Red-Emitting Polyfluorenes Grafted with Quinoline-Based Iridium Complex: "Simple Polymeric Chain, Unexpected High Efficiency"

A series of red-light emitting electrophosphorescent polyfluorenes (PFs) with varying content of a quinoline-based iridium complex, (PPQ)(2)Ir(acac) (bis(2,4-diphenylquinolyl-N,C-2') iridium(acetylacetonate)), in the side chain are synthesized by Suzuki polycondensation. Because of the efficient Forster energy transfer from the PF main chain to (PPQ)(2)Ir(acac) and direct charge trapping on the complex, the electroluminescent emission from PF is nearly completely quenched, even though the amount of iridium complex I incorporated into the polymers is as low as 1 mol %. Based on a single-layer device configuration, a luminous efficiency of up to 5.0 cd A(-1) with a luminance of 2000 cd m(-2) and Commission Internationale de L'Eclairage coordinates of (0.63, 0.35) (x, y) is realized, which is far superior to that of previously reported red-light emitting PFs containing benzothiazole- and isoquinoline-based iridium complexes.

Synthesis and Spectrum of Novel Pyrazoline Fluorescent Compounds

Pyrazoline derivatives have been used widely in dyeing industry as fluorescent whitening agents due to their excellent capability. According to Schellhammer theory of the relation between chemical structure and fluorescent quality, six new fluorescent compounds were designed and synthesized which contained the benzothiazole group in the I-pyrazoline, the indole group in the 3-pyrazoline and the derivatives of phenyl in the 5-pyrazoline. The structure of target compounds was confirmed by IR, H-1 NMR, MS and elementary analysis. The fluorescence spectra showed that these compounds had good fluorescence. They could absorb ultraviolet light at near 353 nm. The fluorescence maximum emission wavelengths were about 430-443 nm. It was a kind of promising fluorescence compounds. The largest fluorescence emission wavelength and the fluorescence intensity were related to the substituted group of the compounds. When the 6-Br group was introduced into benzothiazole, the fluorescence emission wavelength exhibited a blue shift, and the fluorescence intensity increased.

Synthesis, characterization and ring-opening polymerization of cyclic (arylene phosphonate) oligomers

A series of cyclic (arylene phosphonate) oligomers were prepared by reaction of phenylphosphonic dichloride (PPD) with various bisphenols under pseudo-high dilution conditions via interfacial polycondensation. The yield of cyclic (arylene phosphonate) oligomers is over 85% by using hexadecyltrimethylammonium bromide as phase transfer catalyst (PTC) at 0 degreesC. The structures of the cyclic oligomers were confirmed by a combination of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS) and IR analysis. These cyclic oligomers undergo facile ring-opening polymerization in the melt by using potassium 4,4'-biphenoxide as the initiator to give linear polyphosphonate. Free-radical ring-opening polymerization of cyclic(arylene phosphonate) oligomers containing sulfur linkages was also performed in the melt using 2,2'-dithiobis(benzothiazole) (DTB) as the initiator at 270degreesC and the resulting polymer had a M-w of 8 x 10(3) with a molecular weight distribution of 4. Ring-opening copolymerization of these cyclic oligomers with cyclic carbonate oligomers was also achieved. The average molecular weight of the resulting copolymer is higher than the corresponding, homopolymer and the thermal stability of the copolymer is better than the corresponding homopolymer.

Simultaneous determination of 2-aminothiazole, 2-aminobenzothiazole and 2-mercaptobenzothiazole by capillary electrophoresis with end-column amperometric detection

Capillary electrophoresis with amperometric detection is evaluated for the simultaneous determination of 2-aminothiazole (A), 2-amino-benzothiazole (AB), 2-mercaptobenzothiazole (AM). The cyclic voltammogram, hydrodynamic voltammogram, effect of pH, concentration of buffer and separation voltage on the separation and the detection were studied. The conditions were optimized as follows: 50 mM phosphate buffet; pH 6.0, 2s at 17.5 kV sample injection, separation at 17.5 kV, 1.2 V as detection potential. The method provided low detection limit as 0.5 mu M, 0.05 mu M and 0.01 mu M, wide linear range 2-200 mu M, 10-200 mu M and 0.025-100 mu M for A, AB, and AM, respectively. The variations in peak current and migration time for 15 consecutive injections of a standard containing 5 mu M each compound were 3.7, 2.1, and 3.9%, and 1.2, 0.8, and 1.2%, for A, AB and AM, respectively. This method was employed to analyze river water.

