A contribution for developing more efficient dynamic modelling algorithms of parallel robots

Parallel kinematic structures are considered very adequate architectures for positioning and orienti ng the tools of robotic mechanisms. However, developing dynamic models for this kind of systems is sometimes a difficult task. In fact, the direct application of traditional methods of robotics, for modelling and analysing such systems, usually does not lead to efficient and systematic algorithms. This work addre sses this issue: to present a modular approach to generate the dynamic model and through some convenient modifications, how we can make these methods more applicable to parallel structures as well. Kane’s formulati on to obtain the dynamic equations is shown to be one of the easiest ways to deal with redundant coordinates and kinematic constraints, so that a suitable c hoice of a set of coordinates allows the remaining of the modelling procedure to be computer aided. The advantages of this approach are discussed in the modelling of a 3-dof parallel asymmetric mechanisms.

Singularity-Free Fully-Isotropic Translational Parallel Manipulators

Parallel mechanisms show desirable characteristics such as a large payload to robot weight ratio, considerable stiffness, low inertia and high dynamic performances. In particular, parallel manipulators with fewer than six degrees of freedom have recently attracted researchers’ attention, as their employ may prove valuable in those applications in which a higher mobility is uncalled-for. The attention of this dissertation is focused on translational parallel manipulators (TPMs), that is on parallel manipulators whose output link (platform) is provided with a pure translational motion with respect to the frame. The first part deals with the general problem of the topological synthesis and classification of TPMs, that is it identifies the architectures that TPM legs must possess for the platform to be able to freely translate in space without altering its orientation. The second part studies both constraint and direct singularities of TPMs. In particular, special families of fully-isotropic mechanisms are identified. Such manipulators exhibit outstanding properties, as they are free from singularities and show a constant orthogonal Jacobian matrix throughout their workspace. As a consequence, both the direct and the inverse position problems are linear and the kinematic analysis proves straightforward.

New mechanisms for modelling the motion of the human ankle complex

The relevance of human joint models was shown in the literature. In particular, the great importance of models for the joint passive motion simulation (i.e. motion under virtually unloaded conditions) was outlined. They clarify the role played by the principal anatomical structures of the articulation, enhancing the comprehension of surgical treatments, and in particular the design of total ankle replacement and ligament reconstruction. Equivalent rigid link mechanisms proved to be an efficient tool for an accurate simulation of the joint passive motion. This thesis focuses on the ankle complex (i.e. the anatomical structure composed of the tibiotalar and the subtalar joints), which has a considerable role in human locomotion. The lack of interpreting models of this articulation and the poor results of total ankle replacement arthroplasty have strongly suggested devising new mathematical models capable of reproducing the restraining function of each structure of the joint and of replicating the relative motion of the bones which constitute the joint itself. In this contest, novel equivalent mechanisms are proposed for modelling the ankle passive motion. Their geometry is based on the joint’s anatomical structures. In particular, the role of the main ligaments of the articulation is investigated under passive conditions by means of nine 5-5 fully parallel mechanisms. Based on this investigation, a one-DOF spatial mechanism is developed for modelling the passive motion of the lower leg. The model considers many passive structures constituting the articulation, overcoming the limitations of previous models which took into account few anatomical elements of the ankle complex. All the models have been identified from experimental data by means of optimization procedure. Then, the simulated motions have been compared to the experimental one, in order to show the efficiency of the approach and thus to deduce the role of each anatomical structure in the ankle kinematic behavior.

