Analysis of the genome of Spodoptera frugiperda nucleopolyhedrovirus (SfMNPV-19) and of the high genomic heterogeneity in group II nucleopolyhedroviruses

The genome of the most virulent among 22 Brazilian geographical isolates of Spodoptera frugiperda nucleopolyhedrovirus, isolate 19 (SfMNPV-1 9), was completely sequenced and shown to comprise 132 565 bp and 141 open reading frames (ORFs). A total of 11 ORFs with no homology to genes in the GenBank database were found. Of those, four had typical baculovirus; promoter motifs and polyadenylation sites. Computer-simulated restriction enzyme cleavage patterns of SfMNPV-1 9 were compared with published physical maps of other SfMNPV isolates. Differences were observed in terms of the restriction profiles and genome size. Comparison of SfMNPV-1 9 with the sequence of the SfMNPV isolate 3AP2 indicated that they differed due to a 1427 bp deletion, as well as by a series of smaller deletions and point mutations. The majority of genes of SfMNPV-1 9 were conserved in the closely related Spodoptera exigua NPV (SeMNPV) and Agrotis segetum NPV (AgseMNPV-A), but a few regions experienced major changes and rearrangements. Synthenic maps for the genomes of group 11 NPVs revealed that gene collinearity was observed only within certain clusters. Analysis of the dynamics of gene gain and loss along the phylogenetic tree of the NPVs showed that group 11 had only five defining genes and supported the hypothesis that these viruses form ten highly divergent ancient lineages. Crucially, more than 60% of the gene gain events followed a power-law relation to genetic distance among baculoviruses, indicative of temporal organization in the gene accretion process.

Análise da precificação de imóveis na cidade do Rio de Janeiro utilizando Modelagem Hedônica e os efeitos da autocorrelação espacial

A escolha da cidade do Rio de Janeiro como sede de grandes eventos esportivos mundiais, a Copa do Mundo de Futebol de 2014 e os Jogos Olímpicos de 2016, colocou-a no centro de investimentos em infraestrutura, mobilidade urbana e segurança pública, com consequente impacto no mercado imobiliário, tanto de novos lançamentos de empreendimentos, quanto na revenda de imóveis usados. Acredita-se que o preço de um imóvel dependa de uma relação entre suas características estruturais como quantidade de quartos, suítes, vagas de garagem, presença de varanda, tal como sua localização, proximidade com centros de trabalho, entretenimento e áreas valorizadas ou degradadas. Uma das técnicas para avaliar a contribuição dessas características para a formação do preço do imóvel, conhecido na Econométrica como Modelagem Hedônica de Preços, é uma aplicação de regressão linear multivariada onde a variável dependente é o preço e as variáveis independentes, as respectivas características que deseja-se modelar. A utilização da regressão linear implica em observar premissas que devem ser atendidas para a confiabilidade dos resultados a serem analisados, tais como independência e homoscedasticidade dos resíduos e não colinearidade entre as variáveis independentes. O presente trabalho objetiva aplicar a modelagem hedônica de preços para imóveis localizados na cidade do Rio de Janeiro em um modelo de regressão linear multivariada, em conjunto com outras fontes de dados para a construção de variáveis de acessibilidade e socioambiental a fim de verificar a relação de importância entre elas para a formação do preço e, em particular, exploramos brevemente a tendência de preços em função da distância a favelas. Em atenção aos pré-requisitos observados para a aplicação de regressão linear, verificamos que a premissa de independência dos preços não pode ser atestada devido a constatação da autocorrelação espacial entre os imóveis, onde não apenas as características estruturais e de acessibilidade são levadas em consideração para a precificação do bem, mas principalmente a influência mútua que os imóveis vizinhos exercem um ao outro.

