Atlas do perfil habitacional de Moçambique (1997 a 2007), uma abordagem do SIG

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística gestão de informação

Efeitos imediatos da técnica de desrotação do atlas de Rocabado e do SNAG C1/2 de Mulligan na amplitude do teste de flexão-rotação em indíviduos com cefaleia cervicogénica : um ensaio clínico aleatório

RESUMO: A cefaleia cervicogénica é uma forma comum de dor de cabeça, que tem sido associada à existência de uma disfunção das estruturas da coluna cervical superior. Estudos recentes mostram uma grande incidência dessa disfunção a nível de C1-C2, avaliada pelo teste de flexão-rotação. Vários terapeutas manuais, como Brian Mulligan e Mariano Rocabado, têm sido sugerido técnicas de tratamento para este tipo de disfunção. Contudo, a evidência acerca da efectividade dessas técnicas é escassa. Desenho do estudo: Foi efectuado um ensaio clínico aleatório, duplamente cego, composto por três fases: pré-intervenção, intervenção e pós-intervenção. Objectivos: Avaliar e comparar os efeitos imediatos de duas técnicas de Terapia Manual Ortopédica (SNAG C1/2 de Mulligan e técnica de desrotação do atlas de Rocabado), na amplitude de movimento de rotação do segmento vertebral C1-C2, em indivíduos com história de cefaleia cervicogénica e com limitação no teste de flexão-rotação. As técnicas de tratamento foram usadas de forma isolada, em comparação a um grupo placebo. Métodos: Uma amostra de 60 indivíduos, com cefaleia cervicogénica e limitação do teste de flexão-rotação, foram aleatoriamente distribuídos por três grupos: SNAG C1/2 de Mulligan, técnica de desrotação do atlas de Rocabado e grupo placebo. O outcome primário foi a amplitude de movimento obtida no teste de flexão-rotação, que foi medido antes e imediatamente após a intervenção. Resultados: Imediatamente após a intervenção, a amplitude verificada no teste de flexão-rotação aumentou 21.8º (DP, 4.68) no grupo submetido ao SNAG C1/2 de Mulligan, 15º (DP, 5.07) no grupo em que foi aplicada a técnica de desrotação do atlas de Rocabado e 0.65º (DP, 0.67) no grupo placebo. Uma ANOVA modelo misto, 2 por 3, revelou efeito principal significativo do tempo (p<.001) e grupo (p<.001), assim como uma interacção significativa entre grupo e tempo (p<.001), relativamente à variável amplitude do teste de flexão-rotação. Estes resultados indicam que as diferenças verificadas entre os grupos eram dependentes do momento de avaliação. Uma comparação múltipla post hoc revelou que quer as técnicas de Mulligan, quer de Rocabado, produziram efeitos significativamente maiores que a intervenção placebo na amplitude de movimento do teste de flexão-rotação (p<.001 e p=.001, respectivamente). No entanto,não se verificou uma diferença significativa no que diz respeito à efectividade de ambas as técnicas de Terapia Manual Ortopédica aplicadas (p=.42). Conclusão: Esta investigação sugere que as duas técnicas de Terapia Manual Ortopédica avaliadas produziram efeito clínica e estatisticamente significativo na amplitude do teste de flexão-rotação. No entanto, não se verificaram diferenças entre as duas técnicas, no que diz respeito ao seu efeito no ganho de amplitude de movimento. Os resultados obtidos fornecem evidência preliminar sobre a efectividade de ambas as intervenções no tratamento da redução de amplitude de movimento em indivíduos com história de cefaleia cervicogénica.-------------------------------ABSTRACT:Background: Cervicogenic headache is a common form of headache arising from dysfunction in structures of the upper cervical spine. Recent studies have shown a high incidence of C1/2 dysfunction, evaluated by the flexion-rotation test (FRT). Several manual therapists have suggested different approaches to manage that dysfunction, such as Brian Mulligan and Mariano Rocabado. However, the evidence of the effectiveness of those manual techniques is anedoctal. Design: Randomized double blinded controlled trial with three phases: pre-intervention, intervention and post-intervention. Objectives: To determine and compare the immediate effects of two manual therapy techniques (Mulligan’s SNAG C1/2 and Rocabado’s atlas’ derotation technique) in the range of motion of C1-C2 vertebral segments, in cervicogenic headache patients and with limitation on the flexion-rotatoin test. The treatment techniques were used as single treatments against a placebo group. Methods: A sample of 60 subjects with cervicogenic headache and FRT limitation were randomly allocated into one of three groups: Mulligan’s C1/2 SNAG, Rocabado’s atlas derotation technique or placebo group. The primary outcome was the flexion rotation test range, which was measured before and immediately after the intervention. Results: Immediately after the application of the interventions, FRT range increased by 21.8º (SD, 4.68) for the Mulligan’s C1-2 SNAG group, 15º (SD, 5.07) for the Rocabado’s atlas derotation technique and 0.65º (SD, 0.67) for the placebo group. A 2-by-3 mixedmodel ANOVA a significant main effect of time (p<.001) and group (p<.001), as well as a significant interaction between group and time (p<.001) for the variable FRT range. These results indicate that group differences were dependent on time. A pairwise post hoc comparison revelad that both the Mulligan and Rocabado techniques produced significantly more effect on FRT range of motion than the placebo intervention (p<.001 and p=.001, respectively). However, there was not a significant difference between the effectiveness of the two manual therapy techniques (p=.42).Conclusion: This investigation’s findings suggest that both Mulligan’s C1/2 SNAG and Rocabado’s atlas derotation techniques produced a clinically and statistically significant effect on FRT range, but there were no changes between the two techniques in their effectiveness. These results provide preliminary evidence for the efficacy of both manual therapy techniques in the management of individuals with cervicogenic headache and FRT limitation.

