Caracterização química e física de vermicomposto e avaliação de sua capacidade em adsorver cobre e zinco

The physical and chemical characterization of vermicompost from bovine manure has been studied. It was examined the pH and cation exchangeable capacity (CEC), organic matter content, electric conductivity and elementary and XRD analyses, among other characteristics. The vermicompost was then applied to the retention and competition of metal micronutrients and pollutants (Cu and Zn) from metal nitrate solutions. The retention was affected by both the pH and adsorption time, while the competitive character of these metals for the substrate was relevant to each pH examined.

Adsorção de íons Cu2+ em latossolo vermelho-amarelo húmico

In environmental studies it is necessary to know the adsorption behavior of metals by soils, since the unfavorable effects of heavy metals and even the micronutrients at high concentrations in the environment are related to these adsorbents' ability to immobilize them. A sample of a humic yellow red oxisol from Araponga region in the State of Minas Gerais, Brazil, was used to verify the adsorption behavior of Cu2+ ions in this substrate. The mathematical model described by Langmuir's adsorption equation in its linearized form was applied and the values of the maximum capacity b and those of the constant related to the bonding energy a were obtained. Aliquots of copper nitrate solutions containing several concentrations of this metal were added to soil samples, the pH being predetermined for developing the adsorption experiments. The chemical and physical characterization of soil sample were performed by determining the organic carbon, nitrogen and phosphorus concentrations, cation exchange capacity (CEC), pH, concentration of metals (Al, Fe, K, Mg, Ca, Zn, Cu, Ni, Cr, Co, Pb, and Cd), granulometric analysis and X-ray diffraction. Langmuir isotherms presented two distinct adsorption regions at both pH 4 and pH 5, showing that the adsorptive phenomenon occurs in two distinct stages. The adsorption sites for the lower part presented greater bonding energy and low adsorption capacity compared with the adsorption sites of the part of the curve corresponding to higher Cu concentrations in the equilibrating solution.

Morfologia e cristalinidade de hidroxicarbonato de zinco obtido via precipitação homogênea: influência dos ânions cloreto e nitrato

The effects of chloride and nitrate anions and their respective concentrations, as well as urea presence, on solid phase morphologies were investigated. Zinc hydroxide carbonate was prepared by aging diluted zinc salt solution in presence of urea at 90ºC. Samples were identified by X-ray powder diffractograms showing the characteristic patterns of hydrozincite. The crystallinity was correlated with the concentrations of reagents. Spherulitic-type aggregates and single acicular particles were obtained from diluted chloride and nitrate solutions while porous aggregates of uniform size were formed from solutions with high chloride and urea concentrations.

Caracterização química e física de turfa litorânea e avaliação da adsorção competitiva por cobre e zinco

The chemical and physical characterization of coastal peat has been studied. It was examined the pH, organic matter content and elementary and XRD analyses, among other characteristics. The peat was then applied to the retention and competition of metal micronutrients (Cu and Zn) from metal nitrate solutions. The retention was affected by both the pH and time of adsorption, while the competitive character of these metals for the substrate was relevant to each pH examined.

Processamento de pilhas do tipo botão

This work presents hydrometallurgical routes for recovering valuable elements from spent button cells, based on leaching of internal components with sulfuric acid (Li/MnO2 and Zn-air) or nitric acid (Ag-Zn), at 90 ºC for 2h. Slow evaporation of the leachate crystallized MnSO4.H2O, whereas lithium was partially recovered as LiF. Mercury present in Zn-air and Ag-Zn samples was precipitated as HgS. Silver was recovered as AgCl before mercury precipitation. Zinc and iron were precipitated as hydroxides. The amount of iron varied according to the intensity of the corrosion of the external cell case. Final wastes are neutral and colorless sodium sulfate/nitrate solutions.

