931 resultados para Barrier-free design.


Relevância:

100.00% 100.00%

Publicador:

Resumo:

"12/17/86."

Relevância:

100.00% 100.00%

Publicador:

Resumo:

"Report no. UMTA-DC-06-0182-80-1."

Relevância:

100.00% 100.00%

Publicador:

Resumo:

"June 1990."

Relevância:

100.00% 100.00%

Publicador:

Resumo:

La construction des biosystèmes d’oxydation passive du méthane (BOPM) est une option économique et durable pour réduire les émissions de méthane des sites d’enfouissement de déchets et des effets subséquents du réchauffement climatique. Les BOPM sont constitués de deux couches principales: la couche d'oxydation du méthane (MOL) et la couche de distribution du gaz (GDL). L'oxydation du méthane se produit dans la MOL par les réactions biochimiques des bactéries méthanotrophes, et la GDL est construite sous la MOL pour intercepter et distribuer les émissions fugitives de biogaz à la base de la MOL. Fondamentalement, l'efficacité d'un BOPM est définie en fonction de l'efficacité d'oxydation du méthane dans la MOL. Par conséquent, il est indispensable de fournir des conditions adéquates pour les activités bactériennes des méthanotrophes. En plus des paramètres environnementaux, l'intensité et la distribution du biogaz influencent l'efficacité des BOPM, et ils peuvent rendre le matériau de la MOL - avec une grande capacité d'accueillir les activités bactériennes - inutilisables en termes d'oxydation du méthane sur place. L'effet de barrière capillaire le long de l'interface entre la GDL et la MOL peut provoquer des émissions localisées de méthane, due à la restriction ou la distribution non uniforme de l’écoulement ascendant du biogaz à la base de la MOL. L'objectif principal de cette étude est d'incorporer le comportement hydraulique non saturé des BOPM dans la conception des BOPM, afin d’assurer la facilité et la distribution adéquates de l'écoulement du biogaz à la base de la MOL. Les fonctions de perméabilité à l'air des matériaux utilisés pour construire la MOL des BOPM expérimentaux au site d’enfouissement des déchets de St Nicéphore (Québec, Canada), ainsi que celles d'autres de la littérature technique, ont été étudiés pour évaluer le comportement d'écoulement non saturé du gaz dans les matériaux et pour identifier le seuil de migration sans restriction du gaz. Ce dernier seuil a été introduit en tant que un paramètre de conception avec lequel le critère de conception recommandé ici, c’est à dire la longueur de la migration sans restriction de gaz (LMSG), a été défini. La LMSG est considérée comme la longueur le long de l'interface entre la GDL et la MOL où le biogaz peut migrer à travers la MOL sans restriction. En réalisant des simulations numériques avec SEEP/W, les effets de la pente de l'interface, des paramètres définissant la courbe de rétention d'eau, de la fonction de la conductivité hydraulique du matériau de la MOL sur la valeur de la LMSG (représentant la facilité d'écoulement du biogaz à l'interface) et de la distribution de l'humidité (et par conséquent celle du biogaz) ont été évalués. Selon les résultats des simulations, la conductivité hydraulique saturée et la distribution des tailles de pores du matériau de la MOL sont les paramètres les plus importants sur la distribution de l'humidité le long de l'interface. Ce dernier paramètre influe également sur la valeur du degré de saturation et donc la facilité du biogaz à la base de la MOL. La densité sèche du matériau de MOL est un autre paramètre qui contrôle la facilité d'écoulement ascendant du biogaz. Les limitations principales de la présente étude sont associées au nombre de matériaux de MOL testés et à l'incapacité de SEEP/W de considérer l'évapotranspiration. Toutefois, compte tenu des hypothèses raisonnables dans les simulations et en utilisant les données de la littérature, on a essayé de réduire ces limitations. En utilisant les résultats des expériences et des simulations numériques, des étapes et des considérations de conception pour la sélection du matériau de MOL et de la pente d'interface ont été proposées. En effet,le comportement hydraulique non saturé des matériaux serait intégré dans les nécessités de conception pour un BOPM efficace, de sorte que la capacité maximale possible d'oxydation du méthane du matériau de la MOL soit exploitée.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Purpose This thesis is about liveability, place and ageing in the high density urban landscape of Brisbane, Australia. As with other major developed cities around the globe, Brisbane has adopted policies to increase urban residential densities to meet the main liveability and sustainability aim of decreasing car dependence and therefore pollution, as well as to minimise the loss of greenfield areas and habitats to developers. This objective hinges on urban neighbourhoods/communities being liveable places, which residents do not have to leave for everyday living. Community/neighbourhood liveability is an essential ingredient in healthy ageing in place and has a substantial impact upon the safety, independence and well-being of older adults. It is generally accepted that ageing in place is optimal for both older people and the state. The optimality of ageing in place generally assumes that there is a particular quality to environments or standard of liveability in which people successfully age in place. The aim of this thesis was to examine if there are particular environmental qualities or aspects of liveability that test optimality and to better understand the key liveability factors that contribute to successful ageing in place. Method A strength of this thesis is that it draws on two separate studies to address the research question of what makes high density liveable for older people. In Chapter 3, the two methods are identified and differentiated as Method 1 (used in Paper 1) and Method 2 (used in Papers 2, 3, 4 and 5). Method 1 involved qualitative interviews with 24 inner city high density Brisbane residents. The major strength of this thesis is the innovative methodology outlined in the thesis as Method 2. Method 2 involved a case study approach employing qualitative and quantitative methods. Qualitative data was collected using semi-structured, in-depth interviews and time-use diaries completed by participants during the week of tracking. The quantitative data was gathered using Global Positioning Systems for tracking and Geographical Information Systems for mapping and analysis of participants’ activities. The combination of quantitative and qualitative analysis captured both participants’ subjective perceptions of their neighbourhoods and their patterns of movement. This enhanced understanding of how neighbourhoods and communities function and of the various liveability dimensions that contribute to active ageing and ageing in place for older people living in high density environments. Both studies’ participants were inner-city high density residents of Brisbane. The study based on Method 1 drew on a wider age demographic