Effect of Different Light-Curing Modes on Degree of Conversion, Staining Susceptibility and Stain's Retention Using Different Beverages in a Nanofilled Composite Resin

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The influence of the thickness on the functional properties of cassava starch edible films

The properties of edible films are influenced by several factors, including thickness. The purpose of this paper was to study the influence of thickness on the viscoelasticity properties, water vapor permeability, color and opacity of cassava starch edible films. These films were prepared by a casting technique, the film-forming solutions were 1, 2, 3 and 4% (w/v) of starch, heated to 70degreesC. Different thicknesses were obtained by putting 15 to 70 g of each solution on plexiglass plates. After drying at 30degreesC and ambient relative humidity, these samples were placed for 6 days at RH of 75%, at 22degreesC. The sample thicknesses were determined by a digital micrometer (+/-0.001 mm), as the average of nine different points. The viscoelasticity properties were determined by stress relaxation tests with a texture analyser TA.XT2i (SMS), being applied the Burgers model of four parameters. The water vapor permeability was determined with a gravimetric method, and color and opacity were determined using a Miniscan XE colorimeter, operated according to the Hunterlab method. All the tests were carried out in duplicate at 22degreesC. Practically, the four visco-elasticity properties calculated by the Burgers model had the same behavior, increasing with the thickness of all films, according to a power law model. The water vapor permeability and the color difference increased linearly with the thickness (0.013-0.144 mm) of all films prepared with solution of 1 to 4% of starch. on the other hand, the effect of the variation of the thickness over the opacity, was more important in the films with 1 and 2% of starch. It can be concluded that the control of the thickness in the elaboration of starch films by the casting technique is of extreme importance.

Influência do treinamento físico de alta intensidade sobre o metabolismo de ratos espontaneamente hipertensos (SHR)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da segurança e estudo da permeação e retenção cutânea de géis de ácido hialurônico

Pós-graduação em Ciências Farmacêuticas - FCFAR

Estudo de diferentes propriedades de resinas compostas comerciais e experimental

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Black bone syndrome in chiken meat

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Síntese e caracterização estrutural de pigmentos cerâmicos a base de cromita por método químico

The ceramic pigments are colored inorganic substances that during the process of dispersion in the ceramic glazes and subsequent calcination, are stable against physical and chemical attack. Therefore, they are crystalline compounds applied in the ceramic industry for coloring vitreous base. In this study, the Pechini method was used for obtaining the pigment CuCr2O4 with heat treatment at the temperatures of 800, 900 and 1000 ° C. The powder pigments were characterized on their structural, morphological and colorimetric aspects. The thermal analysis conducted on an amorphous precursor in a TG / DTA indicates the weight loss in the entire temperature range investigated, with characteristic exothermic peak of the elimination of the organic composition of the precursor around 300°C. The development of the crystalline phases were investigated by XRD, using a diffractometer with Cu Ka radiation and graphite monochromator, where it was observed the presence of crystalline phases corresponding to Cr2O3 and CuCr2O4.The measurements of the specific surface area of the powders pigments were carried out in an equipment Micromeritcs, model ASAP 2000, using N2 as gas of adsorption/desorption. The colorimetric measurements of the pigments were made in a colorimeter Gretac Macbeth Color-eye spectrophotometer 2180 / 2180UV in CIELAB standards. Based on the obtained results, it can be verified the thermal stability of the powder pigments of green coloration, which enables it as an alternative to the materials currently used in the manufacture of ceramic tiles.

Bacterial oxycarotenoids added into broiler chickens ration modify breast meat color

Some markets around the world demand for well pigmented poultry products, what justifies the intentional use of synthetic additives in rations during breeding. The inconvenient for that practice most times is the elevated price of these products, beyond the argument of being chemicals, which may not be viable for some production systems. So, the aim of this experiment was to check on the ability of natural red oxycarotenoids produced by R. gelatinosus to modify broilers breast meat color. Bacterial biomass containing oxycarotenoids were added into Cobb broilers finisher diets at 0, 1.0, 2.0 and 3.0 g/kg and fed during 10 days (35-45 d). Five replicates (10 birds each) were performed. At days 35, 37, 39, 41, 43 and 45, 100 birds were slaughtered scalded, defeathered and eviscerated. Data on live and carcass weights were recorded. After cooling, color parameters of meat were determined on breast surface using a HunterLab XE Plus colorimeter calibrated with black and white standard tiles. Regression analysis was used for the investigation of relationships between days of consumption and biomass concentration on color values, live weight and carcass yield. Results showed that redness of breast meat was significantly influenced by the biomass concentration in a linear effect (P=0.0056) and also by the time of consumption, in a quadratic effect (P=0.0232). Days of consumption also affected yellowness and lightness with significant quadratic responses (P=0.0225 and P<0.0001, respectively). Birds live weight increased significantly during the application of the experimental diets (P<0.0001), showing no negative influence of the biomass administration. Also no deleterious effects derived from the application of the product were observed on carcass yield. So we concluded that R. gelatinosus oxycarotenoids present in the bacterial biomass can modify broilers breast meat color, performing as an alternative pigmenting additive in poultry production.

