Materiais compósitos com incorporação de cânhamo industrial

Projeto de Investigação integrado de mestrado Internacional em Sustentabilidade do Ambiente Construído

Aspects of peridomiciliary ecotopes in rural areas of Northeastern Brazil associated to triatomine (Hemiptera, Reduviidae) infestation, vectors of Chagas disease

Artificial ecotopes of 121 peridomiciliary environments in four rural localities in the state of Ceará, Brazil, were studied and the type of material of the ecotopes was identified as triatomine infestation. Two thousand two hundred and four Triatoma brasiliensis Neiva, 340 Triatoma pseudomaculata Corrêa and Espínola, 121 Rhodnius nasutus Stall, and 5 Panstrongylus lutzi (Neiva and Pinto) were captured. Out of the 323 ecotopes found (X =2.0 ± 1.8 per dwelling) such as pigpens, henhouses, corrals, perches, dovecotes, piles of roofing tiles, bricks, wood, and straw 30.3% were infested by triatomines in all different developmental stages, including eggs. A substantial number of triatomines were found in perches, however the largest infestation took place in roofing materials used in the construction of goat/sheep corrals, henhouses, and pigpens, where 98% of them were captured: 1372 triatomines were located in the roofing tile covers, 285 in the straw, 187 in the perches, 77 in the coverings of roofing tiles and straw, and 13 in the straw and wood. Among all the different pile of materials, roofing tiles were the most infested (50%) followed by bricks (38.9%) and woods (36.1%). T. brasiliensis colonized mainly brick piles (chi2=16.539; p < 0.05) and roofing tiles (chi2=5,090.58; p < 0.05); T. pseudomaculata preferred wood perches (chi2= 472.39; p < 0.05) and woodpiles (chi2=126.0 p < 0.05), and R. nasutus was principally found in roofing straw (chi2=384.43; p < 0.05). These findings suggest that triatomines tend to colonize peridomiciliary ecotopes similar to their original habitats.

Vesikiertoisen ja kaapeleilla toteutetun lattialämmityksen teknistaloudellinen vertailu

Lopputyössä vertailtiin vesikiertoisen ja kaapeleilla toteutetun lattialämmityksen erilai-sia ominaisuuksia. Vertailuparametreinä olivat lattialämmitysten mitoitus, säätö, asen-nus, investointikustannukset, käyttökustannukset, vikaantuminen ja korjaus, asumis-viihtyvyys, käyttöön liittyvät tekijät, markkinat ja toimijat sekä lattian päällysteet. Näistä lat-tialämmityksien asumisviihtyvyys, säätö ja kustannukset otettiin tarkempaan vertailuun. Lämmitysjärjestelmien kokonaiskustannuksia vertailtiin 25 vuoden jaksolla ja 4 % ko-rolla. Investointikustannuksiin sisältyi lämmitysjärjestelmien lisäksi lkv-varaajan ja tek-nisen tilan kustannukset sekä liittymismaksut. Käyttökustannusten vertailussa otettiin huomioon lämmityskulujen lisäksi myös lämmityksen hyötysuhde, yö- ja päiväsähköosuudet ja -energian hinnat, taloussähkön kustannukset, perusmaksut sekä huoltokulut. Tutkimuksen mukaan halvin pientalojen lämmitysmuoto on osittain varaava huonekoh-tainen sähkölämmitys, jonka vuosittaisiksi kustannuksiksi tuli 11452 mk. Sähkölämmi-tyksen tekee vertailtavista halvimmaksi lämmitysjärjestelmäksi pientaloille (n. 150 m2) sen pienet pääomakustannukset, lämmityksen hyvä hyötysuhde sekä varsin kilpailuky-kyiset käyttökustannukset. Vertailun kallein oli öljyä energialähteenä käyttävä vesikiertoi-nen lattialämmitys, jonka vuosittaisiksi kustannuksiksi tuli 13080 mk. Öljy on energia-hinnaltaan halpa, mutta öljylämmityksen huono hyötysuhde sekä varsin korkeat pää-omakustannukset tekevät siitä vertailtavista kalleimman lämmitysmuodon. Energian hin-tojen herkkyysanalyysissä huomattiin sähkön säilyttävän kilpailukykynsä, vaikka öljyn ja maakaasun hinnat laskisivatkin huomattavasti. Asumismukavuuden ja säädön kohdalla vertailtiin lämpötilojen tasaisuutta huonetilois-sa. Mittauskohteiden huonelämpötiloja on seurattu eri projekteissa jatkuvatoimisesti jo-pa yli kahden vuoden ajan. Mittaustulosten mukaan vesikiertoisella lattialämmityksellä huonelämpötilat ovat tasaisemmat kuin osittain varaavalla huonekohtaisella sähköläm-mityksellä. Tämä johtuu sähkölämmityksen varaavuudesta. Hyvillä yhdistelmätermostaateilla päästään tosin myös huonekohtaisen sähkölämmityksen yhteydessä tasaisiin huonelämpötiloihin. Molempien lämmitysmuotojen säädön heikkoutena on hidas reagointi sisäisten lämmönlähteiden aiheuttamaan nopeaan sisälämpötilan nousuun.

