Load Profile Analysis Tool for Electrical Appliances in Households

This paper presents a methodology to forecast the hourly and daily consumption in households. The methodology was validated for households in Lisbon region, Portugal. The paper shows that the forecast tool allows obtaining satisfactory results for forecasting. Models of demand response allow the support of consumer’s decision in exchange for an economic benefit by the redefinition of load profile or changing the appliance consumption period. It is also in the interest of electric utilities to take advantage of these changes, particularly when consumers have an action on the demand-side management or production. Producers need to understand the load profile of households that are connected to a smart grid, to promote a better use of energy, as well as optimize the use of micro-generation from renewable sources, not only to delivering to the network but also in self-consumption.

Load Profile Analysis Tool for Electrical Appliances in Households Assisted by CPS

This paper presents a methodology to forecast the hourly and daily consumption in households assisted by cyber physical systems. The methodology was validated using a database of consumption of a set of 93 domestic consumers. Forecast tools used were based on Fast Fourier Series and Generalized Reduced Gradient. Both tools were tested and their forecast results were compared. The paper shows that both tools allow obtaining satisfactory results for energy consumption forecasting.

Proposal on How To Conduct a Biopharmaceutical Process Failure Mode and Effect Analysis (FMEA) as a Risk Assessment Tool

With the publication of the quality guideline ICH Q9 "Quality Risk Management" by the International Conference on Harmonization, risk management has already become a standard requirement during the life cycle of a pharmaceutical product. Failure mode and effect analysis (FMEA) is a powerful risk analysis tool that has been used for decades in mechanical and electrical industries. However, the adaptation of the FMEA methodology to biopharmaceutical processes brings about some difficulties. The proposal presented here is intended to serve as a brief but nevertheless comprehensive and detailed guideline on how to conduct a biopharmaceutical process FMEA. It includes a detailed 1-to-10-scale FMEA rating table for occurrence, severity, and detectability of failures that has been especially designed for typical biopharmaceutical processes. The application for such a biopharmaceutical process FMEA is widespread. It can be useful whenever a biopharmaceutical manufacturing process is developed or scaled-up, or when it is transferred to a different manufacturing site. It may also be conducted during substantial optimization of an existing process or the development of a second-generation process. According to their resulting risk ratings, process parameters can be ranked for importance and important variables for process development, characterization, or validation can be identified. LAY ABSTRACT: Health authorities around the world ask pharmaceutical companies to manage risk during development and manufacturing of pharmaceuticals. The so-called failure mode and effect analysis (FMEA) is an established risk analysis tool that has been used for decades in mechanical and electrical industries. However, the adaptation of the FMEA methodology to pharmaceutical processes that use modern biotechnology (biopharmaceutical processes) brings about some difficulties, because those biopharmaceutical processes differ from processes in mechanical and electrical industries. The proposal presented here explains how a biopharmaceutical process FMEA can be conducted. It includes a detailed 1-to-10-scale FMEA rating table for occurrence, severity, and detectability of failures that has been especially designed for typical biopharmaceutical processes. With the help of this guideline, different details of the manufacturing process can be ranked according to their potential risks, and this can help pharmaceutical companies to identify aspects with high potential risks and to react accordingly to improve the safety of medicines.

MediPlEx - a tool to combine in silico & experimental gene expression profiles of the model legume Medicago truncatula

Background: Expressed Sequence Tags (ESTs) are in general used to gain a first insight into gene activities from a species of interest. Subsequently, and typically based on a combination of EST and genome sequences, microarray-based expression analyses are performed for a variety of conditions. In some cases, a multitude of EST and microarray experiments are conducted for one species, covering different tissues, cell states, and cell types. Under these circumstances, the challenge arises to combine results derived from the different expression profiling strategies, with the goal to uncover novel information on the basis of the integrated datasets. Findings: Using our new analysis tool, MediPlEx (MEDIcago truncatula multiPLe EXpression analysis), expression data from EST experiments, oligonucleotide microarrays and Affymetrix GeneChips® can be combined and analyzed, leading to a novel approach to integrated transcriptome analysis. We have validated our tool via the identification of a set of well-characterized AM-specific and AM-induced marker genes, identified by MediPlEx on the basis of in silico and experimental gene expression profiles from roots colonized with AM fungi. Conclusions: MediPlEx offers an integrated analysis pipeline for different sets of expression data generated for the model legume Medicago truncatula. As expected, in silico and experimental gene expression data that cover the same biological condition correlate well. The collection of differentially expressed genes identified via MediPlEx provides a starting point for functional studies in plant mutants.