Synthesis and molecular structures of di- and trinuclear molybdenum complexes containing pyridine-2-thiolato (pyS) ligand

Dinuclear complexes [Mo-2(mu-pyS)(2)(CO)(4)(PPh(3))(2)] (1), [Mo-2(mu-pyS)(2)(CO)(5)(PPh(3))] (2) and a trace quality of trinuclear complex [Mo-3(mu-pyS)(2)(mu(3)-pyS)(2)(CO)(6)] (3) were obtained from the reaction of [Mo(CO)(3)(MeCN)(3)] with pyridine-2-thione (pySH) and PPh(3) in THF. The crystal structures of 1.2C(7)H(8) and 3.7 C7H8 have been determined by X-ray diffraction studies. Crystals of 1.2C(7)H(8) are monoclinic, space group C2/c and Z = 4, with a = 18.797(3), b = 11.143(4), c = 28.157(7) Angstrom, beta = 101.23(2)degrees. The structure was refined to R = 0.050 and Rw = 0.057 for 3146 observed reflections, Crystals of 3.7 C7H8 are monoclinic, space group P2(1)/a and Z = 4, with a = 13.912(2), b = 17.161(2), c = 15.577(3) Angstrom, beta = 101.17(1)degrees. The structure was refined to R = 0.046 and Rw = 0.051 for 4357 observed reflections. The molecule of 1 consists of two Mo(CO)(2)(PPh(3)) fragments linked by an Mo-Mo bond (2.974(2)Angstrom) and by two doubly-bridging pyS ligands. The compound 3 contains a bent open geometry of three molybdenum atoms (Mo(1)-Mo(2)-Mo(3) angle 122.99(3)degrees) linked by two Mo-Mo bonds (2.943(1) and 2.950(1) Angstrom) and by two doubly- and two triply-bridging pyS ligands.

Synthesis of heterosulfamates. Search for structure-taste relationships

Thirty one new sodium heterosulfamates, RNHSO3Na, where the R portion contains mainly thiazole, benzothiazole, thiadiazole and pyridine ring structures, have been synthesized and their taste portfolios have been assessed. A database of 132 heterosulfamates ( both open-chain and cyclic) has been formed by combining these new compounds with an existing set of 101 heterosulfamates which were previously synthesized and for which taste data are available. Simple descriptors have been obtained using (i) measurements with Corey-Pauling-Koltun (CPK) space- filling models giving x, y and z dimensions and a volume VCPK, (ii) calculated first order molecular connectivities ((1)chi(v)) and (iii) the calculated Spartan program parameters to obtain HOMO, LUMO energies, the solvation energy E-solv and V-SPART AN. The techniques of linear (LDA) and quadratic (QDA) discriminant analysis and Tree analysis have then been employed to develop structure-taste relationships (SARs) that classify the sweet (S) and non-sweet (N) compounds into separate categories. In the LDA analysis 70% of the compounds were correctly classified ( this compares with 65% when the smaller data set of 101 compounds was used) and in the QDA analysis 68% were correctly classified ( compared to 80% previously). TheTree analysis correctly classified 81% ( compared to 86% previously). An alternative Tree analysis derived using the Cerius2 program and a set of physicochemical descriptors correctly classified only 54% of the compounds.

Intrachain Energy Migration to Weak Charge-Transfer State in Polyfluorene End-Capped with Naphthalimide Derivative

Polyfluorene end-capped with N-(2-benzothiazole)-1 8-naphthalimide (PF-BNI) is a highly fluorescent material with fluorescence emission modulated by solvent polarity Its low energy excited state is assigned as a mixed configuration state between the singlet S(1) of the fluorene backbone (F) with the charge transfer (CI) of the end group BNI The triexponential fluorescence decays of PF-BNI were associated with fast energy migration to form an intrachain charge-transfer (ICCT) state polyfluorene backbone decay and ICCT deactivation Time-resolved fluorescence anisotropy exhibited biexponential relaxation with a fast component of 12-16 ps in addition to a slow one in the range 0 8-1 4 ns depending on the solvent showing that depolarization occurs from two different processes energy migration to form the ICCT state and slow rotational diffusion motion of end segments at a longer time Results from femtosecond transient absorption measurements agreed with anisotropy decay and showed a decay component of about 16 ps at 605 nm in PF BNI ascribed to the conversion of S(1) to the ICCT excited state From the ratio of asymptotic and initial amplitudes of the transient absorption measurement the efficiency of intrachain ICCT formation is estimated in 0 5 which means that on average, half of the excited state formed in a BNI-(F)(n)-BNI chain with n = 32 is converted to its low energy intrachain charge-transfer (ICCT) state

