Field Testing a Full-Scale Tidal Turbine Part 3: Acoustic Characteristics

Like any new technology, tidal power converters are being assessed for potential environmental impacts. Similar to wind power, where noise emissions have led to some regulations and limitations on consented installation sites, noise emissions of these new tidal devices attract considerable attention, especially due to the possible interaction with the marine fauna. However, the effect of turbine noise cannot be assessed as a stand-alone issue, but must be investigated in the context of the natural background noise in high flow environments. Noise measurements are also believed to be a useful tool for monitoring the operating conditions and health of equipment. While underwater noise measurements are not trivial to perform, this non-intrusive mon- itoring method could prove to be very cost effective. This paper presents sound measurements performed on the SCHOTTEL Instream Turbine as part of the MaRINET testing campaign at the QUB tidal test site in Portaferry during the summer of 2014. This paper demonstrates a comparison of the turbine noise emissions with the normal background noise at the test site and presents possible applications as a monitoring system.

Predicting performance on fluid intelligence from speed of processing, working memory, and controlled attention

Fluid inteliigence has been defined as an innate ability to reason which is measured commonly by the Raven's Progressive Matrices (RPM). Individual differences in fluid intelligence are currently explained by the Cascade model (Fry & Hale, 1996) and the Controlled Attention hypothesis (Engle, Kane, & Tuholski, 1999; Kane & Engle, 2002). The first theory is based on a complex relation among age, speed, and working memory which is described as a Cascade. The alternative to this theory, the Controlled Attention hypothesis, is based on the proposition that it is the executive attention component of working memory that explains performance on fluid intelligence tests. The first goal of this study was to examine whether the Cascade model is consistent within the visuo-spatial and verbal-numerical modalities. The second goal was to examine whether the executive attention component ofworking memory accounts for the relation between working memory and fluid intelligence. Two hundred and six undergraduate students between the ages of 18 and 28 completed a battery of cognitive tests selected to measure processing speed, working memory, and controlled attention which were selected from two cognitive modalities, verbalnumerical and visuo-spatial. These were used to predict performance on two standard measures of fluid intelligence: the Raven's Progressive Matrices (RPM) and the Shipley Institute of Living Scales (SILS) subtests. Multiple regression and Structural Equation Modeling (SEM) were used to test the Cascade model and to determine the independent and joint effects of controlled attention and working memory on general fluid intelligence. Among the processing speed measures only spatial scan was related to the RPM. No other significant relations were observed between processing speed and fluid intelligence. As 1 a construct, working memory was related to the fluid intelligence tests. Consistent with the predictions for the RPM there was support for the Cascade model within the visuo-spatial modality but not within the verbal-numerical modality. There was no support for the Cascade model with respect to the SILS tests. SEM revealed that there was a direct path between controlled attention and RPM and between working memory and RPM. However, a significant path between set switching and RPM explained the relation between controlled attention and RPM. The prediction that controlled attention mediated the relation between working memory and RPM was therefore not supported. The findings support the view that the Cascade model may not adequately explain individual differences in fluid intelligence and this may be due to the differential relations observed between working memory and fluid intelligence across different modalities. The findings also show that working memory is not a domain-general construct and as a result its relation with fluid intelligence may be dependent on the nature of the working memory modality.

An Investigation of the Role of Attention in the Cross-Race Effect: An Ecological Approach

