State Transition Based Embedding in Cepstrum Domain for Audio Copyright Protection

In this paper, we propose a new state transition based embedding (STBE) technique for audio watermarking with high fidelity. Furthermore, we propose a new correlation based encoding (CBE) scheme for binary logo image in order to enhance the payload capacity. The result of CBE is also compared with standard run-length encoding (RLE) compression and Huffman schemes. Most of the watermarking algorithms are based on modulating selected transform domain feature of an audio segment in order to embed given watermark bit. In the proposed STBE method instead of modulating feature of each and every segment to embed data, our aim is to retain the default value of this feature for most of the segments. Thus, a high quality of watermarked audio is maintained. Here, the difference between the mean values (Mdiff) of insignificant complex cepstrum transform (CCT) coefficients of down-sampled subsets is selected as a robust feature for embedding. Mdiff values of the frames are changed only when certain conditions are met. Hence, almost 50% of the times, segments are not changed and still STBE can convey watermark information at receiver side. STBE also exhibits a partial restoration feature by which the watermarked audio can be restored partially after extraction of the watermark at detector side. The psychoacoustic model analysis showed that the noise-masking ratio (NMR) of our system is less than -10dB. As amplitude scaling in time domain does not affect selected insignificant CCT coefficients, strong invariance towards amplitude scaling attacks is also proved theoretically. Experimental results reveal that the proposed watermarking scheme maintains high audio quality and are simultaneously robust to general attacks like MP3 compression, amplitude scaling, additive noise, re-quantization, etc.

New generation of two-dimensional spintronic systems realized by coupling of Rashba and Dirac fermions

Intriguing phenomena and novel physics predicted for two-dimensional (2D) systems formed by electrons in Dirac or Rashba states motivate an active search for new materials or combinations of the already revealed ones. Being very promising ingredients in themselves, interplaying Dirac and Rashba systems can provide a base for next generation of spintronics devices, to a considerable extent, by mixing their striking properties or by improving technically significant characteristics of each other. Here, we demonstrate that in BiTeI@PbSb2Te4 composed of a BiTeI trilayer on top of the topological insulator (TI) PbSb2Te4 weakly- and strongly-coupled Dirac-Rashba hybrid systems are realized. The coupling strength depends on both interface hexagonal stacking and trilayer-stacking order. The weakly-coupled system can serve as a prototype to examine, e.g., plasmonic excitations, frictional drag, spin-polarized transport, and charge-spin separation effect in multilayer helical metals. In the strongly-coupled regime, within similar to 100 meV energy interval of the bulk TI projected bandgap a helical state substituting for the TI surface state appears. This new state is characterized by a larger momentum, similar velocity, and strong localization within BiTeI. We anticipate that our findings pave the way for designing a new type of spintronics devices based on Rashba-Dirac coupled systems.

Thin-zone TAP reactor as a basis of �state-by-state transient screening

Thin-zone TAP reactor is presented as a basis of the new state-by-state transient screening approach which has been proposed by the authors for non-steady-state kinetic characterization of industrial catalysts. The general thin-zone TAP reactor model is described, and its mathematical status is justified analytically. It is shown that this model provides high enough accuracy to be applicable in the wide conversion interval (up to 90%), which is an important advantage of this approach compared with the traditional differential reactor.

Organising for growth:Irish state administration 1958-2008

This paper analyses some key features of Irish public administration as it has developed since the foundation of the state, paying particular attention to the period from the late 1950s onward. During these decades, notwithstanding successive waves of concern expressed over the need for public sector reform, the evidence suggests an underlying lack of coherence in the evolution of the public administrationsystem that resulted in a poor capacity for effective policy coordination. Yet the drive toward economic modernisation also resulted in the creation of new state competence to support industrial development both directly and indirectly. These changes can be tracked organisationally, drawing on the database of the IRCHSS-funded Mapping the Irish State project.

Topological order in a broken-symmetry state

À travers cette thèse, nous revisitons les différentes étapes qui ont conduit à la découverte des isolants topologiques, suite à quoi nous nous penchons sur la question à savoir si une phase topologiquement non-triviale peut coexister avec un état de symétrie brisée. Nous abordons les concepts les plus importants dans la description de ce nouvel état de la matière, et tentons de comprendre les conséquences fascinantes qui en découlent. Il s’agit d’un champ de recherche fortement alimenté par la théorie, ainsi, l’étude du cadre théorique est nécessaire pour atteindre une compréhension profonde du sujet. Le chapitre 1 comprend un retour sur l’effet de Hall quantique, afin de motiver les sections subséquentes. Le chapitre 2 présente la première réalisation d’un isolant topologique à deux dimensions dans un puits quantique de HgTe/CdTe, suite à quoi ces résultats sont généralisés à trois dimensions. Nous verrons ensuite comment incorporer des principes de topologie dans la caractérisation d’un système spécifique, à l’aide d’invariants topologiques. Le chapitre 3 introduit le premier dérivé de l’état isolant topologique, soit l’isolant topologique antiferromagnétique (ITAF). Après avoir motivé théoriquement le sujet et introduit un invariant propre à ce nouvel état ITAF, qui est couplé à l’ordre de Néel, nous explorons, dans les chapitres 4 et 5, deux candidats de choix pour la phase ITAF : GdBiPt et NdBiPt.

