Behavior of Socket Base Connections Emphasizing Pedestal Walls

To evaluate the main design models for socket base connections of precast concrete structures, an experimental investigation was carried out on specimens of this connection with smooth and rough interfaces in contact with cast-in-place concrete. The specimens consisted of pedestal walls and were submitted to loads with large eccentricities. Based on the experimental results, two rational design models are proposed for this connection. One of these models accounts for the friction and is applied to socket bases with smooth interfaces. The main behavior model was verified for sockets with this type of interface and the design of the longitudinal walls as corbels is also suggested in this case. Because the behavior of the rough interface specimens was very close to a monolithic connection, the other proposed model is an adaptation of the bending theory to calculate the vertical reinforcement of socket bases with rough interfaces.

Analysis of the behavior of transverse walls of socket base connections

This paper presents a theoretical and experimental analysis of socket base connections of precast concrete structures with regard to the behavior of transverse walls. The experimental program included seven specimens, for which the type of interface in contact with cast-in-place concrete, the load eccentricities and the embedded lengths were all varied, A design model was proposed to calculate the reinforcements of the transverse walls. Based on the obtained results, some conclusions can be drawn: (a) The top of the transverse wall on the compression side of the smooth connections and the top of the two transverse walls of the rough connections are submitted to a bending-tension and this tension prevails on the bending; (b) The design model proposed for the calculation of the reinforcement of the transverse wall on the compression side provides the best prediction of the experimental results for all specimens when compared to the current design models; (c) For rough interfaces, the top of the transverse wall on the tension side is more requested than the top of transverse wall on the compression side; (d) The results of the proposed design model for the reinforcement of the transverse wall on the tension side of rough connections were in close agreement with the experimental results. (C) 2008 Elsevier Ltd. All rights reserved.

Sensor element for a metal-insulator-semiconductor camera system (MISCam)

We discuss the operation of a new type of optical sensor (MISCam) based on a metal-insulator-semiconductor (MIS) structure. The operation principle relies on light-induced changes of the band bending and barrier height at the interface between semiconductor and insulator. An image is obtained from the quenching of the ac signal in analogy to the principle of the laser-scanned photodiode (LSP). Lateral resolution depends on the semiconductor material chosen. We have characterised the MIS structures by C-V, I-V, and spectral response measurements testing different types of insulators like a-Si3N4, SiO2, and AlN. The presence of slow interface charges allows for image memory. Colour sensors can be realised by controlling sign and magnitude of the electric fields in the base and the interface region.

Evaluation des informations préopératoires et du consentement signé en chirurgie pédiatrique

1. Abstract Au XXème siècle la médecine a passablement évolué et la question de l'implication du patient dans le processus de décision thérapeutique devient petit à petit une nécessité. La théorie du consentement éclairé apparaît en Suisse à la fin des années 70 et l'information du patient devient un thème incontournable. C'est dans cette perspective que le formulaire de consentement vient progressivement s'imposer. Dans la première partie de ce travail, nous avons cherché à mettre en évidence qu'elles pouvaient être les directives éthiques et juridiques en matière de formulaire de consentement en vue d'une intervention chirurgicale. Pour que ce formulaire soit validé, il doit être accompagné d'une information claire et appropriée afin obtenir un consentement libre et éclairé du patient tant du point de vue éthique que juridique. Dans la deuxième partie, nous nous sommes intéressés à l'usage et l'utilisation du formulaire de consentement employé au sein du service de chirurgie pédiatrique au CHUV et à l'HEL. Afin d'en avoir un bon reflet, nous avons soumis un questionnaire à des chirurgiens cadres ou chefs de cliniques du service de chirurgie pédiatrique. Ce questionnaire se base sur des questions soulevées par la littérature traitant du sujet ainsi que sur l'article 21 de la loi sur la Santé publique du canton de Vaud qui dit, en résumé, que le minimum requis est le droit à l'information afin de donner valablement un consentement. Il est composé de trois parties. Dans la première partie, il en ressort qu'en règle générale les chirurgiens s'accordent sur la définition du formulaire de consentement. Ils sont dans l'ensemble satisfaits du formulaire en vigueur et n'en modifieraient pas la structure. Dans la deuxième partie, la signature du formulaire est vue comme une obligation mais la raison de cette obligation n'a pas la même signification pour chacun et les avis divergent quant il s'agit de savoir qui cela protège. Dans la troisième partie, ils s'accordent tous sur le contenu de l'information jugé nécessaire à donner aux parents des futurs opérés. En conclusion, les chirurgiens pédiatres semblent globalement satisfaits du formulaire actuel et peu le modifieraient. Nous trouvons important de mentionner que peu soulèvent le fait que le principal concerné par l'intervention est l'enfant et que son avis n'est pas toujours sollicité. A l'avenir, il sera important d'impliquer l'enfant dans cette démarche tout en tenant compte de son degré de maturité.

