Power transformations in correspondence analysis

Power transformations of positive data tables, prior to applying the correspondence analysis algorithm, are shown to open up a family of methods with direct connections to the analysis of log-ratios. Two variations of this idea are illustrated. The first approach is simply to power the original data and perform a correspondence analysis this method is shown to converge to unweighted log-ratio analysis as the power parameter tends to zero. The second approach is to apply the power transformation to thecontingency ratios, that is the values in the table relative to expected values based on the marginals this method converges to weighted log-ratio analysis, or the spectral map. Two applications are described: first, a matrix of population genetic data which is inherently two-dimensional, and second, a larger cross-tabulation with higher dimensionality, from a linguistic analysis of several books.

Lithography-free micro- and nanostructuring based on conventional plasma etching

In now-a-days semiconductor and MEMS technologies the photolithography is the working horse for fabrication of functional devices. The conventional way (so called Top-Down approach) of microstructuring starts with photolithography, followed by patterning the structures using etching, especially dry etching. The requirements for smaller and hence faster devices lead to decrease of the feature size to the range of several nanometers. However, the production of devices in this scale range needs photolithography equipment, which must overcome the diffraction limit. Therefore, new photolithography techniques have been recently developed, but they are rather expensive and restricted to plane surfaces. Recently a new route has been presented - so-called Bottom-Up approach - where from a single atom or a molecule it is possible to obtain functional devices. This creates new field - Nanotechnology - where one speaks about structures with dimensions 1 - 100 nm, and which has the possibility to replace the conventional photolithography concerning its integral part - the self-assembly. However, this technique requires additional and special equipment and therefore is not yet widely applicable. This work presents a general scheme for the fabrication of silicon and silicon dioxide structures with lateral dimensions of less than 100 nm that avoids high-resolution photolithography processes. For the self-aligned formation of extremely small openings in silicon dioxide layers at in depth sharpened surface structures, the angle dependent etching rate distribution of silicon dioxide against plasma etching with a fluorocarbon gas (CHF3) was exploited. Subsequent anisotropic plasma etching of the silicon substrate material through the perforated silicon dioxide masking layer results in high aspect ratio trenches of approximately the same lateral dimensions. The latter can be reduced and precisely adjusted between 0 and 200 nm by thermal oxidation of the silicon structures owing to the volume expansion of silicon during the oxidation. On the basis of this a technology for the fabrication of SNOM calibration standards is presented. Additionally so-formed trenches were used as a template for CVD deposition of diamond resulting in high aspect ratio diamond knife. A lithography-free method for production of periodic and nonperiodic surface structures using the angular dependence of the etching rate is also presented. It combines the self-assembly of masking particles with the conventional plasma etching techniques known from microelectromechanical system technology. The method is generally applicable to bulk as well as layered materials. In this work, layers of glass spheres of different diameters were assembled on the sample surface forming a mask against plasma etching. Silicon surface structures with periodicity of 500 nm and feature dimensions of 20 nm were produced in this way. Thermal oxidation of the so structured silicon substrate offers the capability to vary the fill factor of the periodic structure owing to the volume expansion during oxidation but also to define silicon dioxide surface structures by selective plasma etching. Similar structures can be simply obtained by structuring silicon dioxide layers on silicon. The method offers a simple route for bridging the Nano- and Microtechnology and moreover, an uncomplicated way for photonic crystal fabrication.

GENOTYPE CHARACTERIZATION OF THE Haematobia irritans (DIPTERA: MUSCIDAE) FROM BRAZIL, DOMINICAN REPUBLIC AND COLOMBIA BASED ON RANDOMLY AMPLIFIED POLYMORPHIC DNA (RAPD) ANALYSIS

Blood-sucking flies are important parasites in animal production systems, especially regarding confinement conditions. Haematobia irritans, the horn fly, is one of the most troublesome species within bovine production systems, due to the intense stress imposed to the animals. H. irritans is one of the parasites of cattle that cause significant economic losses in many parts of the world, including South America. In the present work, Brazilian, Colombian and Dominican Republic populations of this species were studied by Random Amplified Polymorphic DNA(RAPD) to assess basically genetic variability between populations. Fifteen different decamer random primers were employed in the genomic DNA amplification, yielding 196 fragments in the three H. irritans populations. Among h. irritans samples, that from Colombia produced the smallest numbers of polymorphic hands. This high genetic homogeneity may be ascribed to its geographic origin, which causes high isolation, low gene flow, unlike the other American populations, from Brazil and Dominican Republic. Molecular marker fragments, which its produced exclusive bands, detected in every sample enabled the population origin to be characterized, but they are also potentially useful for further approaches such as the putative origin of Brazilian, Colombian and Dominican Republic populations of horn fly from South America. Similarity indices produced by chemo metric analysis showed the closest relationships between flies from Brazil and Dominican Republic, while flies from Colombia showed the greatest genotypic differentiation relative to the others populations.