The structural origin and biological function of pH-sensitivity in firefly luciferases

Firefly luciferases are called pH-sensitive because their bioluminescence spectra display a typical red-shift at acidic pH, higher temperatures, and in the presence of heavy metal cations, whereas other beetle luciferases (click beetles and railroadworms) do not, and for this reason they are called pH-insensitive. Despite many studies on firefly luciferases, the origin of pH-sensitivity is far from being understood. This subject is revised in view of recent results. Some substitutions of amino-acid residues influencing pH-sensitivity in firefly luciferases have been identified. Sequence comparison, site-directed mutagenesis and modeling studies have shown a set of residues differing between pH-sensitive and pH-insensitive luciferases which affect bioluminescence colors. Some substitutions dramatically affecting bioluminescence colors in both groups of luciferases are clustered in the loop between residues 223-235 (Photinus pyralis sequence). A network of hydrogen bonds and salt bridges involving the residues N229-S284-E311-R337 was found to be important for affecting bioluminescence colors. It is suggested that these structural elements may affect the benzothiazolyl side of the luciferin-binding site affecting bioluminescence colors. Experimental evidence suggest that the residual red light emission in pH-sensitive luciferases could be a vestige that may have biological importance in some firefly species. Furthermore, the potential utility of pH-sensitivity for intracellular biosensing applications is considered. © The Royal Society of Chemistry and Owner Societies.

Free radical scavenging activity of Kielmeyera variabilis (Clusiaceae)

As part of our ongoing research on antioxidant agents from Brazilian flora, we screened the free radical scavenging activity of two extracts and eight fractions of Kielmeyera variabilis (Clusiaceae) using DPPH (2,2-diphenyl-1- picrylhydrazyl-hydrate) and ABTS+ [2,2'-azinobis(3- ethylenebenzothiazoline-6-sulfonic acid)] colorimetric assays. The ethyl acetate and n-butanol fractions of the leaves of K. variabilis displayed the strongest activity (IC50 of 3.5 ± 0.3 and 4.4 ± 0.2 μg mL -1 for DPPH and 6.6 ± 0.4 and 3.1 ± 0.1 μg mL -1 for ABTS+, respectively). Chromatographic fractionation of the most potent fractions led to identification of three flavonols with previously described antioxidant activity, quercitrin (1), quercetin-3-O- glucoside (3), and quercetin-3-O-galactoside (4), and of one biflavone, podocarpusflavone A (2). This is the first time that the presence of these flavonoids in Kielmeyera variabilis has been reported. © 2013 by the authors.

Benzothiazoliumsalze als Photoinitiatoren für kationische Epoxidpolymerisationen

In dieser Arbeit wurden neuartige substituierte N-Benzylbenzothiazoliumhexa-fluorophosphate und –antimonate synthetisiert und hinsichtlich ihre Wirksamkeit als photo- und thermolatente Initiatoren für Epoxidpolymerisationen untersucht. Zur Synthese der Benzothiazoliumderivate wurden zunächst substituierte Benzothiazole nach verschiedenen Verfahren hergestellt, diese mit den entsprechenden Benzylbromiden quaternisiert und die N-quaternären Bromide zu den Hexafluorophosphaten bzw. –antimonaten umgesalzt. Neben den niedermolekularen Benzothiazoliumsalzen wurden auch Copolymere mit dieser Struktur in der Seitenkette durch radikalische Copolymerisation vinylsubstituierter N-quaternärer Benzothiazoliumsalze mit MMA hergestellt. Sowohl die niedermolekularen als auch die polymergebundenen Benzothiazoliumhexafluorophosphate erwiesen sich als effektive direkte kationische Photo- und Thermoinitiatoren für die Polymerisation von Epoxiden. Durch die Einführung auxochromer Ethergruppierungen konnte eine bathochrome Verschiebung der UV-Absorptionswellenlänge des energieärmsten elektronischen Überganges erreicht werden. Kinetische IR-Studien der kationischen Polymerisation von Glycidylphenylether (GPE) im Nassfilm unter Bestrahlung in Gegenwart der hergestellten Benzothiazoliumsalze als Photoinitiatoren zeigten dass durch die so erreichte verbesserte Ausnutzung der einwirkenden Strahlung die kationische Photoinitiatoreffektivität deutlich gesteigert werden konnte. Der Zusatz eines photolytischen Radikalbildners führte zu einer weiteren Steigerung der Photopolymerisationsgeschwindigkeit und zu einer Umkehr der beobacheteten Initiatoreffektivitäten. UV-, 1H NMR-, sowie MALDI-TOF- Untersuchungen, sowie die vollständige Unterdrückung der Photopolymerisation durch den Protonenfänger DBP deuten auf die photolytische Generierung von Protonen als initiierende Spezies der photokationischen Polymerisation und DSC- und 1H-NMR Ergebnisse auf die thermische Generierung von Benzylkationen als initiierende Spezies der thermischen Polymerisation hin.