The reliability of video based time motion analysis

Time motion analysis is extensively used to assess the demands of team sports. At present there is only limited information on the reliability of measurements using this analysis tool. The aim of this study was to establish the reliability of an individual observer's time motion analysis of rugby union. Ten elite level rugby players were individually tracked in Southern Hemisphere Super 12 matches using a digital video camera. The video footage was subsequently analysed by a single researcher on two occasions one month apart. The test-retest reliability was quantified as the typical error of measurement (TEM) and rated as either good (10% TEM). The total time spent in the individual movements of walking, jogging, striding, sprinting, static exertion and being stationary had moderate to poor reliability (5.8-11.1% TEM). The frequency of individual movements had good to poor reliability (4.3-13.6% TEM), while the mean duration of individual movements had moderate reliability (7.1-9.3% TEM). For the individual observer in the present investigation, time motion analysis was shown to be moderately reliable as an evaluation tool for examining the movement patterns of players in competitive rugby. These reliability values should be considered when assessing the movement patterns of rugby players within competition.

Introducing numerical analysis tools in engineering: a Scilab user case in electronics course

Software tools in education became popular since the widespread of personal computers. Engineering courses lead the way in this development and these tools became almost a standard. Engineering graduates are familiar with numerical analysis tools but also with simulators (e.g. electronic circuits), computer assisted design tools and others, depending on the degree. One of the main problems with these tools is when and how to start use them so that they can be beneficial to students and not mere substitutes for potentially difficult calculations or design. In this paper a software tool to be used by first year students in electronics/electricity courses is presented. The growing acknowledgement and acceptance of open source software lead to the choice of an open source software tool – Scilab, which is a numerical analysis tool – to develop a toolbox. The toolbox was developed to be used as standalone or integrated in an e-learning platform. The e-learning platform used was Moodle. The first approach was to assess the mathematical skills necessary to solve all the problems related to electronics and electricity courses. Analysing the existing circuit simulators software tools, it is clear that even though they are very helpful by showing the end result they are not so effective in the process of the students studying and self learning since they show results but not intermediate steps which are crucial in problems that involve derivatives or integrals. Also, they are not very effective in obtaining graphical results that could be used to elaborate reports and for an overall better comprehension of the results. The developed tool was based on the numerical analysis software Scilab and is a toolbox that gives their users the opportunity to obtain the end results of a circuit analysis but also the expressions obtained when derivative and integrals calculations, plot signals, obtain vector diagrams, etc. The toolbox runs entirely in the Moodle web platform and provides the same results as the standalone application. The students can use the toolbox through the web platform (in computers where they don't have installation privileges) or in their personal computers by installing both the Scilab software and the toolbox. This approach was designed for first year students from all engineering degrees that have electronics/electricity courses in their curricula.

A novel tool to analyze MRI recurrence patterns in glioblastoma.

At least 10% of glioblastoma relapses occur at distant and even contralateral locations. This disseminated growth limits surgical intervention and contributes to neurological morbidity. Preclinical data pointed toward a role for temozolomide (TMZ) in reducing radiotherapy-induced glioma cell invasiveness. Our objective was to develop and validate a new analysis tool of MRI data to examine the clinical recurrence pattern of glioblastomas. MRIcro software was used to map the location and extent of initial preoperative and recurrent tumors on MRI of 63 patients in the European Organisation for Research and Treatment of Cancer (EORTC) 26981/22981/National Cancer Institute of Canada (NCIC) CE.3 study into the same stereotaxic space. This allowed us to examine changes of site and distance between the initial and the recurrent tumor on the group level. Thirty of the 63 patients were treated using radiotherapy, while the other patients completed a radiotherapy-plus-TMZ treatment. Baseline characteristics (median age, KPS) and outcome data (progression-free survival, overall survival) of the patients included in this analysis resemble those of the general study cohort. The patient groups did not differ in the promoter methylation status of methyl guanine methyltransferase (MGMT). Overall frequency of distant recurrences was 20%. Analysis of recurrence patterns revealed no difference between the groups in the size of the recurrent tumor or in the differential effect on the distance of the recurrences from the preoperative tumor location. The data show the feasibility of groupwise recurrence pattern analysis. An effect of TMZ treatment on the recurrence pattern in the EORTC 26981/22981/NCIC CE.3 study could not be demonstrated.

