Investigação diagnóstica de erros inatos do metabolismo em um hospital universitário

OBJETIVOS: Estabelecer a freqüência de erros inatos do metabolismo (EIMs) em uma amostra de pacientes com hipótese diagnóstica de EIM proveniente do Hospital das Clínicas da Faculdade de Medicina de Botucatu da Universidade Estadual Paulista (UNESP) e analisar a metodologia empregada nessa investigação. AMOSTRA E MÉTODOS: Foram triadas para EIM, por testes químicos e técnicas cromatográficas, 1.233 amostras de urina de 905 pacientes. RESULTADOS: O diagnóstico de EIM foi estabelecido em 18 (1,98%) pacientes; 12 deles apresentaram triagem (testes químicos e cromatografias) alterada para EIM. Todos os pacientes foram diagnosticados por análises enzimáticas. CONCLUSÃO: A freqüência de EIMs diagnosticados neste estudo (1,98%), quando comparada com a literatura, foi satisfatória, uma vez que este grupo de pacientes foi proveniente de um único hospital. A metodologia provou ser eficaz, indicando 12 casos de EIM entre os 18 diagnosticados. O estudo mostra a importância de laboratórios especializados na detecção deste tipo de patologia.

OLEO ESSENCIAL EM ALGUMAS ESPECIES DE EUCALYPTUS

In this work we used leaves of four species of Eucalyptus - E. bicostata Maiden, E. deanei Maiden, E. dunnii Maiden and E. viminalis Labill, grown in Colombo, Parana State, Brazil. Preliminary studies were done, in the following sequence: botanic identification, olfactory research, extraction and purification of the essential oil of each species. The physical and chemical tests done were the following: relative density, refractive index, optical rotation, solubility, coagulation point and cineol percentage. The essential oils analysed through gaseous chromatography, presented the following cineol percentage: E. bicostata Maiden - 26.92%, E. deanei Maiden - 70.21%, E. dunnii Maiden - 53.16% and E. viminalis Labill - 23.05%.

Composição fitoquímica dos óleos essenciais de folhas de Lippia alba (Mill.)N.E.Br. em diferentes épocas de colheita e partes do ramo

This work aimed to determine the best harvest time for biomass production, yield and essential oil composition considering the seasonal variation (spring, summer, autumn and winter) on different plant parts (apical, medial and basal). Essential oils were extracted by hydro-distillation with a Clevenger apparatus for both fresh and dry mass obtained in field and lab conditions respectively. The extracted essential oils were analyzed by GS/MS (Shimadzu, QP-5000). The chemical components were identified by comparing their mass spectrum to the patterns filed in the MS computer memory (Wiley,139,Lib.), to the literature references, and by co-injection with authentic standards. Applying phyto-chemical tests on fresh and dry mass, the chemical component percentages of essential oils were calculated and identified as follows: citral (neral and geranial), myrcene, caryophylene and elemene.

Floral anatomy of Paepalanthoideae (Eriocaulaceae, Poales) and their nectariferous structures

• Background and Aims: Eriocaulaceae (Poales) is currently divided in two subfamilies: Eriocauloideae, which comprises two genera and Paepalanthoideae, with nine genera. The floral anatomy of Actinocephalus polyanthus, Leiothrix fluitans, Paepalanthus chlorocephalus, P. flaccidus and Rondonanthus roraimae was studied here. The flowers of these species of Paepalanthoideae are unisexual, and form capitulum-type inflorescences. Staminate and pistillate flowers are randomly distributed in the capitulum and develop centripetally. This work aims to establish a floral nomenclature for the Eriocaulaceae to provide more information about the taxonomy and phylogeny of the family. • Methods: Light microscopy, scanning electron microscopy and chemical tests were used to investigate the floral structures. • Key Results: Staminate and pistillate flowers are trimerous (except in P. flaccidus, which presents dimerous flowers), and the perianth of all species is differentiated into sepals and petals. Staminate flowers present an androecium with scale-like staminodes (not in R. roraimae) and fertile stamens, and nectariferous pistillodes. Pistillate flowers present scale-like staminodes (except for R. roraimae, which presents elongated and vascularized staminodes), and a gynoecium with a hollow style, ramified in stigmatic and nectariferous portions. • Conclusions: The scale-like staminodes present in the species of Paepalanthoideae indicate a probable reduction of the outer whorl of stamens present in species of Eriocauloideae. Among the Paepalanthoideae genera, Rondonanthus, which is probably basal, shows vascularized staminodes in their pistillate flowers. The occurrence of nectariferous pistillodes in staminate flowers and that of nectariferous portions of the style in pistillate flowers of Paepalanthoideae are emphasized as nectariferous structures in Eriocaulaceae. © The Author 2006. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved.