The current set of studies was conducted to examine the cross-race effect (CRE), a phenomenon commonly found in the face perception literature. The CRE is evident when participants display better own-race face recognition accuracy than other-race recognition accuracy (e.g. Ackerman et al., 2006). Typically the cross-race effect is attributed to perceptual expertise, (i.e., other-race faces are processed less holistically; Michel, Rossion, Han, Chung & Caldara, 2006), and the social cognitive model (i.e., other-race faces are processed at the categorical level by virtue of being an out-group member; Hugenberg, Young, Bernstein, & Sacco, 2010). These effects may be mediated by differential attention. I investigated whether other-race faces are disregarded and, consequently, not remembered as accurately as own-race (in-group) faces. In Experiment 1, I examined how the magnitude of the CRE differed when participants learned individual faces sequentially versus when they learned multiple faces simultaneously in arrays comprising faces and objects. I also examined how the CRE differed when participants recognized individual faces presented sequentially versus in arrays of eight faces. Participants’ recognition accuracy was better for own-race faces than other-race faces regardless of familiarization method. However, the difference between own- and other-race accuracy was larger when faces were familiarized sequentially in comparison to familiarization with arrays. Participants’ response patterns during testing differed depending on the combination of familiarization and testing method. Participants had more false alarms for other-race faces than own-race faces if they learned faces sequentially (regardless of testing strategy); if participants learned faces in arrays, they had more false alarms for other-race faces than own-races faces if ii i they were tested with sequentially presented faces. These results are consistent with the perceptual expertise model in that participants were better able to use the full two seconds in the sequential task for own-race faces, but not for other-race faces. The purpose of Experiment 2 was to examine participants’ attentional allocation in complex scenes. Participants were shown scenes comprising people in real places, but the head stimuli used in Experiment 1 were superimposed onto the bodies in each scene. Using a Tobii eyetracker, participants’ looking time for both own- and other-race faces was evaluated to determine whether participants looked longer at own-race faces and whether individual differences in looking time correlated with individual differences in recognition accuracy. The results of this experiment demonstrated that although own-race faces were preferentially attended to in comparison to other-race faces, individual differences in looking time biases towards own-race faces did not correlate with individual differences in own-race recognition advantages. These results are also consistent with perceptual expertise, as it seems that the role of attentional biases towards own-race faces is independent of the cognitive processing that occurs for own-race faces. All together, these results have implications for face perception tasks that are performed in the lab, how accurate people may be when remembering faces in the real world, and the accuracy and patterns of errors in eyewitness testimony.

Analysis of the Ethical, Social and Legal Issues Related to the Delivery of the Prenatal Genetic Testing in Argentina

L'introduction de nouvelles biotechnologies dans tout système de soins de santé est un processus complexe qui est étroitement lié aux facteurs économiques, politiques et culturels, et, par conséquent, demande de remettre en cause plusieurs questions sociales et éthiques. Dans la situation particulière de l’Argentine - c’est-à-dire: de grandes inégalités sociales entre les citoyens, la rareté des ressources sanitaires, l’accès limité aux services de base, l’absence de politiques spécifiques - l'introduction de technologies génétiques pose de sérieux défis qui doivent impérativement être abordés par les décideurs politiques. Ce projet examine le cas des tests génétiques prénataux dans le contexte du système de santé argentin pour illustrer comment leur introduction peut être complexe dans une nation où l’accès égale aux services de santé doit encore être amélioré. Il faut également examiner les restrictions légales et les préceptes religieux qui influencent l'utilisation des technologies génétiques, ce qui souligne la nécessite de développer un cadre de référence intégral pour le processus d'évaluation des technologies afin d’appuyer l’élaboration de recommandations pour des politiques cohérentes et novatrices applicables au contexte particulier de l’Argentine.

Disease, Disparities and Decision Making: Mandatory HIV Testing of Prospective Immigrants to Canada

Étude de cas / Case study

T testing the immune system

Amid the flurry of grant writing and experimentation, statistical analysis sometimes gets less attention than it requires. Here, we describe fully the considerations that should go into the employment of the statistical two-sample t test.

Spontaneous facial mimicry is modulated by joint attention and autistic traits

Joint attention (JA) and spontaneous facial mimicry (SFM) are fundamental processes in social interactions, and they are closely related to empathic abilities. When tested independently, both of these processes have been usually observed to be atypical in individuals with autism spectrum conditions (ASC). However, it is not known how these processes interact with each other in relation to autistic traits. This study addresses this question by testing the impact of JA on SFM of happy faces using a truly interactive paradigm. Sixty-two neurotypical participants engaged in gaze-based social interaction with an anthropomorphic, gaze-contingent virtual agent. The agent either established JA by initiating eye contact or looked away, before looking at an object and expressing happiness or disgust. Eye tracking was used to make the agent's gaze behavior and facial actions contingent to the participants' gaze. SFM of happy expressions was measured by Electromyography (EMG) recording over the Zygomaticus Major muscle. Results showed that JA augments SFM in individuals with low compared with high autistic traits. These findings are in line with reports of reduced impact of JA on action imitation in individuals with ASC. Moreover, they suggest that investigating atypical interactions between empathic processes, instead of testing these processes individually, might be crucial to understanding the nature of social deficits in autism

Re-testing the link between youth receptivity to tobacco promotion and their susceptibility to smoke

