K-T transition in Deccan Traps of central India marks major marine Seaway across India

Deccan intertrappean sediments in central India are generally considered as terrestrial deposits of Maastrichtian age, but the Cretaceous-Tertiary (K-T) position is still unknown. Here we report the discovery of the K-T transition, a marine incursion and environmental changes preserved within the intertrappean sediments at Jhilmili, Chhindwara District, Madhya Pradesh. Integrative biostratigraphic, sedimentologic, mineralogic and chemostratigraphic analyses reveal the basal Danian in the intertrappean sediments between lower and upper trap basalts that regionally correspond to C29r and the C29R/C29N transition, respectively. Intertrappean deposition occurred in predominantly terrestrial semi-humid to and environments. But a short aquatic interval of fresh water ponds and lakes followed by shallow coastal marine conditions with brackish marine ostracods and early Danian zone P1a planktic foraminifera mark this interval very close to the K-T boundary. This marine incursion marks the existence of a nearby seaway, probably extending inland from the west through the Narmada and Tapti rift valleys. The Jhilmili results thus identify the K-T boundary near the end of the main phase of Deccan eruptions and indicate that a major seaway extended at least 800 km across India. (C) 2009 Elsevier B.V. All rights reserved.

Evaluation Gives STAR High Marks, Data Download, Iowa Department of Corrections, February 2010

The Division of Criminal and Juvenile Justice Planning (CJJP) recently released an evaluation of the intensive substance abuse treatment program at the Iowa Correctional Institution for Women (ICIW) – STAR (Sisters Together Achieving Recovery). STAR is a licensed inpatient program utilizing a genderbased therapeutic community model (TC).

CD103 marks a subset of human CD34(+)-derived langerin(+) dendritic cells that induce T-regulatory cells via indoleamine 2,3-dioxygenase-1.

Indoleamine 2,3-dioxygenase 1 (IDO1) is an immunosuppressive molecule expressed in some subsets of normal and neoplastic cells. Mature human dendritic cells (DCs) have been shown to express IDO1, but little is known about its expression and function during DC differentiation from bone marrow hematopoietic stem/progenitor cells (HSPCs). Here, we show that during in vitro differentiation along the myeloid DC lineage, CD34(+) HSPCs acquire IDO1 expression, which acts in a tolerogenic manner by inducing a population of fully functional CD4(+)CD25(+) FOXP3(+) T-regulatory cells. Phenotypically, CD1a(+)CD14(-) HPSC-derived DCs expressed IDO1, langerin, CD11b, and CD1c. Cell-sorting experiments demonstrated that IDO1 expression is found in a subset of CD1a(+)CD14(-)langerin(+) cells, expressing CD103, which is capable of inducing T-regulatory cells in an IDO1-dependent manner. In conclusion, DC differentiation from CD34(+) HSPCs results in the expression of a functionally active IDO1 protein in CD1a(+)langerin(+), CD103-expressing DCs. These data point toward IDO1 expression as part of a tolerogenic signature during DC development.

Marks of Fire, Value and Faith. Swords with Ferrous Inlays in Finland during the Late Iron Age (ca. 700–1200 AD)

This study explores swords with ferrous inlays found in Finland and dating from the late Iron Age, ca. 700–1200 AD. These swords reflect profound changes not only in styles and fashion but also in the technology of hilts and blades. This study explores how many of these kinds of swords are known from Finland, how they were made and where, what their status was in Late Iron Age Finland, and where the Finnish finds stand in accordance with other areas of Europe. The various methods included measuring of the finds and statistics. The main method of revealing the inlaid marks was radiography due to its non-destructive nature. In cases where inlays were visible without radiography, their details were inspected via microscopy. To study the materials and manufacture of inlaid swords, a sample of them was metallographically analysed to determine the forging technologies and nature of used materials. Furthermore, the manufacture was also studied with experimental approaches. As a result, a catalogue of 151 swords with ferrous inlays was created. This number is relatively high compared with other European countries, although systematic studies have been conducted in only some countries. The inlaid motifs were classified into five distinct categories to help the classification. To summarize, almost every documented inlaid sword was unique in some respect including measurements, inlaid motifs and materials of blades and inlays. Technological variation was also present, some blades being poorer and some of higher quality in spite of the inlaid motifs. Misspelt inscriptions as well as letter-like marks were common in Finland and also in Scandinavia. Furthermore, the provenance of iron and steel used in some blades hints at Scandinavian ores. The above observations, along with the experimental results indicating the existence of multiple alternative techniques of inlaying, suggest that these swords were manufactured locally in Scandinavia, most likely in imitation of Continental European models. Inlaid swords were valued partly for their assumed functionality in combat, as evidenced by damage on some examined blades, or they were valued for their inlays, which could have had fashionable or symbolical meanings bound to local beliefs.