than the study based on Method 2. Findings The five papers presented in this thesis by publication indicate a complex inter-relationship of the factors that make a place liveable. The first three papers identify what is comparable and different between the physical and social factors of high density communities/neighbourhoods. The last two papers explore relationships between social engagement and broader community variables such as infrastructure and the physical built environments that are risk or protective factors relevant to community liveability, active ageing and ageing in place in high density. The research highlights the importance of creating and/or maintaining a barrier-free environment and liveable community for ageing adults. Together, the papers promote liveability, social engagement and active ageing in high density neighbourhoods by identifying factors that constitute liveability and strategies that foster active ageing and ageing in place, social connections and well-being. Recommendations There is a strong need to offer more support for active ageing and ageing in place. While the data analyses of this research provide insight into the lived experience of high density residents, further research is warranted. Further qualitative and quantitative research is needed to explore in more depth, the urban experience and opinions of older people living in urban environments. In particular, more empirical research and theory-building is needed in order to expand understanding of the particular environmental qualities that enable successful ageing in place in our cities and to guide efforts aimed at meeting this objective. The results suggest that encouraging the presence of more inner city retail outlets, particularly services that are utilised frequently in people’s daily lives such as supermarkets, medical services and pharmacies, would potentially help ensure residents fully engage in their local community. The connectivity of streets, footpaths and their role in facilitating the reaching of destinations are well understood as an important dimension of liveability. To encourage uptake of sustainable transport, the built environment must provide easy, accessible connections between buildings, walkways, cycle paths and public transport nodes. Wider streets, given that they take more time to cross than narrow streets, tend to .compromise safety - especially for older people. Similarly, the width of footpaths, the level of buffering, the presence of trees, lighting, seating and design of and distance between pedestrian crossings significantly affects the pedestrian experience for older people and impacts upon their choice of transportation. High density neighbourhoods also require greater levels of street fixtures and furniture for everyday life to make places more useable and comfortable for regular use. The importance of making the public realm useful and habitable for older people cannot be over-emphasised. Originality/value While older people are attracted to high density settings, there has been little empirical evidence linking liveability satisfaction with older people’s use of urban neighbourhoods. The current study examined the relationships between community/neighbourhood liveability, place and ageing to better understand the implications for those adults who age in place. The five papers presented in this thesis add to the understanding of what high density liveable age-friendly communities/ neighbourhoods are and what makes them so for older Australians. Neighbourhood liveability for older people is about being able to age in place and remain active. Issues of ageing in Australia and other areas of the developed world will become more critical in the coming decades. Creating livable communities for all ages calls for partnerships across all levels of government agencies and among different sectors within communities. The increasing percentage of older people in the community will have increasing political influence and it will be a foolish government who ignores the needs of an older society.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The object of the present study is the process of gas transport in nano-sized materials, i.e. systems having structural elements of the order of nanometers. The aim of this work is to advance the understanding of the gas transport mechanism in such materials, for which traditional models are not often suitable, by providing a correct interpretation of the relationship between diffusive phenomena and structural features. This result would allow the development new materials with permeation properties tailored on the specific application, especially in packaging systems. The methods used to achieve this goal were a detailed experimental characterization and different simulation methods. The experimental campaign regarded the determination of oxygen permeability and diffusivity in different sets of organic-inorganic hybrid coatings prepared via sol-gel technique. The polymeric samples coated with these hybrid layers experienced a remarkable enhancement of the barrier properties, which was explained by the strong interconnection at the nano-scale between the organic moiety and silica domains. An analogous characterization was performed on microfibrillated cellulose films, which presented remarkable barrier effect toward oxygen when it is dry, while in the presence of water the performance significantly drops. The very low value of water diffusivity at low activities is also an interesting characteristic which deals with its structural properties. Two different approaches of simulation were then considered: the diffusion of oxygen through polymer-layered silicates was modeled on a continuum scale with a CFD software, while the properties of n-alkanthiolate self assembled monolayers on gold were analyzed from a molecular point of view by means of a molecular dynamics algorithm. Modeling transport properties in layered nanocomposites, resulting from the ordered dispersion of impermeable flakes in a 2-D matrix, allowed the calculation of the enhancement of barrier effect in relation with platelets structural parameters leading to derive a new expression. On this basis, randomly distributed systems were simulated and the results were analyzed to evaluate the different contributions to the overall effect. The study of more realistic three-dimensional geometries revealed a prefect correspondence with the 2-D approximation. A completely different approach was applied to simulate the effect of temperature on the oxygen transport through self assembled monolayers; the structural information obtained from equilibrium MD simulations showed that raising the temperature, makes the monolayer less ordered and consequently less crystalline. This disorder produces a decrease in the barrier free energy and it lowers the overall resistance to oxygen diffusion, making the monolayer more permeable to small molecules.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