Quantificação de fluxos de mercúrio gasoso na interface solo/atmosfera utilizando câmara de fluxo dinâmica: aplicação na bacia do Rio Negro

Gaseous mercury sampling conditions were optimized and a dynamic flux chamber was used to measure the air/surface exchange of mercury in some areas of the Negro river basin with different vegetal coverings. At the two forest sites (flooding and non-flooding), low mercury fluxes were observed: maximum of 3 pmol m-2 h-1 - day and minimum of -1 pmol m-2 h-1 - night. At the deforested site, the mercury fluxes were higher and always positive: maximum of 26 pmol m-2 h-1 - day and 17 pmol m-2 h-1 - night. Our results showed that deforestation could be responsible for significantly increasing soil Hg emissions, mainly because of the high soil temperatures reached at deforested sites.

Integração do elemento vegetal no edificado

Esta dissertação é muito mais do que um trabalho sobre ajardinamento de edifícios, pois pretende-se que seja uma ferramenta de ajuda em benefício da transformação de milhares de metros quadrados, das coberturas e das fachadas, muitas vezes negligenciados, em espaços verdes públicos beneficiando, não somente, os promotores imobiliários mas, acima de tudo os seus ocupantes e usufrutuários, que desta forma podem tirar partido de novos espaços de estar, ao ar livre. Enquanto a cidade, ao nível térreo, apresenta um aumento de tráfego rodoviário, com inegável poluição e confusão, é possível, desta forma, usufruir de um espaço aberto. Esta dissertação procura estudar os edifícios que já integram o elemento vegetal no seu conceito e que sejam um sucesso na forma como usam o elemento vegetal, de modo a divulgar as técnicas de construção, entender as decisões dos projectistas e o impacto nos utilizadores que habitam e usufruem dos espaços – Análise-Pós-Ocupação. Esta dissertação pretende demonstrar o quanto é importante que as cidades apresentem espaços verdes para uso da população. As zonas verdes existentes nas cidades são inequivocamente um importante indicador da qualidade ambiental existente nessas mesmas cidades. As coberturas e fachadas verdes arrefecem os edifícios, capturam e filtram as águas da chuva, proporcionam habitat à vida selvagem, reduzem o efeito de estufa das cidades, proporcionam uma preciosidade estética, uma experiência recreativa e por vezes comida, para os habitantes das cidades. Pretende-se assim, focar os benefícios humanos, sociais e naturais que se obtêm ao introduzir vegetação nas paredes, terraços, pátios e coberturas dos edifícios. Assim foi considerado útil usar uma metodologia para também analisar o tipo de espécies usadas nos estudos de caso, e determinar a necessidade de uma ferramenta para que a selecção vegetal respeite critérios de biodiversidade e melhor adaptabilidade aos ecossistemas locais, sabendo de antemão que não podem nem pretendem substituir os habitats naturais, que as cidades também podem e devem apresentar.

