First year industrial design studio-based teaching pedagogies and students’ engagement

Student engagement tends to be viewed as a reflection of learning processes, and in the context of first year university studies, it is a crucial means of an educational process that establishes the foundations for successful later year studies (Krausse and Coates, 2008). In the context of first year design studio teaching in higher education, fostering students’ positive engagement poses challenges to design educators as current trends set these design studios to be large size classes that makes difficult to manage and follow up students’ individual learning experiences. At QUT’s first year industrial design studio classes we engage in a variety of teaching pedagogies from which we identify two of them as instrumental vehicles to foster positive student engagement. Concept bombs and the field trip experience provide such platform as shown in student responses through a learning experience survey.

Vulnerability and damage analysis of reinforced concrete framed buildings subjected to near field blast events

Terrorists usually target high occupancy iconic and public buildings using vehicle borne incendiary devices in order to claim a maximum number of lives and cause extensive damage to public property. While initial casualties are due to direct shock by the explosion, collapse of structural elements may extensively increase the total figure. Most of these buildings have been or are built without consideration of their vulnerability to such events. Therefore, the vulnerability and residual capacity assessment of buildings to deliberately exploded bombs is important to provide mitigation strategies to protect the buildings' occupants and the property. Explosive loads and their effects on a building have therefore attracted significant attention in the recent past. Comprehensive and economical design strategies must be developed for future construction. This research investigates the response and damage of reinforced concrete (RC) framed buildings together with their load bearing key structural components to a near field blast event. Finite element method (FEM) based analysis was used to investigate the structural framing system and components for global stability, followed by a rigorous analysis of key structural components for damage evaluation using the codes SAP2000 and LS DYNA respectively. The research involved four important areas in structural engineering. They are blast load determination, numerical modelling with FEM techniques, material performance under high strain rate and non-linear dynamic structural analysis. The response and damage of a RC framed building for different blast load scenarios were investigated. The blast influence region for a two dimensional RC frame was investigated for different load conditions and identified the critical region for each loading case. Two types of design methods are recommended for RC columns to provide superior residual capacities. They are RC columns detailing with multi-layer steel reinforcement cages and a composite columns including a central structural steel core. These are to provide post blast gravity load resisting capacity compared to typical RC column against a catastrophic collapse. Overall, this research broadens the current knowledge of blast and residual capacity analysis of RC framed structures and recommends methods to evaluate and mitigate blast impact on key elements of multi-storey buildings.

Dino De Laurentiis and Australia: Creating a film industry on the Gold Coast

When Dino De Laurentiis died in October 2010, most media outlets, including Australian based publications and services reported the news and most newspapers carried obituaries. Obituarists described Dino’s many failures in great detail; as film historian David Thomson wrote in The Guardian ‘there were enough bombs from Dino to level a large city’ (Thomson 2010). But Dino was also responsible in no small way for the building of new media cities in Rome, in North Carolina, and in Queensland. In this article, we draw on some of our research for that book to outline in more detail the importance of Dino De Laurentiis’s involvement to the Gold Coast studios and to film and television production in Queensland.

Proyecto de un parque eólico para la alimentación de las bombas de la central hidráulica de Belesar (Lugo).

[ES]El proyecto consiste en el estudio de las necesidades energéticas de las bombas de una central hidráulica y la construcción de un parque eólico para satisfacer dichas necesidades. Para ello será necesario llevar a cabo un estudio del área y así encontrar el lugar más adecuado para ubicar los aerogeneradores, teniendo en cuenta la frecuencia, velocidad y dirección de los vientos predominantes del lugar. Después habrá que estudiar el mercado y elegir el aerogenerador adecuado para las condiciones del lugar y del viento, atendiendo también a otras cuestiones de relevancia. Se estudiará, además, la posibilidad de inyectar un posible exceso de electricidad a la red general. Una vez hecho esto, habrá que calcular el coste del proyecto.

