Optimal slopes and speeds in uphill ski mountaineering: a laboratory study.

The purpose of this study was to estimate the energy cost of linear (EC) and vertical displacement (ECvert), mechanical efficiency and main stride parameters during simulated ski mountaineering at different speeds and gradients, to identify an optimal speed and gradient that maximizes performance. 12 subjects roller skied on a treadmill at three different inclines (10, 17 and 24 %) at three different speeds (approximately 70, 80 and 85 % of estimated peak heart rate). Energy expenditure was calculated by indirect calorimetry, while biomechanical parameters were measured with an inertial sensor-based system. At 10 % there was no significant change with speed in EC, ECvert and mechanical efficiency. At 17 and 24 % the fastest speed was significantly more economical. There was a significant effect of gradient on EC, ECvert and mechanical efficiency. The most economical gradient was the steepest one. There was a significant increase of stride frequency with speed. At steep gradients only, relative thrust phase duration decreased significantly, while stride length increased significantly with speed. There was a significant effect of gradient on stride length (decrease with steepness) and relative thrust phase duration (increase with steepness). A combination of a decreased relative thrust phase duration with increased stride length and frequency decreases ECvert. To minimize the energy expenditure to reach the top of a mountain and to optimize performance, ski-mountaineers should choose a steep gradient (~24 %) and, provided they possess sufficient metabolic scope, combine it with a fast speed (~6 km h(-1)).

Estimation des facteurs de risque de la progression de la scoliose idiopathique de l’adolescence

Cette étude a pour but de tester si l’ajout de variables biomécaniques, telles que celles associées à la morphologie, la posture et l’équilibre, permet d’améliorer l’efficacité à dissocier 29 sujets ayant une scoliose progressive de 45 sujets ayant une scoliose non progressive. Dans une étude rétrospective, un groupe d’apprentissage (Cobb: 27,1±10,6°) a été utilisé avec cinq modèles faisant intervenir des variables cliniques, morphologiques, posturales et d’équilibre et la progression de la scoliose. Un groupe test (Cobb: 14,2±8,3°) a ensuite servit à évaluer les modèles dans une étude prospective. Afin d’établir l’efficacité de l’ajout de variables biomécaniques, le modèle de Lonstein et Carlson (1984) a été utilisé à titre d’étalon de mesures. Le groupe d’apprentissage a été utilisé pour développer quatre modèles de classification. Le modèle sans réduction fut composé de 35 variables tirées de la littérature. Dans le modèle avec réduction, une ANCOVA a servit de méthode de réduction pour passer de 35 à 8 variables et l’analyse par composantes principales a été utilisée pour passer de 35 à 7 variables. Le modèle expert fut composé de huit variables sélectionnées d’après l’expérience clinque. L’analyse discriminante, la régression logistique et l’analyse par composantes principales ont été appliquées afin de classer les sujets comme progressifs ou non progressifs. La régression logistique utilisée avec le modèle sans réduction a présenté l’efficience la plus élevée (0,94), tandis que l’analyse discriminante utilisée avec le modèle expert a montré l’efficience la plus faible (0,87). Ces résultats montrent un lien direct entre un ensemble de paramètres cliniques et biomécaniques et la progression de la scoliose idiopathique. Le groupe test a été utilisé pour appliquer les modèles développés à partir du groupe d’apprentissage. L’efficience la plus élevée (0,89) fut obtenue en utilisant l’analyse discriminante et la régression logistique avec le modèle sans réduction, alors que la plus faible (0,78) fut obtenue en utilisant le modèle de Lonstein et Carlson (1984). Ces valeurs permettent d’avancer que l’ajout de variables biomécaniques aux données cliniques améliore l’efficacité de la dissociation entre des sujets scoliotiques progressifs et non progressifs. Afin de vérifier la précision des modèles, les aires sous les courbes ROC ont été calculées. L’aire sous la courbe ROC la plus importante (0,93) fut obtenue avec l’analyse discriminante utilisée avec le modèle sans réduction, tandis que la plus faible (0,63) fut obtenue avec le modèle de Lonstein et Carlson (1984). Le modèle de Lonstein et Carlson (1984) n’a pu séparer les cas positifs des cas négatifs avec autant de précision que les modèles biomécaniques. L’ajout de variables biomécaniques aux données cliniques a permit d’améliorer l’efficacité de la dissociation entre des sujets scoliotiques progressifs et non progressifs. Ces résultats permettent d’avancer qu’il existe d’autres facteurs que les paramètres cliniques pour identifier les patients à risque de progresser. Une approche basée sur plusieurs types de paramètres tient compte de la nature multifactorielle de la scoliose idiopathique et s’avère probablement mieux adaptée pour en prédire la progression.

