Subsurface drip irrigation emitter spacing effects on soil water redistribution, corn yield and water productivity

Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime

Corn yield response to weed and fall armyworm controls

The interference imposed the by weeds on corn decreases practically all vegetative characteristics. As consequence, the green ear and grain yield are also reduced. Losses due to the fall armyworm (Spodoptera frugiperda) attack can reduce corn grain yield up to 34%. In general, weed and insect control issues are addressed separately in research papers. Nevertheless, interaction between weeds and insects may exist. This study aimed to evaluate green ear and corn grain yield response to weed and fall armyworm control. A completely randomized block design with split-plots and five replicates was adopted. Corn cultivar AG 1051 was grown under weedy conditions or with control by hand hoeings performed at 20 and 40 days after planting. Fall armyworm control (applied to subplots) was performed with sprays of water (control), deltamethrin (5g active ingredient ha-1); neem oil, at 0.5% (diluted in water), and neem leaf extract at 5%. Each product was sprayed three times, at seven-day intervals, starting at the 7th day after planting, using 150 L ha-1 of the tank solution. Dry mass of the above-ground part, internode diameter, leaf length, leaf width, leaf area, green ear yield and grain yield of corn were reduced due to the lack of weed control. Fall armyworm control in the weeded plots did not influence green ear yield and grain yield, except green mass of marketable, husked ears, which was reduced when the caterpillar was not controlled. Without weed control, neem extracts and deltamethrin sprays provided highest yields of number and total weight of green ears with husks, number and weight of marketable ears with husks and number of marketable ears without husks. The best results for husked ear mass and for grain yield were obtained with neem extract and deltamethrin, respectively.

The effects of pigweed redroot (Amaranthus retoflexus) weed competition and its economic thresholds in corn (Zea mays)

The aim of this study was to determine the economic damage threshold of Pigweed redroot for corn regarding its density. An experiment was conducted at the Agriculture Research station of Islamic Azad University branch of Gonabad during 2006. The experiment was carried out as a factorial in a randomized complete block design with three replications. In the experiments, the factors included corn (var. 704) densities of 7.5, 8.5 and 9.5 plants m-2 and pigweed redroot densities of 0, 2, 4, 6 and 8 plants m-2. The increase in Pigweed redroot density, decrease in crop grain and biomass yield components such as ear length, ear diameter, number of grains per row, row number, grain number in ear, grain yield and biological yield of corn, decreased. Also, with an increase in corn density, the number of grain per rows, row number, grain yield and biological yield of corn increased. The economic thresholds density of Pigweed redroot was 0.09 to 0.13 plants m-2 in corn different densities, and increased with corn density increases.

Effect of different calcium sources on the antioxidant stability of tortilla chips from extruded and nixtamalized blue corn (Zea mays L.) flours

This research aimed to develop tortilla chips (TC) high in antioxidants from extruded and nixtamalized blue corn flours prepared with calcium hydroxide Ca(OH)2 and calcium lactate C6H10O6Ca. Tortilla chips were made with extruded flours [0.1% Ca(OH)2; 0.9% C6H10O6Ca; without calcium] and nixtamalized flours [1% Ca(OH)2; 2.95% C6H10O6Ca] using the frying process. Total anthocyanin, total phenolics content, antioxidant activity, color, texture, and oil content were determined. The color of tortilla chips from extruded flours (TCEF) showed high values of the parameters a* and b* indicating a reduction in the blue color. These color parameters were significantly different from those observed in tortilla chips from nixtamalized flours (TCNF), which tended to be more blue. The TCEF retained 15% anthocyanins, 34% phenolics, and 54% antioxidant activity. Pearson's correlation analysis indicated that anthocyanins and phenolics correlated significantly with antioxidant activity and color. TCEF with both calcium sources showed higher fracturability compared with that of TCNF. Oil absorption showed an opposite effect, with lower oil content in TCEF. Nixtamalization and extrusion with C6H10O6Ca resulted in flours and TC high in anthocyanins and antioxidant activity, representing an alternative production process for corn snack high in antioxidants.

Plantability and moisture content of naked and pelleted seeds of supersweet (Sh2) corn during cold storage conditions

The supersweet (Sh2) corn seeds have a thin tegument and an irregular shape, which hinder the sowing procedure. As a function of those factors, the significance of using the pelleting process to improve sowing and standardize the stand of plants in the field without the need of thinning within the row is emphasized. Although this technique has already been known for many years, little has been studied on the effect of such procedure on the plantability and on the moisture content of the supersweet corn seeds. Therefore, this research work aimed at evaluating the effects of pelleting on the moisture content of the seeds along the storing process, on the occurrence of gaps on seed deposition and on the dropping of double seeds, with the aid of a testing seeder. Other physical attributes of seeds and pellets were also evaluated through tests of fragmentation, screen retention, mass of a thousand seeds and apparent volume. Results have shown an increase on the mass and on the volume of the pelleted seeds that presented highly resistance to cracks and breaking. The pelleting was efficient on the reduction of gaps and on the deposition of double seeds at sowing, thus providing highly satisfactory results for these attributes. An increase on the seed moisture content was also observed as a function of storage with a significant reduction on this factor after the pelleting procedure. Results allow concluding that the pelleting process reduces seed moisture content and improves plantability, positively affecting the efficiency of the sowing process.

