Atlantic salmon in regulated rivers : Migration, dam passage, and fish behavior

Hydropower dams block migration routes and disrupt longitudinal connectivity in rivers, thereby posing a threat to migratory fish species. Various fish passage solutions have been implemented to improve connectivity with varying success. A well-functioning passage solution must ensure safe and timely passage routes that are used by a substantial portion of the migrating fish. In this thesis, I report the results from telemetry studies where the behavior and survival of migrating Atlantic salmon spawners, post-spawners and smolts have been evaluated in relation to hydropower dam passage. I evaluate downstream passage performance at dams with no passage solutions in the River Klarälven, and with simple passage solutions in in the Winooski River. In the River Ätran, I study both upstream- and downstream passage performance at a dam with sophisticated passage solutions based on the best available technology. In addition, I have studied the survival and behavior of post-spawners and hatchery-released smolts. A substantial portion of the spawners survived spawning and initiated downstream migration. Most males migrated downstream in autumn following spawning, whereas females tended to stay in the river until spring. For hatchery-reared smolts, early release was associated with faster initiation of migration and higher survival compared to late release. Multiple dam passage resulted in high mortality for both smolts and kelts. For smolts, dam passage, even with simple passage solutions, was associated with substantial delay and mortality. High spill levels were linked to high survival and short delay for downstream migrating salmon. The best available passage solution, which consisted of a nature-like fishway and a low sloping intake rack to guide fish to a bypass, resulted in rapid passage of a large portion of the adult migrants.

Quality assurance and quality control in mammography: a review of available guidance worldwide

Objectives - Review available guidance for quality assurance (QA) in mammography and discuss its contribution to harmonise practices worldwide. Methods - Literature search was performed on different sources to identify guidance documents for QA in mammography available worldwide in international bodies, healthcare providers, professional/scientific associations. The guidance documents identified were reviewed and a selection was compared for type of guidance (clinical/technical), technology and proposed QA methodologies focusing on dose and image quality (IQ) performance assessment. Results - Fourteen protocols (targeted at conventional and digital mammography) were reviewed. All included recommendations for testing acquisition, processing and display systems associated with mammographic equipment. All guidance reviewed highlighted the importance of dose assessment and testing the Automatic Exposure Control (AEC) system. Recommended tests for assessment of IQ showed variations in the proposed methodologies. Recommended testing focused on assessment of low-contrast detection, spatial resolution and noise. QC of image display is recommended following the American Association of Physicists in Medicine guidelines. Conclusions - The existing QA guidance for mammography is derived from key documents (American College of Radiology and European Union guidelines) and proposes similar tests despite the variations in detail and methodologies. Studies reported on QA data should provide detail on experimental technique to allow robust data comparison. Countries aiming to implement a mammography/QA program may select/prioritise the tests depending on available technology and resources.

Sistema de Torre de Refrigeração

Mestrado em Engenharia Química - Ramo Optimização Energética na Indústria Química

Integrated ecological-economic modelling and assessment aproach for coastal ecosystem management

Thesis submitted to the Faculty of Sciences and Technology, New University of Lisbon, for the degree of Doctor of Philosophy in Environmental Sciences

Subgroup And Quality Of Life Analyses Of The Phase Iii Clinical Trial Of Novottf-100a Versus Best Standard Chemotherapy For Recurrent Glioblastoma

