Fruits and vegetables:measuring intake and encouraging increased consumption

A high intake of fruit and vegetables (FV) is associated with reduced risk of chronic disease, although the evidence base is mostly observational. Blood biomarkers offer an objective indicator of FV intake, potentially improving estimates of intakes based on traditional methods. A valid biomarker of overall FV intake would be able to confirm population intakes, more precisely evaluate the association between intakes and health outcomes and confirm compliance in FV interventions. Several substances have been proposed as biomarkers of FV intake: vitamin C, the carotenoids and polyphenols. Certain biomarkers are strong predictors of single FV; however, the proposed single biomarkers of FV consumption are only modestly predictive of overall FV consumption. This is likely to be due to the complexity of the FV food group. While accurately measuring FV intake is important in nutrition research, another critical question is: how best can an increase in FV intake be achieved? Increased FV intake has been achieved in efficacy studies using intensive dietary advice. Alternative, less intensive methods for encouraging FV consumption need to be developed and tested for population level intervention. Systematic reviews suggest peer support to be an effective strategy to promote dietary change. This review will describe the evidence for a link between increased FV intake and good health, outline possible novel biomarkers of FV consumption, present the most recently available data on population intake of FV and examine the usefulness of different approaches to encourage increased consumption of FV.

Computational approaches to finding and measuring inconsistency in arbitrary knowledge bases

There is extensive theoretical work on measures of inconsistency for arbitrary formulae in knowledge bases. Many of these are defined in terms of the set of minimal inconsistent subsets (MISes) of the base. However, few have been implemented or experimentally evaluated to support their viability, since computing all MISes is intractable in the worst case. Fortunately, recent work on a related problem of minimal unsatisfiable sets of clauses (MUSes) offers a viable solution in many cases. In this paper, we begin by drawing connections between MISes and MUSes through algorithms based on a MUS generalization approach and a new optimized MUS transformation approach to finding MISes. We implement these algorithms, along with a selection of existing measures for flat and stratified knowledge bases, in a tool called mimus. We then carry out an extensive experimental evaluation of mimus using randomly generated arbitrary knowledge bases. We conclude that these measures are viable for many large and complex random instances. Moreover, they represent a practical and intuitive tool for inconsistency handling.

Experimental measuring procedure for the friction torque in rolling bearings

The reduction of the power loss generated in mechanical transmissions and the use of low friction biodegradable lubricants has been attracting considerable attention in recent times. Therefore, it is necessary to develop methods to test and evaluate the performance of such lubricants and compare them with conventional ones. In this sense, a Four-Ball Machine was modified allowing the test of rolling bearings. A 51107 thrust ball bearing was used to test two different greases and the corresponding base oils. Friction torque and operating temperatures were continuously monitored to quantify the power loss and the heat evacuation for each lubricant tested. Copyright © 2010 John Wiley & Sons, Ltd.

Comparaison des méthodes d'analyse de l'expression différentielle basée sur la dépendance des niveaux d'expression

La technologie des microarrays demeure à ce jour un outil important pour la mesure de l'expression génique. Au-delà de la technologie elle-même, l'analyse des données provenant des microarrays constitue un problème statistique complexe, ce qui explique la myriade de méthodes proposées pour le pré-traitement et en particulier, l'analyse de l'expression différentielle. Toutefois, l'absence de données de calibration ou de méthodologie de comparaison appropriée a empêché l'émergence d'un consensus quant aux méthodes d'analyse optimales. En conséquence, la décision de l'analyste de choisir telle méthode plutôt qu'une autre se fera la plupart du temps de façon subjective, en se basant par exemple sur la facilité d'utilisation, l'accès au logiciel ou la popularité. Ce mémoire présente une approche nouvelle au problème de la comparaison des méthodes d'analyse de l'expression différentielle. Plus de 800 pipelines d'analyse sont appliqués à plus d'une centaine d'expériences sur deux plateformes Affymetrix différentes. La performance de chacun des pipelines est évaluée en calculant le niveau moyen de co-régulation par l'entremise de scores d'enrichissements pour différentes collections de signatures moléculaires. L'approche comparative proposée repose donc sur un ensemble varié de données biologiques pertinentes, ne confond pas la reproductibilité avec l'exactitude et peut facilement être appliquée à de nouvelles méthodes. Parmi les méthodes testées, la supériorité de la sommarisation FARMS et de la statistique de l'expression différentielle TREAT est sans équivoque. De plus, les résultats obtenus quant à la statistique d'expression différentielle corroborent les conclusions d'autres études récentes à propos de l'importance de prendre en compte la grandeur du changement en plus de sa significativité statistique.