Gestão de satisfação e fidelidade do cliente: um estudo com turistas em hotéis

This Thesis deals with a study on customer satisfaction and loyalty focusing on a model of factors antecedents of customer satisfaction and loyalty. The model is based on a Satisfaction Index model adopted in Norway developed by Johnson et al.(2001) and the service quality drivers from the literature. It is surveyed a sample of tourist in Natal. It is used a survey questionnaire applied at the airport in the departure moment of the tourist. The final sample results on 198 cases. Is is used a multiple regression analysis as the method to verify the factor affecting satisfaction and loyalty. Two models arise from the analysis. The first model concerning satisfaction results with cleaness and hygiene of the bathroom, leisure facilities, employees promptness, and price as the significant factors affecting satisfaction. The model has a R2 of 0.6430 and the also check in service, cleaness of the apartment and the hotel in general, bedroom setting have colinearity with some factors entering the model. The loyalty model results with satisfaction, affective commitment as the main factors affecting loyalty, with a R2 0.5396, and also image has collinearity with satisfaction. A small part of the sample has complained and this factor was not considered in the models. The results are consistent with the literature in term of quality as the main driver of the satisfaction and that it is not the only one factor to explain loyalty

DETERMINATION of THE INDIRECT ORIENTATION of ORBITAL PUSHBROOM IMAGES USING CONTROL STRAIGHT LINES

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

A low-cost 3D reconstruction system using a single-shot projection of a pattern matrix

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bundle Block Adjustment of CBERS-2B HRC Imagery Combining Control Points and Lines

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Orientação de imagens CBERS-2B usando o modelo rigoroso de colinearidade com dados orbitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Extração automatica de feições rodoviáris em imagens digitais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Orientação indireta de imagens com uso de apoio fotogramétrico extraído a partir da integração de dados derivados do sistema lidar e fotogrametria

In this work a method is proposed to allow the indirect orientation of images using photogrammetric control extracted through integration of data derived from Photogrammetry and Light Detection and Ranging (LiDAR) system. The photogrammetric control is obtained by using an inverse photogrammetric model, which allows the projection of image space straight lines onto the object space. This mathematical model is developed based on the intersection between the collinearity-based straight line and a DSM of region, derived from LiDAR data. The mathematical model used in the indirect orientation of the image is known as the model of equivalent t planes. This mathematical model is based on the equivalence between the vector normal to the projection plane in the image space and to the vector normal to the rotated projection plane in the object space. The goal of this work is to verify the quality, efficiency and potential of photogrammetric control straight lines obtained with proposed method applied to the indirect orientation of images. The quality of generated photogrammetric control was statistically available and the results showed that proposed method is promising and it has potential for the indirect orientation of images.

Occurrence and risk factors associated with canine leptospirosis

Leptospirosis is a globally distributed emerging zoonosis. Dogs are commonly affected and although other serovars can cause canine leptospirosis, Leptospira interrogans serovar Canicola is primary found in these animals. A retrospective study was conducted using a database of 1195 dogs tested for Leptospira infection from 2003 to 2010 at the Laboratory of Zoonosis Diagnosis at the Veterinary Hospital of São Paulo State University (UNESP) in Botucatu, São Paulo state, Brazil. The seroprevalence of infected dogs was 20.08% (240/1195), and the most prevalent serovars were Canicola (6.7%), Copenhageni (5.0%), Icterohaemorrhagiae (2.9%), Autumnalis (2.9%), Pyrogenes (2.8%), Pomona (2.0%), Hardjo (2.0%), Australis (1.8%), Bratislava (1.6%), Cynopteri (1.4%), Grippotyphosa (1.3%) and Djasiman (1.0%). By univariate analysis, the variables age and breed were not statistically related to the infection, while gender and season were. The effects of gender were also noticeable related to serovars Australis, Canicola and Hardjo. In multivariate analysis, the level of significance (p-value) of season was suppressed by gender, indicating possible collinearity between those two variables.