Using the electrochemical impedance spectroscopy to characterize carbon steel in biodiesel medium

Electrochemical impedance spectroscopy measurements using two carbon steel electrodes in soybean biodiesel medium, produced by methylic route, were performed in an electrochemical cell that allows positioning the two electrodes face-to-face. To retain the biodiesel between the electrodes and prevent its leakage a porous membrane soaked in biodiesel was used. The amplitude of the AC potential and the area of the electrodes were varied. The linearity between disturbance and response signals was observed for tests when the amplitude of the AC potential was lower than 1500 mV (rms). The electrical resistance of biodiesel dominates the global response and carbon steel presents low corrosion, which is observed only at low frequency, and was confirmed by chemical tests performed in the membrane. In conclusion the electrical resistance of biodiesel can be estimated using electrochemical impedance spectroscopy with two electrodes set up. ©The Electrochemical Society.

Qualidade fisico-química, microbiológica e resíduos de antimicrobianos em leite in natura comercializado informalmente em Brotas-SP

Pós-graduação em Medicina Veterinária - FMVZ

Desenvolvimento de métodos quantitativos e de sistemas de screening para a determinação de glifosato

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The application of neural networks to the analysis of dissolved gases in insulating oil used in transformers

The state of insulating oils used in transformers is determined through the accomplishment of physical-chemical tests, which determine the state of the oil, as well as the chromatography test, which determines possible faults in the equipment. This article concentrate on determining, from a new methodology, a relationship among the variation of the indices obtained from the physical-chemical tests with those indices supplied by the chromatography tests.The determination of the relationship among the tests is accomplished through the application of neural networks. From the data obtained by physical-chemical tests, the network is capable to determine the relationship among the concentration of the main gases present in a certain sample, which were detected by the chromatography tests.More specifically, the proposed approach uses neural networks of perceptron type constituted of multiple layers. After the process of network training, it is possible to determine the existent relationship between the physical-chemical tests and the amount of gases present in the insulating oil.

Thermal analysis of coordination compounds. Part 3. Thermal decomposition of platinum complexes containing triphenylphosphine, triphenylarsine and triphenylstibine

Studies by thermogravimetric analysis (TG) and differential thermal analysis (DTA) of the complexes [PtCl2L2] (L is PPh3, AsPh3, SbPh3), [PtLn] (n = 3, L is SbPh3; n = 4, L is PPh3, AsPh3); [(PtL3)2N2]; [(PtL3)2C2] and [Pt(CO)2L2] (L is SbPh3) are described. Analysis of the TG and DTA curves showed that Pt(II) complexes of the type [PtCl2L2] have a higher thermal stability than the corresponding Pt(0) complexes of the type [PtLn], with the exception of [Pt(SbPh3)3], which is more stable than [PtCl2(SbPh3)2]. Thermal stabilities of each of the complexes are compared with those of the others in the series. Mechanisms of thermal decomposition of complexes of the types [PtCl2L2] and [PtLn] are proposed. Residues of the samples were characterized by chemical tests and IR spectroscopy. The residue from the thermal decomposition of [PtCl2L2] (L is PPh3, AsPh3) and [Pt(PPh3)4] is metallic platinum. For [Pt(AsPh3)4] the residue is a mixture of Pt and As, whereas for the complexes containing SbPh3 the residues are mixtures of Pt and Sb. In these cases, the proportional contents of Pt and As or Pt and Sb correspond to the stoichiometry of these elements in the respective complexes. The complexes {[Pt(SbPh3)3]2N2}, {[Pt(SbPh3)3]2C2} lose N2 or the ethynediyl group at 130-150°C and are transformed into [Pt(SbPh3)3]. © 1995.

