Determination of stresses around a cylindrical single pile caused by horizontal movements of soils with the finitive element method

This study was carried out with the aim of modeling in 2D, in plain strain, the movement of a soft cohesive soil around a pile, in order to enable the determination of stresses resulting along the pile, per unit length. The problem in study fits into the large deformations problem and can be due to landslide, be close of depth excavations, to be near of zones where big loads are applied in the soil, etc. In this study is used an constitutive Elasto-Plastic model with the failure criterion of Mohr-Coulomb to model the soil behavior. The analysis is developed considering the soil in undrained conditions. To the modeling is used the finite element program PLAXIS, which use the Updated Lagrangian - Finite Element Method (UL-FEM). In this work, special attention is given to the soil-pile interaction, where is presented with some detail the formulation of the interface elements and some studies for a better understand of his behavior. It is developed a 2-D model that simulates the effect of depth allowing the study of his influence in the stress distribution around the pile. The results obtained give an important base about how behaves the movement of the soil around a pile, about how work the finite element program PLAXIS and how is the stress distribution around the pile. The analysis demonstrate that the soil-structure interaction modeled with the UL-FEM and interface elements is more appropriate to small deformations problems.

Thermal Residual Stresses in Functionally Graded Structures: a Didactic Case Study

Conferência: 2nd Experiment at International Conference - 18-20 September 2013

Miocene lithological, foraminiferal and palynological data from the Belverde borehole (Portugal)

XVIII Jornadas de Paleontología, 2002

Desulfovibrio vulgaris defenses against oxidative and nitrosative stresses

Dissertation presented to obtain the Ph.D degree in Biochemistry, Microbial Biochemistry

Simulation of metal quenching processes for the minimization of distortion and stresses

Quenching process, TRIP, J2-plasticity theory, phase transition, distortion

Dibenzofuran degradation by Sphingomonas wittichii RW1 under environmental stresses

