Entre Syrie et Mésopotamie : vases zoomorphes du Règne de Mittani

Abstract: The Mittanian zoomorphic vessels from Nuzi, Tell Brak, Tell al-Rimah and other sites allow the creation of a significant database for analysis based on typological criteria as well as spatial distribution. This class of materials is attested in several areas of the ancient Near East from the Late Calcholitic and still produced until the Mittanian age and thereafter. Most of the finds come from temples or domestic contexts and they can be now securely dated, while their spatial distribution can be properly investigated. Lion representations seem to predominate, but pigs and other animals appear as well. The exact function and meaning of these vessels are difficult to ascertain, nevertheless, in most cases, they are probably related to cultic practices performed throughout the Mittanian Empire.

Memórias ancestrais, traços contemporâneos e aspectos comunais na arte cerâmica Mbyá-Guarani

A análise acadêmica ora apresentada reflete a pesquisa vivencial que, como investigador do Programa de Pós-Graduação em Artes da Universidade do Estado do Rio de Janeiro (em sua linha de estudos em Arte, Cultura e Cognição), aferi em aldeias Mbyá-Guarani nas cidades de Niterói e Maricá desde o ano de 2012 a respeito de sua arte em barro. Com aportes etnohistóricos da sua cerâmica ancestral, esta ação foi assim realizada por levantamento de dados tanto pré-históricos quanto históricos focados sobre si. Porém, reconhecendo a escassez de seu fabrico entre aqueles Mbyá e, paradoxalmente, que ainda existam em seu meio mostras de que os artefatos de barro permanecem memorialmente sendo importantes para esse povo, tal exame não se restringiu a conhecer apenas a morfologia desses objetos, mas procurou vislumbrar um tanto de sua simbologia e recuperar essa ocorrência prática por meio de atividades artístico-pedagógicas junto às crianças dali. Portanto, através da pesquisa-ação e do método educativo de Célestin Freinet se buscou apontar oportunidades de revitalização dentro da sociedade Mbyá dessa memória do exercício de construção oleiro e de seu devido valor às suas crianças

Estudios de innovación y mejoramiento tecnológico para procesos productivos : cadena productiva de la cerámica, Huila.

60 hojas : ilustraciones.

Selección del país objetivo para un plan de internacionalización de teja de arcilla desde Colombia 2013

A partir del conocimiento que se posee referente al desarrollo de las ladrilleras del sector de Nemocón y las herramientas y disciplinas aplicables al estudio de un plan de internacionalización, se determina desarrollar el siguiente proceso. En primer lugar, a partir de la necesidad de diagnosticar un análisis del sector ladrillero en Nemocón Cundinamarca, se hace indispensable utilizar herramientas de la línea de estrategia. Se requiere de un estudio matricial del comportamiento del sector con su respectivo análisis y para generar un mayor soporte técnico al análisis del sector, se requiere de un estudio de planeación estratégica por escenarios el cual proveerá a la investigación de diversas alternativas en la selección de variables fundamentales del sistema. Acerca del estudio de los mercados tanto nacional como internacional, se dispondrá de las habilidades básicas de la línea de mercadeo. Es importante que a partir del análisis del sector y de la obtención de algunas variables importantes, se indague a profundidad acerca de las variables más importantes para el desarrollo de una matriz de mercados. La idea de la aplicación de esta matriz, es generar unos filtros de países seleccionados a partir de variables anteriormente especificadas con el fin de determinar un único mercado que será el objetivo para el plan de internacionalización. Sobre el país seleccionado se aplica un estudio de mercado y un estudio de viabilidad financiera bajo los cuales se obtienen las conclusiones del plan de internacionalización, su viabilidad y sus recomendaciones.

Effect of pH on the production of dispersed Bi4Ge3O12 nanoparticles by combustion synthesis

This paper reports the production of bismuth germanate ceramic scintillator (Bi4Ge3O12) by combustion synthesis (SHS) method, focusing on the influence of the synthesis parameters on the crystalline phases and agglomeration of the nanoparticles. The synthesis and sintering conditions were investigated through thermal analysis, X-ray diffraction as function of temperature, dilatometry and scanning electron microscopy. Well-dispersed Bi4Ge3O12 powder was accomplished by the combustion of the initial solution at pH 9, followed by low temperature calcination and milling. Sintered ceramics presented relative density of 98% and single crystalline Bi4Ge3O12 phase. The luminescent properties of the ceramics were investigated by photo- and radio- luminescence measurements and reproduced the typical Bi4Ge3O12 single-crystal spectra when excited with UV, beta and X-rays. The sintered ceramics presented light output of 4.4 x 10(3) photons/McV. (c) 2008 Published by Elsevier Ltd.

Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilos

Dutra, R. P. S.; Varela,M. L.; Nascimento, R. M. ; Gomes, U. U. ; Martinelli1, A. E. ; Paskocimas, C. A. Estudo comparativo da queima rápida com a queima tradicional nas propriedades de materiais cerâmicos de base argilosa. Cerâmica [online]. 2009, vol.55, n.333, pp. 100-105. ISSN 0366-6913. doi:Disponivem em: . Acesso em: 04 out. 2010.