Isolation, selection and characterization of root-associated growth promoting bacteria in Brazil Pine (Araucaria angustifolia)

Araucaria angustifolia, a unique species of this genus that occurs naturally in Brazil, has a high socio-economic and environmental value and is critically endangered of extinction, since it has been submitted to intense predatory exploitation during the last century. Root-associated bacteria from A. angustifolia were isolated, selected and characterized for their biotechnological potential of growth promotion and biocontrol of plant pathogenic fungi. Ninety-seven strains were isolated and subjected to chemical tests. All isolates presented at least one positive feature, characterizing them as potential PGPR. Eighteen isolates produced indole-3-acetic acid (IAA), 27 were able to solubilize inorganic phosphate, 21 isolates were presumable diazotrophs, with pellicle formation in nitrogen-free culture medium, 83 were phosphatases producers, 37 were positive for siderophores and 45 endospore-forming isolates were antagonistic to Fusarium oxysporum, a pathogen of conifers. We also observed the presence of bacterial strains with multiple beneficial mechanisms of action. Analyzing the fatty acid methyl ester (FAME) and partial sequencing of the 16S rRNA gene of these isolates, it was possible to characterize the most effective isolates as belonging to Bacillaceae (9 isolates), Enterobacteriaceae (11) and Pseudomonadaceae (1). As far as we know, this is the first study to include the species Ewingella americana as a PGPR. (C) 2011 Elsevier GmbH. All rights reserved.

Caracterización de uvas para vinificar en diferentes regiones de Mendoza (Argentina)

En las últimas décadas, la actividad vitivinícola de la provincia de Mendoza (Argentina) apunta a mejorar la calidad de sus uvas y sus vinos, para optimizar las condiciones de competencia en el plano internacional. En Mendoza, desde 1999 la Fundación Instituto de Desarrollo Rural (IDR) se propuso determinar el comportamiento agronómico y la caracterización fenológica de las variedades de vid de mayor utilización en la elaboración de vinos en todas las zonas productivas de la provincia. A partir de 2005 y mediante un convenio específico con la Facultad de Ciencias Agrarias, se realizaron, en esta Institución, los análisis físicos y químicos con el objetivo de describir los mostos de variedades viníferas blancas y tintas. Este proceso permitió generar una herramienta para el desarrollo de estrategias de optimización de calidad de los productos. Se estudiaron las variedades Chardonnay, Cabernet Sauvignon, Merlot, Syrah, Malbec y Bonarda y se realizó una caracterización zonal empleando los Índices de Tonietto (IF), de Winkler (IW) y de Huglin (IH). Los resultados de los análisis físico-químicos de los mostos de variedades tintas durante las cosechas 2005, 2006 y 2007 muestran que existe correlación inversa entre los índices climáticos estudiados y los contenidos de antocianos y polifenoles. Se observa también que las variedades de ciclo largo, como Bonarda, encuentran limitantes importantes en zonas frías para alcanzar contenidos de azúcar comercialmente aceptables (mínimo 220 g/L).

Desarrollo de estructuras nanofotonicas de campo cercano para intensificacion localizada de luz en celulas solares de banda intermedia - Near-field nanophotonic structures for localized light enhancement in intermediate band solar cells

This doctoral thesis explores some of the possibilities that near-field optics can bring to photovoltaics, and in particular to quantum-dot intermediate band solar cells (QD-IBSCs). Our main focus is the analytical optimization of the electric field distribution produced in the vicinity of single scattering particles, in order to produce the highest possible absorption enhancement in the photovoltaic medium in their surroundings. Near-field scattering structures have also been fabricated in laboratory, allowing the application of the previously studied theoretical concepts to real devices. We start by looking into the electrostatic scattering regime, which is only applicable to sub-wavelength sized particles. In this regime it was found that metallic nano-spheroids can produce absorption enhancements of about two orders of magnitude on the material in their vicinity, due to their strong plasmonic resonance. The frequency of such resonance can be tuned with the shape of the particles, allowing us to match it with the optimal transition energies of the intermediate band material. Since these metallic nanoparticles (MNPs) are to be inserted inside the cell photovoltaic medium, they should be coated by a thin insulating layer to prevent electron-hole recombination at their surface. This analysis is then generalized, using an analytical separation-of-variables method implemented in Mathematica7.0, to compute scattering by spheroids of any size and material. This code allowed the study of the scattering properties of wavelengthsized particles (mesoscopic regime), and it was verified that in this regime dielectric spheroids perform better than metallic. The light intensity scattered from such dielectric spheroids can have more than two orders of magnitude than the incident intensity, and the focal region in front of the particle can be shaped in several ways by changing the particle geometry and/or material. Experimental work was also performed in this PhD to implement in practice the concepts studied in the analysis of sub-wavelength MNPs. A wet-coating method was developed to self-assemble regular arrays of colloidal MNPs on the surface of several materials, such as silicon wafers, amorphous silicon films, gallium arsenide and glass. A series of thermal and chemical tests have been performed showing what treatments the nanoparticles can withstand for their embedment in a photovoltaic medium. MNPs arrays are then inserted in an amorphous silicon medium to study the effect of their plasmonic near-field enhancement on the absorption spectrum of the material. The self-assembled arrays of MNPs constructed in these experiments inspired a new strategy for fabricating IBSCs using colloidal quantum dots (CQDs). Such CQDs can be deposited in self-assembled monolayers, using procedures similar to those developed for the patterning of colloidal MNPs. The use of CQDs to form the intermediate band presents several important practical and physical advantages relative to the conventional dots epitaxially grown by the Stranski-Krastanov method. Besides, this provides a fast and inexpensive method for patterning binary arrays of QDs and MNPs, envisioned in the theoretical part of this thesis, in which the MNPs act as antennas focusing the light in the QDs and therefore boosting their absorption