User-Centred Methods for Measuring the Value of Open Data

A project to identify metrics for assessing the quality of open data based on the needs of small voluntary sector organisations in the UK and India. For this project we assumed the purpose of open data metrics is to determine the value of a group of open datasets to a defined community of users. We adopted a much more user-centred approach than most open data research using small structured workshops to identify users’ key problems and then working from those problems to understand how open data can help address them and the key attributes of the data if it is to be successful. We then piloted different metrics that might be used to measure the presence of those attributes. The result was six metrics that we assessed for validity, reliability, discrimination, transferability and comparability. This user-centred approach to open data research highlighted some fundamental issues with expanding the use of open data from its enthusiast base.

Methodology for measuring the impact of mobile technology change from 2nd to 3th generation percerved by users of smes in Barranquilla

This article presents the results of a research project undertaken to obtain a Masters inBusiness Administration from the Business School at the Universidad del Norte, whosepurpose was to identify and test a methodology to measure the impact exerted by thechange from 2nd to 3rd generation mobile tech, based on the perception of users belongingto Barranquilla SME, motivated by the influence of technological changes in behavior andthe knowledge creation among society members, and the importance it has taken to thesurvival of organizations the adoption of applications for process automation, web-basedapplications, voice, data and video that allow the development of competitive advantages,based on information and creativity for new and better products or services.

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Caracterização física de substratos à base de serragem e recipientes para crescimento de mudas de cacaueiro

O objetivo deste trabalho foi realizar caracterização física e avaliar o efeito de substratos à base de serragem e dois recipientes no crescimento de mudas de cacaueiro. O delineamento experimental foi em blocos casualizados, em esquema fatorial 2 x 4 x 2. Os tratamentos foram obtidos da combinação de serragens originadas de dois locais: municípios de Una e Camacan, no Estado da Bahia, quatro proporções (v:v) de serragem e areia: 1:0; 8:1; 4:1 e 2:1 e dois recipientes de crescimento (tubetes de 288 cm³ e sacos de polietileno de 840 cm³). Antes do plantio, amostras dos substratos foram retiradas para análises físicas. Foram usadas miniestacas de 4 a 6 cm de comprimento do clone Trinidad Select Hybrid (TSH 1188). Inicialmente, as miniestacas foram tratadas na base com AIB 6.000 mg kg-1, em seguida foram inseridas em tubetes preenchidos com os substratos e mantidas em câmara de nebulização. Após quarenta dias, as miniestacas foram retiradas da câmara e transferidas para crescimento, em casa de vegetação, onde parte foi mantida nos respectivos tubetes e outra transplantada em sacos de polietileno de 840 cm³ preenchidos com os mesmos tratamentos. Após cinco meses, em casa de vegetação, as mudas foram avaliadas quanto à altura da planta, diâmetro do caule, massa da matéria seca da parte aérea e das raízes, número de folhas e área foliar das plantas. Na análise física dos substratos, verificou-se que a distribuição do tamanho de partículas foi diferenciada entre as serragens e a proporção de areia. As densidades seca, úmida e de partícula aumentaram, enquanto o teor de matéria orgânica e a porosidade total foram reduzidos pela adição de areia às serragens. O transplante de miniestacas enraizadas de cacaueiro, clone TSH 1188, para sacos com substrato preparado com serragem coletada no município de Una-BA, nas proporções serragem:areia 4:1 e 2:1, possibilitou maior crescimento das plantas, sendo,portanto, recomendados para produção de mudas.