Reliability of a method for evaluating porosity in denture base resins

Background: The method of porosity analysis by water absorption has been carried out by the storage of the specimens in pure water, but it does not exclude the potential plasticising effect of the water generating unreal values of porosity. Objective: The present study evaluated the reliability of this method of porosity analysis in polymethylmethacrylate denture base resins by the determination of the most satisfactory solution for storage (S), where the plasticising effect was excluded. Materials and methods: Two specimen shapes (rectangular and maxillary denture base) and two denture base resins, water bath-polymerised (Classico) and microwave-polymerised (Acron MC) were used. Saturated anhydrous calcium chloride solutions (25%, 50%, 75%) and distilled water were used for specimen storage. Sorption isotherms were used to determine S. Porosity factor (PF) and diffusion coefficient (D) were calculated within S and for the groups stored in distilled water. anova and Tukey tests were performed to identify significant differences in PF results and Kruskal-Wallis test and Dunn multiple comparison post hoc test, for D results (alpha = 0.05). Results: For Acron MC denture base shape, FP results were 0.24% (S 50%) and 1.37% (distilled water); for rectangular shape FP was 0.35% (S 75%) and 0.19% (distilled water). For Classico denture base shape, FP results were 0.54% (S 75%) and 1.21% (distilled water); for rectangular shape FP was 0.7% (S 50%) and 1.32% (distilled water). FP results were similar in S and distilled water only for Acron MC rectangular shape (p > 0.05). D results in distilled water were statistically higher than S for all groups. Conclusions: The results of the study suggest that an adequate solution for storing specimens must be used to measure porosity by water absorption, based on excluding the plasticising effect.

X-ray and gamma irradiation effects on dipole defects in CaF2 : La, Yb, Al

Impurity-interstitial dipoles in calcium fluoride solutions with Al3+, Yb3+ and La3+ fluorides were studied using the thermally stimulated depolarization current (TSDC) technique. The dipolar complexes are formed by substitutional trivalent ions in Ca2+ sites and interstitial fluorine in nearest neighbor sites. The relaxations observed at 150 K are assigned to dipoles nnR(S)(3+)- F-i(-) (R-S = La or Yb). The purpose of this work is to study the processes of energy storage in the fluorides following X-ray and gamma irradiation. Computer modelling techniques are used to obtain the formation energy of dipole defects. (C) 2007 Elsevier Ltd. All rights reserved.

Acceleration of the decomposition of Sicilian lemon leaves as an auxiliary measure in the control of citrus black spot

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Absorção e redistribuição de nitrogênio (15N) em Citrus mitis Bl

Com a avaliação da eficiência de uso do nitrogênio, tem-se melhor entendimento dos aspectos nutricionais e respostas à adubação. O presente ensaio teve por objetivo estudar a absorção e redistribuição de nitrogênio (15N) em Citrus mitis Bl.. As fontes de fertilizante utilizadas foram: sulfato de amônio, uréia, nitrato de cálcio e nitrato de potássio. O delineamento experimental utilizado foi inteiramente casualizado, com 4 tratamentos e 3 repetições. Foram realizadas duas amostragens, aos 10 e 20 dias após a aplicação do adubo marcado, a fim de determinar os teores de N nas diferentes partes da planta. Através dos resultados, verificou-se que não houve efeito dos tratamentos sobre o peso de matéria seca e conteúdo de N nas plantas. A eficiência de absorção de N variou com a natureza do fertilizante nitrogenado e com a época de amostragem, ao passo que a redistribuição do N não foi afetada. A eficiência máxima de absorção do N variou de 14% (uréia) e 31% (sulfato de amônio), respectivamente, aos 10 e 20 dias após a aplicação do 15N.

Effect of thermal cycling on microleakage between hard chairside relines and denture base acrylic resins

