Using floating car data to analyse the effects of ITS measures and eco-driving

The road transportation sector is responsible for around 25% of total man-made CO2 emissions worldwide. Considerable efforts are therefore underway to reduce these emissions using several approaches, including improved vehicle technologies, traffic management and changing driving behaviour. Detailed traffic and emissions models are used extensively to assess the potential effects of these measures. However, if the input and calibration data are not sufficiently detailed there is an inherent risk that the results may be inaccurate. This article presents the use of Floating Car Data to derive useful speed and acceleration values in the process of traffic model calibration as a means of ensuring more accurate results when simulating the effects of particular measures. The data acquired includes instantaneous GPS coordinates to track and select the itineraries, and speed and engine performance extracted directly from the on-board diagnostics system. Once the data is processed, the variations in several calibration parameters can be analyzed by comparing the base case model with the measure application scenarios. Depending on the measure, the results show changes of up to 6.4% in maximum speed values, and reductions of nearly 15% in acceleration and braking levels, especially when eco-driving is applied.

An evaluation of the applicability of existing data to the analytical description of a nuclear-reactor accident : quarterly progress report for ... through ....

Includes bibliographical references.

Mining Police-Recorded Offence and Incident Data to Inform a Definition of Repeat Domestic Abuse Victimization for Statistical Reporting

Following inspections in 2013 of all police forces, Her Majesty’s Inspectorate of Constabulary found that one-third of forces could not provide data on repeat victims of domestic abuse (DA) and concluded that in general there were ambiguities around the term ‘repeat victim’ and that there was a need for consistent and comparable statistics on DA. Using an analysis of police-recorded DA data from two forces, an argument is made for including both offences and non-crime incidents when identifying repeat victims of DA. Furthermore, for statistical purposes the counting period for repeat victimizations should be taken as a rolling 12 months from first recorded victimization. Examples are given of summary statistics that can be derived from these data down to Community Safety Partnership level. To reinforce the need to include both offences and incidents in analyses, repeat victim chronologies from policerecorded data are also used to briefly examine cases of escalation to homicide as an example of how they can offer new insights and greater scope for evaluating risk and effectiveness of interventions.

A novel chemiluminescent immunoassay for microcystin (MC) detection based on gold nanoparticles label and its application to MC analysis in aquatic environmental samples

A novel chemiluminescent immunoassay method based on gold nanoparticles was developed for the detection of microcystins (MCs). The immunoassay included three main steps: indirect competitive immunoreaction, oxidative dissolution of gold nanoparticles, and indirect determination for MCs with Au3+-catalysed luminol chemiluminesent system. The method has a wide working range (0.05-10 mu g L-1, r(2) = 0.9914), the limit of detection was determined to be 0.024 mu g L-1, which is much lower than the World Health Organization's proposed guidelines (1 mu g L-1) for drinking-water. The proposed method was applied to MC analysis in natural water and fish tissue samples, and most results in the proposed method were in agreement with the conventional indirect competitive enzyme-linked immunosorbent assay method, which indicated that the new chemiluminescent immunoassay was sensitive, reliable, and suitable for MC analysis in natural water and fish tissue samples.

Obtaining data to validate a model of an induction skull melting furnace

A casting route is often the most cost-effective means of producing engineering components. However, certain materials, particularly those based on Ti, TiAl and Zr alloy systems, are very reactive in the molten condition and must be melted in special furnaces. Induction Skull Melting (ISM) is the most widely-used process for melting these alloys prior to casting components such as turbine blades, engine valves, turbocharger rotors and medical prostheses. A major research project is underway with the specific target of developing robust techniques for casting TiAl components. The aims include increasing the superheat in the molten metal to allow thin section components to be cast, improving the quality of the cast components and increasing the energy efficiency of the process. As part of this, the University of Greenwich (UK) is developing a computer model of the ISM process in close collaboration with the University of Birmingham (UK) where extensive melting trials are being undertaken. This paper describes the experimental measurements to obtain data to feed into and to validate the model. These include measurements of the true RMS current applied to the induction coil, the heat transfer from the molten metal to the crucible cooling water, and the shape of the column of semi-levitated molten metal. Data are presented for Al, Ni and TiAl.

A comparison of self-report and health care provider data to assess surveillance definitions of influenza-like illness in outpatients

Objective: Several surveillance definitions of influenza-like illness (ILI) have been proposed, based on the presence of symptoms. Symptom data can be obtained from patients, medical records, or both. Past research has found that agreements between health record data and self-report are variable depending on the specific symptom. Therefore, we aimed to explore the implications of using data on influenza symptoms extracted from medical records, similar data collected prospectively from outpatients, and the combined data from both sources as predictors of laboratory-confirmed influenza. Methods: Using data from the Hutterite Influenza Prevention Study, we calculated: 1) the sensitivity, specificity and predictive values of individual symptoms within surveillance definitions; 2) how frequently surveillance definitions correlated to laboratory-confirmed influenza; and 3) the predictive value of surveillance definitions. Results: Of the 176 participants with reports from participants and medical records, 142 (81%) were tested for influenza and 37 (26%) were PCR positive for influenza. Fever (alone) and fever combined with cough and/or sore throat were highly correlated with being PCR positive for influenza for all data sources. ILI surveillance definitions, based on symptom data from medical records only or from both medical records and self-report, were better predictors of laboratory-confirmed influenza with higher odds ratios and positive predictive values. Discussion: The choice of data source to determine ILI will depend on the patient population, outcome of interest, availability of data source, and use for clinical decision making, research, or surveillance. © Canadian Public Health Association, 2012.

The connection of natural and revealed theology: being an attempt to illustrate the evidences and doctrines of Christianity by their relation to the inductive philosophy of the human mind ... /

Mode of access: Internet.

The constitution and by-laws of the Independent Company of Cadets : with extracts from the laws of the U. States and the militia laws of Massachusetts : to which is prefixed an order of Lt. Colonel David Sears, with authority for the formation of a full battalion : accompanied by papers and documents relative to the Divisionary Corps of Independent Cadets.

Mode of access: Internet.