电子辐照PVA/CMC共混水凝胶的成胶研究

本试验利用电子辐照PVA/CMC共混水凝胶,通过外观透明度、凝胶分数、溶胀度和红外光谱分析,研究了样品中结构的变化与外观透明度、凝胶分数和溶胀度的关系,以及辐照剂量对样品中结构和性能的影响。结果表明,不同比例的PVA与相同比例的CMC组成的共混水凝胶,经电子辐照后呈现不同的宏观特性。辐照样品萃取后得到的凝胶比萃取前的混合凝胶拥有更强的吸水性,表明辐照PVA/CMC共混凝胶形成了网状结构凝胶。几种竞争反应导致不同辐照剂量下混合凝胶中凝胶含量随PVA含量的变化变得复杂。辐照后样品的红外光谱分析显示,辐照使凝胶中部分仲醇中C上链接的H原子被取代而转变为叔醇,从而产生交联。

CMC聚合物对重金属离子的吸附性能

通过正交试验得出制备羧甲基纤维素(CMC)聚合物的最佳工艺条件:丙烯酸(AA)/羧甲基纤维素=10,引发剂(硫酸铵)和交联剂(N,N′-亚甲基双丙烯酰胺)用量分别为单体的0.0014倍和0.0015倍.吸胀平衡后,将CMC聚合物在400~450℃下完全灰化16h,消解并用火焰原子吸收法测定聚合物对Zn2+、Cu2+、Pb2+、Cd2+、Cr2+、Ni2+和Mn2+的吸附性能.结果表明,CMC聚合物对重金属离子具有一定的吸附能力,其吸附量随着溶液pH值和重金属离子质量浓度的增加而增大,当pH为9时达到最大;并且CMC聚合物对Pb2+和Cu2+的吸附量要大于其他金属离子.

Hydrogel of biodegradable cellulose derivatives. I. Radiation-induced crosslinking of CMC

Radiation crosslinking of carboxymethylcellulose (CMC) with a degree of substitution (DS) from 0.7 to 2.2 was the subject of the current investigation. CMC was irradiated in solid-state and aqueous solutions at various irradiation doses. The DS and the concentration of the aqueous solution had a remarkable affect on the crosslinking of CMC. Irradiation of CMC, even with a high DS, 2.2 in solid state, and a low DS, 0.7 in 10% aqueous solution, resulted in degradation. However, it was found that irradiation of CMC with a relatively high DS, 1.32, led to crosslinking in a 5% aqueous solution, and 20% CMC gave the highest gel fraction. CMC with a DS of 2.2 induced higher crosslinking than that with a DS of 1.32 at lower doses with the same concentration. Hence, it was apparent that a high DS and a high concentration in an aqueous solution were favorable for high crosslinking of CMC. It is assumed that; high radiation crosslinking of CMC was induced by the increased mobility of its molecules in water and by the formation of CMC radicals from the abstraction of H atoms from macromolecules in the intermediate products of water radiolysis. A preliminary biodegradation study confirmed that crosslinked CMC hydrogel can be digested by a cellulase enzyme. (C) 2000 John Wiley & Sons, Inc.

Morphology transcription process from CMC micelles to inorganogel and its effect on the properties of alumina particle

In this study, a carboxymethyl cellulose (CMC)-mediated sol-gel process was developed to synthesize the alumina hydoxide whiskers. During the process, inexpensive inorganic salts were used as precursors and supercritical drying method was used to extract the water in hydrogel. The influences of CMC on the gel formation and the particle morphology were investigated. The results show that the formation of CMC-aluminium hydroxide organic-inorganic hybridgels led to a morphology transcription process from CMC micelles to aluminium hydroxide gel, as a result, the precursor with whiskerious morphology was obtained.