Percepção de distância em crianças durante a locomoção

O objetivo do presente estudo foi investigar a percepção de crianças sobre distância na ausência de informação visual durante a locomoção. Ainda, se parâmetros biomecânicos relativos à locomoção são alterados durante a locomoção nas diferentes distâncias. Sete crianças na idade de 6 anos (GC) e 10 adultos (GA) foram convidados a andar vendados até alvos pré-estabelecidos. O expoente da função de potência e parâmetros biomecânicos (Ex.: duração da passada, proporção da passada e velocidade da passada) foram obtidos para cada grupo. Diferenças foram encontradas somente para os valores de distância produzida ao longo das distâncias testadas. Nenhum dos parâmetros biomecânicos diferiu entre GC e GA. Alterações quantitativas foram observadas nos parâmetros biomecânicos para distâncias curtas, embora o padrão do movimento não tenha sido alterado. Crianças desta faixa etária demonstram, em tarefas não usuais (Ex.: locomoção sem visão), adaptabilidade e capacidade de orientar-se no espaço utilizando apenas da sensibilidade háptica e provavelmente da imagem mental-construída da observação feita antes da realização da tarefa sem informação visual.

Motor readiness and joint torque production in lower limbs of older women fallers and non-fallers

This study aimed to evaluate the motor response time and ability to develop joint torque at the knee and ankle in older women with and without a history of falls, in addition to investigating the effect of aging on these capacities. We assessed 18 young females, 21 older female fallers and 22 older female non-fallers. The peak torque, rate of torque development, rate of electromyography (EMG) rise, reaction time, premotor time and motor time were obtained through a dynamometric assessment and simultaneous electromyography. Surface EMGs of the rectus femoris (RF), vastus lateralis (VL), biceps femoris (BF), gastrocnemius lateralis (GL) and tibialis anterior (TA) muscles were recorded. Knee extension and flexion peak torques were lower in older fallers than in non-fallers. Knee extension and flexion and ankle plantarflexion and dorsiflexion peak torques were lower in both older groups than in the younger group. The rate of EMG rise of the BF and the motor time of the TA were lower and higher, respectively, in older fallers than in the younger adults. The time to reach peak torque in knee extension/flexion and ankle plantarflexion/dorsiflexion and the motor times of the RF, VL, BF and GL were higher in both older groups than in the younger groups. The motor time of the TA during ankle dorsiflexion and the knee extension peak torque were the major predictors of falls in older women, accounting for approximately 28% of the number of falls. Thus, these results further reveal the biomechanical parameters that affect the risk of falls and provide initial findings to support the prescription of exercises in fall prevention programs. © 2013 Elsevier Ltd.

Instrumentação biomecânica aplicada à análise do desempenho do chute em jogadores de futebol de campo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise das alterações biomecânicas durante a saída de velocidade através de um sistema de medidas com plataformas de forças em crianças praticantes e não praticantes de futebol de campo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do potencial osteogênico de células estromais derivadas da medula óssea de ratas adultas e senis submetidas ou não ao treinamento de força

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuição dos parâmetros biomecânicos para o desempenho de saltos verticais de jogadoras de basquetebol

O objetivo do presente estudo foi investigar a contribuição dos parâmetros biomecânicos para o desempenho do salto vertical com contramovimento (SV) e SV precedido de corrida (SVcorrida) em 19 jogadoras da seleção brasileira adulta de basquetebol feminino (26,2 ± 4,7 anos; 1,81 ± 0,07 m; 75,6 ± 12,6 kg; 20,4 ± 6,0% de gordura). Foram considerados os picos de força passiva (PFPa) e propulsão (PFP), tempo para alcance dos picos de força passiva (TPFPa) e propulsão (TPFP), "load rate" (LR), taxa de desenvolvimento de força (TDF), tempo de fase excêntrica (Texc) e concêntrica (Tcon). A análise de componentes principais revelou que 50,86% da altura de SV foi explicada por PFPa, TPFPa, LR, Texc e TPFP, e que 43,28% de SVcorrida foi explicada por PFPa, TPFPa, LR, PFP. Esses resultados sugerem que parâmetros temporais parecem contribuir de maneira mais significativa para o desempenho de salto, porém diferentes tipos de salto podem demandar comportamentos distintos de parâmetros biomecânicos.