BACKGROUND: NovoTTF is a portable device delivering low-intensity, intermediate-frequency, electric fields using noninvasive, disposable scalp electrodes. These fields physically interfere with cell division. Preliminary studies in recurrent and newly diagnosed glioblastoma (GBM) have shown promising results. A phase III study in recurrent GBM has recently been concluded. METHODS: Adults (KPS ≥ 70%) with recurrent GBM (any recurrence) were randomized (stratified by surgery and center) to either NovoTTF administered continuously (20-24 hours/day, 7 days/week) or the best available chemotherapy (best physician choice [BPC]). Primary endpoint was overall survival (OS); 6-month progression-free survival (PFS6), 1-year survival, and QOL were secondary endpoints. RESULTS: Two hundred thirty-seven patients were randomized (28 centers in the United States and Europe) to either NovoTTF alone (120 patients) or BPC (117 patients). Patient characteristics were balanced, median age was 54 years (range, 23-80 years), median KPS was 80% (range, 50-100). One quarter had surgery for recurrence, and over half were at their second or more recurrence. A survival advantage for the device group was seen in patients treated according to protocol (median OS, 7.8 months vs. 6.1 months; n = 185; p = 0.01). Moreover, subgroup analysis in patients with better prognostic baseline characteristics (KPS ≥ 80%; age ≤ 60; 1st-3rd recurrence) demonstrated a robust survival benefit for NovoTTF patients compared to matched BPC patients (median OS, 8.8 months vs. 6.6 months; n = 110; p < 0.01). In this group, 1-year survival was 35% vs. 20% and PFS6 was 25.6% vs. 7.7%. Interestingly, in patients who failed bevacizumab prior to the trial, OS was also significantly extended by NovoTTF (4.4 months vs. 3.1 months; n = 23 vs. n = 21; p < 0.02). Quality of life was equivalent or superior in NovoTTF patients. CONCLUSIONS: NovoTTF, a noninvasive, novel cancer treatment modality shows significant therapeutic efficacy with improved quality of life. The impact of NovoTTF was more pronounced when patients with better baseline prognostic factors were treated. A large scale phase III clinical trial in newly diagnosed GBM is currently being conducted.

Levyteollisuuden energia-, kustannus- ja ympäristövaikutukset

Kuluvien vuosien aikana ei ole tehty kattavia tutkimuksia levyteollisuuden sähkönkulutuksista, joten on aika selvittää suurimpien sähkökäyttöjen kulutukset sekä muodostaa tutkittaville tehtaille energiataseet. Tutkittavia tehtaita ovat OSB- ja lastulevytehtaat. Yksittäisten sähkömoottoreiden kulutukset saadaan selville käyttämällä hyväksi teoreettisia lähteitä, kenttä-ja laboratoriotutkimusta. Ympäristölainsäädäntö ja siihen kiinteästi liittyvä lupakäytäntö muodostavat levyteollisuudelle yhden viimeaikojen suurimmista haasteista. Tulevaisuudessa lainsäädäntö tulee vielä entisestäänkin kiristymään. Euroopan ympäristölainsäädäntö perustuu pitkälti yhtenäislupadirektiiviin eli IPPC-direktiiviin. Direktiivin keskeinen osa on ympäristöluvan hankkiminen, koska teollista toimintaa ei voi harjoittaa ilman hyväksyttyä viranomaisen lupaa. Lupa myös velvoittaa toiminnanharjoittajan käyttämään parasta käyttökelpoista tekniikkaa päästöjen kontrolloinnissa. Yhdysvalloissa parhaan käyttökelpoisen tekniikan (BAT) vaatimus on sisälletty ympäristövirasto EPA:n MACT-standardeihin. Levyteollisuuden tehtaista syntyvät päästöt ovat hyvin samankaltaisia. Tehtaista on helposti erotettavissa kaksi suurta päästölähdettä, joita ovat kuivaus ja kuumapuristus. Merkittävimpiä päästöjä ovat haihtuvat orgaaniset yhdisteet, hiukkaset, typen oksidit, hiilimonoksidi ja rikkidioksidit. Työn loppuosa on varattu tuotantojen kustannusvaikutusten ja tunnuslukujen tarkasteluille. Saatavilla tiedoilla on keskeinen rooli tehtaiden jokapäiväisessä toiminnassa. Analysoinnin tarpeeseen vaikuttaa osaltaan nykyisen toimintaympäristön muutosherkkyys ja levymarkkinoiden kireä kilpailutilanne.

Kartoitus kloori-alkalitehtaan tuotantokapasiteetin kasvattamisesta / Kemira Chemicals Oy Joutseno