Synthese, Charakterisierung und Testung von Phenylacrylsäure-Derivaten, Benzothiazolen und Diarylthioethern als potentielle Inhibitoren der Dengue-Virus-Typ-2-NS2B-NS3-Protease

Dengue-Fieber ist eine durch Stechmücken der Gattungen Aedes aegypti und Aedes albopticus übertragene, virale Infektionskrankheit des Menschen, welche eine zunehmende Bedrohung für die Weltbevölkerung darstellt; das Infektionsrisiko betrifft vorwiegend Menschen, die in tropischen und subtropischen Gebieten der Erde (Asien, Afrika, Amerika) leben. Bei dem Erreger handelt es sich um ein Flavivirus, bestehend aus einer positiv polarisierten Einzelstrang-RNA, welches in vier verschiedenen Serotypen existiert. Eine Infektion mit Dengue-Viren zeigt sich durch drei mögliche Krankheitsbilder: Klassisches Dengue-Fieber (DF), hämorrhagisches Dengue-Fieber (DHF) oder Dengue-Schock-Syndrom (DSS). Das Dengue-Virus-Genom codiert eine Serin-Protease mit einer klassischen katalytischen Triade, bestehend aus den Aminosäuren His51, Asp75 und Ser135. Die Funktion der Dengue-Virus-Protease besteht in der post-translationalen, proteolytischen Prozessierung des viralen Polyprotein-Vorläufers, womit sie essentiell für die Virus-Replikation ist und damit einen wichtigen therapeutischen Ansatz für die Entwicklung neuer Wirkstoffe gegen Dengue-Fieber darstellt. Die Ziele der vorliegenden Arbeit bestanden darin, neue potentielle Inhibitoren der Dengue-Virus Typ 2 NS2B-NS3 Protease (DEN-2 NS2B-NS3pro) zu synthetisieren, deren Hemmwirkung sowie den Inhibitionstyp mithilfe fluorimetrischer Enzym-Assays zu bestimmen, Struktur-Wirkungs-Beziehungen (u.a. mithilfe von Molecular Docking-Rechnungen) zu analysieren und die erhaltenen Leitstrukturen zu optimieren. In der vorliegenden Arbeit wurden zwei Substanzklassen und damit zwei Teilprojekte behandelt: Phenylacrylsäureamide im ersten Teilprojekt, Benzothiazole und Diarylthioether zusammen im zweiten Teilprojekt. Im ersten Teilprojekt zeigten einige Phenylacrylsäureamide eine schwache Hemmung der DEN-2 NS2B-NS3pro zwischen ca. 50 und 61 % bei einer Inhibitorkonzentration von 50 µM sowie eine nicht-kompetitive Hemmung, welche jedoch durch vielfältige Derivatisierung kaum verändert oder verbessert werden konnte. Darüber hinaus wurden die endogenen Serin-Proteasen alpha-Chymotrypsin und Trypsin durch einige Phenylacrylsäureamide erheblich stärker gehemmt als die DEN-2 NS2B-NS3pro. Das zweite Teilprojekt befasste sich mit der Synthese und Testung von Diarylthioethern mit hydroxy-substituierten Benzothiazol-Bausteinen sowie der Testung einiger methoxy-substituierter Synthese-Vorstufen der Endverbindungen, um die Relevanz und den Einfluss der einzelnen Bausteine auf die Hemmung der DEN-2 NS2B-NS3pro zu untersuchen. Der in der vorliegenden Arbeit synthetisierte, potenteste Inhibitor der DEN-2 NS2B-NS3pro (Hemmung: 90 % [50 µM]; IC50 = 3.6 +/- 0.11 µM) und der DEN-3 NS2B-NS3pro (Hemmung: >99 % [100 µM]; IC50 = 9.1 +/- 1.02 µM), SH65, ein Diarylthioether-Benzothiazol-Derivat, entstand aufgrund der Vorhersage zweier möglicher Bindungsmodi (kompetitiv und nicht-kompetitiv) mithilfe von Molecular Docking-Experimenten an der Röntgen-Kristall-struktur der DEN-3 NS2B-NS3pro (PDB-Code: 3U1I). Nach experimenteller Bestimmung der IC50-Werte bei unterschiedlichen Substratkonzentrationen erwies sich SH65 jedoch als nicht-kompetitiver Inhibitor der DEN-2 NS2B-NS3pro. Trypsin wurde von SH65 vergleichbar stark gehemmt (96% [50 µM]; IC50 = 6.27 +/- 0.68 µM) wie die beiden getesteten Dengue-Virus-Proteasen, nicht jedoch alpha-Chymotrypsin (nur 21% Hemmung bei 50 µM), wodurch diesem Inhibitor zumindest eine relative Selektivität gegenüber Serin-Proteasen zugeschrieben werden kann. SH65 zeigte lediglich Protease-Hemmung in den Enzym-Assays, jedoch keine antivirale Aktivität bei der Testung an Dengue-Virus-infizierten Zellen, was aber wiederum bei der synthetisierten Vorstufe von SH65, welche anstelle der beiden Hydroxy-Gruppen über Methoxy-Gruppen verfügt, der Fall war. Diarylthioether mit mehrfach hydroxy-substituiertem Benzothiazol-Baustein stellen hiermit eine neue, vielversprechende Wirkstoffgruppe zur Hemmung sowohl der Dengue-Virus Typ 2- als auch der Dengue-Virus Typ 3 NS2B-NS3 Protease dar.