Comment faire de la surveillance sanitaire? L'exemple de l'Observatoire Valaisan de la Santé en Suisse [How to conduct public health surveillance? The example of the Observatoire Valaisan de la Santé in Switzerland].

OBJECTIVE: To describe the goals and methods of contemporary public health surveillance and to present the activities of the Observatoire Valaisan de la Santé (OVS), a tool unique in Switzerland to conduct health surveillance for the population of a canton. METHODS: Narrative review and presentation of the OVS. RESULTS: Public health surveillance consists of systematic and continuous collection, analysis, interpretation and dissemination of health data necessary for public health planning. Surveillance is organized according to contemporary public health issues. Switzerland is currently in an era dominated by chronic diseases due to ageing of the population. This "new public health" era is also characterized by the growing importance of health technology, rational risk management, preventive medicine and health promotion, and the central role of the citizen/patient. Information technologies provide access to new health data, but public health surveillance methods need to be adapted. In Switzerland, health surveillance activities are conducted by several public and private bodies, at federal and cantonal levels. The Valais canton has set up the OVS, an integrative, regional, and reactive system to conduct surveillance. CONCLUSION: Public health surveillance provides information useful for public health decisions and actions. It constitutes a key element for public health planning.

Tapping the innovation potential of corporate engagement with stakeholders

Summary This dissertation explores how stakeholder dialogue influences corporate processes, and speculates about the potential of this phenomenon - particularly with actors, like non-governmental organizations (NGOs) and other representatives of civil society, which have received growing attention against a backdrop of increasing globalisation and which have often been cast in an adversarial light by firms - as a source of teaming and a spark for innovation in the firm. The study is set within the context of the introduction of genetically-modified organisms (GMOs) in Europe. Its significance lies in the fact that scientific developments and new technologies are being generated at an unprecedented rate in an era where civil society is becoming more informed, more reflexive, and more active in facilitating or blocking such new developments, which could have the potential to trigger widespread changes in economies, attitudes, and lifestyles, and address global problems like poverty, hunger, climate change, and environmental degradation. In the 1990s, companies using biotechnology to develop and offer novel products began to experience increasing pressure from civil society to disclose information about the risks associated with the use of biotechnology and GMOs, in particular. Although no harmful effects for humans or the environment have been factually demonstrated even to date (2008), this technology remains highly-contested and its introduction in Europe catalysed major companies to invest significant financial and human resources in stakeholder dialogue. A relatively new phenomenon at the time, with little theoretical backing, dialogue was seen to reflect a move towards greater engagement with stakeholders, commonly defined as those "individuals or groups with which. business interacts who have a 'stake', or vested interest in the firm" (Carroll, 1993:22) with whom firms are seen to be inextricably embedded (Andriof & Waddock, 2002). Regarding the organisation of this dissertation, Chapter 1 (Introduction) describes the context of the study, elaborates its significance for academics and business practitioners as an empirical work embedded in a sector at the heart of the debate on corporate social responsibility (CSR). Chapter 2 (Literature Review) traces the roots and evolution of CSR, drawing on Stakeholder Theory, Institutional Theory, Resource Dependence Theory, and Organisational Learning to establish what has already been developed in the literature regarding the stakeholder concept, motivations for engagement with stakeholders, the corporate response to external constituencies, and outcomes for the firm in terms of organisational learning and change. I used this review of the literature to guide my inquiry and to develop the key constructs through which I viewed the empirical data that was gathered. In this respect, concepts related to how the firm views itself (as a victim, follower, leader), how stakeholders are viewed (as a source of pressure and/or threat; as an asset: current and future), corporate responses (in the form of buffering, bridging, boundary redefinition), and types of organisational teaming (single-loop, double-loop, triple-loop) and change (first order, second order, third order) were particularly important in building the key constructs of the conceptual model that emerged from the analysis of the data. Chapter 3 (Methodology) describes the methodology that was used to conduct the study, affirms the appropriateness of the case study method in addressing the research question, and describes the procedures for collecting and analysing the data. Data collection took place in two phases -extending from August 1999 to October 2000, and from May to December 2001, which functioned as `snapshots' in time of the three companies under study. The data was systematically analysed and coded using ATLAS/ti, a qualitative data analysis tool, which enabled me to sort, organise, and reduce the data into a manageable form. Chapter 4 (Data Analysis) contains the three cases that were developed (anonymised as Pioneer, Helvetica, and Viking). Each case is presented in its entirety (constituting a `within case' analysis), followed by a 'cross-case' analysis, backed up by extensive verbatim evidence. Chapter 5 presents the research findings, outlines the study's limitations, describes managerial implications, and offers suggestions for where more research could elaborate the conceptual model developed through this study, as well as suggestions for additional research in areas where managerial implications were outlined. References and Appendices are included at the end. This dissertation results in the construction and description of a conceptual model, grounded in the empirical data and tied to existing literature, which portrays a set of elements and relationships deemed important for understanding the impact of stakeholder engagement for firms in terms of organisational learning and