Ação do ácido abscísico na cor das bagas, na qualidade e no armazenamento pós-colheita da uva Rubi

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Peri-implant soft tissue colour around titanium and zirconia abutments: a prospective randomized controlled clinical study

OBJECTIVES To objectively determine the difference in colour between the peri-implant soft tissue at titanium and zirconia abutments. MATERIALS AND METHODS Eleven patients, each with two contralaterally inserted osteointegrated dental implants, were included in this study. The implants were restored either with titanium abutments and porcelain-fused-to-metal crowns, or with zirconia abutments and ceramic crowns. Prior and after crown cementation, multi-spectral images of the peri-implant soft tissues and the gingiva of the neighbouring teeth were taken with a colorimeter. The colour parameters L*, a*, b*, c* and the colour differences ΔE were calculated. Descriptive statistics, including non-parametric tests and correlation coefficients, were used for statistical analyses of the data. RESULTS Compared to the gingiva of the neighbouring teeth, the peri-implant soft tissue around titanium and zirconia (test group), showed distinguishable ΔE both before and after crown cementation. Colour differences around titanium were statistically significant different (P = 0.01) only at 1 mm prior to crown cementation compared to zirconia. Compared to the gingiva of the neighbouring teeth, statistically significant (P < 0.01) differences were found for all colour parameter, either before or after crown cementation for both abutments; more significant differences were registered for titanium abutments. Tissue thickness correlated positively with c*-values for titanium at 1 mm and 2 mm from the gingival margin. CONCLUSIONS Within their limits, the present data indicate that: (i) The peri-implant soft tissue around titanium and zirconia showed colour differences when compared to the soft tissue around natural teeth, and (ii) the peri-implant soft tissue around zirconia demonstrated a better colour match to the soft tissue at natural teeth than titanium.

Determinación del color de aceites de oliva vírgenes (Mendoza-Argentina)

El color es un criterio básico en la evaluación de la calidad del aceite de oliva virgen y constituye una cualidad fundamental en el análisis sensorial. Este nuevo parámetro de calidad del aceite de oliva virgen puede verse afectado por la variedad y el grado de madurez de la aceituna, la zona de producción, el proceso de obtención y la conservación. Debido a la importancia que actualmente tiene la tipificación de los alimentos (por ejemplo en las denominaciones de origen), surge la necesidad de conocer el color del aceite de oliva virgen. Para su determinación se utilizaron dos métodos analíticos: la escala ABT modificada (Azul de Bromotimol) y el colorímetro HunterLab. Los resultados muestran que el cociente a/b constituye un parámetro adecuado para comparar y clasificar aceites de oliva vírgenes y brinda una mayor información en la comercialización de este producto.

Un método fotocolorimétrico para la determinación de alcohol en vinos

Se describe un método fotocolorimétrico para la determinación de alcohol en vinos basado en la medida del cambio de color que sufre el bicromato de potasio durante la oxidación de esa sustancia orgánica. El frasco de reacción descripto permite efectuar la destilación del alcohol en la medida directa del color sin necesidad de verter el líquido reactivo a otro recipiente. El anhídrido sulfuroso no tiene influencia apreciable en los resultados obtenidos, y no se hace necesaria la neutralización previa de la muestra. Como es de esperar, tampoco el ácido acético influye en las determinaciones. El método ofrece una precisión considerable y esta circunstancia, unida a la sencillez de las manipulaciones, lo hacen aconsejable en diversos casos.

A quality assessment system for fresh fruits in hypermarkets and fruit trading centres.

When the fresh fruit reaches the final markets from the suppliers, its quality is not always as good as it should, either because it has been mishandled during transportation or because it lacks an adequate quality control at the producer level, before being shipped. This is why it is necessary for the final markets to establish their own quality assessment system if they want to ensure to their customers the quality they want to sell. In this work, a system to control fruit quality at the last level of the distribution channel has been designed. The system combines rapid control techniques with laboratory equipment and statistical sampling protocols, to obtain a dynamic, objective process, which can substitute advantageously the quality control inspections carried out visually by human experts at the reception platform of most hypermarkets. Portable measuring equipment have been chosen (firmness tester, temperature and humidity sensors...) as well as easy-to-use laboratory equipment (texturometer, colorimeter, refractometer..,) combining them to control the most important fruit quality parameters (firmness, colour, sugars, acids). A complete computer network has been designed to control all the processes and store the collected data in real time, and to perform the computations. The sampling methods have been also defined to guarantee the confidence of the results. Some of the advantages of a quality assessment system as the proposed one are: the minimisation of human subjectivity, the ability to use modern measuring techniques, and the possibility of using it also as a supplier's quality control system. It can be also a way to clarify the quality limits of fruits among members of the commercial channel, as well as the first step in the standardisation of quality control procedures.