Relationships between running economy and mechanics in middle-distance runners

Running economy (RE), i.e. the oxygen consumption at a given submaximal speed, is an important determinant of endurance running performance. So far, investigators have widely attempted to individuate the factors affecting RE in competitive athletes, focusing mainly on the relationships between RE and running biomechanics. However, the current results are inconsistent and a clear mechanical profile of an economic runner has not been yet established. The present work aimed to better understand how the running technique influences RE in sub-elite middle-distance runners by investigating the biomechanical parameters acting on RE and the underlying mechanisms. Special emphasis was given to accounting for intra-individual variability in RE at different speeds and to assessing track running rather than treadmill running. In Study One, a factor analysis was used to reduce the 30 considered mechanical parameters to few global descriptors of the running mechanics. Then, a biomechanical comparison between economic and non economic runners and a multiple regression analysis (with RE as criterion variable and mechanical indices as independent variables) were performed. It was found that a better RE was associated to higher knee and ankle flexion in the support phase, and that the combination of seven individuated mechanical measures explains ∼72% of the variability in RE. In Study Two, a mathematical model predicting RE a priori from the rate of force production, originally developed and used in the field of comparative biology, was adapted and tested in competitive athletes. The model showed a very good fit (R2=0.86). In conclusion, the results of this dissertation suggest that the very complex interrelationships among the mechanical parameters affecting RE may be successfully dealt with through multivariate statistical analyses and the application of theoretical mathematical models. Thanks to these results, coaches are provided with useful tools to assess the biomechanical profile of their athletes. Thus, individual weaknesses in the running technique may be identified and removed, with the ultimate goal to improve RE.

Studio retrospettico sul ruolo della strumentazione nei fallimenti meccanici a seguito di Trattamento Chirurgico nelle Scoliosi dell'adulto

The spinal column performs important functions in the body, including the support of the entire weight of the human body, the ability to orientate the head in space, bending, flexing and rotating the body. Diseases affecting the spine are manifold: the most frequent is scoliosis, which often affects the female population. It is often treated surgically with a very high percentage of failures. The aim of the thesis is to study the role of instrumentation in mechanical failures encountered 12 months after surgery in the treatment of scoliosis. For the purposes of the study, we analyzed specific biomechanical parameters. The pelvic angles determine the position of the pelvis, while the imbalance parameters the structure of the body. We infer other parameters by analyzing the characteristics of the implanted instrumentation. Initially, the anatomy is described of the spine and vertebrae, the equipment used and the possible failures that may occur after surgery. Subsequently, the materials and methods used for the analysis of the above-mentioned parameters for the 61 patients are reported. All data are obtained by the observation of pre and post-operative x-rays with a special program, by reading reports from operators and by medical records. In the fourth chapter, we report the results: the overall failure rate is 60.9%; the types of failures that occurred are rupture of bars and rupture of bars simultaneously to PJK. The most influential parameters on results of the progress of the surgery are the type of material used and the BMI. It is estimated a high percentage of failures in patients treated with implants of cobalt chromium alloys (90.0%). According to the results obtained, it is possible to understand the aspects that in the future should be studied, in order to find a solution to the most frequent surgical failures.

[Elbow dysplasia in the dog: finite element analysis]

For young active dogs of large, fast-growing breeds, diseases of the elbow represent an increasing important disorder. Genetic predisposition, overweight and joint overload have been proposed as possible causes of elbow dysplasia. In this study, the influence of various biomechanical parameters on load transfer in healthy and pathological dog elbows has been analysed by means of a two-dimensional finite element model. Pathological changes in the elbow structure, such as altered material properties or asynchronous bone growth, have a distinct influence on the contact pressure in the joint articulation, internal bone deformation and stresses in the bones. The results obtained support empirical observations made during years of experience and offer explanations for clinical findings that are not yet well understood.