Desenvolvimento de argamassa para restauração utilizando resíduo do polimento do porcelanato

The coatings mortars are essential elements of building structures because they execute an important role in protecting walls and are particularly exposed to aggressive action responsible for its degradation over time. The importance of wall coverings has been the subject of discussion and analysis in the conservation and rehabilitation of old buildings. Are sometimes removed and replaced with inappropriate solutions of constructive point of view or architecture. The most commonly used coatings on walls of old buildings is based on traditional hydraulic lime mortars. The present study aims at the formulation of new lime- based mortars and aerial fine aggregate, in order to contribute to a better field of conservation and restoration mortar coating of old buildings. Residue was used for polishing porcelain as fine aggregate, replacing the aggregate (sand), in percentages 05-30% by mass. We conducted a thorough evaluation of the mortar properties in fresh and hardened state by comparing the performance of the same with a reference mortar. The residue used was characterized as the density, bulk density, and particle size laser, scanning electron microscopy, X-ray diffraction and X-ray fluorescence. Formulations were produced 7, 6 with residue and one commonly used formulation, which served as a reference. In the formulations of lime mortars air (hydrated lime powder CH-I) has been adopted a stroke volume (1:3) with constant binder, was varied and the water / binder and aggregate and waste. For evaluation of mortars fresh, proceeded to consistency analysis, specific gravity, water retention and air content embedded. In the hardened state assays were performed in specific gravity, water retention, modulus of elasticity, tensile strength in bending, compressive strength, water absorption by capillary action, adhesion, tensile strength, resistance to shrinkage and salts by of crystallization trials with resources chloride solution, nitrate and sulfate all sodium in prismatic at 90 days of age, in addition to the micro structural analysis of mortars. Based on the results we can see that the mortar formulated with 10% content of waste and the reference free retraction feature more stable closer to neutrality. The composition of 10% was obtained better performance against the action of the salt crystallization. The mortar with 15% residue obtained better density, lower air content embedded and high capacity for water retention developing good workability. The replacement of 20% of waste generates a satisfactory utilization of resistance to compression, flexion and traction grip the base. And, finally, it can be seen that the mortar with 10, 15 and 20% residual show, in principle, good suitability as coatings, thus enabling a final result consistent with durability, workability and aesthetics developing therefore a material with better performance to repair or replace existing mortars in old buildings

Estudo de Matérias-Primas do Rio Grande do Norte para Uso em Revestimento Poroso: Influência do teor de dolomita e temperatura de calcinação nas propriedades físico-mecânicas

The state of Rio Grande do Norte presents a great potentiality for the production of ceramic tiles because of having natural raw material in quantity and quality making its economical exploration possible, beyond the great energetic differential of the state, the natural gás. This works aims to study the influence of the dolomite and granulometry concentration and calcinations temperature in the obtaining of formulations for porous coverings which have to be coherent to the project,s specifications. The experiments have involved the physical-chemical and mineralogical characterizations of raw materials and mechanical tests in the dry and burnt proof bodies preceding a mixture experiment planning with the use of the response surface methodology, in order to get the best raw materials combinations to produce a ceramic mass with specific properties. The twelve ceramic masses studied in this work were prepared by the via dry process, characterized, shaped by uniaxial pressing and sinterized in the temperatures of 940ºC, 1000ºC, 1060ºC, 1120ºC and 1180ºC, using a fast burning cycle. The crystalline phases formed during the sintering in the temperatures in study have revealed the presence of anorthite and diopside beyond quartz with a remaining phase. These phases were the main responsible ones by the physical- mechanical properties of the sinterized proof bodies. The proof bodies after the sintering stage have presented water absorption higher than 10% and a good dimensional stability in all studied temperatures. However, the flexural breaking strength results in the temperatures of 940ºC, 1000ºC and 1060ºC, under the temperature zone of the vitrification of ceramic whiteware do not reach the flexural breaking strength specific for the porous wall tile (15 MPa), but in the temperature of 1120ºC next to the vitrification temperature zone, some whiteware ceramic (formulations) has reached the specified value for the porous wall tile. The results of this work have showed that the studied raw materials have great importance for used in the production of porous wall tiles (BIII)