Sphingomonas wittichii is a gram-negative Alpha-proteobacterium, capable of degrading xenobiotic compounds such as dibenzofuran (DBF), dibenzo-p-dioxin, carbazole, 2-hydroxybiphenyl or nitro diphenyl ether herbicides. The metabolism of strain RW1 has been the subject of previous studies and a number of genes involved in DBF degradation have been characterized. It is known that RW1 posseses a unique initial DBF dioxygenase (encoded by the dxnAl gene) that catalyzes the first step in the degradation pathway. None of the organisms known to be able to degrade DBF have a similar dioxygenase, the closest match being the DBF dioxygenase from Rhodococcus sp. with an overall amino acid similarity of 45%. Genes participating in the conversion of the metabolite salicylate via the ortho-cleavage pathway to TCA cycle intermediates were identified as well. Apart from this scarce information, however, there is a lack of global knowledge on the genes that are involved in DBF degradation by strain RW1 and the influence of environmental stresses on DBF-dependent global gene expression. A global analysis is necessary, because it may help to better understand the behaviour of the strain under field conditions and suggest improvements for the current bioaugmentation practice. Chapter 2 describes the results of whole-genome analysis to characterize the genes involved in DBF degradation by RW1. Micro-array analysis allowed us to detect differences in gene transcription when strain RW1 was exposed to DBF. This was complemented by ultra-high throughput sequencing of mutants no longer capable of growing on salicylate and DBF. Some of the genes of the ortho-cleavage pathway were induced 2 to 4 times in the presence of DBF, as well as the initial DBF dioxygenase. However two gene clusters, named 4925 and 5102 were induced up to 19 times in response to DBF induction. The cluster 4925 is putatively participating in a meta-cleavage pathway while the cluster 5102 might be part of a gentisate pathway. The three pathways, ortho-cleavage, meta-cleavage and gentisate pathway seem to be active in parallel when strain RW1 is exposed to DBF, presenting evidence for a redundancy of genes for DBF degradation in the genome of RW1. Chapter 3 focuses on exploiting genetic tools to construct bioreporters representative for DBF degradation in RW1. A set of basic tools for genetic manipulation in Sphingomonas wittichii RW1 was tested and optimized. Both plasmids and mini-transposons were evaluated for their ability to be maintained in RW1 with or without antibiotic selection pressure, and for their ability to lead to fluorescent protein expression in strain RW1 from a constitutive promoter. Putative promoter regions of three of the previously found DBF-induced genes (Swit_4925, Swit_5102 and Swit_4897-dxnAl) were then used to construct eg/^-bioreporters in RW1. Chapter 4 describes the use of the constructed RW1-based bioreporter strains for examining the expression of the DBF degradation pathway genes under microcosm conditions. The bioreporter strains were first exposed to different carbon sources in liquid culture to calibrate the egfp induction. Contrary to our expectations from micro-array analysis only the construct with the promoter from gene cluster 4925 responded to DBF, whereas the other two constructs did not show specific induction with DBF. The response from the bioreporters was subsequently tested for sensitivity to water stress, given that this could have an important impact in soils. Exposure to liquid cultures with decreasing water potential, achieved by NaCl or PEG addition to the growth media, showed that eGFP expression in RW1 from the promoter regions 4925 and 5102 was not directly influenced by water stress, but only through an overall reduction in growth rate. In contrast, expression of eGFP from the dxnAl or an uspA promoter was also directly dependent on the extent of water stress. The RW1 with the 4925 construct was subsequently used in soil microcosms to evaluate DBF bioavailability to the cells in presence or absence of native microbiota or other contaminated material. We found that RW1 could grow on DBF added to soil, but bioreporter expression suggested that competition with native microbiota for DBF intermediates may limit its ability to proliferate to a maximum. Chapter 5 describes the results from the experiments carried out to more specifically detect genes of RW1 that might be implicated in water stress resistance. Hereto we created transposon mutagenesis libraries in RW1, either with a classical mini-Tn5 or with a variant that would express egfp when the transposon would insert in a gene induced under water stress. Classical mutant libraries were screened by replica plating under high and low water stress conditions (achieved by adding NaCl to the agar medium). In addition, we screened for smaller microcolonies formed by mutants in agarose beads that could be analized with flow cytometry. A number of mutants impaired to grow on NaCl-supplemented media were recovered and the transposon insertion sites sequenced. In a second procedure we screened by flow cytometry for mutants with a higher eGFP production after exposure to growth medium with higher NaCl concentrations. Mutants from both libraries rarely overlapped. Discovered gene functions of the transposon insertions pointed to compatible solute synthesis (glutamate and proline), cell membrane synthesis and modification of cell membrane composition. The results obtained in the present study give us a more complete picture of the mechanisms of DBF degradation by S. wittichii RW1, how it reacts to different DBF availability and how the DBF catabolic activity may be affected by the conditions found in contaminated environments. - Sphingomonas wittichii est une alpha-protéobactérie gram-négative, capable de dégrader des composés xénobiotiques tels que le dibenzofurane (DBF), la dibenzo-p-dioxine, le carbazole, le 2-hydroxybiphényle ou les herbicides dérivés du nitro-diphényléther. Le métabolisme de la souche RW1 a fait l'objet d'études antérieures et un certain nombre de gènes impliqués dans la dégradation du DBF ont été caractérisés. Il est connu que RW1 possède