Kemira Chemicals Oy:n Joutsenon kloori-alkalitehtaalla valmistetaan elektrolyysin avulla lipeää, suolahappoa, natriumhypokloriittia ja vetyä. Tämän työn tavoitteena on kartoittaa kloori-alkalitehtaan tuotantokapasiteetin kasvatuksen yhteydessä esiin tulevat pullonkaulat, lähitulevaisuuden kunnossapitotarpeet sekä parhaat käytettävissä olevat teknologiavaihtoehdot kloori-alkalitehtaan osa-alueille, joihin tuotantokapasiteetin kasvatuspaineet kohdistuvat: elektrolyysi, lipeän haihdutus ja suolahappopolttimet. Pullonkaulojen kartoittaminen toteutettiin rakentamalla taulukkolaskentamalli kloori-alkalitehtaan prosesseista. Mallin avulla simuloitiin elektrolyysin kloorin tuotantoa, jota kasvatettiin asteittain 54 kt:sta/a aina 100 kt:iin/a asti ja tutkittiin prosessien käyttäytymistä. Tarkastelun pohjalta havaittiin, että kloorin tuotantoa kasvattaessa, tulee lisätä myös tuotantokapasiteettia suolahapon valmistukseen, elektrolyysiin, demineralisoidun veden valmistukseen ja lipeän haihdutuslaitokseen sekä suolahapon ja lipeän varastointikapasiteetteihin. Vaihtoehtoiset teknologiat määritettiin kirjallisuudesta ja laitetoimittajien esitteistä. Lähivuosien kunnossapitotarpeet kartoitettiin haastattelemalla tehtaan henkilökuntaa. Työstä eskaloitui useita jatkotutkimuskohteita, joita ovat bipolaari-teknologian soveltuvuus Joutsenon kloori-alkalitehtaalle, uusien HCl-polttimien esisuunnittelu, höyryn käytön tehostaminen nykyisessä lipeän haihdutuslaitoksessa sekä uusien haihdutusteknologioiden soveltuvuus Joutsenon kloori-alkalitehtaalle, höyry- ja jäähdytysverkostojen kartoitukset sekä demineralisoidun veden valmistuskapasiteetin kasvattaminen.

Growth And Characterization Of Te-Se System And Some Tei.I.Urioes

The physical properties of solid matter are basically influenced by the existence of lattice defects; as a result the study of crystal defects has assumed a central position in solid state physics and materials science. The study of dislocations ixa single crystals can yield a great deal of information on the mechanical properties of materials. In order to secure a full understanding of the processes taking place in semiconducting materials, it is important to investigate the microhardness of these materials-—the most reliable method of determining the fine structure of crystals, the revelation of micro—inhomogenities in the distribution of impurities, the effect of dislocation density on the mechanical properties of crystals etc. Basically electrical conductivity in single crystals is a defect controlled phenomenon and hence detailed investigation of the electrical properties of these materials is one of the best available methods for the study of defects in them. In the present thesis a series of detailed studies carried out in Te—Se system, Bi2Te3 and In2Te3 crystals using surface topographical, dislocation and microindentation analysis as well as electrical measurements are presented

Human Health Impacts of Contaminants Found in Local Drinking Water Supply

Many contaminants are currently unregulated by the government and do not have a set limit, known as the Maximum Contaminant Level, which is dictated by cost and the best available treatment technology. The Maximum Contaminant Level Goal, on the other hand, is based solely upon health considerations and is non-enforceable. In addition to being naturally occurring, contaminants may enter drinking water supplies through industrial sources, agricultural practices, urban pollution, sprawl, and water treatment byproducts. Exposure to these contaminants is not limited to ingestion and can also occur through dermal absorption and inhalation in the shower. Health risks for the general public include skin damage, increased risk of cancer, circulatory problems, and multiple toxicities. At low levels, these contaminants generally are not harmful in our drinking water. However, children, pregnant women, and people with compromised immune systems are more vulnerable to the health risks associated with these contaminants. Vulnerable peoples should take additional precautions with drinking water. This research project was conducted in order to learn more about our local drinking water and to characterize our exposure to contaminants. We hope to increase public awareness of water quality issues by educating the local residents about their drinking water in order to promote public health and minimize exposure to some of the contaminants contained within public water supplies.