Anelastic characterization and superconducting properties of RuSr2GdCu2O8+delta

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of TiO2 and AI(2)O(3) on the electrical and microstructural properties of SnO2 ceramics obtained by the Pechini method

Tin oxide has wakened up great scientific and technological interest for its potential use in varistors production and as gas sensor. In order to improve the microstructural and electrical properties in SnO2 varistor ceramics, the influence of differents dopants used, like TiO2 and Al2O3, is under research. The effect of TiO2 and Al2O3 on the properties of Sn-Co-Nb varistor systems obtained by the Pechini method has been investigated in this work. Characterization of synthesized raw material was performed by X-Ray Diffraction (XRD) and Scanning Electronic Microscopy (SEM). The microstructural and electrical characterization of sintered samples show that the TiO2 favors the grain growth and the Al2O3 contributes to the decrease it, effect that is manifested in the Sn-Co-Nb varistor systems. Breakdown field increase up to 6300V/cm with increasing Al2O3 content and non-linear coefficients with alpha=22 were obtained.

Influencia del tratamiento térmico en la cristalización y rugosidad de películas delgadas de LiNbO3 depositadas por el método Spin Coating

Lithium niobate (LiNbO3) thin films with 1/1 stoichiometry were prepared by a spin-coating from polymeric precursor method. The films deposited on silicon (100) substrates, were thermally treated from 400° to 600°C for 3 hours in order to study the influence of thermal treatment on the crystallinity, microstructure, grain size and roughness. X-ray diffraction (XRD) results showed that LiNbO3 phase crystallizes at low temperature (400°C). It was observed by scanning electron microscopy (SEM) that it is possible to obtain dense thin films at temperatures around 500°C. The atomic force microscopy (AFM) results showed that the grain size and roughness are strongly influenced by the annealing temperature.

Microstructure of doped barium titanate prepared from polymeric precursors

Barium titanate is used extensively as a dielectric in ceramic capacitors, particularly due to its high dielectric constant and low dielectric loss characteristics. It can be made semiconducting by addition of certain dopants and by proper modification of grains and grain boundary properties obtaining very interesting characteristics for various applications. The synthesis method and sintering regime have a strong influence on properties of obtained barium titanate ceramics. Doped barium titanate was prepared with Nb+5 and Y+3 ions as donor dopants, and with Mn+2 ions as acceptor dopant by polymeric precursors method. By this procedure nanosized powders were obtained after calcination. Sintering was performed in the temperature range of 1290°C to 1380°C The microstructure of doped BaTiO3 was performed using scanning electron microscopy. The influence of dopants and sintering temperature on grain size was analysed.

Innovaciones en la gestión y calidad de los revestimientos refractarios en la Compañía Sideŕurgica Nacional (Brasil)

The work describes actions carried out in colaboration among the National Steel Company - (CSN)-Brazil and the Interdisciplinary Laboratory of Electrochemistry and Ceramic - LIEC of the Federal University of Sao Carlos Brazil (UFSCar-Brazil), in the area of I&D, for integral management and improvement of the quality and performance of the refractory linings in the sintering areas, blast furnace, hot air pipe lines transferency to the blast furnace, pig-iron ladles, running channels, blast furnaces hearths, torpedo car, etc., as well as, the economic impact generated by the installation of the adopted measures.

Estudio de PMN cerámico dopado con KNbO3 y LiNbO 3 sintetizado por Pechini

PMN belongs to a special class of materials named relaxor ferroelectrics. It has high volumetric efficiency due to its high dielectric constant, which makes it in a perfect material for application in multilayer capacitors. When prepared the columbite route its preparation has many advantages. In this work, the preparations of columbite and PMN were done by Pechini and Partial Oxalate methods, respectively. The effects of the KNbO3 and LiNbO3 dopants added in various concentrations. The idea is founded on the correlations that they have with BaTiO3 y PbTiO3, respectively. The whole process was supervised by TG/DTA, XRD, SEM and determination of the specific surface area of the powders. LiNbO3 carries out the pre-sinterization of the particles, observed by a reduction in the surface area. There are not particle grow, but occur its lengthening. However, for KNbO3 these particle growth, but the agglomerates are softer. The effect produced by the doping during the synthesis of the PMN powder is different from the one produced in the columbite precursor. Pure precursor shows an average particle size of 0,2μm, but the addition of 5,0mol% of dopants carries out the formation of agglomerates close to 4μm. LiNbO 3 addition carries out spherical particles and pre-sinterization, while KNbO3 addition does not change the particles shape.

Estudio de la adición de K+ y LiNbO3 en las propiedades finales del relaxor PMN procesado por mezcla de polvos

PMN ceramic relaxor has been investigated by several researchers and many aspects of this material, like powder morphology, phase decomposition, weight loss during sintering process, densification, between others, still are investigated. PMN powder preparation has been shown more efficient when synthesized by columbite route, however lead addition stage for the PMN powder synthesis remains problematical. Therefore, this work proposes a new association of methodologies, using columbite route and the hydroxide precipitation method. Through use of the powder mixture technique, which permitted to obtain good green and sintered densities, was possible to observe K+ y Li + dopants reduce weight loss in sintering process and change significantly the dielectric properties. Addition of LiNbO3 seeds in conformation stage, which react in a distinct way as a function of the particle size, promotes the formation of differenced grains in the ceramic bulk. Consequently, very different dielectrics properties from conventional PMN ceramic were obtained.