Extração semiautomática de rodovias no espaço-objeto: uso integrado de um estereopar de imagens aéreas e um MDT

Neste artigo é proposto um método semiautomático para extração de rodovias combinando um estereopar de imagens aéreas de baixa resolução com um poliedro gerado a partir de um modelo digital do terreno (MDT). O problema é formulado no espaço-objeto através de uma função objetivo que modela o objeto 'rodovia' como uma curva suave e pertencente a uma superfície poliédrica. A função objetivo proposta depende também de informações radiométricas, que são acessadas no espaço-imagem via relação de colinearidade entre pontos da rodovia no espaço-objeto e os correspondentes nos espaços imagem do estereopar. A linha poligonal que melhor modela a rodovia selecionada é obtida por otimização no espaço-objeto da função objetivo, tendo por base o algoritmo de programação dinâmica. O processo de otimização é iterativo e dependente do fornecimento por um operador de uma aproximação inicial para a rodovia selecionada. Os resultados obtidos mostraram que o método é robusto frente a anomalias existentes ao longo das rodovias, tais como obstruções causadas por sombras e árvores.

Accuracy assessment of a photogrammetric close-range reconstruction system

Geometric accuracy of a close-range photogrammetric system is assessed in this paper considering surface reconstruction with structured light as its main purpose. The system is based on an off-the-shelf digital camera and a pattern projector. The mathematical model for reconstruction is based on the parametric equation of the projected straight line combined with collinearity equations. A sequential approach for system calibration was developed and is presented. Results obtained from real data are also presented and discussed. Experiments with real data using a prototype have indicated 0.5mm of accuracy in height determination and 0.2mm in the XY plane considering an application where the object was 1630mm distant from the camera.

Automated extraction of road network from medium-and high-resolution images

This paper presents an automatic methodology for road network extraction from medium-and high-resolution aerial images. It is based on two steps. In the first step, the road seeds (i.e., road segments) are extracted using a set of four road objects and another set of connection rules among road objects. Each road object is a local representation of an approximately straight road fragment and its construction is based on a combination of polygons describing all relevant image edges, according to some rules embodying road knowledge. Each road seed is composed by a sequence of connected road objects in which each sequence of this type can be geometrically structured as a chain of contiguous quadrilaterals. In the second step, two strategies for road completion are applied in order to generate the complete road network. The first strategy is based on two basic perceptual grouping rules, i.e., proximity and collinearity rules, which allow the sequential reconstruction of gaps between every pair of disconnected road segments. This strategy does not allow the reconstruction of road crossings, but it allows the extraction of road centerlines from the contiguous quadrilaterals representing connected road segments. The second strategy for road completion aims at reconstructing road crossings. Firstly, the road centerlines are used to find reference points for road crossings, which are their approximate positions. Then these points are used to extract polygons representing the contours of road crossings. This paper presents the proposed methodology and experimental results. © Pleiades Publishing, Inc. 2006.

Um modelo para orientação de imagens orbitais baseado em feições retas

The aim of this paper is to present a model for orientation of pushbroom sensors that allows estimating the polynomial coefficients describing the trajectory of the platform, using linear features as ground control. Considering that pushbroom image acquisition is not instantaneous, six EOP (Exterior Orientation Parameters) for each scanned line must be estimated. The sensor position and attitude parameters are modeled with a time dependent polynomial. The relationship between object and image space is established through a mathematical model based on the equivalence between the vector normal to the projection plane in the image space and to the vector normal to the rotated projection plane in the object space. The equivalence property between planes was adapted to consider the pushbroom geometry. Some experiments with simulated data corresponding to CBERS scene (China-Brazil Earth Resource Satellite) were accomplished in order to test the developed model using straight lines. Moreover, experiments with points ground with the model based on collinearity equations adapted to the pushbroom geometry were also accomplished. The obtained results showed that the proposed model can be used to estimate the EOP of pushbroom images with suitable accuracy.

Path analysis and expected response in indirect selection for grain yield in soybean

This study aimed to determine the best auxiliary trait for indirect selection of soybean grain yield, through path analysis and in avoidance of the adverse effects of multicollinearity and expected response. Seventy-nine F5 soybean genotypes from the cross FT-Cometa x Bossier were used. The populations were distributed on the field was the families inserted with replicated controls. Primary and secondary traits of grain yield were evaluated in four phenotypically superior plants per family. The traits number of pods, height and number of nodes were considered as the most important, showing the best combination of direct effect and genotypic correlation. The number of pods achieved the highest expected gain through the estimation method based on the selection differential. On the other hand, plant height, by the method based on selection intensity, was not a good indicator of the most productive plants.