Blast fishing in southwest Sulawesi, Indonesia

Blast fishing has been a widespread and accepted fishing technique in Indonesia for over 50 years. The largest coral reef fishery in Indonesia is around the Spermonde archipelago in southwest Sulawesi. With the expanding population and the increasing demand for fish for export, fishing has intensified and fish catches per unit effort are stable or declining. The use of bombs made with a mixture of kerosene and fertilizer is widely prevalent. In the market of the city of Ujung Pendang, an estimated 10-40% of the fish from capture fisheries are caught through blast fishing. This is destroying the hard corals. Blast fishing is seen by the fishers as being much easier and results in higher catches than with other traditional methods. They believe that the only way to limit this practice is with stricter policing and higher fines. An effective management option could be to establish national marine reserves within the archipelago, supported by other income-generating activities.

穿甲弹发射故障的动态诊断

对某研制阶段的高膛压火炮发射穿甲弹研究发现,当静强度安全系数较大时多次发生断弹事故,这说明此时动强度已成为主要矛盾,应用模态实验技术研究了脱壳穿甲弹动态特性,获得了该脱壳穿甲弹结构模态参数,模态分析方法所获得的动态薄弱截面位置与试验弹断弹情况相吻合,为其发射故障诊断提供了实验依据。

Sublime Lessons: Education and Ambivalence in War Exhibitions

This paper examines how experiences of the sublime are regulated in the war exhibitions of modern museums. Ambivalence is a key feature of the sublime because subjects are forced to negotiate simultaneous feelings of terror and awe in the face of something unrepresentable like war. This paper analyses how war exhibitions dispel ambivalence by resuscitating a Kantian sublime full of resolution, catharsis and transcendence. In this context, potentially destabilising encounters with horrific objects (e.g. guns, bombs, shrapnel) are neutralised by didactic 'Lessons of War' and celebratory narratives of victory. Using examples from the United States Holocaust Memorial Museum, the Imperial War Museum in London and the Smithsonian Institution, this paper illustrates how conventional war exhibitions reproduce a politics of consensus by carefully managing the experience of the sublime.

The Perils of Moviegoing in America, 1896-1950

The Perils of Moviegoing in America is a film history that examines the various physical and (perceived) moral dangers facing audiences during the first fifty years of film exhibition.

Chapter 1: “Conflagration”
As early as 1897, a major fire broke out at a film exhibition in San Francisco, with flames burning the projectionist and nearby audience members. From that point until the widespread adoption of safety stock in 1950, fires were a very common movie-going experience. Hundreds of audience members lost their lives in literally thousands of theatre fires, ranging from early nickelodeons to the movie palaces of the thirties and forties.

Chapter 2: “Thieves Among Us”
Bandits robbed movie theatres on hundreds of occasions from the early days of film exhibition through the end of the Great Depression. They held up ticket booths, and they dynamited theatre safes. They also shot theatre managers, ushers, and audience members, as a great many of the robberies occurred while movies were playing on the screens inside.

Chapter 3: “Bombs Away”
Bombings at movie theatres became common in small towns and large cities on literally hundreds of occasions from 1914 to the start of World War II. Some were incendiary bombs, and some were stench bombs; both could be fatal, whether due to explosions or to the trampling of panicked moviegoers

Chapter 4: “It’s Catching”
Widespread movie-going in the early 20th century provoked an outcry from numerous doctors and optometrists who believed that viewing films could do irreparable harm to the vision of audience members. Medical publications (including the Journal of the American Medical Association) published major studies on this perceived problem, which then filtered into popular-audience magazines and newspapers.

Chapter 5: “The Devil’s Apothecary Shops”
Sitting in the dark with complete strangers proved worrisome for many early filmgoers, who had good reason to be concerned. Darkness meant that prostitutes could easily work in the balconies of some movie theatres, as could “mashers” who molested female patrons (and sometimes children) after the lights were dimmed. That was all in addition to the various murderers who used the cover of darkness to commit their crimes at movie theatres.