Dielectric Studies of Corn Syrup for Applications in Microwave Breast Imaging

Permittivity and conductivity studies of corn syrup in various concentrations are performed using coaxial cavity perturbation technique over a frequency range of 250 MHz–3000 MHz. The results are utilized to estimate relaxation time and dipole moments of the samples. The stability of the material over the variations of time is studied. The measured specific absorption rate of the material complies with the microwave power absorption rate of biological tissues. This suggests the feasibility of using corn syrup as a suitable, cost effective coupling medium for microwave breast imaging. The material can also be used as an efficient breast phantom in microwave breast imaging studies.

Subsurface drip irrigation emitter spacing effects on soil water redistribution, corn yield and water productivity

Emitter spacings of 0.3 to 0.6 m are commonly used for subsurface drip irrigation (SDI) of corn on the deep, silt loam soils of the U.S. Great Plains. Subsurface drip irrigation emitter spacings of 0.3, 0.6, 0.9 and 1.2 m were examined for the resulting differences in soil water redistribution, corn grain yield, yield components, seasonal water use, and water productivity in a 4‐year field study (2005 through 2008) at the Kansas State University Northwest Research‐Extension Center, Colby, Kansas. The results indicate that there is increased preferential water movement along the dripline (parallel) as compared to perpendicular to the dripline and that this phenomenon partially compensates for wider emitter spacings in terms of soil water redistribution. Corn yield and water productivity (WP) were not significantly affected by the emitter spacing with application of a full irrigation regime

Potential cost and environmental impact of feeding high-oil corn to poultry in Brazil

The objective of the study was to evaluate the cost and environmental impact of replacing traditional corn, which is the main ingredient in poultry diets, with a high-oil corn (HOC) variety. Using linear programming, diets were formulated with either traditional corn or HOC. The results indicate that HOC-based diets cost up to $11.38/tonne less than traditional corn-based diets. Using HOC rather than traditional corn in diets has the potential to reduce the annual nitrogen excreted to the environment from broilers and broiler breeders in Brazil by 6.44 Mtonnes. In addition, there is the potential to reduce P excretion by 4.52 Mtonnes/yr, because the need to supplement diets with inorganic P sources, such as dicalcium phosphate, is much lower with HOC-based diets. We estimate that 28.5 Mtonnes of dicalcium phosphate can be saved annually using HOC in Brazilian poultry diets. The literature suggests that replacing traditional corn with HOC does not affect bird metabolism, while positive impacts on growth rate have been recorded. Therefore, substituting traditional corn with HOC has cost and environmental benefits for the Brazilian poultry industry without compromising productivity.

Fatty acid composition of intramuscular fat from Nellore steers fed dry or high moisture corn and calcium salts of fatty acids

The purpose of this work was to evaluate the fatty acid composition of the Longissimus muscle from carcasses of Nellore steers fed diets with calcium salts of fatty acids (CSFA) and high moisture corn. Forty eight steers were fed during 70 days four diets containing dry corn (DC), high moisture corn (HM). dry corn plus CSFA (DC-CSFA) or high moisture corn plus CSFA (HM-CSFA). Fatty acid composition of the Longissimus muscle was determined by gas chromatography. Corn type had no effect on the ether extract percentage and in the content of the majority of the fatty acids, although steers fed HMC showed higher levels of polyunsaturated fatty acids and polyunsaturated/saturated ratio. Feeding CSFA increased ether extract percentage but had no effect on total of saturated, unsaturated and saturated: unsaturated ratio. Both high moisture corn and calcium salts of fatty acids increased CIA (cis9, trans11) and total CIA concentrations in intramuscular fat (C) 2008 Elsevier B.V. All rights reserved.