Beak trimming reduces feeding efficiency of hens

The ability of beak-trimmed and intact laying hens to ingest feed pellets was examined by highspeed video filming of feeding birds. The birds were exposed to either a deep layer of pellets or a single layer of pellets. In the single layer treatment, there was a negative correlation between mandible asymmetry and feeding success. These data have important implications for poultry welfare, since the degree of bill asymmetry caused by beak trimming may, under certain circumstances, result in inadvertent feed deprivation.

Scorch marks from the sky

Daily sunshine duration is commonly reported at weather stations. Beyond the basic duration report, more information is available from scorched cards of Campbell-Stokes sunshine recorders, such as the estimation of direct-beam solar irradiance. Sunshine cards therefore potentially provide information on sky state, as inferred from solar-radiation data. Some sites have been operational since the late 19th century, hence sunshine cards potentially provide underexploited historical data on sky state. Sunshine cards provide an example of an archive source yielding data beyond the measurements originally sought.

Marks, spaces and boundaries

Dictionary compilers and designers use punctuation to structure and clarify entries and to encode information. Dictionaries with a relatively simple structure can have simple typography, and simple punctuation; as dictionaries grew more complex, and encountered the space constraints of the printed page, complex encoding systems were developed, using punctuation and symbols. Two recent trends have emerged in dictionary design: to eliminate punctuation, and sometimes to use a larger number of fonts, so that the boundaries between elements are indicated by font change, not punctuation.

Registering scents as community trade marks

While the registrability of scents as Community trade marks has become source of much controversy, the possibility of trademarking scents represents a great potential for the industry. In the aftermath of the Sieckmann case, which has raised the threshold of registrability for scent marks, companies have refrained from submitting new smell-mark applications. Despite the difficulties in registering scents as trademarks, however, it is not impossible to meet the Sieckmann criteria and file successful scent mark applications. This article explains how this could be possible; it reviews all objections in registering scents as trademarks and brings new light into this topic by way of a comprehensive analysis of the conditions under which scents can be registered as Community trade marks.

K-T transition in Deccan traps of central India marks major marine seaway across India.

Deccan intertrappean sediments in central India are generally considered as terrestrial deposits of Maastrichtian age, but the Cretaceous–Tertiary (K–T) position is still unknown. Here we report the discovery of the K–T transition, a marine incursion and environmental changes preserved within the intertrappean sediments at Jhilmili, Chhindwara District, Madhya Pradesh. Integrative biostratigraphic, sedimentologic, mineralogic and chemostratigraphic analyses reveal the basal Danian in the intertrappean sediments between lower and upper trap basalts that regionally correspond to C29r and the C29R/C29N transition, respectively. Intertrappean deposition occurred in predominantly terrestrial semi-humid to arid environments. But a short aquatic interval of fresh water ponds and lakes followed by shallow coastal marine conditions with brackish marine ostracods and early Danian zone P1a planktic foraminifera mark this interval very close to the K–T boundary. This marine incursion marks the existence of a nearby seaway, probably extending inland from the west through the Narmada and Tapti rift valleys. The Jhilmili results thus identify the K–T boundary near the end of the main phase of Deccan eruptions and indicate that a major seaway extended at least 800 km across India.

Barriers to “industrialisation” for interwar British retailing? The case of Marks & Spencer Ltd.

Research on international differences in retail productivity has highlighted formidable environmental barriers to the ‘industrialisation’ of mass retailing as a driver of declining British interwar productivity growth in this sector (and in services more generally). We examine evidence for such barriers, using a case study of a firm that built its interwar expansion strategy on ‘American’ retail methods – Marks & Spencer (M&S). We find that, rather than facing barriers to the adoption of American mass retail practices, M&S reaped major productivity gains from this process. This adds further evidence to an emerging literature rejecting the barriers to industrialisation thesis for retailing.