change. This model suggests that corporate perceptions about the nature of stakeholder influence the perceived value of stakeholder contributions. When stakeholders are primarily viewed as a source of pressure or threat, firms tend to adopt a reactive/defensive posture in an effort to manage stakeholders and protect the firm from sources of outside pressure -behaviour consistent with Resource Dependence Theory, which suggests that firms try to get control over extemal threats by focussing on the relevant stakeholders on whom they depend for critical resources, and try to reverse the control potentially exerted by extemal constituencies by trying to influence and manipulate these valuable stakeholders. In situations where stakeholders are viewed as a current strategic asset, firms tend to adopt a proactive/offensive posture in an effort to tap stakeholder contributions and connect the organisation to its environment - behaviour consistent with Institutional Theory, which suggests that firms try to ensure the continuing license to operate by internalising external expectations. In instances where stakeholders are viewed as a source of future value, firms tend to adopt an interactive/innovative posture in an effort to reduce or widen the embedded system and bring stakeholders into systems of innovation and feedback -behaviour consistent with the literature on Organisational Learning, which suggests that firms can learn how to optimize their performance as they develop systems and structures that are more adaptable and responsive to change The conceptual model moreover suggests that the perceived value of stakeholder contribution drives corporate aims for engagement, which can be usefully categorised as dialogue intentions spanning a continuum running from low-level to high-level to very-high level. This study suggests that activities aimed at disarming critical stakeholders (`manipulation') providing guidance and correcting misinformation (`education'), being transparent about corporate activities and policies (`information'), alleviating stakeholder concerns (`placation'), and accessing stakeholder opinion ('consultation') represent low-level dialogue intentions and are experienced by stakeholders as asymmetrical, persuasive, compliance-gaining activities that are not in line with `true' dialogue. This study also finds evidence that activities aimed at redistributing power ('partnership'), involving stakeholders in internal corporate processes (`participation'), and demonstrating corporate responsibility (`stewardship') reflect high-level dialogue intentions. This study additionally finds evidence that building and sustaining high-quality, trusted relationships which can meaningfully influence organisational policies incline a firm towards the type of interactive, proactive processes that underpin the development of sustainable corporate strategies. Dialogue intentions are related to type of corporate response: low-level intentions can lead to buffering strategies; high-level intentions can underpin bridging strategies; very high-level intentions can incline a firm towards boundary redefinition. The nature of corporate response (which encapsulates a firm's posture towards stakeholders, demonstrated by the level of dialogue intention and the firm's strategy for dealing with stakeholders) favours the type of learning and change experienced by the organisation. This study indicates that buffering strategies, where the firm attempts to protect itself against external influences and cant' out its existing strategy, typically lead to single-loop learning, whereby the firm teams how to perform better within its existing paradigm and at most, improves the performance of the established system - an outcome associated with first-order change. Bridging responses, where the firm adapts organisational activities to meet external expectations, typically leads a firm to acquire new behavioural capacities characteristic of double-loop learning, whereby insights and understanding are uncovered that are fundamentally different from existing knowledge and where stakeholders are brought into problem-solving conversations that enable them to influence corporate decision-making to address shortcomings in the system - an outcome associated with second-order change. Boundary redefinition suggests that the firm engages in triple-loop learning, where the firm changes relations with stakeholders in profound ways, considers problems from a whole-system perspective, examining the deep structures that sustain the system, producing innovation to address chronic problems and develop new opportunities - an outcome associated with third-order change. This study supports earlier theoretical and empirical studies {e.g. Weick's (1979, 1985) work on self-enactment; Maitlis & Lawrence's (2007) and Maitlis' (2005) work and Weick et al's (2005) work on sensegiving and sensemaking in organisations; Brickson's (2005, 2007) and Scott & Lane's (2000) work on organisational identity orientation}, which indicate that corporate self-perception is a key underlying factor driving the dynamics of organisational teaming and change. Such theorizing has important implications for managerial practice; namely, that a company which perceives itself as a 'victim' may be highly inclined to view stakeholders as a source of negative influence, and would therefore be potentially unable to benefit from the positive influence of engagement. Such a selfperception can blind the firm from seeing stakeholders in a more positive, contributing light, which suggests that such firms may not be inclined to embrace external sources of innovation and teaming, as they are focussed on protecting the firm against disturbing environmental influences (through buffering), and remain more likely to perform better within an existing paradigm (single-loop teaming). By contrast, a company that perceives itself as a 'leader' may be highly inclined to view stakeholders as a source of positive influence. On the downside, such a firm might have difficulty distinguishing when stakeholder contributions are less pertinent as it is deliberately more open to elements in operating environment (including stakeholders) as potential sources of learning and change, as the firm is oriented towards creating space for fundamental change (through boundary redefinition), opening issues to entirely new ways of thinking and addressing issues from whole-system perspective. A significant implication of this study is that potentially only those companies who see themselves as a leader are ultimately able to tap the innovation potential of stakeholder dialogue.