Chapter 6: “Blue Sundays”
Blue laws were those regulations that prohibited businesses from operating on Sundays. Most communities across the US had such legislation on their books, which by the nickelodeon era were at odds with the thousands of filmgoers who went to the movies every Sunday. Theatre managers were often arrested, making newspaper headlines over and over again. Police sometimes even arrested entire film audiences as accomplices in the Blue Law violations.

Chapter 7: “Something for Nothing”
In an effort to bolster ticket sales, many movie theatres in the 1910s began to hold lotteries in which lucky audience members won cash prizes; by the time of the Great Depression, lotteries like “Bank Night” became a common aspect of the theatre-going enterprise. However, reception studies have generally overlooked the intense (and sometimes coordinated) efforts by police, politicians, and preachers to end this practice, which they viewed as illegal and immoral gambling.

Microflare Activity Driven By Forced Magnetic Reconnection.

High cadence, multiwavelength, optical observations of a solar active region, obtained with the Swedish Solar Telescope, are presented. Two magnetic bright points are seen to separate in opposite directions at a constant velocity of 2.8 km s(-1). After a separation distance of approximate to 4400 km is reached, multiple Ellerman bombs are observed in both Ha and Ca-K images. As a result of the Ellerman bombs, periodic velocity perturbations in the vicinity of the magnetic neutral line, derived from simultaneous Michelson Doppler Imager data, are generated with amplitude +/-6 km s(-1) and wavelength approximate to 1000 km. The velocity oscillations are followed by an impulsive brightening visible in Ha and Ca-K, with a peak intensity enhancement of 63%. We interpret these velocity perturbations as the magnetic field deformation necessary to trigger forced reconnection. A time delay of approximate to 3 minutes between the Ha-wing and Ca-K observations indicates that the observed magnetic reconnection occurs at a height of similar to 200 km above the solar surface. These observations are consistent with theoretical predictions and provide the first observational evidence of microflare activity driven by forced magnetic reconnection.

The effects of the Omagh bomb on adolescent mental health: a school-based study

Background: The main objective of this study was to assess psychiatric morbidity among adolescentsfollowing the Omagh car bombing in Northern Ireland in 1998.

Methods: Data was collected within schools from adolescents aged between 14 and 18 years via a selfcompletionbooklet comprised of established predictors of PTSD; type of exposure, initialemotional response, long-term adverse physical problems, predictors derived from Ehlers andClark’s (2000) cognitive model, a PTSD symptoms measure (PDS) and the General HealthQuestionnaire (GHQ).

Results:Those with more direct physical exposure were significantly more likely to meet caseness onthe GHQ and the PDS. The combined pre and peri trauma risk factors highlighted in previousmeta-analyses accounted for 20% of the variance in PDS scores but the amount of varianceaccounted for increased to 56% when the variables highlighted in Ehlers and Clark’scognitive model for PTSD were added.

Conclusions: High rates of chronic PTSD were observed in adolescents exposed to the bombing. Whilstincreased exposure was associated with increased psychiatric morbidity, the best predictors ofPTSD were specific aspects of the trauma (‘seeing someone you think is dying’), what youare thinking during the event (‘think you are going to die’) and the cognitive mechanismsemployed after the trauma. As these variables are in principle amenable to treatment theresults have implications for teams planning treatment interventions after future traumas.