Relationship between sedimentation sign and morphological grade in symptomatic lumbar spinal stenosis

Introduction Le canal lombaire étroit symptomatique est de plus en plus fréquent. Le traitement dépend des signes cliniques et des résultats radiologiques. Mais actuellement il n'y a pas de consensus concernant la classification radiologique. Le but de notre article est d'étudier la relation entre deux paramètres morphologiques radiologiques récemment décrits sur des examens par IRM. Le premier est le « signe de sédimentation » (Sedimentation Sign) et le second est le grade morphologique de la sténose lombaire (Morphological Grade), tous deux décrit en 2010. Matériel et méthode Nous avons étudié des examens IRM de 137 patients suivit dans notre établissement. De ces 137, 110 étaient issus d'une base de donnée de patients avec une sténose lombaire dont la Symptomatologie était typique. Dans ce groupe, 73 patients avaient été traité chirurgicalement et 37 conservativement, dépendant de la sévérité des symptômes. Un troisième groupe, le groupe contrôle, était formé de 27 patients ne présentant que des douleurs lombaires basses sans sciatalgie. La sévérité de la sténose a été évaluée sur les examens IRM au niveau du disque en utilisant les 4 grades de la classification morphologique, de A à D. La présence d'un signe de sédimentation a été, quand à lui, notée au niveau du pédicule, au-dessus et au-dessous du niveau présentant la sténose maximale, comme décrit dans l'article original. Résultat La présence d'un signe de sédimentation positif a été observée chez 58% des patients présentant un grade morphologique B, 69% chez les patients avec un grade C et 76% des patients avec un grade D. Dans le groupe de patient traité chirurgicalement pour une sténose canalaire, 67% des patients présentaient un signe de sédimentation positif, 35% dans le groupe du traitement conservateur, et 8 % dans le groupe contrôle. En ce qui concerne la classification du grade morphologique, nous avons regroupé les grade C et D. Il y avait 97% de patients avec un grade C et D dans le groupe du traitement chirurgical, 35 % dans le groupe du traitement conservateur et 18% dans le groupe contrôle. Nous avons donc calculé que la présence d'un signe de sédimentation positif chez les patients avec une sténose lombaire symptomatique augmente le risque d'avoir besoin d'une intervention de l'ordre de 3.5 fois (OR=3.5). En utilisant la classification du grade morphologique, nous avons calculé un risque encore plus élevé. Un patient avec une sténose canalaire de grade C ou D a 65 fois plus de risque d'avoir besoin d'une intervention (OR=65). Conclusion : Les résultats montrent une corrélation entre ces deux paramètres morphologiques. Mais la prédiction du besoin d'une intervention n'est pas équivalente. Un tiers des patients dans le groupe du traitement chirurgical n'avaient pas de signe de sédimentation positif. Ce signe apparaît donc comme un moins bon prédicteur pour le choix du traitement comparé à la sévérité de la sténose jugée avec le grade morphologique (OR 3.5 vs 65).

Análisis del Espacio Schengen en materia de seguridad como base para la implementación del Protocolo sobre la Facilitación del Movimiento de Personas de la Comunidad para el Desarrollo de África Austral (SADC)