une unique dioxygénase DBF initiale (codée par le gène dxnAl) qui catalyse la première étape de la voie de dégradation. Aucun des organismes connus pour être capables de dégrader le DBF n'a de dioxygénase similaire. L'enzyme la plus proche étant la DBF dioxygénase de Rhodococcus sp. avec 45% d'acides aminés conservés. Les gènes qui participent à la transformation du salicylate en métabolites intermédiaires du cycle de Krebs par la voie ort/io-cleavage ont aussi été identifiés. Outre ces informations lacunaires, il y a un manque de connaissances sur l'ensemble des gènes impliqués dans la dégradation du DBF par la souche RW1 ainsi que l'effet des stress environnementaux sur l'expression génétique globale, en présence du DBF. Une analyse globale est nécessaire, car elle peut aider à mieux comprendre le comportement de la souche dans les conditions de terrain et de proposer des améliorations pour l'utilisation de la bio-augmentation comme technique de bio-remédiation. Le chapitre 2 décrit les résultats de l'analyse du génome pour caractériser les gènes impliqués dans la dégradation du DBF par RW1. Une analyse de micro-arrays nous a permis de détecter des différences dans la transcription des gènes lorsque la souche RW1 a été exposée au DBF. L'analyse a été complétée par le criblage à ultra-haut débit de mutants qui n'étaient plus capables de croître avec le salicylate ou le DBF comme seule source de carbone. Certains des gènes de la voie ortho-cleavage, dont la DBF dioxygénase initiale, ont xî été induits 2 à 4 fois, en présence du DBF. Cependant, deux groupes de gènes, nommés 4925 et 5102 ont été induits jusqu'à 19 fois en réponse au DBF. Le cluster 4925 participe probablement dans une voie de meta-cleavage tandis que le cluster 5102 pourrait faire partie d'une voie du gentisate. Les trois voies, ortho-cleavage, meta-cleavage et la voie du gentisate semblent être activées en parallèle lorsque la souche RW1 est exposée au DBF, ce qui représente une redondance de voies pour la dégradation du DBF dans le génome de RW1. Le chapitre 3 se concentre sur l'exploitation des outils génétiques pour la construction de biorapporteurs de la dégradation du DBF par RW1. Un ensemble d'outils de base pour la manipulation génétique dans Sphingomonas wittichii RW1 a été testé et optimisé. Deux plasmides et mini-transposons ont été évalués pour leur capacité à être maintenu dans RW1 avec ou sans pression de sélection par des antibiotiques, et pour leur capacité à exprimer la protéine fluorescente verte (eGFP) dans la souche RW1. Les trois promoteurs des gènes Swit_4925, Swit_5102 et Swit_4897 (dxnAl), induits en réponse au DBF, ont ensuite été utilisés pour construire des biorapporteurs dans RW1. Le chapitre 4 décrit l'utilisation des souches biorapportrices construites pour l'analyse de l'expression des gènes de la voie de dégradation du DBF dans des microcosmes avec différents types de sols. Les souches biorapportrices ont d'abord été exposées à différentes sources de carbone en cultures liquides afin de calibrer l'induction de la eGFP. La construction avec le promoteur du gène 4925 a permis une réponse au DBF. Mais contrairement à nos attentes, basées sur les résultats de l'analyse des micro-arrays, les deux autres constructions n'ont pas montré d'induction spécifique au DBF. La réponse des biorapporteurs a ensuite été testée pour la sensibilité au stress hydrique, étant donné que cela pourrait avoir un impact important dans les microcosmes. La diminution du potentiel hydrique en culture liquide est obtenue par addition de NaCl ou de PEG au milieu de croissance. Nous avons montré que l'expression de la eGFP contrôlée par les promoteurs 4925 et 5102 n'était pas directement influencée par le stress hydrique, mais seulement par une réduction globale des taux de croissance. En revanche, l'expression de la eGFP dépendante des promoteurs dxnAl et uspA était aussi directement dépendante de l'ampleur du stress hydrique. La souche avec la construction 4925 a été utilisée par la suite dans des microcosmes avec différents types de sols pour évaluer la biodisponibilité du DBF en présence ou absence des microbes indigènes et d'autres composés contaminants. Nous avons constaté que RW1 pouvait se développer si le DBF a été ajouté au sol, mais l'expression de la eGFP par le biorapporteur suggère que la compétition avec la microbiota indigène pour les métabolites intermédiaires du DBF peut limiter sa capacité à proliférer de manière optimale. Le chapitre 5 décrit les résultats des expériences réalisées afin de détecter spécifiquement les gènes de RW1 qui pourraient être impliquées dans la résistance au stress hydrique. Ici on a crée des bibliothèques de mutants de RW1 par transposon, soit avec un mini-Tn5 classique ou avec une variante qui exprime la eGFP lorsque le transposon s'insère dans un gène induit par le stress hydrique. Les bibliothèques de mutants ont été criblées par la méthode classique de repiquage sur boîtes, dans des conditions de stress hydrique élevé (obtenu par l'addition de NaCl dans les boîtes). En outre, nous avons criblé des micro¬colonies dans des billes d'agarose qui ont pu être analysées par cytométrie de flux. Un certain nombre de mutants déficients à croître sur des milieux supplémentés avec du NaCl ont été isolés et les sites d'insertion du transposon séquencés. Dans une deuxième procédure nous avons criblé par cytométrie de flux des mutants avec une production de eGFP supérieure, après exposition à un milieu de croissance avec une concentration élevée de NaCl. Les mutants obtenus dans les deux bibliothèques n'étaient pas similaires. Les fonctions des gènes où se trouvent les insertions de transposons sont impliqués dans la synthèse de solutés compatibles (glutamate et de la proline), dans la synthèse de la membrane cellulaire et dans la modification de la composition de la membrane cellulaire. Les résultats obtenus dans la présente étude nous donnent une image plus complète des mécanismes de dégradation du DBF par S. wittichii RW1, comment cette souche réagit à la disponibilité du DBF et comment l'activité catabolique peut être affectée par les conditions rencontrées dans des environnements contaminés.