The Index of Receptivity to Tobacco Industry Promotion (IRTIP) is a model that is used by hundreds of articles. The causal claim based on findings from this model is even more pervasive, and has resulted in much of the modern post 1998 tobacco legislation that is still enforced. This thesis tested the link between adolescent receptivity to tobacco industry promotion and susceptibility to smoking. Pierce et al. (1998) reported that they had found a positive and causal association between receptivity and susceptibility by using IRTIP. They claimed that receptivity to tobacco industry promotion was the only significant causal factor affecting adolescent susceptibility to smoking. Exposure to peer and parental smoking was not found to be a significant effect. A review of the literature found that many sections of IRTIP differ from accepted marketing theory on how cigarette advertising and promotions affect adolescent adoption of cigarette smoking. The proxy measures used in IRTIP were shown to diverge from those previously used for measuring the constructs of Attention, Intention, Desire and Action (AIDA) in marketing communications. IRTIP also differs from previous theory by including measures that attempt to quantify the effect of tobacco premiums into a model that was designed to measure the effects of advertising.

Genome-wide analysis of rare copy number variations reveals PARK2 as a candidate gene for attention-deficit/hyperactivity disorder

Attention-deficit/hyperactivity disorder (ADHD) is a common, highly heritable neurodevelopmental disorder. Genetic loci have not yet been identified by genome-wide association studies. Rare copy number variations (CNVs), such as chromosomal deletions or duplications, have been implicated in ADHD and other neurodevelopmental disorders. To identify rare (frequency 1%) CNVs that increase the risk of ADHD, we performed a whole-genome CNV analysis based on 489 young ADHD patients and 1285 adult population-based controls and identified one significantly associated CNV region. In tests for a global burden of large (>500 kb) rare CNVs, we observed a nonsignificant (P=0.271) 1.126-fold enriched rate of subjects carrying at least one such CNV in the group of ADHD cases. Locus-specific tests of association were used to assess if there were more rare CNVs in cases compared with controls. Detected CNVs, which were significantly enriched in the ADHD group, were validated by quantitative (q)PCR. Findings were replicated in an independent sample of 386 young patients with ADHD and 781 young population-based healthy controls. We identified rare CNVs within the parkinson protein 2 gene (PARK2) with a significantly higher prevalence in ADHD patients than in controls (P=2.8 × 10(-4) after empirical correction for genome-wide testing). In total, the PARK2 locus (chr 6: 162 659 756-162 767 019) harboured three deletions and nine duplications in the ADHD patients and two deletions and two duplications in the controls. By qPCR analysis, we validated 11 of the 12 CNVs in ADHD patients (P=1.2 × 10(-3) after empirical correction for genome-wide testing). In the replication sample, CNVs at the PARK2 locus were found in four additional ADHD patients and one additional control (P=4.3 × 10(-2)). Our results suggest that copy number variants at the PARK2 locus contribute to the genetic susceptibility of ADHD. Mutations and CNVs in PARK2 are known to be associated with Parkinson disease.Molecular Psychiatry advance online publication, 20 November 2012; doi:10.1038/mp.2012.161.

Mental health and quality of life after genetic testing for Huntington disease: a long-term effect study in Germany

Predictive genetic testing for Huntington disease (HD) might cause severe short-term psychological reactions in patients with poor mental health. Very few studies exist on the long-term effects of genetic HD testing. The aim of this study was to assess mental health and quality of life in persons who were tested for HD mutation, to compare mental health depending on the result of the genetic test (non-carriers, gene carriers, and patients with HD) and to identify predictors of mental health and quality of life via linear regression. The data were collected by self-report questionnaires. In total, 121 individuals participated in this study: 52 were non-carriers, 54 were gene carriers, and 15 were gene carriers suffering from HD. Non-carriers and gene carriers showed better mental health and quality of life than HD-patients but did not differ from each other. In non-carriers four variables predicted increased depression and low mental quality of life: low perceived social support, no intimate relationship, female sex and younger age. For gene carriers three predictors were found: low perceived social support, the expectation of an unfavorable genetic test result before the testing procedure and being childless. To prevent detrimental effects of HD testing on mental health and mental quality of life, specific attention should be paid to persons with limited social networks during genetic counseling. Assessment of expectations related to the test result and mental health prior to a genetic testing procedure may help to identify gene carriers at risk of poor coping after an unfavorable test result.

Empirical chemosensitivity testing in a spheroid model of ovarian cancer using a microfluidics-based multiplex platform.

