and individual interviews. Responses regarding perceived consequences of substance use were coded using Consensual Qualitative Research (CQR) methodology. - Results Most participants reported lifetime use of alcohol, cannabis, stimulants and amyl nitrite, and recent alcohol and cannabis use. A wide range of themes were identified regarding participant’s thoughts, emotions and behaviours (including sexual behaviours) secondary to substance use, including: cognitive functioning, mood, social interaction, physical effects, sexual activity, sexual risk-taking, perception of sexual experience, arousal, sensation, relaxation, disinhibition, energy/activity level and numbing. Analyses indicated several consequences were consistent across substance types (e.g. cognitive impairment, enhanced mood), whereas others were highly specific to a given substance (e.g. heightened arousal post amyl nitrite use). - Conclusions Prevention and interventions need to consider the variety of effects of substance use in tailoring effective education programs to reduce harms. A diversity of consequences appear to have direct and indirect impacts on decision-making, sexual activity and risk-taking. Findings lend support for the role of specific beliefs (e.g. expectancies) related to substance use on risk-related cognitions, emotions and behaviours.