Respuesta transcripcional de Populus a bifenilos policlorados: Aspectos aplicados a la fitorremediación

La degradación del suelo ha adquirido una magnitud preocupante. Los métodos tradicionales de descontaminación, son costosos e insuficientes. La fitorremediación representa una alternativa eficaz, de bajo coste, respetuosa con el medio ambiente, que además mejora las propiedades del suelo, si bien ha habido desarrollos relevantes en la última década. Desde el punto de vida científico, el reto principal es descifrar las rutas metabólicas implicadas en respuesta a contaminantes y comprender su regulación. Esta información es imprescindible si aspiramos a mejorar las capacidades naturales de algunas especies vegetales para remediar los suelos contaminados. Los estudios de esta Tesis se han centrado en Populus, el mejor modelo forestal disponible a raíz de la secuenciación de su genoma completo. Por otra parte, Populus tiene una gran capacidad natural para la degradación de contaminantes orgánicos, lo que explica su predominio en los programas forestales de fitorremediación que se desarrollan actualmente. Hemos elegido en concreto al híbrido Populus tremula x P. alba, por la facilidad con que se cultiva y su particular interés biotecnológico. La presente Tesis plantea un estudio comprehensivo de la respuesta molecular a bifenilos policlorados (PCBs), una familia de contaminantes orgánicos persistentes de particular relevancia a escala mundial. Se ha utilizado para ello una aproximación transcriptómica, basada en tecnología RNA-seq, para identificar los genes implicados en el metabolismo de los compuestos in planta y cuantificar sus niveles de activación en distintas situaciones controladas. La tesis pretende asimismo definir el control transcripcional subyacente a la respuesta bioquímica frente a este tipo de contaminantes. Resulta sorprendente que dicha respuesta sea prácticamente desconocida a nivel molecular, a pesar de su gran potencial aplicado en el contexto de la tecnología fitorremediadora. Para desarrollar este proyecto aplicamos a nuestros cultivos de chopo híbridos concentraciones diferentes de Aroclor 1221, una mezcla de PCBs muy utilizada a nivel comercial durante décadas, su uso está prohibido hoy internacionalmente. Y tomamos muestras de RNA a dos concentraciones y dos momentos distintos de exposición al contaminante, generando así una matriz de cuatro elementos con sus controles correspondientes. Con el fin de incrementar la especificidad de nuestro análisis, consideramos sobre todo los genes diferencialmente expresados más significativos según cuatro algoritmos estadísticos distintos. Por otra parte, realizamos análisis funcionales con herramientas bioinformáticas basadas en comparaciones de secuencias y en redes de co-expresión génica. La respuesta de los genes de particular interés fue validada mediante tecnología qRT-PCR (reacción de la polimerasa en cadena cuantitativa en tiempo real). Se trata del primer estudio comprehensivo de la respuesta de un organismo vegetal ante la presencia de PCBs. Este estudio nos ha permitido identificar una cantidad considerable de genes estructurales y reguladores, definiendo nuevos factores de transcripción cuya expresión es proporcional a la concentración de contaminante en el medio o al tiempo de exposición al mismo. Los análisis de correlación nos permiten afirmar en que la respuesta metabólica a PCBs, incluyendo posibles rutas degradadoras, participan en al menos quince factores de transcripción y unas cuarenta proteínas o enzimas que resultan particularmente inducidas. Entre las familias implicadas destacan los citocromos P450, la glutatión transferasas, las deshidrogenasas reductasas (short-chain dehydrogenase reductase) y las proteínas MDR (multi-drug resistance). Mientras que los factores de transcripción encontrados pertenecen a la familia de ZF-TF, MYBs, WRKYs entre otros. También identificamos proteínas de función desconocida que no se habían vinculado previamente a este tipo de respuestas en plantas, como la CSP (cold-shock domain proteins). Para estudiar su posible relación con la presencia de PCBs, se caracterizó un gen de esta familia detectado mediante espectrometría de masas en tándem (MS/MS) a partir de mapas IEF x SDS-PAGE (isoelectro focusing x sodium dodecyl sulphate- polyacrylamide gel electrophoresis) de alta resolución. Mediante qRT-PCR pudimos confirmar la inducción del gen correspondiente, ortólogo a PtCSP4 de P. trichocarpa (Potri.004g172600), en respuesta a Aroclor 1221. El análisis fenotípico de las líneas transgénicas de Arabidopsis thaliana que sobre-expresaba la proteína CSP de chopo híbrido confirmó un papel para la misma tolerancia a PCBs, posiblemente a través de mecanismos reguladores que activan proteínas MDR. Este trabajo, además de aportar datos novedosos sobre los mecanismos moleculares desencadenados por la presencia de un PCB en Populus, utilizado aquí como sistema modelo. Con ello se demuestra el potencial de las especies arbóreas no solo como agentes descontaminantes, ya explotado comercialmente, sino también como fuente potencial de genes interesantes. Entre los genes identificados en esta Tesis hay candidatos evidentes a participar en mecanismos de tolerancia al estrés inducido por la contaminación y también rutas metabólicas degradadores de PCBs. Precisamente la posibilidad de degradar al contaminante confiere particular interés a este