Objectives:Microleakage is a pre-stage of debonding between hard chairside relines and denture base acrylic resins. Therefore, it is important to assess them with regard to the longevity of the relined denture. This study investigated the effect of thermal cycling on the microleakage at the interface of three hard chairside reline resins and three denture base resins.Material and methods:Rectangular bars (12 mm x 3 mm x 3 mm) of Lucitone 550, Acron MC and QC 20 were made and relined with Kooliner, Tokuyama Rebase Fast II and Ufi Gel Hard, Lucitone 550, Acron MC and QC 20 resins. Specimens were divided into one control and two test groups (n = 10). In specimens of the control group, the microleakage was performed after the reline procedure. In Test Group 1, the specimens were stored for 24 h in distilled water at room temperature and in Test Group 2; the specimens were thermal cycled from 5 to 55 degrees C for 5000 cycles with a 30-s dwell time. Subsequently, all specimens were immersed in 50% silver nitrate solutions for 24 h. All specimens were sectioned longitudinally into three fractions and the lateral sections were examined (n = 20). Silver nitrate stain penetration was examined under a stereoscopic lens with x30 magnification, and the images were captured. Leica Qwin image analysis software was used to determine microleakage at the interface of the materials. Data were analysed using the Kruskal-Wallis test at a 95% level of significance.Results:For all cycles, there were no statistically significant differences between thermal cycled and non-thermal cycled groups (p > 0.05).Conclusion:It can be concluded that thermal cycling had no effect on the microleakage.

Reliability of a method for evaluating porosity in denture base resins

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Síntese de hidroxiapatita pelo método sol-gel utilizando precursores alternativos: nitrato de cálcio e ácido fosfórico

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nanocomposites materials generated from a spray

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Morfologia e cristalinidade de hidroxicarbonato de zinco obtido via precipitação homogênea: influência dos ânions cloreto e nitrato

The effects of chloride and nitrate anions and their respective concentrations, as well as urea presence, on solid phase morphologies were investigated. Zinc hydroxide carbonate was prepared by aging diluted zinc salt solution in presence of urea at 90ºC. Samples were identified by X-ray powder diffractograms showing the characteristic patterns of hydrozincite. The crystallinity was correlated with the concentrations of reagents. Spherulitic-type aggregates and single acicular particles were obtained from diluted chloride and nitrate solutions while porous aggregates of uniform size were formed from solutions with high chloride and urea concentrations.

Produção e qualidade fisiológica de sementes de feijão-vagem em função de fontes e doses de nitrogênio

Estudaram-se os efeitos da aplicação de cinco doses e três fontes de nitrogênio sobre a produção e a qualidade fisiológica de sementes de feijão-vagem, cv. Macarrão Trepador - Hortivale, no período de setembro/2000 a fevereiro/2001, no Centro de Ciências Agrárias da Universidade Federal da Paraíba, em Areia. O delineamento experimental utilizado foi em blocos casualizados, com os tratamentos distribuídos em esquema fatorial (3 x 5) + 1, correspondendo às fontes (nitrato de cálcio, sulfato de amônio e uréia) e doses (0, 25, 50, 75 e 100kg.ha-1) de nitrogênio, e um tratamento adicional sem adubação (testemunha), com quatro repetições. As fontes nitrato de cálcio e sulfato de amônio, na dose de 100kg.ha-1, e uréia, na dose de 55kg.ha-1 de N, proporcionaram as produções de sementes no feijão-vagem de 2.571, 3.219 e 2.221kg.ha-1, respectivamente. O nitrogênio, em todas as fontes, influenciou positivamente a germinação e o vigor (índice de velocidade de germinação e emergência em campo) da semente do feijão-vagem. As doses de 68,8 e 49kg.ha-1 de N, fontes nitrato de cálcio e uréia foram responsáveis pelos valores máximos para a porcentagem de germinação, 72 e 75%, respectivamente. Para a fonte sulfato de amônio ocorreu aumento linear da porcentagem de germinação, à medida que se elevaram as doses de nitrogênio, sendo que na dose de 100kg.ha-1 obteve-se um porcentual de 84%. O índice de velocidade de germinação apresentou valores mais elevados, 6,0; 7,7 e 6,9 nas doses de 49; 71 e 53kg.ha-1 de N, fontes nitrato de cálcio, uréia e sulfato de amônio, respectivamente. A emergência em campo aumentou linearmente com elevação das doses de N (fonte nitrato de cálcio), sendo a emergência máxima (70%) obtida na dose de 100 kg ha-1 de N em cada fonte. O sulfato de amônio deve ser recomendado como fonte de N, em programas de produção de sementes de feijão-vagem.