Time-resolved fluorescence studies on covalently linked porphyrin�nitroarene complexes. Conformational control of photoinduced electron transfer reactions

Time-resolved fluorescence studies were carried out on a series of free-base and zinc(II) derivatives of meso-tetraphenylporphyrins covalently linked to either 1,3-dinitrobenzene (DNB) or 1,3,5-trinitrobenzene (TNB) acceptor units. These acceptor units were linked at different sites (at the ortho, meta or para positions of one of the phenyl groups of meso-tetraphenylporphyrin) to the donor porphyrins such that the resulting isomeric intramolecular donor-acceptor complexes exhibit different centre-to-centre (ctc) distances and relative orientations. Biexponential fluorescence decay profiles observed for several of these covalently linked complexes were rationalized in terms of the presence of ''closed'' and ''extended'' conformers. Detailed analyses of the fluorescence decay data have provided a comprehensive understanding of the photoinduced electron transfer (PET) reactions occurring in systems containing zinc(II) porphyrin donors. It is observed that although DNB-linked zinc(II) complexes follow the trends predicted for the efficiency of PET with respect to donor-acceptor distance, the TNB-linked zinc(II) porphyrins exhibit a behaviour which is dictated by steric effects. Similarly, although the thermodynamic criteria predict a greater efficiency of charge separation in TNB-linked complexes compared with DNB-linked complexes, the reverse trend observed has been attributed to orientational effects. In the complexes containing free-base porphyrin donors, PET is expected to be less efficient from a thermodynamic viewpoint. In a few of these cases, fluorescence quenching seems to occur by parallel mechanisms other than PET.

Análisis Dinámico de mecanismos paralelos con requisitos de diseño mecatrónico

[ES]El objetivo del presente TFG es el Análisis Dinámico de mecanismos paralelos según las necesidades de la mecatrónica. La mecatrónica requiere expresiones explícitas de las fuerzas motoras que sólo dependen de las propias posiciones, velocidades y aceleraciones en los accionamientos. Ello requiere métodos avanzados de la mecánica analítica de sólido rígido. Concretamente se han desarrollado la ecuación de Lagrange modificada (según [11]) y la ecuación de Boltzmann-Hamel modificada, siendo esta última una aportación de este TFG. Como aplicación práctica se ha programado un modelo mecatrónico para un manipulador paralelo 5R y se ha optimizado el diseño de una Multi Axis Simulation Table 3PRS.

平面运动的串联测量方法研究及其与并联方法的比较

提出了用于测量平面运动位姿的三自由度串联和并联测量方法,介绍了串联和并联测量方法的测量原理.通过建立串联测量方法的误差模型,得出了几何误差源与原始测量参数的映射关系和对末端位姿误差的影响情况,得到了这种方法的精度分析结果.仿真结果和试验数据证明了分析的正确性.同时,从几何误差源的产生和测量运动特性等方面对串联和并联测量方法进行了比较.

Traitement vocal et vieillissement normal : apports comportementaux et neurofonctionnels