Mafic Plinian volcanism and ignimbrite emplacement at Tofua volcano, Tonga

Tofua Island is the largest emergent mafic volcano within the Tofua arc, Tonga, southwest Pacific. The volcano is dominated by a distinctive caldera averaging 4 km in diameter, containing a freshwater lake in the south and east. The latest paroxysmal (VEI 5-6) explosive volcanism includes two phases of activity, each emplacing a high-grade ignimbrite. The products are basaltic andesites with between 52 wt.% and 57 wt.% SiO(2). The first and largest eruption caused the inward collapse of a stratovolcano and produced the 'Tofua' ignimbrite and a sub-circular caldera located slightly northwest of the island's centre. This ignimbrite was deposited in a radial fashion over the entire island, with associated Plinian fall deposits up to 0.5 m thick on islands > 40 km away. Common sub-rounded and frequently cauliform scoria bombs throughout the ignimbrite attest to a small degree of marginal magma-water interaction. The common intense welding of the coarse-grained eruptive products, however, suggests that the majority of the erupted magma was hot, water-undersaturated and supplied at high rates with moderately low fragmentation efficiency and low levels of interaction with external water. We propose that the development of a water-saturated dacite body at shallow (<6 km) depth resulted in failure of the chamber roof to cause sudden evacuation of material, producing a Plinian eruption column. Following a brief period of quiescence, largescale faulting in the southeast of the island produced a second explosive phase believed to result from recharge of a chemically distinct magma depleted in incompatible elements. This similar, but smaller eruption, emplaced the 'Hokula' Ignimbrite sheet in the northeast of the island. A maximum total volume of 8 km(3) of juvenile material was erupted by these events. The main eruption column is estimated to have reached a height of similar to 12 km, and to have produced a major atmospheric injection of gas, and tephra recorded in the widespread series of fall deposits found on coral islands 40-80 km to the east (in the direction of regional upper-tropospheric winds). Radiocarbon dating of charcoal below the Tofua ignimbrite and organic material below the related fall units imply this eruption sequence occurred post 1,000 years BP. We estimate an eruption magnitude of 2.24x10(13) kg, sulphur release of 12 Tg and tentatively assign this eruption to the AD 1030 volcanic sulphate spike recorded in Antarctic ice sheet records.

Statistical Analysis of Small Ellerman Bomb Events

The properties of Ellerman bombs (EBs), small-scale brightenings in the Hα line wings, have proved difficult to establish because their size is close to the spatial resolution of even the most advanced telescopes. Here, we aim to infer the size and lifetime of EBs using high-resolution data of an emerging active region collected using the Interferometric BIdimensional Spectrometer (IBIS) and Rapid Oscillations of the Solar Atmosphere (ROSA) instruments as well as the Helioseismic and Magnetic Imager (HMI) onboard the Solar Dynamics Observatory (SDO). We develop an algorithm to track EBs through their evolution, finding that EBs can often be much smaller (around 0.3″) and shorter-lived (less than one minute) than previous estimates. A correlation between G-band magnetic bright points and EBs is also found. Combining SDO/HMI and G-band data gives a good proxy of the polarity for the vertical magnetic field. It is found that EBs often occur both over regions of opposite polarity flux and strong unipolar fields, possibly hinting at magnetic reconnection as a driver of these events.The energetics of EB events is found to follow a power-law distribution in the range of a nanoflare (1022-25 ergs).

Reactores a tório: o futuro da energia nuclear de fissão

Dissertação para a obtenção do grau de mestre em Engenharia Electrotécnica Ramo de Energia

The direct determination of rare earth elements in basaltic and related rocks using ICP-MS: Testing the efficiency of microwave oven sample decomposition procedures

Tests are described showing the results obtained for the determination of REE and the trace elements Rb, Y, Zr, Nb, Cs, Ba, Hf, Ta, Pb, Th and U with ICP-MS methodology for nine basaltic reference materials, and thirteen basalts and amphibolites from the mafic-ultramafic Niquelandia Complex, central Brazil. Sample decomposition for the reference materials was performed by microwave oven digestion (HF and HNO(3), 100 mg of sample), and that for the Niquelandia samples also by Parr bomb treatment (5 days at 200 degrees C, 40 mg of sample). Results for the reference materials were similar to published values, thus showing that the microwave technique can be used with confidence for basaltic rocks. No fluoride precipitates were observed in the microwave-digested solutions. Total recovery of elements, including Zr and Hf, was obtained for the Niquelandia samples, with the exception of an amphibolite. For this latter sample, the Parr method achieved a total digestion, but not so the microwave decomposition; losses, however, were observed only for Zr and Hf, indicating difficulty in dissolving Zr-bearing minerals by microwave acid attack.