People with disabilities often encounter difficulties while trying to learn something, because teaching material is for example not accessible to blind people or rooms, where courses take place, are not accessible to people using a wheelchair. E-learning provides an opportunity to disabled people. With the new German law on the equalisation of opportunities for people with disabilities for the first time access to information technology was explicitly taken up in German legislation. As a consequence of this law the framework law on universities (Hochschulrahmengesetz) was changed. The law now commit universities not to discriminate disabled students in their studies. For references on how universities can design accessible e-learning contents and provide accessible information online see http://wob11.de/links/anleitungen.html#elearning.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Se presenta un nuevo método de diseño conceptual en Ingeniería Aeronáutica basado el uso de modelos reducidos, también llamados modelos sustitutos (‘surrogates’). Los ingredientes de la función objetivo se calculan para cada indiviudo mediante la utilización de modelos sustitutos asociados a las distintas disciplinas técnicas que se construyen mediante definiciones de descomposición en valores singulares de alto orden (HOSVD) e interpolaciones unidimensionales. Estos modelos sustitutos se obtienen a partir de un número limitado de cálculos CFD. Los modelos sustitutos pueden combinarse, bien con un método de optimización global de tipo algoritmo genético, o con un método local de tipo gradiente. El método resultate es flexible a la par que mucho más eficiente, computacionalmente hablando, que los modelos convencionales basados en el cálculo directo de la función objetivo, especialmente si aparecen un gran número de parámetros de diseño y/o de modelado. El método se ilustra considerando una versión simplificada del diseño conceptual de un avión. Abstract An optimization method for conceptual design in Aeronautics is presented that is based on the use of surrogate models. The various ingredients in the target function are calculated for each individual using surrogates of the associated technical disciplines that are constructed via high order singular value decomposition and one dimensional interpolation. These surrogates result from a limited number of CFD calculated snapshots. The surrogates are combined with an optimization method, which can be either a global optimization method such as a genetic algorithm or a local optimization method, such as a gradient-like method. The resulting method is both flexible and much more computationally efficient than the conventional method based on direct calculation of the target function, especially if a large number of free design parameters and/or tunablemodeling parameters are present. The method is illustrated considering a simplified version of the conceptual design of an aircraft empennage.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