Semeadora-adubadora: mecanismos de corte de palha e cargas verticais aplicadas

This work had as objective to evaluate the performance of mechanisms of cutting of the no-tillage seedrills in different vegetable coverings and applied vertical loads. The experimental design used was in randomized blocks and factorial scheme 3 x 4, with four replications. The trials were accomplished with three different mechanisms of culting of the straw (plane disc, corrugated disc and wavy disc), using four different vertical loads (750, 1500, 2250 and 3000 N). All treatments were accomplished in five straw coverings (corn, sorghum, triticale, black oats and radish). The results showed that larger the amount of dry matter covering the soil, higher the demand of horizontal and vertical forces. The wavy disc promotes the largest values of area of mobilized soil and requires large horizontal force, vertical force and horizontal force per area of cutting depth of discs (specific force). The treatment with plane disc required higher values of the horizontal forces per area of mobilized soil and of vertical force in the corn and sorghum coverings.

Decomposição de culturas de cobertura no sistema plantio direto, manejadas mecânica e quimicamente

O sistema plantio direto preconiza o uso de culturas de cobertura para produção de massa seca sobre o solo. O presente trabalho teve por objetivo estudar a produção e a taxa de decomposição de duas coberturas vegetais - crotalária juncea (Crotalária juncea L.) e mucuna-cinza (Stilozobium niveum L) - em três sistemas de manejo (rolo-faca, triturador de palhas e herbicida), e a capacidade de campo efetiva dos manejos. O experimento foi realizado na área do Laboratório de Máquinas e Mecanização Agrícola (LAMMA), do Departamento de Engenharia Rural, UNESP, Jaboticabal - SP, com delineamento em blocos ao acaso, em esquema fatorial 3x2, originando seis tratamentos, com quatro repetições. Foram analisadas as produções de massa seca das culturas de cobertura antes e após o manejo, a velocidade de deslocamento e a capacidade de campo efetiva para cada conjunto (trator-equipamento). As análises dos valores obtidos permitiram verificar que o fator manejo não interfere na decomposição da massa seca das coberturas vegetais e que as duas culturas de cobertura apresentaram massas semelhantes aos 30; 70 e 125 dias após a semeadura, diferindo aos 97 dias, época na qual a crotalária apresentou maior quantidade de massa seca. Aos 30; 51 e 71 dias após o manejo, as massas secas das culturas foram semelhantes. O manejo com herbicida apresentou maior capacidade de campo efetiva.

Vacinação e biossegurança: o olhar dos profissionais de enfermagem

The present study analyzes the conceptions and the nursing workers' practices about the relationship between vaccination and biosecurity in a public hospital of reference in communicable diseases in Natal/RN. It is treated, therefore, of a exploratory/descriptive study with qualitative and quantitative approach. They were constituted as collaborators of the research twenty-two nursing professionals, being five nurses, three auxiliary and fourteen technicians in nursing. The information were obtained through the interview technique with semi-structured route. In the quantitative approach, the information were analyzed by statistics and presented in form of tables and graphs to characterize the workers and the aspects related to the vaccination situation of the same ones; and in the qualitative approach, we used the method of content analysis. The analysis was accomplished starting from the categories empiric coming from the process of analysis of the field material, measure through inferences and interpretations based on the authors studied in the theoretical referential of the research. Starting from the analysis of the results, we verified that the nursing interviewees' workers establish in a clear way and it aims at, in your speeches, a direct relationship between vaccination and biosecurity besides attributing a meaning of great importance with relationship to the use of the vaccines in your professional lives in what refers to the control and decrease of the risks, above all the biological ones, to the which are exposed in the daily exercise of your functions. However, when analyzing those workers' vaccination situation, we verified that the vaccination covering still meets on this side of the expected for the vaccines of occupational interest, with prominence just for the vaccines against diphtheria and tetanus and to against hepatitis B, that presented coverings considered very good and above the national average. Considering that the institution, although has a service of health occupational active and offer some vaccines of occupational interest, it still presents a work of little mobilization in what refers to the consciousness and the workers' permanent education with relationship to the need and importance of the occupational vaccination, not only for your workers' protection, as well as measure in the infection control and, therefore, as safety for your patients/clients. We understood that that work type didn't still become politics guided by ministries of Health or of the Labor, however, it falls to the institutions that work for the interest of the workers' health to struggle for all and any action and mobilization that have as objective protects the workers of the risks in your work atmosphere