El fin de la Guerra Fría supuso no sólo el triunfo del capitalismo y de la democracia liberal, sino un cambio significativo en el Sistema Internacional; siendo menos centralizado y más regionalizado, como consecuencia de la proximidad y relaciones de interdependencia entre sus actores (no sólo Estados) y permitiendo la formación de Complejos Regionales de Seguridad (CRS). Los CRS son una forma efectiva de relacionarse y aproximarse a la arena internacional pues a través de sus procesos de securitización y desecuritización consiguen lograr objetivos específicos. Partiendo de ello, tanto la Unión Europea (UE) como la Comunidad para el Desarrollo de África Austral (SADC) iniciaron varios procesos de securitización relacionados con la integración regional; siendo un ejemplo de ello la eliminación de los controles en sus fronteras interiores o libre circulación de personas; pues consideraron que de no hacerse realidad, ello generaría amenazas políticas (su influencia y capacidad de actuación estaban amenazadas), económicas (en cuanto a su competitividad y niveles básicos de bienestar) y societales (en cuanto a la identidad de la comunidad como indispensable para la integración) que pondrían en riesgo la existencia misma de sus CRS. En esta medida, la UE creó el Espacio Schengen, que fue producto de un proceso de securitización desde inicios de la década de los 80 hasta mediados de la década de los 90; y la SADC se encuentra inmersa en tal proceso de securitización desde 1992 hasta la actualidad y espera la ratificación del Protocolo para la Facilitación del Movimiento de personas como primer paso para lograr la eliminación de controles en sus fronteras interiores. Si bien tanto la UE como la SADC consideraron que de no permitir la libre circulación de personas, su integración y por lo tanto, sus CRS estaban en riesgo; la SADC no lo ha logrado. Ello hace indispensable hacer un análisis más profundo de sus procesos de securitización para así encontrar sus falencias con respecto al éxito de la UE. El análisis está basado en la Teoría de los Complejos de Seguridad de Barry Buzan, plasmada en la obra Security a New Framework for Analysis (1998) de Barry Buzan, Ole Waever y Jaap de Wilde y será dividido en cada una de las etapas del proceso de securitización: la identificación de una amenaza existencial a un objeto referente a través de un acto discursivo, la aceptación de una amenaza por parte de una audiencia relevante y las acciones de emergencia para hacer frente a las amenazas existenciales; reconociendo las diferencias y similitudes de un proceso de securitización exitoso frente a otro que aún no lo ha sido.

Content marketing and brand engagement on social media: a study of Facebook´s posts in the ecommerce industry in Brazil

Content marketing refers to marketing format that involves the creation and sharing of media and publishing content in order to acquire customers. It is focused not on selling, but on communicating with customers and prospects. In today world´s, a trend has been seen in brands becoming publishers in order to keep up with their competition and more importantly to keep their base of fans and followers. Content Marketing is making companies to engage consumers by publishing engaging and value-filled content. This study aims to investigate if there is a link between brand engagement and Facebook Content Marketing practices in the e-commerce industry in Brazil. Based on the literature review, this study defines brand engagement on Facebook as the numbers of "likes" "comments" and "shares" that a company receives from its fans. These actions reflect the popularity of the brand post and leads to engagement. The author defines a scale where levels of Content Marketing practices are developed in order to analyze brand posts on Facebook of an ecommerce company in Brazil. The findings reveal that the most important criterion for the company is the one regarding the picture of the post, where it examines whether the photo content is appealing to the audience. Moreover, it was perceived that the higher the level of these criterion in a post, the greater the number of likes, comments and shares the post receives. The time when a post is published does not present a significant role in determining customer engagement and the most important factor within a publication is to reach the maximum level in the Content Marketing Scale.

Estruturas cerâmicas a base de zircônia e alumina utilizadas na confecção de infra - estruturas para coroas e pontes fixas

The continuous advances in ceramic systems for crowns and bridges infrastructure getting researchers and manufacturers looking for a material that has good mechanical properties and aesthetic. The purpose of this study was to verify in which composition and sintering temperature the ceramic system for infrastructure composed of alumina and zirconia would have the best mechanical properties. With this objective we made in UFRN laboratories 45 test bodies in the form of rectangular bars with the following dimensions: 30mm x 8mm x 3mm, where we separated by the sintering temperature: 1200°C, 1300ºC and 1400ºC, and by comp osition: 33% Zirconia + 67% Alumina; 50% Zirconia + 50% Alumina and 25% Zirconia + 75% Alumina, these test bodies were not infiltrated with glass. Also, were made nine test bodies by a technical from a laboratory with a commercial ceramic system: in the Ceram Zircônia (Vita - Zahnfabrik) with the following dimensions: 20mm x 10mm x 0.5mm, these test bodies following all recommendations of the manufacturer and were infiltrated with glass. Were realized optical and electronic microscopy analyses, hardness testing, resistance to bending in three points, porosity and bulk density. After analysis of the results we verified that with the increasing of sintering temperature, increased the value of resistance to bending, but with the same temperature there was no significant difference between the different compositions, samples made with the commercial ceramic that were infiltrated, presented a resistance to bending six times greater than the samples sintered to 1400°C and which have not been infiltra ted. There was no significant difference between the values of apparent porosity for the samples made in UFRN laboratories, but the samples of commercial ceramic obtained 0% in porosity apparent value. In tests of Rockwell Hardness there is an increase in the value of Hardness, with the increase of sintering temperature for the samples not infiltrated. Samples infiltrated showed similar values as the samples sintered in 1400°C. There was no significant difference between the values of apparent density among samples manufactured in UFRN laboratories and samples made with a commercial ceramic