tipo de estudios frente a la fitorremediación de metales pesados y otros contaminantes elementales. La comparación de los datos generados en este estudio con estudios análogos que se realicen en el futuro con otras especies y xenobióticos, contribuirán a definir mejor la respuesta de las plantas ante la contaminación orgánica y mejorar su potencial descontaminante. ABSTRACT Soil degradation has acquired a disturbing magnitude. Traditional methods of decontamination are expensive and insufficient. Phytoremediation represent an effective alternative, low cost, respectful of the environment, that also improves soil properties, although there have been relevant developments in the last decade. From a life scientist, the challenge is to decipher the major metabolic pathways involved in response to pollutants and understand their regulation. This information is essential if we desire to enhance the natural abilities of some plant species to remediate contaminated soils. This thesis studies have focused on Populus, the best available forestry model following the sequencing of the entire genome. Moreover, Populus has a natural ability to degrade organic pollutants, which explains its predominance in phytoremediation forestry programs currently being developed. We have chosen specifically to hybrid Populus tremula x P. alba, the ease with which it is grown and its particular biotechnological interest. This thesis presents a comprehensive study of the molecular response to polychlorinated biphenyls (PCBs), a family of persistent organic pollutants of particular relevance worldwide. It has been used for a transcriptomic approach using RNA-seq technology, to identify genes involved in the metabolism of compounds in plant and quantify their levels of activation in different controlled situations. The thesis also aims to define the underlying transcriptional control the biochemical response to these pollutants. It is surprising that the response is virtually unknown at the molecular level, despite its great potential applied in the context of phytoremediation technology. To develop this project we applied our hybrid poplar crops different concentrations of Aroclor 1221, a mixture of PCBs widely used commercially for decades, its use is now banned internationally. And we RNA samples at two different concentrations and times of exposure to the pollutant, generating an array of four elements with their corresponding controls. In order to increase the specificity of our analysis, we consider mainly the most significant differentially expressed genes in four different statistical algorithms. Moreover, functional analyzes conducted with bioinformatics tools based on sequence comparisons and networks gene co-expression. The response of genes of particular interest was validated by qRT-PCR (polymerase reaction chain in real-time quantitative. This is the first comprehensive study of the response of a plant organism in the presence of PCBs. This study allowed us to identify a considerable amount of structural and regulatory genes, defining new transcription factors whose expression is proportional to the concentration of contaminant in the middle or at the time of exposure. Correlation analyzes allow us to affirm that the metabolic response to PCBs, including possible degradative pathways, at least fifteen involved in transcription factors and forty proteins or enzymes which are particularly induced. Among the families involved include cytochromes P450, the glutathione transferases, dehydrogenases reductases (short -chain dehydrogenase reductase) and MDR proteins (multi - drug resistance). While transcription factors belong to the family found ZF-TF, MYBs, WRKYs among others. We also identify proteins of unknown function that had not been previously linked to such responses in plants such as CSP (cold- shock domain proteins). To study their possible relationship with the presence of PCBs, a gene in this family was characterized and was detected by tandem mass spectrometry (MS/MS) from maps IEF x SDS -PAGE (sodium dodecyl isoelectro x sulphate- polyacrylamide gel electrophoresis) of high resolution. By qRT -PCR could confirm the induction of the corresponding gene, ortholog to PtCSP4 of P. trichocarpa (Potri.004g172600), in response to Aroclor 1221. Phenotypic analysis of transgenic Arabidopsis thaliana lines over- expressing the protein CSP poplar hybrid confirmed a role for PCBs same tolerance, possibly through regulatory mechanisms activated MDR proteins. This work, in addition to providing new data on the molecular mechanisms triggered by the presence of PCBs in Populus, used here as a model system. Thus the potential of tree species not only as decontamination agents, and commercially exploited, but also as a potential source of interesting genes is shown. Among the genes identified in this thesis there are evident candidates to participate in tolerance mechanisms to stress induced by pollution and degrading metabolic pathways of PCBs. Precisely the possibility of degrading the pollutant attaches particular interest to this type of study off the phytoremediation of heavy metals and other elemental pollutants. The comparison of the data generated in this study with similar studies carried out in the future with other species and xenobiotics contribute to better define the response of plants to organic pollution and improve their decontamination potential.