Synthesis and biological evaluation of nonpeptide mimetics of co-conotoxin GVIA

A benzothiazole-derived compound (4a) designed to mimic the C-alpha-C-beta bond vectors and terminal functionalities of Lys2, TyrI3 and Arg17 in omega-conotoxin GVIA was synthesised, together with analogues (4b-d), which had each side-chain mimic systematically truncated or eliminated. The affinity of these compounds for rat brain N-type and P/Q-type voltage gated calcium channels (VGCCs) was determined. In terms of N-type channel affinity and selectivity, two of these compounds (4a and 4d) were found to be highly promising, first generation mimetics of omega-conotoxin. The fully functionalised mimetic (4a) showed low PM binding affinity to N-type VGCCs (IC50 = 1.9 muM) and greater than 20-fold selectivity for this channel sub-type over P/Q-type VGCCs, whereas the mimetic in which the guanidine-type side chain was truncated back to an amine (4d, IC50 = 4.1 muM) showed a greater than 25-fold selectivity for the N-type channel. (C) 2004 Elsevier Ltd. All rights reserved.

Synthesis and biological properties of 2-phenylbenzothiazole derivatives

2-Phenylbenzothiazoles have structural similarities to the antioestrogenic 2-phenylindole, zindoxifene and to the oestrogenic isoflavone, genistein which also inhibits tyrosine kinases. Hydroxylated 2-phenylbenzothiazole derivatives were therefore produced and tested for oestrogenic and tyrosine kinase inhibitory activity. Synthesis of methoxy substituted 2-phenylbenzothiazoles was via the Jacobson method, demethylation being effected by boron tribromide at -70oC. Three amino substituted 2-phenylbenzothiazoles were also synthesised and tested for activity. Data is presented for oestrogen receptor binding activity, aromatase inhibitory activity, epidermal growth factor receptor tyrosine kinase (EGFRTK) inhibitory activity and cytotoxicity to ANN-1, 3T3, MCF-7 and WIDR cells. Oestrogen receptor binding affinity (RBA) was shown by five of the nine compounds tested. 2-(4-hydroxy)-6-hydroxybenzo-thiazole was the most active of the benzothiazoles tested (RBA 0.7). This is low but comparable to that of genistein. EGFRTK inhibitory activity was shown by four of the six benzothiazole derivatives tested; activity was comparable to that of genistein. Cytotoxicity assays have shown no selective toxicity of 2-phenylbenzothiazoles to any of the cell lines tested. Toxicity to MCF-7 cells was similar to that for other cell lines despite some compounds showing oestrogen receptor binding capacity. Amino-substituted 2-phenylbenzothiazoles showed selective toxicity towards transformed ANN-1 cells compared to normal 3T3 cells but the mechanism of this selectivity has not been established. Molecular modelling techniques, including CHEM-X, QUANTA and MOPAC were used to compare known ATP-competitive tyrosine kinase inhibitors with a model of ATP built from the crystal structure of the ATP-phosphoglycerate kinase complex. Structural features thought to be important to kinase inhibition were found and used to suggest further 2-phenylbenzothiazole analogues which may have improved activity.