27 resultados para Corncob


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Thermophilic fungus Thermoascus aurantiacus (CBMAI 756) on solid-state fermentation using corncob as a nutrient source produces an enzyme pool with the potential to be used in bread making. In this paper, the use of this enzyme cocktail as a wheat bread improver was reported. Both products released by flour arabinoxylan degradation and bread quality were investigated. The main product released through enzyme activity after prolonged incubation was xylose indicating the presence of xylanase; however, a small amount of xylobiose and arabinose also confirmed the presence of xylosidase and α-L- arabinofuranosidase, respectively. Enzyme mixture in vitro mainly attacked water-unextractable arabinoxylan contributing to beneficial effect in bread making. The use of an optimal enzyme concentration (35 U xylanase/100 g of flour) increased specific volume (22%), reduced crumb firmness (25%), and reduced amylopectin retrogradation (17%) during bread storage. In conclusion, the enzyme cocktail produced by T. aurantiacus CBMAI 756 can improve wheat bread quality. © 2013 Elsevier Ltd.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The use of new substrates, which do not lead to extinction of important species such as xaxim, has gained special attention to the cultivation of ornamental and exotic plants. This study aimed to evaluate the potential of using corn cob as substrate for growing orchids. Thus, we used plants of Laelia pulcherrima grown in pine bark (control) and corn cob. We evaluated the development and physicochemical characteristics. We assessed also the benefit of fertilization for the development of this species in both substrates. The corn cob had higher nutrient contents and higher water retention capacity than pine bark, as well as pH and porosity more appropriate. Plant development of L. pulcherrima on the cob was comparable to that obtained with pine and the use of fertilizer promoted the best growing, especially when the substrate used was the cob. Thus, it is recommend to use the same for the cultivation of this orchid.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Several commodity feeds that are high in fiber are available that may substitute for corn cobs in a complete starting ration. This study was designed to evaluate the use of soyhulls and sunflower meal as substitutes for corncobs as a roughage source for newly weaned calves. One-hundred-and-fifty calves from the ISU Rhodes Research Farm were weaned, weighed, sorted by sex, and stratified by weight to eight pens. Two pens of each sex were assigned to one of two diet treatments. Calves fed the corncob diet consumed two pounds more feed dry matter, gained 1.5 pounds more per day, and were more efficient the first 14 days on feed. The soyhull diet was quite fine in particle size, and some feed particle separation occurred in the bunk. Some compensatory performance may have occurred with the soyhull diet the second 14 days on feed, although no statistical differences existed. This suggests that palatability, feed presentation, and bunk characteristics are important considerations in selecting roughage sources for complete starting diets for newly weaned calves.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Acid pretreatment of lignocellulosic biomass, required for bioethanol production, generates large amounts of by-products, such as lignin and hydrolyzed hemicellulose fractions, which have found so far very limited applications. In this work, we demonstrate how the recovered hemicellulose hydrolysis products can be effectively utilized as a precursor for the synthesis of functional carbon materials through hydrothermal carbonization (HTC). The morphology and chemical structure of the synthesized HTC carbons are thoroughly characterized to highlight their similarities with glucose-derived HTC carbons. Furthermore, two routes for introducing porosity within the HTC carbon structure are presented: i) silica nanoparticle hard-templating, which is shown to be a viable method for the synthesis of carbonaceous hollow spheres; and ii) KOH chemical activation. The synthesized activated carbons (ACs) show an extremely high porosity (pore volume≈1.0 cm3 g−1) mostly composed of micropores (90 % of total pore volume). Because of their favorable textural properties, the ACs are further tested as electrodes for supercapacitors, yielding very promising results (300 F g−1 at 250 mA g−1) and confirming the high suitability of KOH-activated HTC carbons derived from spruce and corncob hydrolysis products as materials for electric double layer supercapacitors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.