Agricultural transformation and Gender considerations in Caribbean Economics

The aim of this paper is to provide an overview of the gender and social disparities existing in the agricultural and rural sector in Caribbean economies. In this context, agricultural transformation as occasioned by the dismantling of preferential trading arrangements is analysed to identify the most relevant gender discriminatory measures in the current agricultural development policy and programmes. The analysis seeks to provide the basis for enhancing understanding among policy makers, planners and rural development practitioners of the gender and social dimension involved in the formulation of agricultural policy and more specifically in relation to the new policy and institutional arrangements for agriculture in the region. The paper also provides insights regarding what changes should take place to create an enabling environment for more gender-based approaches to policy-making and strategic planning in agricultural development and trade in the Caribbean. The methodology centred on the review of secondary sources that provide references on the new challenges, opportunities and constraints faced by the agricultural sector, in particular small farmers, in the context of globalization and agriculture transformation. Much of the literature for this assignment was obtained from FAO Headquarters in Rome and the FAO Subregional Office in Barbados, as well as the OECS Secretariat in St. Lucia. In the process of the review exercise, due consideration was given to changes in agricultural production patterns, resources allocation and rural livelihoods. Efforts to examine the most relevant policy measures and mechanisms in-place in support to agricultural development in the region were constrained, in the main, by the absence of gender disaggregated data. Documentation as regards the situation of women and men in relation to agricultural labour, rural income and food security situation in regions were limited. The use of the internet served to bridge the communication gap between countries and institutions. The preliminary draft of the paper was presented and discussed at the FAO/ECLAC/UNIFEM regional workshop on mainstreaming gender analysis in agriculture and trade policies, for Caribbean countries, in November 2003. The second draft of the paper was informed by comments from the workshop and additional information acquired through field visits to Barbados, St. Kitts and St. Vincent in March 2004. The three day visits to each of these three countries entailed a review/appreciation of the resource, constraints and institutional capacities for gender mainstreaming within the agricultural sector at the national level. This included visits to some of the major agricultural projects and interviews with farmers (where feasible) in respect of their perspective of the current situation of the agricultural sector and the viability of their farm enterprises. As well, meetings were held with relevant/available officials within the respective ministries of agriculture to discern the gender consideration as regards agricultural policy and planning at the country level. The internet was invaluable to the task of sourcing supplementary information to satisfy the aim of the paper; in respect of the identification of concrete policy measures and actions to formulate and develop more gender/social-responsive agricultural development policies. The final revision, though thwart with resource and communication constraints, was ultimately completed in compliance with the structure and approach proposed in the terms of references for this FAO/ECLAC assignment.

Type-II super-Backlund transformation and integrable defects for the N=1 super sinh-Gordon model

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diagnosis and Fault detection in Electrical Machines and Drives based on Advanced Signal Processing Techniques

In the present thesis, a new methodology of diagnosis based on advanced use of time-frequency technique analysis is presented. More precisely, a new fault index that allows tracking individual fault components in a single frequency band is defined. More in detail, a frequency sliding is applied to the signals being analyzed (currents, voltages, vibration signals), so that each single fault frequency component is shifted into a prefixed single frequency band. Then, the discrete Wavelet Transform is applied to the resulting signal to extract the fault signature in the frequency band that has been chosen. Once the state of the machine has been qualitatively diagnosed, a quantitative evaluation of the fault degree is necessary. For this purpose, a fault index based on the energy calculation of approximation and/or detail signals resulting from wavelet decomposition has been introduced to quantify the fault extend. The main advantages of the developed new method over existing Diagnosis techniques are the following: - Capability of monitoring the fault evolution continuously over time under any transient operating condition; - Speed/slip measurement or estimation is not required; - Higher accuracy in filtering frequency components around the fundamental in case of rotor faults; - Reduction in the likelihood of false indications by avoiding confusion with other fault harmonics (the contribution of the most relevant fault frequency components under speed-varying conditions are clamped in a single frequency band); - Low memory requirement due to low sampling frequency; - Reduction in the latency of time processing (no requirement of repeated sampling operation).

A comparison of pixel and object-based land cover classification. A case study of the Asmara region, Eritrea

In this paper we compare the performance of two image classification paradigms (object- and pixel-based) for creating a land cover map of Asmara, the capital of Eritrea and its surrounding areas using a Landsat ETM+ imagery acquired in January 2000. The image classification methods used were maximum likelihood for the pixel-based approach and Bhattacharyya distance for the object-oriented approach available in, respectively, ArcGIS and SPRING software packages. Advantages and limitations of both approaches are presented and discussed. Classifications outputs were assessed using overall accuracy and Kappa indices. Pixel- and object-based classification methods result in an overall accuracy of 78% and 85%, respectively. The Kappa coefficient for pixel- and object-based approaches was 0.74 and 0.82, respectively. Although pixel-based approach is the most commonly used method, assessment and visual interpretation of the results clearly reveal that the object-oriented approach has advantages for this specific case-study.