La voix est tout sauf un stimulus auditif ordinaire. Pour cause, elle prend son importance de manière très précoce chez l’Homme lorsque, dans l’environnement amniotique, le fœtus entend pour la toute première fois la voix de sa mère. C’est en quelque sorte par l’intermédiaire de cette voix que les premiers contacts avec le monde extérieur, mais également avec l’Autre, s’effectuent. Le statut particulier de la voix humaine perdure au fil du développement, devenant plus tard le principal médium véhiculant le langage oral, si significatif pour l’Homme. En parallèle, et de manière tout aussi adaptative, elle permet la transmission d’informations non langagières renseignant sur l’identité, l’état émotionnel mais également le statut social de chaque individu. C’est ainsi que simplement en entendant la voix d’une personne inconnue, il est généralement possible d’en extrapoler son âge, son genre, mais également d’avoir une idée assez précise de l’état émotionnel dans lequel elle se trouve. Les capacités permettant d’extraire de la voix les divers éléments informationnels qu’elle contient ne seraient toutefois pas stables au fil du temps. Ainsi, le vieillissement normal semble associé à des difficultés de traitement des informations vocales de nature langagière, mais également non langagière. De nombreuses études se sont intéressées au déclin des capacités de traitement du discours avec l’âge. Beaucoup moins de travaux ont cependant considéré les conséquences du vieillissement sur le domaine paralinguistique et, lorsque des travaux s’y sont attardés, c’est essentiellement la sphère affective qui a été investiguée. En raison de ce peu d’études, mais également de leur focus portant spécifiquement sur la sphère émotionnelle, il est extrêmement ardu de généraliser les résultats obtenus au traitement vocal général. La présente thèse s’est donc intéressée aux capacités de traitement de la voix dans le vieillissement normal. La première étude de cette thèse (Article 1) avait pour objectif d’évaluer l’impact du vieillissement normal sur les capacités comportementales de traitement paralinguistique vocal non émotionnel. Pour ce faire, une batterie informatisée composée de quatre tâches a été élaborée : la batterie d’évaluation de la perception vocale (Batterie EPV; tâches de catégorisation de genre, de discrimination de sources sonores, adaptative de discrimination et de mémorisation). Cette batterie permettait de comparer les performances d’adultes jeunes et âgés lors du traitement de stimuli vocaux et non vocaux, mais également lors du traitement de divers stimuli vocaux. Cette première étude met en évidence, pour trois des quatre tâches comportementales, des performances inférieures chez les adultes âgés et ce, malgré le contrôle statistique des contributions du déclin auditif et cognitif. Pour les aînés, le traitement de stimuli vocaux, en comparaison au traitement de stimuli non vocaux, n’était toutefois pas systématiquement inférieur à celui des jeunes adultes. Sans que les performances ne puissent être prédites par la mesure cognitive utilisée comme covariable (performances au MoCA), il appert que les demandes cognitives inhérentes aux tâches participent à ces différences intergroupes. Le second article de ce travail visait quant à lui à explorer à l’aide de l’imagerie par résonnance magnétique fonctionnelle (IRMf), l’influence du vieillissement normal sur les réseaux neuronaux sous-tendant le traitement de l’information vocale, une telle investigation n’ayant jamais été effectuée auparavant. Pour ce faire, une tâche d’écoute passive (permettant le contraste de blocs de sons vocaux et non vocaux) ainsi qu’une tâche adaptative de discrimination ont été utilisées. La tâche adaptative, basée sur une type de protocole psycoacoustique « up-down », assurait l’obtention de niveau de performance équivalent entre les deux groupes, une condition nécessaire pour la comparaison de groupe au niveau neurofonctionnel. La comparaison des adultes jeunes et âgés n’a mis en évidence aucune disparité quant au recrutement des aires répondant préférentiellement à la voix : les aires vocales temporales (AVT). Ce résultat suggère que l’âge n’affecte pas la mobilisation des aires spécialisées dans le traitement de la voix. Néanmoins, à l’extérieur des AVT et chez les aînés, le sous recrutement d’une portion du cortex auditif a été observé, en parallèle au recrutement additionnel de régions pariétale, temporale et frontale (Article 2 – Étude 1). Lors de la réalisation d’une tâche adaptative de discrimination, contrairement à ce qui était attendu, les seuils de discrimination des deux groupes d’âges étaient comparables. Pour effectuer la tâche, les participants âgés ont cependant recruté un réseau neuronal plus étendu que celui des jeunes adultes, et pour les aînés, l’activation additionnelle de régions frontale et temporale sous-tendaient la réalisation de la tâche (Article 2 - Étude 2). Les données comportementales présentées dans cette thèse suggèrent que l’effet délétère que semble avoir le vieillissement normal sur les capacités de traitement paralinguistique vocal affectif est également retrouvé lors du traitement d’informations vocales émotionnellement neutres. En parallèle, la mise en place de phénomènes de plasticité cérébrale est objectivée. Ces derniers ne toucheraient cependant pas les réseaux spécialisés dans le traitement de la voix, qui seraient recrutés de manière comparable par les adultes jeunes et âgés. Néanmoins, la tâche d’écoute passive a mis en évidence la présence, chez les aînés, du recrutement sous-optimal d’une portion du cortex auditif (gyrus temporal transverse). En parallèle, et ce pour les deux tâches, des réseaux neuronaux surnuméraires étaient sollicitées par les adultes âgés, permettant potentiellement d’assurer, chez les ainés, le maintien de performances adéquates.