We extend our previous work into error-free representations of transform basis functions by presenting a novel error-free encoding scheme for the fast implementation of a Linzer-Feig Fast Cosine Transform (FCT) and its inverse. We discuss an 8x8 L-F scaled Discrete Cosine Transform where the architecture uses a new algebraic integer quantization of the 1-D radix-8 DCT that allows the separable computation of a 2-D DCT without any intermediate number representation conversions. The resulting architecture is very regular and reduces latency by 50% compared to a previous error-free design, with virtually the same hardware cost.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Elevated cholesterol in mid-life has been associated with increased risk of dementia in later life. We have previously shown that low density lipoprotein (LDL) is more oxidised in the plasma of dementia patients although total cholesterol levels remained unchanged. Increased systemic oxidative modification (oxLDL) and nitration is also observed during hypercholesterolemia. We have investigated the hypothesis that disruption of blood brain barrier (BBB) function by oxLDL and their lipids may increase risk of neurodegeneration in later life and that statin intervention can mitigate the effects of hyperlipidaemia in mid-life. LDL isolated from statin-naïve hypercholesterolaemic subjects had higher mobility by agarose gel electrophoresis (Rf;0.53±0.06) and 8-isoprostane F2α concentration (43.5±8.42pg/ml) compared to control subjects (Rf; 0.46±0.05 and 24.2±5.37pg/ml respectively; p<0.05). Compared to HMVEC treatment with the LDL-lipids (5μM) from normolipidaemic subjects, LDL-lipids from hypercholesterolaemic subjects increased barrier permeability (103.4±12.5 Ωcm2 v 66.7±7.3 Ωcm2,P<0.01) and decreased cellular glutathione levels (18.5nmol/mg v 12.3nmol/mg) compared to untreated cells (26.2±3.6nmol/mg). LDL-lipids isolated from normolipidaemic subjects shows reduced risk to damage a BBB model compared with LDL-lipids from hypercholesterolaemic subjects. Moreover, a three month statin-intervention reduced the propensity for LDL-lipids from subjects with hyperlipidaemia to damage HMVEC. Post-statin treatment the cytotoxic and pro-inflammatory effects of LDL lipids disappeared. These data support the hypothesis that in vivo intervention with statins modifies LDL lipid oxidation, exerting a protective effect against in microvascular damage independent of cholesterol concentration.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

In 2015, the Sydenham Street Revived pop-up park project (SSR) transformed Sydenham Street between Princess and Queen Streets into a temporary pedestrian-only public space. The goal of the project was to test out the idea of permanently pedestrianizing this street section. But what did this urban experiment ultimately prove? Using video footage, photographs, and observations recorded before and during the project, this report analyzes the use of the space in order to evaluate the claim that SSR created a successful public space and to make recommendations for a permanent public space on Sydenham Street. Two research methods were used: quantitative data collection, consisting of headcounts of both pedestrians and stationary users of the space; and a qualitative observational survey, based on the criteria for successful public spaces developed by the Project for Public Spaces. Data collection occurred two days one week prior to the project, and two days during the project, on days that were similar in terms of temperature and weather. The research revealed that the SSR did create a successful public space, although additional research is needed in order to determine how the space would function as a public place throughout different seasons, to study the street closure’s impact on surrounding residents and businesses, and to understand how private commercial activity would influence use. Recommendations for a permanent public space on Sydenham Street include considerations for flexible street design and a continuous, barrier-free surface; ensuring that there is an abundance of places to sit; making opportunities for public and community-created art; and to improve walkability by connecting the grid using a mid-block walkway.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

A filosofia do acesso livre ao conhecimento científico surgiu da dificuldade das bibliotecas universitárias de todo mundo em manter atualizadas as assinaturas das coleções de periódicos científicos. Os repositórios institucionais são uma das ferramentas que se mostram como alternativa para a comunicação da Ciência livre de barreiras de acesso. A pesquisa tem por objetivo verificar quais são as perspectivas futuras das atuais políticas de implementação de repositórios institucionais de acesso livre no Brasil na opinião de especialistas na área, tendo como base a análise do estado da arte das implementações de Repositórios Institucionais no Brasil. Neste trabalho, a pesquisa é dividida em três etapas: a primeira consiste na coleta de dados descritivos dos repositórios institucionais da Universidade de Brasília (RIUnB) e do Superior Tribunal de Justiça (BDJur-STJ); já na segunda etapa de pesquisa, procede-se à consulta aos especialistas indagando-os acerca da situação atual das implementações de repositórios institucionais no Brasil; e, por fim, na terceira etapa de pesquisa consultamos estes mesmos especialistas sobre os desdobramentos futuros destas políticas no País. Utilizamos da técnica Delfos de pesquisa, onde os especialistas são consultados através de questionários constituídos de perguntas abertas, possibilitando assim chegar a um consenso das opiniões no final da pesquisa. Como resultado da pesquisa, é elaborado um quadro com a tabulação das respostas dos especialistas consultados revelando o panorama das perspectivas futuras das implementações de repositórios institucionais no Brasil na opinião dos especialistas que fazem parte da nossa amostra de pesquisa.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This qualitative study was designed to inquire about the barriers to participation within the fitness industry for people living with mobility challenges. i\n examination of the insights, stolies~ and experiences with barriers through interviews gi ven by 4 people living with mobility challenges (PMC) formed the core of the research. An analysis of the interviews from the 4 PMC informants was performed at t\\/O levels. First, a content analysis served to identify general and specific categories related to barrier issues within various fitness environments. Secondly, in-depth thematic analyses of the entries related to the insights and stories from the 4 informants which emerged from the content analysis of the data gave rise to fi ve thematic statements. From the thematic statements a fitness industry awareness protocol was created in the fonn of a statement response questionnaire. The protocol, which was given to 4 fitness assessors/trainers, \vas used to provide a snapshot of the fitness industry's readiness to work vvith disability. Throughout the process, the four PNIC informants formed a collaborati vely involved group of coresearchers, adding their voices to the narrative of the fitness-barrier experience. The result of the study suggests that barriers to participation within the fitness industry for PMC exist in various forms and levels of severity. The results also suggest that the fitness industry needs to better prepare their people and environment for working with people with physical disabilities, such as PMC, and provide a more open and positi ve environment for participation. Within the context of any fitness-related environment, recognizing that barriers to participation do exist, and acknowledging and accepting people with disabilities for who they are as indi viduals, will serve to develop a relationship where fitness practitioners and people with disabilities can work towards creating an inviting, inclusive, accessible, and barrier-free fitness environment for all.