Effectiveness of topical skin care provided in aged care facilities

Background The 2001 Australian census revealed that adults aged 65 years and over constituted 12.6% of the population, up from 12.1% in 1996. It is projected that this figure will rise to 21% or 5.1 million Australians by 2031. In 1998, 6% (134 000) of adults in Australia aged 65 years and over were residing in nursing homes or hostels and this number is also expected to rise. As skin ages, there is a decreased turnover and replacement of epidermal skin cells, a thinning subcutaneous fat layer and a reduced production of protective oils. These changes can affect the normal functions of the skin such as its role as a barrier to irritants and pathogens, temperature and water regulation. Generally, placement in a long-term care facility indicates an inability of the older person to perform all of the activities of daily living such as skin care. Therefore, skin care management protocols should be available to reduce the likelihood of skin irritation and breakdown and ultimately promote comfort of the older person. Objectives The objective of this review was to determine the best available evidence for the effectiveness and safety of topical skin care regimens for older adults residing in long-term aged care facilities. The primary outcome was the incidence of adverse skin conditions with patient satisfaction considered as a secondary outcome. Search strategy A literature search was performed using the following databases: PubMed (NLM) (1966–4/2003), Embase (1966–4/2003), CINAHL (1966–4/2003), Current Contents (1993–4/2003), Cochrane Library (1966–2/2003), Web of Science (1995–12/2002), Science Citation Index Expanded and ProceedingsFirst (1993–12/2002). Health Technology Assessment websites were also searched. No language restrictions were applied. Selection criteria Systematic reviews of randomised controlled trials, randomised and non-randomised controlled trials evaluating any non-medical intervention or program that aimed to maintain or improve the integrity of skin in older adults were considered for inclusion. Participants were 65 years of age or over and residing in an aged care facility, hospital or long-term care in the community. Studies were excluded if they evaluated pressure-relieving techniques for the prevention of skin breakdown. Data collection and analysis Two independent reviewers assessed study eligibility for inclusion. Study design and quality were tabulated and relative risks, odds ratios, mean differences and associated 95% confidence intervals were calculated from individual comparative studies containing count data. Results The resulting evidence of the effectiveness of topical skin care interventions was variable and dependent upon the skin condition outcome being assessed. The strongest evidence for maintenance of skin condition in incontinent patients found that disposable bodyworn incontinence protection reduced the odds of deterioration of skin condition compared with non-disposable bodyworns. The best evidence for non-pressure relieving topical skin care interventions on pressure sore formation found the no-rinse cleanser Clinisan to be more effective than soap and water at maintaining healthy skin (no ulcers) in elderly incontinent patients in long-term care. The quality of studies examining the effectiveness of topical skin care interventions on the incidence of skin tears was very poor and inconclusive. Topical skin care for prevention of dermatitis found that Sudocrem could reduce the redness of skin compared with zinc cream if applied regularly after each pad change, but not the number of lesions. Topical skin care on dry skin found the Bag Bath/Travel Bath no-rinse skin care cleanser to be more effective at preventing overall skin dryness and most specifically flaking and scaling when compared with the traditional soap and water washing method in residents of a long-term care facility. Information on the safety of topical skin care interventions is lacking. Therefore, because of the lack of evidence, no recommendation on the safety on any intervention included in this review can be made.