The borehole-fluid effect in electrical resistivity imaging

Fluid that fills boreholes in crosswell electrical resistivity investigations provides the necessary electrical contact between the electrodes and the rock formation but it is also the source of image artifacts in standard inversions that do not account for the effects of the boreholes. The image distortions can be severe for large resistivity contrasts between the rock formation and borehole fluid and for large borehole diameters. We have carried out 3D finite-element modeling using an unstructured-grid approach to quantify the magnitude of borehole effects for different resistivity contrasts, borehole diameters, and electrode configurations. Relatively common resistivity contrasts of 100:1 and borehole diameters of 10 and 20 cm yielded, for a bipole length of 5 m, apparent resistivity underestimates of approximately 12% and 32% when using AB-MN configurations and apparent resistivity overestimates of approximately 24% and 95% when using AM-BN configurations. Effects are generally more severe at shorter bipole spacings. We report the results obtained by either including or ignoring the boreholes in inversions of 3D field data from a test site in Switzerland, where approximately 10,000 crosswell resistivity-tomography measurements were made across six acquisition planes among four boreholes. Inversions of raw data that ignored the boreholes filled with low-resistivity fluid paradoxically produced high-resistivity artifacts around the boreholes. Including correction factors based on the modeling results fora ID model with and without the boreholes did not markedly improve the images. The only satisfactory approach was to use a 3D inversion code that explicitly incorporated the boreholes in the actual inversion. This new approach yielded an electrical resistivity image that was devoid of artifacts around the boreholes and that correlated well with coincident crosswell radar images.

Fluid flow through the sedimentary cover in northern Switzerland recorded by calcite-celestite veins (Oftringen borehole, Olten)

Abundant veins filled by calcite, celestite and pyrite were found in the core of a 719 m deep borehole drilled in Oftringen near Olten, located in the north-western Molasse basin, close to the thrust of the Folded Jura. Host rocks are calcareous marl, argillaceous limestone and limestone of the Dogger and Malm. The delta O-18 values of vein calcite are lower than in host rock carbonate and, together with microthermometric data from fluid inclusions in vein calcite, indicate precipitation from a seawater-dominated fluid at average temperatures of 56-68A degrees C. Such temperatures were reached at the time of maximum burial of the sedimentary pile in the late Miocene. The depth profile of delta C-13 and Sr-87/Sr-86 values and Sr content of both whole-rock carbonate and vein calcite show marked trends towards negative delta C-13, high Sr-87/Sr-86, and low Sr content in the uppermost 50-150 m of the Jurassic profile (upper Oxfordian). The Sr-87/Sr-86 of vein minerals is generally higher than that of host rock carbonate, up to very high values corresponding to Burdigalian seawater (Upper Marine Molasse, Miocene), which represents the last marine incursion in the region. No evidence for internally derived radiogenic Sr (clay minerals) has been found and so an external source is required. S and O isotope composition of vein celestite and pyrite can be explained by bacterial reduction of Miocene seawater sulphate. The available data set suggests the vein mineralization precipitated from descending Burdigalian seawater and not from a fluid originating in the underlying Triassic evaporites.

