In vitro precision of fit of computer-aided design and computer-aided manufacturing titanium and zirconium dioxide bars

OBJECTIVES Optical scanners combined with computer-aided design and computer-aided manufacturing (CAD/CAM) technology provide high accuracy in the fabrication of titanium (TIT) and zirconium dioxide (ZrO) bars. The aim of this study was to compare the precision of fit of CAD/CAM TIT bars produced with a photogrammetric and a laser scanner. METHODS Twenty rigid CAD/CAM bars were fabricated on one single edentulous master cast with 6 implants in the positions of the second premolars, canines and central incisors. A photogrammetric scanner (P) provided digitized data for TIT-P (n=5) while a laser scanner (L) was used for TIT-L (n=5). The control groups consisted of soldered gold bars (gold, n=5) and ZrO-P with similar bar design. Median vertical distance between implant and bar platforms from non-tightened implants (one-screw test) was calculated from mesial, buccal and distal scanning electron microscope measurements. RESULTS Vertical microgaps were not significantly different between TIT-P (median 16μm; 95% CI 10-27μm) and TIT-L (25μm; 13-32μm). Gold (49μm; 12-69μm) had higher values than TIT-P (p=0.001) and TIT-L (p=0.008), while ZrO-P (35μm; 17-55μm) exhibited higher values than TIT-P (p=0.023). Misfit values increased in all groups from implant position 23 (3 units) to 15 (10 units), while in gold and TIT-P values decreased from implant 11 toward the most distal implant 15. SIGNIFICANCE CAD/CAM titanium bars showed high precision of fit using photogrammetric and laser scanners. In comparison, the misfit of ZrO bars (CAM/CAM, photogrammetric scanner) and soldered gold bars was statistically higher but values were clinically acceptable.

Approach to integrate product conceptual design information into a computer-aided design system

Commercial computer-aided design systems support the geometric definition of product, but they lack utilities to support initial design stages. Typical tasks such as customer need capture, functional requirement formalization, or design parameter definition are conducted in applications that, for instance, support ?quality function deployment? and ?failure modes and effects analysis? techniques. Such applications are noninteroperable with the computer-aided design systems, leading to discontinuous design information flows. This study addresses this issue and proposes a method to enhance the integration of design information generated in the early design stages into a commercial computer-aided design system. To demonstrate the feasibility of the approach adopted, a prototype application was developed and two case studies were executed.

Comparative study of auxetic geometrics by means of computer-aided design and engineering

Auxetic materials (or metamaterials) are those with a negative Poisson ratio (NPR) and display the unexpected property of lateral expansion when stretched, as well as an equal and opposing densification when compressed. Such geometries are being progressively employed in the development of novel products, especially in the fields of intelligent expandable actuators, shape morphing structures and minimally invasive implantable devices. Although several auxetic and potentially auxetic geometries have been summarized in previous reviews and research, precise information regarding relevant properties for design tasks is not always provided. In this study we present a comparative study of two-dimensional and three-dimensional auxetic geometries carried out by means of computer-aided design and engineering tools (from now on CAD–CAE). The first part of the study is focused on the development of a CAD library of auxetics. Once the library is developed we simulate the behavior of the different auxetic geometries and elaborate a systematic comparison, considering relevant properties of these geometries, such as Poisson ratio(s), maximum volume or area reductions attainable and equivalent Young's modulus, hoping it may provide useful information for future designs of devices based on these interesting structures.

Computer programs for safety analysis.

Federal Highway Administration, Office of Implementation, Washington, D.C.

Computer programs for safety analysis: HISAM users manual and operators guide.

Federal Highway Administration, Washington, D.C.

Computer programs for safety analysis: HISAFE users manual and operators guide.

Federal Highway Administration, Office of Research and Development, McLean, Va.

Products from two computer programs which process digital bathymetric data /

"October 1981."

Report from Task Force on Hydrologic Computer Programs.

Mode of access: Internet.

Documentation of computer programs and automated data systems : proceedings of a symposium held at the National Bureau of Standards, Gaithersburg, MD, October 12, 1976 /

Mode of access: Internet.

Osiris III; an integrated collection of computer programs for the management and analysis of social science data.

v. 1. System and program description.--v. 2. Error Messages.--v. 3. Summary of control cards.--v. 4. Sample jobs.--v. 5. Formulas and statistical references.--v. 6. Primer.

Computer programs for assessing required mission sizes and damage to ground targets in tactical air current operations planning.

"Prepared under Contract AF 19(628)-4805 by the Cornell Aeronautical Laboratory, Inc., of Cornell University."

Computer programs used to analyze wind and bridge data acquired at Sitka, Alaska /

Mode of access: Internet.

Summary of selected computer programs produced by the U.S. Geological Survey for simulation of ground-water flow and quality, 1994 /

Mode of access: Internet.

Engineering design handbook : computer aided design of mechanical systems.

Cover title.