Surgical instrumentation for the in vivo determination of lumbar spinal segment stiffness and viscoelasticity

The definition of spinal instability is still controversial. For this reason, it is essential to better understand the difference in biomechanical behaviour between healthy and degenerated human spinal segments in vivo. A novel computer-assisted instrument was developed with the objective to characterize the biomechanical parameters of the spinal segment. Investigation of the viscoelastic properties as well as the dynamic spinal stiffness was performed during a minimally invasive procedure (microdiscectomy) on five patients. Measurements were performed intraoperatively and the protocol consisted of a dynamic part, where spinal stiffness was computed, and a static part, where force relaxation of the segment under constant elongation was studied. The repeatability of the measurement procedure was demonstrated with five replicated tests. The spinal segment tissues were found to have viscoelastic properties. Preliminary tests confirmed a decrease in stiffness after decompression surgery. Patients with non-relaxed muscles showed higher stiffness and relaxation rate compared to patients with relaxed muscles, which can be explained by the contraction and relaxation reflex of muscles under fast and then static elongation. The results show the usefulness of the biomechanical characterization of the human lumbar spinal segment to improve the understanding of the contribution of individual anatomical structures to spinal stability.

Finite element analysis in asymptomatic, symptomatic, and ruptured abdominal aortic aneurysms: in search of new rupture risk predictors.

OBJECTIVES To compare biomechanical rupture risk parameters of asymptomatic, symptomatic and ruptured abdominal aortic aneurysms (AAA) using finite element analysis (FEA). STUDY DESIGN Retrospective biomechanical single center analysis of asymptomatic, symptomatic, and ruptured AAAs. Comparison of biomechanical parameters from FEA. MATERIALS AND METHODS From 2011 to 2013 computed tomography angiography (CTA) data from 30 asymptomatic, 15 symptomatic, and 15 ruptured AAAs were collected consecutively. FEA was performed according to the successive steps of AAA vessel reconstruction, segmentation and finite element computation. Biomechanical parameters Peak Wall Rupture Risk Index (PWRI), Peak Wall Stress (PWS), and Rupture Risk Equivalent Diameter (RRED) were compared among the three subgroups. RESULTS PWRI differentiated between asymptomatic and symptomatic AAAs (p < .0004) better than PWS (p < .1453). PWRI-dependent RRED was higher in the symptomatic subgroup compared with the asymptomatic subgroup (p < .0004). Maximum AAA external diameters were comparable between the two groups (p < .1355). Ruptured AAAs showed the highest values for external diameter, total intraluminal thrombus volume, PWS, RRED, and PWRI compared with asymptomatic and symptomatic AAAs. In contrast with symptomatic and ruptured AAAs, none of the asymptomatic patients had a PWRI value >1.0. This threshold value might identify patients at imminent risk of rupture. CONCLUSIONS From different FEA derived parameters, PWRI distinguishes most precisely between asymptomatic and symptomatic AAAs. If elevated, this value may represent a negative prognostic factor for asymptomatic AAAs.

BioMet®Tools: from modeling and simulation to product design and development

BioMet®Tools is a set of software applications developed for the biometrical characterization of voice in different fields as voice quality evaluation in laryngology, speech therapy and rehabilitation, education of the singing voice, forensic voice analysis in court, emotional detection in voice, secure access to facilities and services, etc. Initially it was conceived as plain research code to estimate the glottal source from voice and obtain the biomechanical parameters of the vocal folds from the spectral density of the estimate. This code grew to what is now the Glottex®Engine package (G®E). Further demands from users in medical and forensic fields instantiated the development of different Graphic User Interfaces (GUI’s) to encapsulate user interaction with the G®E. This required the personalized design of different GUI’s handling the same G®E. In this way development costs and time could be saved. The development model is described in detail leading to commercial production and distribution. Study cases from its application to the field of laryngology and speech therapy are given and discussed.

BioMet®Phon: A system to monitor phonation quality in the clinics

BioMet®Phon is a software application developed for the characterization of voice in voice quality evaluation. Initially it was conceived as plain research code to estimate the glottal source from voice and obtain the biomechanical parameters of the vocal folds from the spectral density of the estimate. This code grew to what is now the Glottex®Engine package (G®E). Further demands from users in laryngology and speech therapy fields instantiated the development of a specific Graphic User Interface (GUI’s) to encapsulate user interaction with the G®E. This gave place to BioMet®Phon, an application which extracts the glottal source from voice and offers a complete parameterization of this signal, including distortion, cepstral, spectral, biomechanical, time domain, contact and tremor parameters. The semantic capabilities of biomechanical parameters are discussed. Study cases from its application to the field of laryngology and speech therapy are given and discussed. Validation results in voice pathology detection are also presented. Applications to laryngology, speech therapy, and monitoring neurological deterioration in the elder are proposed.