Estudio de la reactividad álcali-sílice originada por componentes reactivos minoritarios

El objetivo de la presente tesis se enmarca dentro del estudio del estado de hormigones de presas, desarrollado en los últimos años en el Laboratorio Central del CEDEX, en el que se ratifica que una de las causas más importantes del deterioro de obras hidráulicas en España es la reacción álcali-sílice. La tesis que se presenta pretende contribuir al mejor conocimiento de la reacción álcali sílice con fines normativos preventivos, abordando los aspectos relativos a la identificación de áridos reactivos en el hormigón. El conocimiento de los áridos reactivos en España (origen de la reactividad, tipos de reacción y su comportamiento, así como las herramientas disponibles para su detección) es imprescindible para evitar la futura aparición de esta patología en nuevas estructuras, ya sea evitando el uso de áridos reactivos o tomando las medidas preventivas necesarias si su utilización es inevitable. A partir del Estudio Bibliográfico realizado se han detectado diversas lagunas en la identificación y caracterización de áridos de reacción rápida, cuya característica principal es que son reactivos con concentraciones muy bajas de diferentes componentes reactivos. Para resolver las lagunas identificadas se ha planeado un estudio experimental, consistente en el análisis de áridos cuya reactividad es conocida porque han sido empleados en obras afectadas por la reacción álcali sílice. Sobre el árido grueso extraído de estas estructuras se han realizado una serie de ensayos normalizados (estudio petrográfico, ensayo acelerado de probetas de mortero, ensayo Gel Pat y ensayos químicos). El análisis de los resultados experimentales ha permitido conocer las limitaciones reales en áridos reactivos españoles de las diferentes técnicas existentes, tratando de minimizarlas para áridos cuya reactividad es debida a componentes minoritarios (áridos de reacción rápida). Además, se ha evaluado la utilización de la difracción de rayos X (no normalizada) y la creación de un nuevo ensayo (Gel Pat Modificado). Finalmente, el estudio experimental ha permitido fijar una metodología de ensayo para el estudio de áridos reactivos por su contenido en componentes minoritarios (áridos de reacción rápida). The objective of this Thesis fits into the research program developed in CEDEX the last years and focused on the durability of concrete in Dams. This research work confirms that one of the main problems related to the deterioration of hydraulic structures is the alkali silica reaction. This Thesis aims to contribute to a better understanding of alkali-silica reaction, for preventive regulation purposes, considering the aspects related to the identification of reactive aggregates. The knowledge of Spanish reactive aggregates (origin of the reactivity, types of reaction and their behavior, and the tools available to detect and describe them) is essential to avoid the appearance of this pathology in new structures, either not using the reactive aggregate or taking the necessary preventive measures available in bibliography if the use of the reactive aggregate is inevitable. From the State-of –the-Art developed, several gaps have been detected in the detection and description of rapid reactive aggregates, which main characteristic if that they are reactive with low content of some reactive components. An experimental programme has been designed to solve these gaps, consisting on studying the reactivity of aggregates used in Spanish structures affected by the alkali silica reaction. Several Standard Tests have been carried out on coarse aggregates removed from the affected structures (Petrographic description, Accelerated Mortar Bar Test, Gel Pat Test and Chemical Tests). The analysis of the results obtained in Spanish reactive aggregates allows to know the advantages and limitations of each test, trying to minimize the disadvantages to detect Spanish reactive aggregates because of the minority content of rapid reactive components (rapid reactive aggregates). Moreover, X ray diffraction (not standardized) has been tested to detect rapid reactive aggregates and also a new test has been developed for the same purpose (Optimized Gel Pat Test). Finally, the experimental programme has made possible to define a methodology for detection of Spanish rapid reactive aggregates.

The applications of the dioximes to analytical chemistry

Bibliography: [8] p. at end.

Power plant chemistry ... y Augustus H. Gill ...

Formerly published under the title of Engine room chemistry.