The use of biomarkers to infer drug response in patients is being actively pursued, yet significant challenges with this approach, including the complicated interconnection of pathways, have limited its application. Direct empirical testing of tumor sensitivity would arguably provide a more reliable predictive value, although it has garnered little attention largely due to the technical difficulties associated with this approach. We hypothesize that the application of recently developed microtechnologies, coupled to more complex 3-dimensional cell cultures, could provide a model to address some of these issues. As a proof of concept, we developed a microfluidic device where spheroids of the serous epithelial ovarian cancer cell line TOV112D are entrapped and assayed for their chemoresponse to carboplatin and paclitaxel, two therapeutic agents routinely used for the treatment of ovarian cancer. In order to index the chemoresponse, we analyzed the spatiotemporal evolution of the mortality fraction, as judged by vital dyes and confocal microscopy, within spheroids subjected to different drug concentrations and treatment durations inside the microfluidic device. To reflect microenvironment effects, we tested the effect of exogenous extracellular matrix and serum supplementation during spheroid formation on their chemotherapeutic response. Spheroids displayed augmented chemoresistance in comparison to monolayer culturing. This resistance was further increased by the simultaneous presence of both extracellular matrix and high serum concentration during spheroid formation. Following exposure to chemotherapeutics, cell death profiles were not uniform throughout the spheroid. The highest cell death fraction was found at the center of the spheroid and the lowest at the periphery. Collectively, the results demonstrate the validity of the approach, and provide the basis for further investigation of chemotherapeutic responses in ovarian cancer using microfluidics technology. In the future, such microdevices could provide the framework to assay drug sensitivity in a timeframe suitable for clinical decision making.

On the testing of large PV arrays

This paper reports on the IES-UPM experience from 2006 to 2010 in the field of the characterization of PV arrays of commercial large PV plants installed in Spain within the framework of the profitable economic scenarios associated to feed-in tariff laws. This experience has extended to 200 MW and has provided valuable lessons to minimize uncertainty, which plays a key role in quality assurance procedures. The paper deals not only with classic I–V measurements but also with watt-metering-based procedures. Particular attention is paid to the selection of irradiance and cell temperature sensors

Testing of fluorescent DC lamps for Solar Home Systems

With the advent of the Universal Technical Standard for Solar Home Systems, procedures to test the compliance of SHS fluorescent lamps with the standard have been developed. Definition of the laboratory testing procedures is a necessary step in any lamp quality assurance procedure. Particular attention has been paid to test simplicity and to affordability, in order to facilitate local application of the testing procedures, for example by the organisations which carry out electrification programmes. The set of test procedures has been applied to a representative collection of 42 lamps from many different countries, directly acquired in the current photovoltaic rural electrification market. Tests apply to: lamp resistance under normal operating conditions; lamp reliability under extreme conditions; under abnormal conditions; and lamp luminosity. Results are discussed and some recommendations for updating the relevant standard are given. The selected technical standard, together with the proposed testing procedures, form the basis of a complete quality assurance tool that can be applied locally in normal electrical laboratories. Full testing of a lamp requires less than one month, which is very reasonable on the context of quality assurance programmes

LED bulb lamps technical specification and testing procedure for solar home systems.

With the consolidation of the new solid state lighting LEOs devices, te5t1n9 the compliance 01 lamps based on this technology lor Solar Home Systems (SHS) have been analyzed. The definition of the laboratory procedures to be used with final products 15 a necessary step in arder to be able to assure the quality of the lamps prior to be installed [1]. As well as with CFL technology. particular attention has been given to simplicity and technical affordability in arder to facilitate the implementation of the test with basie and simple laboratory too15 even on the same SHS electrification program locations. The block of test procedures has been applied to a set of 14 low-cost lamps. They apply to lamp resistance, reliability and performance under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool 01 any LEO bulb.

LED bulbs technical specification and testing procedure for solar home systems

The definition of technical specifications and the corresponding laboratory procedures are necessary steps in order to assure the quality of the devices prior to be installed in Solar Home Systems (SHS). To clarify and unify criteria a European project supported the development of the Universal Technical Standard for Solar Home Systems (UTSfSHS). Its principles were to generate simple and affordable technical requirements to be optimized in order to facilitate the implementation of tests with basic and simple laboratory tools even on the same SHS electrification program countries. These requirements cover the main aspects of this type of installations and its lighting chapter was developed based on the most used technology at that time: fluorescent tubes and CFLs. However, with the consolidation of the new LED solid state lighting devices, particular attention is being given to this matter and new procedures are required. In this work we develop a complete set of technical specifications and test procedures that have been designed within the frame of the UTSfSHS, based on an intense review of the scientific and technical publications related to LED lighting and their practical application. They apply to lamp reliability, performance and safety under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool for any LED bulb.