Analyzing hidden semantics in social bookmarking of open educational resources

Web 2.0 services such as social bookmarking allow users to manage and share the links they find interesting, adding their own tags for describingthem. This is especially interesting in the field of open educational resources, asdelicious is a simple way to bridge the institutional point of view (i.e. learningobject repositories) with the individual one (i.e. personal collections), thuspromoting the discovering and sharing of such resources by other users. In this paper we propose a methodology for analyzing such tags in order to discover hidden semantics (i.e. taxonomies and vocabularies) that can be used toimprove descriptions of learning objects and make learning object repositories more visible and discoverable. We propose the use of a simple statistical analysis tool such as principal component analysis to discover which tags createclusters that can be semantically interpreted. We will compare the obtained results with a collection of resources related to open educational resources, in order to better understand the real needs of people searching for open educational resources.

Performance analysis of software run-time behaviour using 3D-visualisation

Monimutkaisen tietokonejärjestelmän suorituskykyoptimointi edellyttää järjestelmän ajonaikaisen käyttäytymisen ymmärtämistä. Ohjelmiston koon ja monimutkaisuuden kasvun myötä suorituskykyoptimointi tulee yhä tärkeämmäksi osaksi tuotekehitysprosessia. Tehokkaampien prosessorien käytön myötä myös energiankulutus ja lämmöntuotto ovat nousseet yhä suuremmiksi ongelmiksi, erityisesti pienissä, kannettavissa laitteissa. Lämpö- ja energiaongelmien rajoittamiseksi on kehitetty suorituskyvyn skaalausmenetelmiä, jotka edelleen lisäävät järjestelmän kompleksisuutta ja suorituskykyoptimoinnin tarvetta. Tässä työssä kehitettiin visualisointi- ja analysointityökalu ajonaikaisen käyttäytymisen ymmärtämisen helpottamiseksi. Lisäksi kehitettiin suorituskyvyn mitta, joka mahdollistaa erilaisten skaalausmenetelmien vertailun ja arvioimisen suoritusympäristöstä riippumatta, perustuen joko suoritustallenteen tai teoreettiseen analyysiin. Työkalu esittää ajonaikaisesti kerätyn tallenteen helposti ymmärrettävällä tavalla. Se näyttää mm. prosessit, prosessorikuorman, skaalausmenetelmien toiminnan sekä energiankulutuksen kolmiulotteista grafiikkaa käyttäen. Työkalu tuottaa myös käyttäjän valitsemasta osasta suorituskuvaa numeerista tietoa, joka sisältää useita oleellisia suorituskykyarvoja ja tilastotietoa. Työkalun sovellettavuutta tarkasteltiin todellisesta laitteesta saatua suoritustallennetta sekä suorituskyvyn skaalauksen simulointia analysoimalla. Skaalausmekanismin parametrien vaikutus simuloidun laitteen suorituskykyyn analysoitiin.