Construção, caracterização e aplicação de eletrodos para descarga por arco de cátodo oco

The system built to characterize electrodes and, consequently, deposited fine films are constituted by a hollow cathode that works to discharges and low pressures (approximately 10-3 to 5 mbar), a source DC (0 to 1200 V), a cylindrical camera of closed borossilicato for flanges of stainless steel with an association of vacuum bombs mechanical and spread. In the upper flange it is connected the system of hollow cathode, which possesses an entrance of gas and two entrances for its refrigeration, the same is electrically isolated of the rest of the equipment and it is polarized negatively. In front of the system of hollow cathode there is a movable sample in stainless steel with possibility of moving in the horizontal and vertical. In the vertical, the sample can vary its distance between 0 and 70 mm and, in the horizontal, can leave completely from the front of the hollow cathode. The sample and also the cathode hollow are equipped with cromel-alumel termopares with simultaneous reading of the temperatures during the time of treatment. In this work copper electrodes, bronze, titanium, iron, stainless steel, powder of titanium, powder of titanium and silício, glass and ceramic were used. The electrodes were investigated relating their geometry change and behavior of the plasma of the cavity of hollow cathode and channel of the gas. As the cavity of hollow cathode, the analyzed aspects were the diameter and depth. With the channel of the gas, we verified the diameter. In the two situations, we investigated parameters as flow of the gas, pressure, current and applied tension in the electrode, temperature, loss of mass of the electrode with relationship at the time of use. The flow of gas investigated in the electrodes it was fastened in a work strip from 15 to 6 sccm, the constant pressure of work was among 2.7 to 8 x 10-2 mbar. The applied current was among a strip of work from 0,8 to 0,4 A, and their respective tensions were in a strip from 400 to 220 V. Fixing the value of the current, it was possible to lift the curve of the behavior of the tension with the time of use. That curves esteem in that time of use of the electrode to its efficiency is maximum. The temperatures of the electrodes were in the dependence of that curves showing a maximum temperature when the tension was maximum, yet the measured temperatures in the samples showed to be sensitive the variation of the temperature in the electrodes. An accompaniment of the loss of mass of the electrode relating to its time of use showed that the electrodes that appeared the spherical cavities lost more mass in comparison with the electrodes in that didn't appear. That phenomenon is only seen for pressures of 10-2 mbar, in these conditions a plasma column is formed inside of the channel of the gas and in certain points it is concentrated in form of spheres. Those spherical cavities develop inside of the channel of the gas spreading during the whole extension of the channel of the gas. The used electrodes were cut after they could not be more used, however among those electrodes, films that were deposited in alternate times and the electrodes that were used to deposit films in same times, those films were deposited in the glass substrata, alumina, stainless steel 420, stainless steel 316, silício and steel M2. As the eletros used to deposit films in alternate time as the ones that they were used to deposit in same times, the behavior of the thickness of the film obeyed the curve of the tension with relationship the time of use of the electrode, that is, when the tension was maximum, the thickness of the film was also maximum and when the tension was minimum, the thickness was minimum and in the case where the value of the tension was constant, the thickness of the film tends to be constant. The fine films that were produced they had applications with nano stick, bio-compatibility, cellular growth, inhibition of bacterias, cut tool, metallic leagues, brasagem, pineapple fiber and ornamental. In those films it was investigated the thickness, the adherence and the uniformity characterized by sweeping electronic microscopy. Another technique developed to assist the production and characterization of the films produced in that work was the caloteste. It uses a sphere and abrasive to mark the sample with a cap impression, with that cap form it is possible to calculate the thickness of the film. Through the time of life of the cathode, it was possible to evaluate the rate of waste of its material for the different work conditions. Values of waste rate up to 3,2 x 10-6 g/s were verified. For a distance of the substratum of 11 mm, the deposited film was limited to a circular area of 22 mm diameter mm for high pressures and a circular area of 75 mm for pressure strip. The obtained films presented thickness around 2,1 µm, showing that the discharge of arch of hollow cathode in argon obeys a curve characteristic of the tension with the time of life of the eletrodo. The deposition rate obtained in this system it is of approximately 0,18 µm/min