Virtual Model Control of a Hexapod Walking Robot

Since robots are typically designed with an individual actuator at each joint, the control of these systems is often difficult and non-intuitive. This thesis explains a more intuitive control scheme called Virtual Model Control. This thesis also demonstrates the simplicity and ease of this control method by using it to control a simulated walking hexapod. Virtual Model Control uses imagined mechanical components to create virtual forces, which are applied through the joint torques of real actuators. This method produces a straightforward means of controlling joint torques to produce a desired robot behavior. Due to the intuitive nature of this control scheme, the design of a virtual model controller is similar to the design of a controller with basic mechanical components. The ease of this control scheme facilitates the use of a high level control system which can be used above the low level virtual model controllers to modulate the parameters of the imaginary mechanical components. In order to apply Virtual Model Control to parallel mechanisms, a solution to the force distribution problem is required. This thesis uses an extension of Gardner`s Partitioned Force Control method which allows for the specification of constrained degrees of freedom. This virtual model control technique was applied to a simulated hexapod robot. Although the hexapod is a highly non-linear, parallel mechanism, the virtual models allowed text-book control solutions to be used while the robot was walking. Using a simple linear control law, the robot walked while simultaneously balancing a pendulum and tracking an object.

ADHERENS JUNCTIONS AND THE ACTOMYOSIN NETWORK REGULATE ORGAN GROWTH BY MODULATING HIPPO PATHWAY ACTIVITY IN DROSOPHILA

Adherens junctions (AJs) and basolateral modules are important for the establishment and maintenance of apico-basal polarity. Loss of AJs and basolateral module members lead to tumor formation, as well as poor prognosis for metastasis. Recently, in mammalian studies it has been shown that loss of either AJ or basolateral module members deregulate Yorkie activity, the downstream transcriptional effector of the Hippo pathway. Importantly, it is unclear if AJ and basolateral components act through the same or parallel mechanisms to regulate Yorkie activity. Here, we dissect how loss of AJ and basolateral components affects Hippo signaling in Drosophila. Surprisingly, while scrib knock-down tissue displays increased reporter activity autonomously, α-cat knock-down tissue shows a cell autonomous decrease and a cell non-autonomous increase of Hippo reporter activity. We provided several lines of evidence to show the differential regulation in polarity protein localizations and oncogenic cooperative overgrowth by AJs and basolateral complexes. Finally, we show that Hippo pathway activity is induced in α-cat and scrib double knocked-down tissue. Taken together, our results provide evidence to show that basolateral modules and AJs act in parallel to modulate Hippo pathway activity. Non-muscle myosin II is an actomyosin component that interacts with the actin. Non-muscle myosin II also interacts with lgl, though the function of this interaction is not clear. Our lab demonstrated that modulating F-actin regulates Hippo pathway activity, and lgl also has been described as a Hippo pathway regulator. Therefore we suspect that myosin II is also involved in Hippo pathway regulation. We first characterized non-muscle Myosin II as a novel tumor suppressor gene by affecting Hippo pathway activity. Upstream regulators of Myosin II, members in the Rho signaling pathway, also displayed similar phenotypes as the Myosin II knock-down tissues. Apoptosis is also induced in myosin II knock-down tissues, however, blocking cell death does not affect myosin II knock-down induced Hippo activation. Our data suggested hyperactivating myosin II induced F-actin accumulation so therefore induces Hippo target activation. Unexpectedly, we also observed that reducing F-actin activity induced Hippo target activation in vivo. These controversial data indicated that actomyosin may regulate the Hippo pathway through multiple mechanisms.

Avaliação do erro estático da ferramenta de uma máquina fresadora com arquitetura paralela.