La Formación Corumbataí y su importancia en la industria cerámica del estado de São Paulo - Brasil

El desarrollo acelerado del polo cerámico de Santa Gertrudes (provincia de São Paulo) en la década de 90, fue causado principalmente por la localización privilegiada de la materia prima asociada al desarrollo tecnológico, las grandes reservas, el acceso fácil por autopistas que facilitan la distribución de los productos y la proximidad de los grandes centros consumidores. Este desarrollo facilitó que este Polo tuviera un boom en el inicio de 2007 en la fase de madurez con una producción de 367 millones de metros cuadrados, transformándose así en el mayor polo cerámico de las Américas. de acuerdo con los estudios geológicos realizados en este trabajo, las rocas de la Formación Corumbataí, origen de la materia prima usada en el polo cerámico, fueron clasificadas en cinco litofacies: maciza, laminada, intercalada I, intercalada II y alterada. Estas litofacies, por sus características mineralógicas y químicas, fueron consideradas arcillas illíticas con porcentaje medio de fundentes. Tomando como referencia las Normas para baldosas cerámicas, las características cerámicas obtenidas en el laboratorio demostraron que la mayoría de la materia prima es compatible con el grupo BIIb (Absorción de agua entre 6 y 10%).

Efeito da temperatura ambiente e do empenamento sobre o desempenho de frangas leves e semipesadas

Este trabalho foi conduzido para determinar os efeitos da temperatura ambiente e do empenamento das aves sobre o desempenho de duas linhagens de postura na fase de crescimento (10ª a 13ª semana de idade). Foram alojadas 480 aves de reposição da marca Hy-line, sendo 240 aves de cada linhagem W-36 (leve) e Brown (semipesada), em 5 câmaras climáticas com temperaturas de 12, 18, 24, 30 e 36ºC. em cada temperatura foram avaliadas 3 coberturas de pena; 100% (não depenada), 50% (depenada em 50% do corpo) e 0% (totalmente depenada). A análise estatística dos dados foi realizada segundo um esquema fatorial (5 x 3 x 2) sendo: 5 temperaturas, 3 porcentagens de cobertura de pena e 2 linhagens. Os dados foram submetidos a uma análise de regressão para a obtenção das curvas respostas com os melhores ajustes. A linhagem semipesada apresentou maior consumo de ração em relação à linhagem leve em todas as temperaturas. Houve diminuição do ganho de peso em função da redução no consumo de ração e aumento da temperatura. A linhagem leve apresentou uma maior amplitude nas faixas de conforto térmico (18,33ºC a 32,00ºC) do que a linhagem semipesada (23,75ºC a 29,50ºC).

Well productivity controlling factors in crystalline terrains of southeastern Brazil

Over the last decades, increasing water demands have fostered research to obtain high well yields in crystalline terrains where, besides the intrinsic properties of rocks, the groundwater flow depends on several factors. The depth of the wells, the lithotypes, the presence and thickness of sedimentary coverings and weathered layers, the landforms, the geological structures, and the effects of tectonic stresses are among the most investigated factors considered as determinant of well productivity. The influence of these factors on productivity of wells that exploit the Crystalline Aquifer System in the Jundiai-River Catchment, southeastern Brazil, is investigated in this work. The largest region of the studied area is located on the Precambrian Basement, partially covered by sedimentary deposits. The results show that the sedimentary deposits and the weathered layer are important for high well yield, but it also depends on the existence of a net of open fractures, in order to maintain high productivity. The sites that have more possibility of occurrence of such structures are the regional shear and fault zones and other minor structures with NW-SE and E-W directions, which characterize areas subjected to transtensional stress related to the neotectonics.

Alterações dos atributos químicos do solo e resposta da soja à cobertura vegetal e à calagem superficial na implantação do sistema de semeadura direta

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação de força de torção manual infantil: o design ergonômico aplicado ao desenvolvimento de tampas seguras para embalagens de domissanitários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)