Hiljaisen tiedon tallennusHämeen Puhelin Oy:ssä vuosina 2006-2010

Moderni liiketoiminta kohtaa uusia haasteita. Haasteiden aiheuttajia ovat mm. alenevat tuotantokustannukset ja kiihtyvä kilpailu. Jotta yritys kykenisi vastaamaan näihin moderneihin haasteisiin, sen tulee toimissaan hyödyntää tehokkaasti omat resurssit. Yrityksen suurimmat resurssit sijaitsevat henkilöstössä, heihin sitoutuneessa tiedossa. Tästä tiedosta iso osa on ns. hiljaista tietoa, jota ei voida perinteisin keinoin tallentaa. Tämä työ, tutkimus keskittyy tuon hiljaisen tiedon tallentamiseen. Tutkimuksen tavoitteena oli luoda malli, joka sisältää hiljaisen tiedon keruun, analyysin ja siirtämisen. Kokonaisuus muodostaa työkalun jolla teettävän yrityksen eläkkeelle jäävä henkilöstön hiljainen tieto tallennetaan yritykseen. Mallin lisäksi tutkimuksessa tuodaan esille aihetta koskevat erilaiset kehitysmahdollisuudet ja visiot.

Artificially Intelligent and Adaptive Methods for Prediction and Analysis of Superheater Fireside Corrosion in Fluidized Bed Boilers

Superheater corrosion causes vast annual losses for the power companies. With a reliable corrosion prediction method, the plants can be designed accordingly, and knowledge of fuel selection and determination of process conditions may be utilized to minimize superheater corrosion. Growing interest to use recycled fuels creates additional demands for the prediction of corrosion potential. Models depending on corrosion theories will fail, if relations between the inputs and the output are poorly known. A prediction model based on fuzzy logic and an artificial neural network is able to improve its performance as the amount of data increases. The corrosion rate of a superheater material can most reliably be detected with a test done in a test combustor or in a commercial boiler. The steel samples can be located in a special, temperature-controlled probe, and exposed to the corrosive environment for a desired time. These tests give information about the average corrosion potential in that environment. Samples may also be cut from superheaters during shutdowns. The analysis ofsamples taken from probes or superheaters after exposure to corrosive environment is a demanding task: if the corrosive contaminants can be reliably analyzed, the corrosion chemistry can be determined, and an estimate of the material lifetime can be given. In cases where the reason for corrosion is not clear, the determination of the corrosion chemistry and the lifetime estimation is more demanding. In order to provide a laboratory tool for the analysis and prediction, a newapproach was chosen. During this study, the following tools were generated: · Amodel for the prediction of superheater fireside corrosion, based on fuzzy logic and an artificial neural network, build upon a corrosion database developed offuel and bed material analyses, and measured corrosion data. The developed model predicts superheater corrosion with high accuracy at the early stages of a project. · An adaptive corrosion analysis tool based on image analysis, constructedas an expert system. This system utilizes implementation of user-defined algorithms, which allows the development of an artificially intelligent system for thetask. According to the results of the analyses, several new rules were developed for the determination of the degree and type of corrosion. By combining these two tools, a user-friendly expert system for the prediction and analyses of superheater fireside corrosion was developed. This tool may also be used for the minimization of corrosion risks by the design of fluidized bed boilers.

Dual activation of pathways regulated by steroid receptors and peptide growth factors in primary prostate cancer revealed by Factor Analysis of microarray data

Background: We use an approach based on Factor Analysis to analyze datasets generated for transcriptional profiling. The method groups samples into biologically relevant categories, and enables the identification of genes and pathways most significantly associated to each phenotypic group, while allowing for the participation of a given gene in more than one cluster. Genes assigned to each cluster are used for the detection of pathways predominantly activated in that cluster by finding statistically significant associated GO terms. We tested the approach with a published dataset of microarray experiments in yeast. Upon validation with the yeast dataset, we applied the technique to a prostate cancer dataset. Results: Two major pathways are shown to be activated in organ-confined, non-metastatic prostate cancer: those regulated by the androgen receptor and by receptor tyrosine kinases. A number of gene markers (HER3, IQGAP2 and POR1) highlighted by the software and related to the later pathway have been validated experimentally a posteriori on independent samples. Conclusion: Using a new microarray analysis tool followed by a posteriori experimental validation of the results, we have confirmed several putative markers of malignancy associated with peptide growth factor signalling in prostate cancer and revealed others, most notably ERRB3 (HER3). Our study suggest that, in primary prostate cancer, HER3, together or not with HER4, rather than in receptor complexes involving HER2, could play an important role in the biology of these tumors. These results provide new evidence for the role of receptor tyrosine kinases in the establishment and progression of prostate cancer.