A pseudo-spectral method for simulating of poro-elastic seismic wave propagation in complex borehole environments

We present a novel numerical approach for the comprehensive, flexible, and accurate simulation of poro-elastic wave propagation in cylindrical coordinates. An important application of this method is the modeling of complex seismic wave phenomena in fluid-filled boreholes, which represents a major, and as of yet largely unresolved, computational problem in exploration geophysics. In view of this, we consider a numerical mesh consisting of three concentric domains representing the borehole fluid in the center, the borehole casing and the surrounding porous formation. The spatial discretization is based on a Chebyshev expansion in the radial direction, Fourier expansions in the other directions, and a Runge-Kutta integration scheme for the time evolution. A domain decomposition method based on the method of characteristics is used to match the boundary conditions at the fluid/porous-solid and porous-solid/porous-solid interfaces. The viability and accuracy of the proposed method has been tested and verified in 2D polar coordinates through comparisons with analytical solutions as well as with the results obtained with a corresponding, previously published, and independently benchmarked solution for 2D Cartesian coordinates. The proposed numerical solution also satisfies the reciprocity theorem, which indicates that the inherent singularity associated with the origin of the polar coordinate system is handled adequately.

Mapping cell-matrix stresses during stretch reveals inelastic reorganization of the cytoskeleton.

The mechanical properties of the living cell are intimately related to cell signaling biology through cytoskeletal tension. The tension borne by the cytoskeleton (CSK) is in part generated internally by the actomyosin machinery and externally by stretch. Here we studied how cytoskeletal tension is modified during stretch and the tensional changes undergone by the sites of cell-matrix interaction. To this end we developed a novel technique to map cell-matrix stresses during application of stretch. We found that cell-matrix stresses increased with imposition of stretch but dropped below baseline levels on stretch release. Inhibition of the actomyosin machinery resulted in a larger relative increase in CSK tension with stretch and in a smaller drop in tension after stretch release. Cell-matrix stress maps showed that the loci of cell adhesion initially bearing greater stress also exhibited larger drops in traction forces after stretch removal. Our results suggest that stretch partially disrupts the actin-myosin apparatus and the cytoskeletal structures that support the largest CSK tension. These findings indicate that cells use the mechanical energy injected by stretch to rapidly reorganize their structure and redistribute tension.

Residual thermomechanical stresses in thinned-chip assemblies

A new technology for the three-dimensional (3-D) stacking of very thin chips on a substrate is currently under development within the ultrathin chip stacking (UTCS) Esprit Project 24910. In this work, we present the first-level UTCS structure and the analysis of the thermomechanical stresses produced by the manufacturing process. Chips are thinned up to 10 or 15 m. We discuss potentially critical points at the edges of the chips, the suppression of delamination problems of the peripheral dielectric matrix and produce a comparative study of several technological choices for the design of metallic interconnect structures. The purpose of these calculations is to give inputs for the definition of design rules for this technology. We have therefore undertaken a programme that analyzes the influence of sundry design parameters and alternative development options. Numerical analyses are based on the finite element method.

Expression of the NH(2)-terminal fragment of RasGAP in pancreatic beta-cells increases their resistance to stresses and protects mice from diabetes.

OBJECTIVE: Our laboratory has previously established in vitro that a caspase-generated RasGAP NH(2)-terminal moiety, called fragment N, potently protects cells, including insulinomas, from apoptotic stress. We aimed to determine whether fragment N can increase the resistance of pancreatic beta-cells in a physiological setting. RESEARCH DESIGN AND METHODS: A mouse line, called rat insulin promoter (RIP)-N, was generated that bears a transgene containing the rat insulin promoter followed by the cDNA-encoding fragment N. The histology, functionality, and resistance to stress of RIP-N islets were then assessed. RESULTS: Pancreatic beta-cells of RIP-N mice express fragment N, activate Akt, and block nuclear factor kappaB activity without affecting islet cell proliferation or the morphology and cellular composition of islets. Intraperitoneal glucose tolerance tests revealed that RIP-N mice control their glycemia similarly as wild-type mice throughout their lifespan. Moreover, islets isolated from RIP-N mice showed normal glucose-induced insulin secretory capacities. They, however, displayed increased resistance to apoptosis induced by a series of stresses including inflammatory cytokines, fatty acids, and hyperglycemia. RIP-N mice were also protected from multiple low-dose streptozotocin-induced diabetes, and this was associated with reduced in vivo beta-cell apoptosis. CONCLUSIONS: Fragment N efficiently increases the overall resistance of beta-cells to noxious stimuli without interfering with the physiological functions of the cells. Fragment N and the pathway it regulates represent, therefore, a potential target for the development of antidiabetes tools.