Real time video segmentation for recognising paint marks on bad wooden railway sleepers

Wooden railway sleeper inspections in Sweden are currently performed manually by a human operator; such inspections are based on visual analysis. Machine vision based approach has been done to emulate the visual abilities of human operator to enable automation of the process. Through this process bad sleepers are identified, and a spot is marked on it with specific color (blue in the current case) on the rail so that the maintenance operators are able to identify the spot and replace the sleeper. The motive of this thesis is to help the operators to identify those sleepers which are marked by color (spots), using an “Intelligent Vehicle” which is capable of running on the track. Capturing video while running on the track and segmenting the object of interest (spot) through this vehicle; we can automate this work and minimize the human intuitions. The video acquisition process depends on camera position and source light to obtain fine brightness in acquisition, we have tested 4 different types of combinations (camera position and source light) here to record the video and test the validity of proposed method. A sequence of real time rail frames are extracted from these videos and further processing (depending upon the data acquisition process) is done to identify the spots. After identification of spot each frame is divided in to 9 regions to know the particular region where the spot lies to avoid overlapping with noise, and so on. The proposed method will generate the information regarding in which region the spot lies, based on nine regions in each frame. From the generated results we have made some classification regarding data collection techniques, efficiency, time and speed. In this report, extensive experiments using image sequences from particular camera are reported and the experiments were done using intelligent vehicle as well as test vehicle and the results shows that we have achieved 95% success in identifying the spots when we use video as it is, in other method were we can skip some frames in pre-processing to increase the speed of video but the segmentation results we reduced to 85% and the time was very less compared to previous one. This shows the validity of proposed method in identification of spots lying on wooden railway sleepers where we can compromise between time and efficiency to get the desired result.

Morphology of beak and tongue of partrigde Rhynchotus rufescens

Vinte perdizes Rhynchotus rufescens foram utilizadas para estudar a morfologia do bico e da língua. Os comprimentos do bico e da língua foram avaliados, e secções histológicas foram coradas com Hematoxilina-Eosina (HE), ácido periódico de Schiff (PAS) e tricromo de Masson, posteriormente analisadas e descritas. O bico da perdiz em ambos os sexos são curvos, duros e com uma extremidade pontiaguda tendo em média de 4,90cm de comprimento para as fêmeas e 4,80 para os machos. A língua é caracterizada por um formato triangular e possui em média 1cm de comprimento para ambos os sexos, sendo sua extremidade pontiaguda. A organização histológica da língua apresenta epitélio estratificado queratinizado com papilas filiformes em toda a superfície, glândulas mucosas com ductos que se projetam na superfície epitelial e cartilagem hialina em todo o comprimento, localizada sobre a musculatura esquelética, a qual é orientada em várias direções.

Beak trimming methods and their effect on the performance and egg quality of Japanese quails (Coturnix japonica) during lay

A total number of 720 Japanese quail females, reared under identical management conditions, and receiving feed and water ad libitum, was used. Quails were housed and reared from 1-35 days of age in litter pens in a rearing house, and then were transferred to a quail layer house. This study aimed at verifying if different beak trimming method could optimize egg production and quality by reducing stress and cannibalism among birds. A completely randomized experimental design was used, with six treatments in a 2x3 factorial arrangement, with two beak trimming ages (14 and 21 days) and three beak trimming variants (non-trimmed, 1/3 of the beak trimmed, or 1/2 of the beak trimmed), 6 replicates of 20 birds each. Performance was evaluated by feed intake, percentage of lay, egg mass, feed conversion ratio per dozen and per kg eggs, and mortality. Performance was influenced by trimming variant, with the best results obtained by birds with intact and those with 1/3 of the beak trimmed. Better specific gravity was in quails submitted to beak trimming at 21 days of age, whereas other egg quality parameters did not present significant results. Based the results obtained in the present study, it is recommended to submit to beak trimming either at 14 or 21 days of age.

Beak-trimming methods and their effect on the performance of japanese quail pullets (Coturnix japonica)

This study aimed at verifying if beak-trimming methods in Japanese quail pullets could optimize production by decreasing stress caused by cannibalism. A total number of 816 day-old Japanese quails was distributed in a completely randomized experimental design in a 2 x 3 factorial arrangement, with two beak-trimming ages (14 and 21 days of age) and three beak-trimming sizes (not trimmed, 1/3 trimmed, or 1/2 trimmed), and 4 replicates of 34 birds per replicate. Birds were submitted to the same management and feeding conditions. Weight gain, feed intake, feed conversion ratio, and mortality were evaluated. There was no significant effect of age at beak trimming on the evaluated parameters (P>0.05), as well as no significant interaction between age at beak trimming, and beak-trimming method. There was a significant effect (P<0.01) of trimming size on performance, with the best performance observed in birds not submitted to beak trimming or had 1/2 of the beak trimmed. When the beak was more aggressively trimmed (1/2), parameters were worse. According to the obtained results, it is recommended to trim 1/3 of the beaks, which can be performed either at 14 or 21 days of age.