Research on Candida dubliniensis in a Brazilian yeast collection obtained from cardiac transplant, tuberculosis, and HIV-positive patients, and evaluation of phenotypic tests using agar screening methods

The aim of this study was to research Candida dubliniensis among isolates present in a Brazilian yeast collection and to evaluate the main phenotypic methods for discrimination between C. albicans and C. dubliniensis from oral cavity. A total of 200 isolates, presumptively identified as C. albicans or C. dubliniensis obtained from heart transplant patients under immunosuppressive therapy, tuberculosis patients under antibiotic therapy, HIV-positive patients under antiretroviral therapy, and healthy subjects, were analyzed using the following phenotypic tests: formation and structural arrangement of chlamydospores on corn meal agar, casein agar, tobacco agar, and sunflower seed agar; growth at 45 degrees C; and germ tube formation. All strains were analyzed by polymerase chain reaction (PCR). In a preliminary screen for C. dubliniensis, 48 of the 200 isolates on corn meal agar, 30 of the 200 on casein agar, 16 of the 200 on tobacco agar, and 15 of the 200 on sunflower seed agar produced chlamydoconidia; 27 of the 200 isolates showed no or poor growth at 45 degrees C. All isolates were positive for germ tube formation. These isolates were considered suggestive of C. dubliniensis. All of them were subjected to PCR analysis using C. dubliniensis-specific primers. C. dubliniensis isolates were not found. C. dubliniensis isolates were not recovered in this study done with immunocompromised patients. Sunflower seed agar was the medium with the smallest number of isolates of C. albicans suggestive of C. dubliniensis. None of the phenotypic methods was 100% effective for discrimination between C. albicans and C. dubliniensis. (C) 2011 Elsevier Inc. All rights reserved.

Molecular characterization and fumonisin production by Fusarium verticillioides isolated from corn grains of different geographic origins in Brazil

Gibberella moniliformis is most commonly associated with maize worldwide and produces high levels of fumonisins, some of the most agriculturally important mycotoxins. Studies demonstrate that molecular methods can be helpful for a rapid identification of Fusarium species and their levels of toxin production. The purpose of this research was to apply molecular methods (AFLP, TEF-1 alpha partial gene sequencing and PCR based on MAT alleles) for the identification of Fusarium species isolated from Brazilian corn and to verify if real time RT-PCR technique based on FUM1 and FUM19 genes is appropriated to estimate fumonisins B(1) and B(2) production levels. Among the isolated strains, 96 were identified as Fusarium verricillioides, and four as other Fusarium species. Concordant phylogenies were obtained by AFLP and TEF-1 alpha sequencing, permitting the classification of the different species into distinct clades. Concerning MAT alleles, 70% of the F. verricillioides isolates carried the MAT-1 and 30% MAT-2. A significant correlation was observed between the expression of the genes and toxin production r=0.95 and r=0.79 (correlation of FUM1 with FB(1) and FB(2), respectively, P < 0.0001): r=0.93 and r =0.78 (correlation of FUM19 with FB(1) and FB(2). respectively, P < 0.0001). Molecular methods used in this study were found to be useful for the rapid identification of Fusarium species. The high and significant correlation between FUM1 and FUM19 expression and fumonisins production suggests that real time RT-PCR is suitable for studies considering the influence of abiotic and biotic factors on expression of these genes. This is the first report concerning the expression of fumonisin biosynthetic genes in Fusarium strains isolated from Brazilian agricultural commodity. (c) 2010 Elsevier B.V. All rights reserved.

Plantability and moisture content of naked and pelleted seeds of supersweet (Sh2) corn during cold storage conditions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Electrical conductivity testing of corn seeds as influenced by temperature and period of storage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aluminum in corn plants: influence on growth and morpho-anatomy of root and leaf

A toxicidade do alumínio (Al) é um dos fatores mais limitantes para a produtividade. Esta pesquisa foi realizada para avaliar a influência do Al, em solução nutritiva, na altura de plantas, no peso da matéria seca e nas alterações morfoanatômicas de raízes e folhas de milho (Zea mays L.). O experimento foi conduzido em casa de vegetação com tratamentos constituídos de cinco doses de Al (0; 25; 75; 150; e 300 µmol L-1) e seis repetições. As soluções foram constantemente aeradas e o pH foi ajustado a 4,3, inicialmente. A matéria seca da parte aérea e das raízes e a altura das plantas diminuíram significativamente com o aumento da concentração de Al. As raízes de plantas de milho cultivadas em soluções com Al tiveram seu crescimento inibido e apresentaram menos raízes laterais e desenvolvimento do sistema radicular inferior, em comparação com as das plantas-controle. As folhas das plantas crescidas em soluções que continham 75 e 300 µmol L-1 de Al não apresentaram muita diferença anatômica em relação às das plantas-controle. A bainha da folha das plantas exposta ao Al apresentou epiderme uniestratificada revestida por uma fina camada de cutícula e as células da epiderme e do córtex foram as que menos se desenvolveram. No feixe vascular, o metaxilema e protoxilema não tinham paredes secundárias, e o diâmetro de ambos foi muito menor quando comparado com os das plantas-controle.

Research on Candida dubliniensis in a Brazilian yeast collection obtained from cardiac transplant, tuberculosis, and HIV-positive patients, and evaluation of phenotypic tests using agar screening methods

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)