Effect of cooling procedure on final denture base adaptation

Well-fitted dentures prevent hyperplasic lesions, provide chewing efficiency and promote patient's comfort. Several factors may affect final adaptation of dentures, as the type of the acrylic resin, the flask cooling procedure and the water uptake. This investigation evaluated the effect of water storage and two different cooling procedures [bench cooling (BC) for 2 h; running water (RW) at 20 degreesC for 45 min] on the final adaptation of denture bases. A heat-cured acrylic resin (CL, Classico, Classico Artigos Odontologicos) and two microwave-cured acrylic resins [Acron MC, (AC) GC Dent. Ind. Corp.; Onda Cryl (OC), Classico Artigos Odontologicos] were used to make the bases. Adaptation was assessed by measuring the weight of an intervening layer of silicone impression material between the base and the master die. Data was submitted to ANOVA and Tukey's test (0.05). The following means were found: (BC) CL=0.72 +/- 0.03 a; AC=0.70 +/- 0.03 b; OC=0.76 +/- 0.04 c//(RW) CL= 1.00 +/- 0.11 a; AC=1.00 +/- 0.12 a; OC=0.95 +/- 0.10 a. Different labels join groups that are not statistically different (P > 0.05). Comparisons are made among groups submitted to the same cooling procedure (BC or RW). The conclusions are: interaction of type of material and cooling procedure had a statistically significant effect on the final adaptation of the denture bases (P < 0.05); water storage was not detected as a source of variance (P > 0.05) on the final adaptation.

Desenvolvimento e teste de nanocatalisadores a base de Pd para a redução de oxigênio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desequilíbrio de ligação e associação entre polimorfismos de base única com maciez da carne e espessura de gordura em bovinos Nelore utilizando painéis de alta densidade

Pós-graduação em Genética e Melhoramento Animal - FCAV

Estudo da formação de espumas cerâmicas à base de zircônio a partir do processo sol-gel

Pós-graduação em Química - IQ

Caracterização de cerâmicas a base de nitreto de silício para aplicações estruturais

The need for development of new materials is a natural process in the companies’ technological point of view, seeking improvements in materials and processes. Specifically, among the materials, ceramic exhibit valuable properties, especially the covalent ceramics which have excellent properties for applications which requires the abrasion resistance, hardness, high temperatures, resistence, etc. being a material that has applications in several areas. Most studies are related to improvement of properties, specially fracture toughness that allows the expansion of its application. Among the most promising ceramic materials are silicon nitride (Si3N4) which has excellent properties. The goal of this work was the development and caracterization of Si3N4-based ceramics, doped with yttrium oxide (Y2O3), rar earth concentrate (CTR2O3) and cerium oxide (CeO2) in the same proportion for the evaluation of properties. The powders' mixtures were homogenized, dried and compressed under pressure uniaxial and isostatic. Sintering was carried out in 1850 ⁰C under pressure of 0,1MPa N2 for 1 h with a heating rate of 25 ⁰C / min and cooling in the furnace inertia. The characterizations were performed using Archimedes principle to relative density, weight loss by measuring before and after sintering, phase analysis by X-ray diffraction, microstructure by scanning electron microscope (SEM), hardness and fracture toughness by the method Vickers indentation. The results obtained showed relative density of 97-98%, Vickers hardness 17 to 19 GPa, fracture toughness 5.6 to 6.8 MPa.m1/2, with phases varying from α-SiAlON and β-Si3N4 depending the types of additives used. The results are promising for tribological applications and can be defined according to the types of additives to be used

Comparación de la conductancia hidráulica dentinaria, de acuerdo al tiempo de aplicación de desensibilizantes con base de oxalatos

ABSTRACT. Introduction: an in vitro model was used to measure the hydraulic conductance in human dentin discs treated with oxalic acid for 15, 30 or 60 s maintaining the occlusive effect and measuring 7 and 14 days after application. Methods: 45 dentin discs measuring 1 mm thick were obtained from human third molars which were free of caries and in no occlusion; the samples were obtained from patients aged 16 to 30 years. Discs were sorted out into three study groups (n = 15) depending on the time of application of a commercial solution of oxalate-based dentin desensitizer (DD) (BisBlock®) which contains ˂ 5% oxalic acid of 1.5-1.8 pH: in group A the agent was applied for 15 s, in group B it was applied for 30 s, and in group C for 60 s. The hydraulic conductance of each disc was calculated after acid etching, which corresponds to the maximum permeability of discs (100%) after immediate application of oxalic acid, as well as seven and fourteen days of storage in saline solution. The statistical analysis was done with ANOVA test and post-hoc Games-Howell test. Results: 35,46 ± 23.41% in Group A, 36.34 ± 15.88% in Group B and 24.99 ± 14.99% in Group C, showing that the use of DD for 15, 30 or 60 s decreased permeability in a statistically significant manner (p <0.05). Conclusions: DD was effective in reducing hydraulic conductance regardless of application time, but this reduction was temporary only, since after seven days permeability returns to values close to those of baseline.

Ferramenta computacional para identificação de micro-organismos com base em assinaturas genômicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)