Os mecanismos amplamente utilizados em aplicações industriais são de tipo serial, porém há algum tempo vem sendo desenvolvidos estudos sobre as vantagens que os mecanismos de arquitetura paralela oferecem em contraposição com os seriais. Rigidez, precisão, altas frequências naturais e velocidade são algumas características que os mecanismos paralelos atribuem a máquinas já consolidadas na indústria, destinadas principalmente nas operações de manipulação (pick and place). Nesse sentido, é relevante o estudo sobre a funcionalidade em outros tipos de operação como a usinagem e, particularmente o fresamento. Para isto, devem-se ainda explorar e desenvolver as capacidades dos mecanismos paralelos em relação à rigidez e à precisão nas operações mencionadas. Foi desenvolvido previamente o projeto e montagem do protótipo de uma máquina fresadora de arquitetura paralela. Também aracterizado pela redundância na atuação para o posicionamento da ferramenta. Com este intuito, pretende-se no trabalho atual, avaliar o erro estático de posicionamento da ferramenta por métodos experimentais, quantificar os deslocamentos, realizar um mapeamento experimental em diversas configurações dos membros. Por outro lado, pretende-se adaptar um modelo numérico simplificado que possa prever as deformações elásticas em diversas configurações, que contemple o efeito de juntas lineares flexíveis e que de alguma forma ajude a identificar as principais fontes de erro. Para tal, foram elaboradas rotinas de programação que através da cinemática inversa e o uso do método dos elementos finitos tentem prever o que de fato acontece nos experimentos. Foi proposta também uma implementação alternativa para o controle do mecanismo através de um software CNC e a conversão de coordenadas cartesianas em coordenadas dos atuadores, isto ajudaria na geração do código G. Finalmente, foram elaboradas algumas trajetórias que tentam avaliar a exatidão e repetitividade do mecanismo além de descrever outras trajetórias livres.

Fault diagnosis of an automotive suspension system

With the development of the embedded application and driving assistance systems, it becomes relevant to develop parallel mechanisms in order to check and to diagnose these new systems. In this thesis we focus our research on one of this type of parallel mechanisms and analytical redundancy for fault diagnosis of an automotive suspension system. We have considered a quarter model car passive suspension model and used a parameter estimation, ARX model, method to detect the fault happening in the damper and spring of system. Moreover, afterward we have deployed a neural network classifier to isolate the faults and identifies where the fault is happening. Then in this regard, the safety measurements and redundancies can take into the effect to prevent failure in the system. It is shown that The ARX estimator could quickly detect the fault online using the vertical acceleration and displacement sensor data which are common sensors in nowadays vehicles. Hence, the clear divergence is the ARX response make it easy to deploy a threshold to give alarm to the intelligent system of vehicle and the neural classifier can quickly show the place of fault occurrence.

Design and Characterization of Curved and Spherical Flexure Hinges for Planar and Spatial Compliant Mechanisms

A flexure hinge is a flexible connector that can provide a limited rotational motion between two rigid parts by means of material deformation. These connectors can be used to substitute traditional kinematic pairs (like bearing couplings) in rigid-body mechanisms. When compared to their rigid-body counterpart, flexure hinges are characterized by reduced weight, absence of backlash and friction, part-count reduction, but restricted range of motion. There are several types of flexure hinges in the literature that have been studied and characterized for different applications. In our study, we have introduced new types of flexures with curved structures i.e. circularly curved-beam flexures and spherical flexures. These flexures have been utilized for both planar applications (e.g. articulated robotic fingers) and spatial applications (e.g. spherical compliant mechanisms). We have derived closed-form compliance equations for both circularly curved-beam flexures and spherical flexures. Each element of the spatial compliance matrix is analytically computed as a function of hinge dimensions and employed material. The theoretical model is then validated by comparing analytical data with the results obtained through Finite Element Analysis. A case study is also presented for each class of flexures, concerning the potential applications in the optimal design of planar and spatial compliant mechanisms. Each case study is followed by comparing the performance of these novel flexures with the performance of commonly used geometries in terms of principle compliance factors, parasitic motions and maximum stress demands. Furthermore, we have extended our study to the design and analysis of serial and parallel compliant mechanisms, where the proposed flexures have been employed to achieve spatial motions e.g. compliant spherical joints.