Neurofuzzy state identification using prefiltering

A new state estimator algorithm is based on a neurofuzzy network and the Kalman filter algorithm. The major contribution of the paper is recognition of a bias problem in the parameter estimation of the state-space model and the introduction of a simple, effective prefiltering method to achieve unbiased parameter estimates in the state-space model, which will then be applied for state estimation using the Kalman filtering algorithm. Fundamental to this method is a simple prefiltering procedure using a nonlinear principal component analysis method based on the neurofuzzy basis set. This prefiltering can be performed without prior system structure knowledge. Numerical examples demonstrate the effectiveness of the new approach.

A state space based approach in non-linear hemodynamic response modeling with fMRI data

In this paper we use the modified and integrated version of the balloon model in the analysis of fMRI data. We propose a new state space model realization for this balloon model and represent it with the standard A,B,C and D matrices widely used in system theory. A second order Padé approximation with equal numerator and denominator degree is used for the time delay approximation in the modeling of the cerebral blood flow. The results obtained through numerical solutions showed that the new state space model realization is in close agreement to the actual modified and integrated version of the balloon model. This new system theoretic formulation is likely to open doors to a novel way of analyzing fMRI data with real time robust estimators. With further development and validation, the new model has the potential to devise a generalized measure to make a significant contribution to improve the diagnosis and treatment of clinical scenarios where the brain functioning get altered. Concepts from system theory can readily be used in the analysis of fMRI data and the subsequent synthesis of filters and estimators.

Helminths of Lizards (Reptilia: Squamata) from Mato Grosso State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Observation of a New Xi(b) Baryon

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Observation of an Excited B±c Meson State with the ATLAS Detector

A search for excited states of the B ± c meson is performed using 4.9  fb −1 of 7 TeV and 19.2  fb −1 of 8 TeV pp collision data collected by the ATLAS experiment at the LHC. A new state is observed through its hadronic transition to the ground state, with the latter detected in the decay B ± c →J/ψπ ± . The state appears in the m(B ± c π + π − )−m(B ± c )−2m(π ± ) mass difference distribution with a significance of 5.2 standard deviations. The mass of the observed state is 6842±4±5  MeV , where the first error is statistical and the second is systematic. The mass and decay of this state are consistent with expectations for the second S -wave state of the B ± c meson, B ± c (2S) .

Estimating the modal parameters from multiple measurement setups using a joint state space model

Computing the modal parameters of structural systems often requires processing data from multiple non-simultaneously recorded setups of sensors. These setups share some sensors in common, the so-called reference sensors, which are fixed for all measurements, while the other sensors change their position from one setup to the next. One possibility is to process the setups separately resulting in different modal parameter estimates for each setup. Then, the reference sensors are used to merge or glue the different parts of the mode shapes to obtain global mode shapes, while the natural frequencies and damping ratios are usually averaged. In this paper we present a new state space model that processes all setups at once. The result is that the global mode shapes are obtained automatically, and only a value for the natural frequency and damping ratio of each mode is estimated. We also investigate the estimation of this model using maximum likelihood and the Expectation Maximization algorithm, and apply this technique to simulated and measured data corresponding to different structures.

Todo nordeste que couber a gente publica: o The New York Times e as representações do nordeste brasileiro na era da política da boa vizinhança (1933-1945)