7-3-20, course de côte d'Argenteuil [motocyclisme], Péan sur Peugeot [500 cmc] : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 58371

Coaches' use of and impressions of computer-mediated communication (CMC) media /

The study examined coaches' usage of text-based computer-mediated communication (CMC) media (e.g., text-messaging, email) in the coach-player relationship. Data were collected by surveying Ontario-based male baseball coaches (n = 86) who coached players between 15 and 18 years old. Predictions were made regarding how demographic factors such as age and coaching experience affected coaches' CMC use and opinions. Results indicated that over 76% of respondents never used any CMC media other than email and team websites in their interactions with players. Results also revealed that coaches' usage rates contrasted with their opinion of the usefulness of the media, and their perception of players' use of the media. Coaches characterized most CMC media as limited, unnecessary, and sometimes inappropriate. Additional research should explore players' CMC usage rates and possible guidelines for use of the new media in authority relationships. Academia needs to keep pace with the developments in this area.

Desarrollo de materiales híbridos nanoestructurados : CMC

Tesis (Maestro en Ciencias de la Ingeniería Mecánica con Especialidad en Materiales) UANL, 2011.

Does CMC fit? Practical legal training students' satisfaction with online discussion

Masters research paper submitted in fulfilment of the requirements for the degree of Master of Professional Education and Training. The objectives of this study were to investigate students’ perceptions and satisfaction regarding CMC activities, including community of inquiry framework elements and self-system factors, and to frame recommendations that might improve the use of online discussions as a teaching medium in practical legal training.

Adição de superplastificante e anti-segregante à base de CMC em pastas de cimento para Poços de Petróleo

Oil well cementing materials consist of slurries of Special class Portland cement dispersed in water. Admixtures can be used to provide the necessary fluidity, so the material can be efficiently pumped down as well as penetrate porous rocks with controlled filter loss. Construction admixtures can be used to modify the properties of oil well cements provided they can withstand and hold their properties at the higher than ambient temperatures usually encountered in oil fields. In civil construction, superplasticizer play the role of dispersants that reduce the facto r of water cement improve mechanical properties and fluidity of the cement, whereas anti-segregation agents improve the workability of the slurry. In the present study, oil well cement slurries were produced adding both a dispersant and an anti-segregation agent conventionally used in Portland CPII-Z-32 RS cement aiming at materials for primary cementing and squeeze operations. Three basic aspects were evaluated: fluidity, filter loss and the synergetic effect of the admixtures at two temperatures, i.e., 27°C and 56°C, following API RP 10B practical recommendations. The slurries were prepared using admixture concentrations varying from 2.60 Kgf/m3 (0.02 gallft3) to 5.82 Kgf/m3 (0.045 galJft3) BWOC. The density of the slurries was set to 1.89 g/cm3 (15.8 Ib/gal). 0.30 to 0.60% BWOC of a CMC-based anti-segregation agent was added to the cement to control the filter loss. The results showed that the addition of anti-segregation at concentrations above 0.55% by weight of cement resulted in the increased viscosity of the folders in temperatures evaluated. The increasing the temperature of the tests led to a reduction in the performance of anti-segregation. At concentrations of 5.20 kgf/m3 (0,040 gallft3) and 5.82 Kgf/m3 (0,045 gal/ft 3) observed a better performance of the properties evaluated in the proposed system. At low temperature was observed instability in the readings of rheology for all concentrations of anti-segregation. Contents that increasing the concentration of anti¬-segregation is limited concentrations greater than 0.55 % BWOC of the CMC in temperature analyzed. The use of the system with CMC promoted a good performance against the properties evaluated. The principal function of anti¬-segregation was optimized with increasing concentration of superplasticizer, at temperatures above the 2rC. The study of the behaviour of systemic additives, resulting in slurries of cement, which can be optimized face studies of other intrinsic properties in oil fields

Estudo do potencial de diferenciação de células-tronco mesenquimais equinas oriundas do sangue da medula óssea cultivadas sobre um filme multicamadas de biopolímeros: quitosna, HA e CMC

Pós-graduação em Biologia Geral e Aplicada - IBB

CMC among multilingual students of English for academic purposes: linguistic and sociolinguistic communicative factors in online written responses

The present study examines linguistic and sociolinguistic factors in a Web-enhanced