A systematic review of topical skin care in aged care facilities

This systematic review aimed to evaluate the best available evidence regarding the effectiveness of topical skin care interventions for residents of aged care facilities. Introduction. Natural changes to skin, as well as increased predisposition to pressure sores and incontinence, means residents of aged care facilities readily require topical skin care. A range of interventions exist that aim to maintain or improve the integrity of skin of older adults. Methods. Pubmed, Embase, Current Contents, CINAHL and The Cochrane Library databases were searched, as well as Health Technology Assessment websites up to April 2003. Systematic reviews and randomized or non-randomized controlled trials were evaluated for quality and data were independently extracted by two reviewers. Results. The effectiveness of topical skin interventions was variable and dependent on the skin condition being treated. Studies examined the effectiveness of washing products on incontinence irritated skin. Disposable bodyworns may prevent deterioration of skin condition better than non-disposable underpads or bodyworns. Clinisan, a no-rinse cleanser may reduce the incidence of incontinence associated pressure ulcers when compared with soap and water. Conclusion. In general the quality of evidence for interventions to improve or maintain the skin condition in the older person was poor and more research in this area is needed. Relevance to Clinical Practice. Skin care is a major issue for nurses working with older people. On the basis of this review no clear recommendations can be made. This lack of strong evidence for nurses to base effective practice decisions is problematic. However, the 'best' evidence suggests that disposable bodyworns are a good investment in the fight against skin deterioration. No rinse cleansers are to be preferred over soap and the use of the bag bath appears to be a useful practice to reduce the risk of dry skin ( a risk factor for breaches in skin integrity).

Editorial

This special issue of the Journal of the Operational Research Society is dedicated to papers on the related subjects of knowledge management and intellectual capital. These subjects continue to generate considerable interest amongst both practitioners and academics. This issue demonstrates that operational researchers have many contributions to offer to the area, especially by bringing multi-disciplinary, integrated and holistic perspectives. The papers included are both theoretical as well as practical, and include a number of case studies showing how knowledge management has been implemented in practice that may assist other organisations in their search for a better means of managing what is now recognised as a core organisational activity. It has been accepted by a growing number of organisations that the precise handling of information and knowledge is a significant factor in facilitating their success but that there is a challenge in how to implement a strategy and processes for this handling. It is here, in the particular area of knowledge process handling that we can see the contributions of operational researchers most clearly as is illustrated in the papers included in this journal edition. The issue comprises nine papers, contributed by authors based in eight different countries on five continents. Lind and Seigerroth describe an approach that they call team-based reconstruction, intended to help articulate knowledge in a particular organisational. context. They illustrate the use of this approach with three case studies, two in manufacturing and one in public sector health care. Different ways of carrying out reconstruction are analysed, and the benefits of team-based reconstruction are established. Edwards and Kidd, and Connell, Powell and Klein both concentrate on knowledge transfer. Edwards and Kidd discuss the issues involved in transferring knowledge across frontières (borders) of various kinds, from those borders within organisations to those between countries. They present two examples, one in distribution and the other in manufacturing. They conclude that trust and culture both play an important part in facilitating such transfers, that IT should be kept in a supporting role in knowledge management projects, and that a staged approach to this IT support may be the most effective. Connell, Powell and Klein consider the oft-quoted distinction between explicit and tacit knowledge, and argue that such a distinction is sometimes unhelpful. They suggest that knowledge should rather be regarded as a holistic systemic property. The consequences of this for knowledge transfer are examined, with a particular emphasis on what this might mean for the practice of OR Their view of OR in the context of knowledge management very much echoes Lind and Seigerroth's focus on knowledge for human action. This is an interesting convergence of views given that, broadly speaking, one set of authors comes from within the OR community, and the other from outside it. Hafeez and Abdelmeguid present the nearest to a 'hard' OR contribution of the papers in this special issue. In their paper they construct and use system dynamics models to investigate alternative ways in which an organisation might close a knowledge gap or skills gap. The methods they use have the potential to be generalised to any other quantifiable aspects of intellectual capital. The contribution by Revilla, Sarkis and Modrego is also at the 'hard' end of the spectrum. They evaluate the performance of public–private research collaborations in Spain, using an approach based on data envelopment analysis. They found that larger organisations tended to perform relatively better than smaller ones, even though the approach used takes into account scale effects. Perhaps more interesting was that many factors that might have been thought relevant, such as the organisation's existing knowledge base or how widely applicable the results of the project would be, had no significant effect on the performance. It may be that how well the partnership between the collaborators works (not a factor it was possible to take into account in this study) is more important than most other factors. Mak and Ramaprasad introduce the concept of a knowledge supply network. This builds on existing ideas of supply chain management, but also integrates the design chain and the marketing chain, to address all the intellectual property connected with the network as a whole. The authors regard the knowledge supply network as the natural focus for considering knowledge management issues. They propose seven criteria for evaluating knowledge supply network architecture, and illustrate their argument with an example from the electronics industry—integrated circuit design and fabrication. In the paper by Hasan and Crawford, their interest lies in the holistic approach to knowledge management. They demonstrate their argument—that there is no simple IT solution for organisational knowledge management efforts—through two case study investigations. These case studies, in Australian universities, are investigated through cultural historical activity theory, which focuses the study on the activities that are carried out by people in support of their interpretations of their role, the opportunities available and the organisation's purpose. Human activities, it is argued, are mediated by the available tools, including IT and IS and in this particular context, KMS. It is this argument that places the available technology into the knowledge activity process and permits the future design of KMS to be improved through the lessons learnt by studying these knowledge activity systems in practice. Wijnhoven concentrates on knowledge management at the operational level of the organisation. He is concerned with studying the transformation of certain inputs to outputs—the operations function—and the consequent realisation of organisational goals via the management of these operations. He argues that the inputs and outputs of this process in the context of knowledge management are different types of knowledge and names the operation method the knowledge logistics. The method of transformation he calls learning. This theoretical paper discusses the operational management of four types of knowledge objects—explicit understanding; information; skills; and norms and values; and shows how through the proposed framework learning can transfer these objects to clients in a logistical process without a major transformation in content. Millie Kwan continues this theme with a paper about process-oriented knowledge management. In her case study she discusses an implementation of knowledge management where the knowledge is centred around an organisational process and the mission, rationale and objectives of the process define the scope of the project. In her case they are concerned with the effective use of real estate (property and buildings) within a Fortune 100 company. In order to manage the knowledge about this property and the process by which the best 'deal' for internal customers and the overall company was reached, a KMS was devised. She argues that process knowledge is a source of core competence and thus needs to be strategically managed. Finally, you may also wish to read a related paper originally submitted for this Special Issue, 'Customer knowledge management' by Garcia-Murillo and Annabi, which was published in the August 2002 issue of the Journal of the Operational Research Society, 53(8), 875–884.