The Brazilian Northeast has been a constant subject for journalists of one of the world's leading media companies - The New York Times - between 1933 and 1945. This time, the US government implemented a new foreign policy for Latin America - known as the Good Neighbor Policy. It preached, various points including more respect and attention to the countries south of U.S. borders. Because of her geostrategic importance, Brazil was one of the countries that received the most attention of the bureaucracy and American press. This study investigates the multiple Northeast representations formulated in The New York Times' pages when the Americans were spotlight is on the region. It delineates similarities and differences between the NYT, the press and the governments of the United States and Brazil from the ways of conceiving this particular part of Brazil. Through the analysis of texts, photographs and maps, it is dedicated to establish connections between spaces, press and politics of the 1930s and 1940s. These decades there were relevant changes in the political landscape of both countries that permeated the news, reports and articles of NYT. Circumstances such as the 1935 armed uprisings - known as Communist Conspiracy - the installation and operation of the New State, and especially the Brazilian and US participation in World War II and the bilateral negotiations on the installation of US bases in Brazil were cardinal for the various Northeast images that circulated in the publication. The region was repeatedly subject of correspondent of the New York newspaper in Brazil, Frank M. Garcia, but also present on matters of professionals responsible for various sections: review of books, publishing, tourism, foreign affairs, etc. Along the investigated period, the visions of the region made in the articles published in the newspaper that suffered major metamorphoses. Starting with Northeast of the drought, famine and death recurrent in Brazilian literature to the most dangerous point for hemispheric defense, passing through representations of the American West lawless nineteenth century and the Latin America marked by the dominance of exotic nature and stagnation, a space to be transformed by the US technical knowledge.

Latent degradation indicators estimation and prediction : a Monte Carlo approach

Asset health inspections can produce two types of indicators: (1) direct indicators (e.g. the thickness of a brake pad, and the crack depth on a gear) which directly relate to a failure mechanism; and (2) indirect indicators (e.g. the indicators extracted from vibration signals and oil analysis data) which can only partially reveal a failure mechanism. While direct indicators enable more precise references to asset health condition, they are often more difficult to obtain than indirect indicators. The state space model provides an efficient approach to estimating direct indicators by using indirect indicators. However, existing state space models to estimate direct indicators largely depend on assumptions such as, discrete time, discrete state, linearity, and Gaussianity. The discrete time assumption requires fixed inspection intervals. The discrete state assumption entails discretising continuous degradation indicators, which often introduces additional errors. The linear and Gaussian assumptions are not consistent with nonlinear and irreversible degradation processes in most engineering assets. This paper proposes a state space model without these assumptions. Monte Carlo-based algorithms are developed to estimate the model parameters and the remaining useful life. These algorithms are evaluated for performance using numerical simulations through MATLAB. The result shows that both the parameters and the remaining useful life are estimated accurately. Finally, the new state space model is used to process vibration and crack depth data from an accelerated test of a gearbox. During this application, the new state space model shows a better fitness result than the state space model with linear and Gaussian assumption.

Re-thinking how we plan to address technically complex problems : drawing on planning theory to guide practice in revision of land use plans in coastal high hazard zones

Queensland's new State Planning Policy for Coastal Protection, released in March and approved in April 2011 as part of the Queensland Coastal Plan, stipulates that local governments prepare and implement adaptation strategies for built up areas projected to be subject to coastal hazards between present day and 2100. Urban localities within the delineated coastal high hazard zone (as determined by models incorporating a 0.8 meter rise in sea level and a 10% increase in the maximum cyclone activity) will be required to re-evaluate their plans to accommodate growth, revising land use plans to minimise impacts of anticipated erosion and flooding on developed areas and infrastructure. While implementation of such strategies would aid in avoidance or minimisation of risk exposure, communities are likely to face significant challenges in such implementation, especially as development in Queensland is so intensely focussed upon its coasts with these new policies directing development away from highly desirable waterfront land. This paper examines models of planning theory to understand how we plan when faced with technically complex problems towards formulation of a framework for evaluating and improving practice.

Proposing and developing the definition and conceptual framework for healthcare resilience to cope with disasters

Building healthcare resilience is an important step towards creating more resilient communities to better cope with future disasters. To date, however, there appears to be little literature on how the concept of healthcare resilience should be defined and operationalized with a conceptual framework. This article aims to build a comprehensive healthcare disaster management approach guided by the concept of resilience. Methods: Google and major health electronic databases were searched to retrieve critical relevant publications. A total of 61 related publications were included, to provide a comprehensive overview of theories and definitions relevant to disaster resilience. Results and Discussions: Resilience is an inherent and adaptive capacity to cope with future uncertainty, through multiple strategies with all hazards approaches, in an attempt to achieve a positive outcome with linkage and cooperation. Healthcare resilience can be defined as the capability of healthcare organisations to resist, absorb, and respond to the shock of disasters while maintaining the most essential functions, then recover to their original state or adapt to a new state. It can be assessed by criteria, namely: robustness, redundancy, resourcefulness; and a complex of key dimensions, namely: vulnerability and safety, disaster resources and preparedness, continuity of essential health services, recovery and adaptation. Conclusions: This new concept places healthcare organisations’ disaster capabilities, management tasks, activities and disaster outcomes together into a comprehensive whole view, using an integrated approach and establishing achievable goals.