Achieving a more realistic assessment of rockfall hazards by coupling three-dimensional process models and field-based tree-ring data

Sound knowledge of the spatial and temporal patterns of rockfalls is fundamental for the management of this very common hazard in mountain environments. Process-based, three-dimensional simulation models are nowadays capable of reproducing the spatial distribution of rockfall occurrences with reasonable accuracy through the simulation of numerous individual trajectories on highly-resolved digital terrain models. At the same time, however, simulation models typically fail to quantify the ‘real’ frequency of rockfalls (in terms of return intervals). The analysis of impact scars on trees, in contrast, yields real rockfall frequencies, but trees may not be present at the location of interest and rare trajectories may not necessarily be captured due to the limited age of forest stands. In this article, we demonstrate that the coupling of modeling with tree-ring techniques may overcome the limitations inherent to both approaches. Based on the analysis of 64 cells (40 m × 40 m) of a rockfall slope located above a 1631-m long road section in the Swiss Alps, we illustrate results from 488 rockfalls detected in 1260 trees. We illustrate that tree impact data cannot only be used (i) to reconstruct the real frequency of rockfalls for individual cells, but that they also serve (ii) the calibration of the rockfall model Rockyfor3D, as well as (iii) the transformation of simulated trajectories into real frequencies. Calibrated simulation results are in good agreement with real rockfall frequencies and exhibit significant differences in rockfall activity between the cells (zones) along the road section. Real frequencies, expressed as rock passages per meter road section, also enable quantification and direct comparison of the hazard potential between the zones. The contribution provides an approach for hazard zoning procedures that complements traditional methods with a quantification of rockfall frequencies in terms of return intervals through a systematic inclusion of impact records in trees.

Restoration of micro data of John Lossing Buck's survey and analysis of the inverse relationship between yield and farm size in rural China in the 1930's

A large scale Chinese agricultural survey was conducted at the direction of John Lossing Buck from 1929 through 1933. At the end of the 1990’s, some parts of the original micro data of Buck’s survey were discovered at Nanjing Agricultural University. An international joint study was begun to restore micro data of Buck’s survey and construct parts of the micro database on both the crop yield survey and special expenditure survey. This paper includes a summary of the characteristics of farmlands and cropping patterns in crop yield micro data that covered 2,102 farmers in 20 counties of 9 provinces. In order to test the classical hypothesis of whether or not an inverse relationship between land productivity and cultivated area may be observed in developing countries, a Box-Cox transformation test was conducted for functional forms on five main crops of Buck’s crop yield survey. The result of the test shows that the relationship between land productivity and cultivated areas of wheat and barley is linear and somewhat negative; those of rice, rapeseed, and seed cotton appear to be slightly positive. It can be tentatively concluded that the relationship between cultivated area and land productivity are not the same among crops, and the difference of labor intensity and the level of commercialization of each crop may be strongly related to the existence or non-existence of inverse relationships.

Efficient sampling from truncated bivariate Gaussians via Box-Muller transformation

Many practical simulation tasks demand procedures to draw samples efficiently from multivariate truncated Gaussian distributions. In this work, we introduce a novel rejection approach, based on the Box-Muller transformation, to generate samples from a truncated bivariate Gaussian density with an arbitrary support. Furthermore, for an important class of support regions the new method allows us to achieve exact sampling, thus becoming the most efficient approach possible. RESUMEN. Método específico para generar muestras de manera eficiente de Gaussianas bidimensionales truncadas con cualquier zona de truncamiento basado en la transformación de Box-Muller.

Societal transformation and climate change adaptation : PAR experiences in Portugal

Tese de doutoramento, Alterações Climáticas e Políticas de Desenvolvimento Sustentável (Sociologia), Universidade de Lisboa, Instituto de Ciências Sociais, 2016

Productivity change using growth accounting and frontier-based approaches:evidence from a Monte Carlo analysis

This study presents some quantitative evidence from a number of simulation experiments on the accuracy of the productivitygrowth estimates derived from growthaccounting (GA) and frontier-based methods (namely data envelopment analysis-, corrected ordinary least squares-, and stochastic frontier analysis-based malmquist indices) under various conditions. These include the presence of technical inefficiency, measurement error, misspecification of the production function (for the GA and parametric approaches) and increased input and price volatility from one period to the next. The study finds that the frontier-based methods usually outperform GA, but the overall performance varies by experiment. Parametric approaches generally perform best when there is no functional form misspecification, but their accuracy greatly diminishes otherwise. The results also show that the deterministic approaches perform adequately even under conditions of (modest) measurement error and when measurement error becomes larger, the accuracy of all approaches (including stochastic approaches) deteriorates rapidly, to the point that their estimates could be considered unreliable for policy purposes.