A methodology for evaluating and selecting processes for natural gas conditioning

The aim of this work was to develop a generic methodology for evaluating and selecting, at the conceptual design phase of a project, the best process technology for Natural Gas conditioning. A generic approach would be simple and require less time and would give a better understanding of why one process is to be preferred over another. This will lead to a better understanding of the problem. Such a methodology would be useful in evaluating existing, novel and hybrid technologies. However, to date no information is available in the published literature on such a generic approach to gas processing. It is believed that the generic methodology presented here is the first available for choosing the best or cheapest method of separation for natural gas dew-point control. Process cost data are derived from evaluations carried out by the vendors. These evaluations are then modelled using a steady-state simulation package. From the results of the modelling the cost data received are correlated and defined with respect to the design or sizing parameters. This allows comparisons between different process systems to be made in terms of the overall process. The generic methodology is based on the concept of a Comparative Separation Cost. This takes into account the efficiency of each process, the value of its products, and the associated costs. To illustrate the general applicability of the methodology, three different cases suggested by BP Exploration are evaluated. This work has shown that it is possible to identify the most competitive process operations at the conceptual design phase and illustrate why one process has an advantage over another. Furthermore, the same methodology has been used to identify and evaluate hybrid processes. It has been determined here that in some cases they offer substantial advantages over the separate process techniques.

V-Commerce: Vending Machine Technology

A Popular auxiliary service provided by hospitality businesses is automatic merchandising, more commonly known as vending. Recent advancement in vending technology (v-commerce) has changed the way vending machines are monitored, replenished, maintained, and reconciled. As the hospitality industry searches to reduce its reliance on labor intensive processes, automatic merchandising represents and effective way to provide unattended points of sale and service. Smart machines featuring quality products with high levels of auditabile control may me more appealing to the hospitality industry. While a hospitality manager does not need to have knowleds of the vending distribution channel or machine maintenance, it is important to understand available technology and the opportunity it provides for operational efficiencies and revenue enhancement.