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Plásticos reforçados a base de tecidos híbridos: efeitos da anisotropia e geometria normativa na caracterização mecânica e da fratura

As most current studies, reinforced plastics have been, in recent years, a viable alternative in building structural elements of medium and large, since the lightness accompanied by high performance possible. The design of hybrid polymer composites (combination of different types of reinforcements) may enable structural applications thereof, facing the most severe service conditions. Within this class of composite materials, reinforced the underlying tissues hybrid high performance are taking space when your application requires high load bearing and high rigidity. The objective of this research work is to study the challenges in designing these fabrics bring these materials as to its mechanical characterization and fracture mechanisms involved. Some parameters associated with the process and / or form of hybridization stand out as influential factors in the final performance of the material such as the presence of anisotropy, so the fabric weave, the process of making the same, normative geometry of the specimens, among others. This sense, four laminates were developed based hybrid reinforcement fabrics involving AS4 carbon fiber, kevlar and glass 49-E as the matrix epoxy vinyl ester resin (DERAKANE 411-350). All laminates were formed each with four layers of reinforcements. Depending on the hybrid fabric, all the influencing factors mentioned above have been studied for laminates. All laminates were manufactured industrially used being the lamination process manual (hand-lay-up). All mechanical characterization and study of the mechanism of fracture (fracture mechanics) was developed for laminates subjected to uniaxial tensile test, bending in three and uniaxial compression. The analysis of fracture mechanisms were held involving the macroscopic, optical microscopy and scanning electron microscopy

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of impregnation of a sponge (usually polymer) with ceramic slurry, followed by a heat treatment, which will happen the decomposition of organic material and sintering the ceramic material, resulting in a ceramic structure which is a replica of impregnated sponge. Knowledge of the mechanical properties of these ceramics is important for these materials can be used commercially. Gibson and Ashby developed a mathematical model to describe the mechanical behavior of cellular solids. This model wasn´t for describing the ceramics behavior produced by the replica method, because it doesn´t consider the defects from this type of processing. In this study were researched mechanical behavior of porous alumina ceramics obtained by the replica method and proposed modifications to the model of Gibson and Ashby to accommodate this material. The polymer sponge used in processing was characterized by thermogravimetric analysis and scanning electron microscopy. The materials obtained after sintering were characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a correction of this model through a factor related to struts integrity degree, which consider fissures present in the structure of these materials besides defects geometry within the struts

Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí

This research work is based, in search of reinforcement s vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of glass and E-02 (two) unidirectional fabrics of vegetable fibers licuri. In the configuration of the laminate layers have alternating distribution. The composite laminate was manufactured in Tecniplas Commerce & Industry LTD, in the form of a card through the manufacturing process of hand lay up. Licuri fibers used in making the foil were the City of Mare Island in the state of Bahia. After cooking and the idealization of the hybrid composite laminate, the objective of this research work has focused on evaluating the performance of the mechanical properties (ultimate strength, stiffness and elongation at break) through uniaxial tensile tests and three point bending. Comparative studies of the mechanical properties and as well as among other types of laminated hybrid composites studied previously, were performed. Promising results were found with respect to the mechanical properties of strength and stiffness to the hybridization process idealized here. To complement the entire study were analyzed in terms of macroscopic and microscopic characteristics of the fracture for all tests.

Desenvolvimento e análise de material compósito a base de penas de frango (fibras de queratina-KF) e matriz de poliéster insaturado

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite