Diallyl disulphide, a beneficial component of garlic oil, causes a redistribution of cell-cycle growth phases, induces apoptosis and enhances butyrate-induced apoptosis in colorectal adenocarcinoma cells (HT-29)

Colon cancer is a leading and expanding cause of death worldwide. A major contributory factor to this disease is diet composition; some components are beneficial (e.g. dietary fibre) whilst others are detrimental (e.g. alcohol). Garlic oil is a prominent dietary constituent that prevents the development of colorectal cancer. This effect is believed to be mainly due to diallyl disulphide (DADS), which selectively induces redox stress in cancerous (rather than normal) cells which leads to apoptotic cell death. However, the detailed mechanism by which DADS causes apoptosis remains unclear. We show that DADS-treatment of colonic adenocarcinoma cells (HT-29) initiates a cascade of molecular events characteristic of apoptosis. These include a decrease in cellular proliferation, translocation of phosphatidylserine to the plasma-membrane outer-layer, activation of caspase-3, genomic-DNA fragmentation and G2/M phase cell-cycle arrest. Short-chain fatty acids (SCFAs), particularly butyrate (abundantly produced in the gut by bacterial fermentation of dietary polysaccharides), enhance colonic cell integrity but, in contrast, inhibit colonic-cancer cell growth. Combining DADS with butyrate augmented the effect of butyrate on HT-29 cells. These results suggest that the anti-cancerous properties of DADS afford greater benefit when supplied with other favourable dietary factors (SCFA/polysaccharides) that likewise reduce colonic tumour development.

Solution behavior and surface properties of carboxymethylcellulose acetate butyrate

Solution behavior of carboxymethylcellulose acetate butyrate (CMCAB) in acetone and ethyl acetate has been investigated by small-angle X-ray scattering (SAXS) and capillary viscometry and correlated with the characteristics of CMCAB films. Viscosity and SAXS measurements showed that ethyl acetate is a better solvent than acetone for CMCAB. Thin films of CMCAB were deposited onto silicon wafers (Si/SiO(2)) by spin coating. AFM images revealed that CMCAB spin coated films from solutions prepared in ethyl acetate were homogeneous and flat. However, films obtained from solutions in acetone were very rough. Contact angle measurements with polar and apolar test liquids characterized CMCAB surfaces as hydrophobic and allowed estimating the surface energy of CMCAB. Sum frequency generation vibrational spectroscopy was used to understand the role played by solvents and to gain insight about molecular orientation at Si/SiO(2)/CMCAB interface.

Thin films of carbohydrate based surfactants and carboxymethylcellulose acetate butyrate mixtures: Morphology and thermal behavior

Thin films of mixtures containing carboxymethylcellulose acetate butyrate (CMCAB) and carbohydrate based surfactant, namely, sorbitan monopalmitate (Span 40) or poly(oxyethylene) sorbitan monopalmitate (Tween 40) were spin-coated onto silicon wafers. The effect of surfactant concentration on resulting film morphology and surface toughness Was Studied by atomic force microscopy (AFM). Upon increasing the concentration of Span 40 in the mixture, films became rougher and more heterogeneous, indicating surface enrichment by Span 40 molecules. In the case of mixtures composed by CMCAB and Tween 40, the increase of Tween 40 in the mixture led to smoother and more homogeneous films, indicating compatibility between both components. Differential scanning calorimetry (DSC) revealed that Span 40 and Tween 40 act as plasticizers for CMCAB, leading to dramatic reduction of glass transition temperature of CMCAB, namely, Delta T(g) = -158 degrees C and Delta T(g)=-179 degrees C. respectively. (C) 2008 Elsevier B.V. All rights reserved.

The influence of specific luminal factors on the colonic epithelium : high-dose butyrate and physical changes suppress early carcinogenic events in rats

INTRODUCTION Although luminal delivery of butyrate is one putative mechanism by which biology of the colonic epithelium might be influenced by changes in luminal contents, there is a paucity of supportive cause–effect evidence. This study aimed to directly establish whether distal colonic butyrate delivery is able to alter the response of the distal colonic epithelium to a carcinogen.
METHODS Groups of male Sprague-Dawley rats with chronically intubated colons received infusions of 80 mM butyrate or 0.9 percent saline into distal colon two or five times daily. Three weeks after exposure to azoxymethane (15 mg/kg subcutaneously), the density of aberrant crypts was quantified in distal colon.
RESULTS Infusions of 0.5 ml twice daily, whether containing saline or butyrate, decreased the number of aberrant crypt foci by 45 percent compared with rats receiving no infusions (P = 0.004, analysis of variance). Similar results were obtained when infusions were restricted to the postinitiation phase. When infusions were increased to 1 ml five times daily, saline infusions similarly suppressed aberrant crypt formation (38 percent), but butyrate infusions suppressed it to a greater degree (by 64 percent; P = 0.02 compared with saline infusion, t-test).
CONCLUSIONS High levels of butyrate delivery to the distal colonic lumen alter the epithelial response to a carcinogen in otherwise healthy rats. This finding directly supports the notion that the effects of butyrate on cells in vitro do occur in vivo provided a sufficient dose is delivered. The effect of infusion of liquid per se on the epithelial response highlights the potential impact physical changes alone can have on the colonic epithelium.

Self-assembly behavior of colistin and its prodrug colistin methanesulfonate : implications for solution stability and solubilization

Colistin is an amphiphilic antibiotic that has re-emerged into clinical use due to the increasing prevalence of difficult-to-treat Gram-negative infections. The existence of self-assembling colloids in solutions of colistin and its derivative prodrug, colistin methanesulfonate (CMS), was investigated. Colistin and CMS reduced the air−water interfacial tension, and dynamic light scattering (DLS) studies showed the existence of 2.07 ± 0.3 nm aggregates above 1.5 mM for colistin and of 1.98 ± 0.36 nm aggregates for CMS above 3.5 mM (mean ± SD). Above the respective critical micelle concentrations (CMC) the solubility of azithromycin, a hydrophobic antibiotic, increased approximately linearly with increasing surfactant concentration (5:1 mol ratio colistin:azithromycin), suggestive of hydrophobic domains within the micellar cores. Rapid conversion of CMS to colistin occurred below the CMC (60% over 48 h), while conversion above the CMC was less than 1%. The formation of colistin and CMS micelles demonstrated in this study is the proposed mechanism for solubilization of azithromycin and the concentration-dependent stability of CMS.

In vitro and in vivo evaluation of a primaquine prodrug without red blood cell membrane destabilization property

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Potential tuberculostatic agents: Micelle-forming copolymer poly(ethylene glycol)-poly(aspartic acid) prodrug with isoniazid

With the objective of obtaining slow-acting isoniazid derivatives, of potential use as chemoprophylactics or chemotherapeutics in tuberculosis, the micelle-forming copolymer of poly(ethylene glycol)-poly(aspartic acid) prodrug with isoniazid was synthesized. The derivative obtained was found to be active in Mycobacterium Il(tuberculosis culture, with a minimal inhibitory concentration (MIC) 5.6 times lower than that of the tuberculostatic drug.

Potential tuberculostatic agent: Micelle-forming pyrazinamide prodrug

Pyrazinamide was condensed with the poly(ethylene glycol)-poly(aspartic acid) copolymer (PEG-PASP), a micelle-forming derivative was obtained that was characterized in terms of its critical micelle concentration (CMC) and micelle diameter. The CMC was found by observing the solubility of Sudan III in Poly(ethylene glycol)-poly(pyrazinamidomethyl aspartate) copolymer (PEG-PASP-PZA) solutions. The mean diameter of PEG-PASP-PZA micelles, obtained by analyzing the dynamic light-scattering data, was 78.2 nm. The PEG-PASP-PZA derivative, when assayed for anti-Mycobacterium activity, exhibited stronger activity than the simple drug.

Synthesis and in vitro evaluation of potential antichagasic hydroxymethyinitrofurazone (NFOH-121): A new nitrofurazone prodrug

The synthesis of mutual prodrugs of nitrofurazone with primaquine, using specific and nonspecific spacer groups, has been previously attempted seeking selective antichagasic agents. The intermediate reaction product, hydroxymethylnitrofurazone (NFOH-121), was isolated and tested in LLC-MK2 culture cells infected with trypomastigotes forms of Trypanosoma cruzi showing higher trypanocidal activity than nitrofurazone and benznidazol in all stages. The mutagenicity tests showed that the prodrug was less toxic than the parent drug. Degradation assays were carried out in pH 1.2 and 7.4. (C) 2003 Elsevier Ltd. All rights reserved.

A Prodrug Approach to Improve the Physico-Chemical Properties and Decrease the Genotoxicity of Nitro Compounds

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Pharmacological Evaluation and Preliminary Pharmacokinetics Studies of a New Diclofenac Prodrug without Gastric Ulceration Effect

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)