A Global Constraint On Relative Rotation To Avoid Lumped Compliant Mechanisms In Topology Optimization

Some of the well known formulations for topology optimization of compliant mechanisms could lead to lumped compliant mechanisms. In lumped compliance, most of the elastic deformation in a mechanism occurs at few points, while rest of the mechanism remains more or less rigid. Such points are referred to as point-flexures. It has been noted in literature that high relative rotation is associated with point-flexures. In literature we also find a formulation of local constraint on relative rotations to avoid lumped compliance. However it is well known that a global constraint is easier to handle than a local constraint, by a numerical optimization algorithm. The current work presents a way of putting global constraint on relative rotations. This constraint is also simpler to implement since it uses linearized rotation at the center of finite-elements, to compute relative rotations. I show the results obtained by using this constraint oil the following benchmark problems - displacement inverter and gripper.

Singularity and controllability analysis of parallel manipulators and closed-loop mechanisms

This paper presents a study of kinematic and force singularities in parallel manipulators and closed-loop mechanisms and their relationship to accessibility and controllability of such manipulators and closed-loop mechanisms, Parallel manipulators and closed-loop mechanisms are classified according to their degrees of freedom, number of output Cartesian variables used to describe their motion and the number of actuated joint inputs. The singularities in the workspace are obtained by considering the force transformation matrix which maps the forces and torques in joint space to output forces and torques ill Cartesian space. The regions in the workspace which violate the small time local controllability (STLC) and small time local accessibility (STLA) condition are obtained by deriving the equations of motion in terms of Cartesian variables and by using techniques from Lie algebra.We show that for fully actuated manipulators when the number ofactuated joint inputs is equal to the number of output Cartesian variables, and the force transformation matrix loses rank, the parallel manipulator does not meet the STLC requirement. For the case where the number of joint inputs is less than the number of output Cartesian variables, if the constraint forces and torques (represented by the Lagrange multipliers) become infinite, the force transformation matrix loses rank. Finally, we show that the singular and non-STLC regions in the workspace of a parallel manipulator and closed-loop mechanism can be reduced by adding redundant joint actuators and links. The results are illustrated with the help of numerical examples where we plot the singular and non-STLC/non-STLA regions of parallel manipulators and closed-loop mechanisms belonging to the above mentioned classes. (C) 2000 Elsevier Science Ltd. All rights reserved.

Design of Single-Input-Single-Output Compliant Mechanisms for Practical Applications Using Selection Maps

We present an interactive map-based technique for designing single-input-single-output compliant mechanisms that meet the requirements of practical applications. Our map juxtaposes user-specifications with the attributes of real compliant mechanisms stored in a database so that not only the practical feasibility of the specifications can be discerned quickly but also modifications can be done interactively to the existing compliant mechanisms. The practical utility of the method presented here exceeds that of shape and size optimizations because it accounts for manufacturing considerations, stress limits, and material selection. The premise for the method is the spring-leverage (SL) model, which characterizes the kinematic and elastostatic behavior of compliant mechanisms with only three SL constants. The user-specifications are met interactively using the beam-based 2D models of compliant mechanisms by changing their attributes such as: (i) overall size in two planar orthogonal directions, separately and together, (ii) uniform resizing of the in-plane widths of all the beam elements, (iii) uniform resizing of the out-of-plane thick-nesses of the beam elements, and (iv) the material. We present a design software program with a graphical user interface for interactive design. A case-study that describes the design procedure in detail is also presented while additional case-studies are posted on a website. DOI:10.1115/1.4001877].