Atlas Portuário Nacional: contributos metodológicos para a sua elaboração

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Gestão do Território,

Atlas sócio-demográfico de Moçambique (1997-2007) – uma abordagem SIG

Dissertação apresentada como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação.

An Atlas for the future National Park: Las Cumbres de la Sierra de Guadarrama

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Agenesis of the posterior arch of the atlas

PURPOSE: To illustrate the radiological findings and review the current literature concerning a rare congenital abnormality of the posterior arch of the atlas. CASE REPORT: An adult female without neurological symptoms presented with an absent posterior arch of the atlas, examined with plain films and helical computerized tomography. Complete agenesis of the posterior arch of the atlas is a rare entity that can be easily identified by means of plain films. Although it is generally asymptomatic, atlantoaxial instability and neurological deficits may occur because of structural instability. Computerized tomography provides a means of assessing the extent of this abnormality and can help evaluate the integrity of neural structures. Although considered to be rare entities, defects of the posterior arch of the atlas may be discovered as incidental asymptomatic findings in routine cervical radiographs. Familiarity with this abnormality may aid medical professionals in the correct management of these cases.

Jet energy measurement and its systematic uncertainty in proton-proton collisions at s√=7 TeV with the ATLAS detector

The jet energy scale (JES) and its systematic uncertainty are determined for jets measured with the ATLAS detector using proton–proton collision data with a centre-of-mass energy of s√=7 TeV corresponding to an integrated luminosity of 4.7 fb −1 . Jets are reconstructed from energy deposits forming topological clusters of calorimeter cells using the anti- kt algorithm with distance parameters R=0.4 or R=0.6 , and are calibrated using MC simulations. A residual JES correction is applied to account for differences between data and MC simulations. This correction and its systematic uncertainty are estimated using a combination of in situ techniques exploiting the transverse momentum balance between a jet and a reference object such as a photon or a Z boson, for 20≤pjetT<1000 GeV and pseudorapidities |η|<4.5 . The effect of multiple proton–proton interactions is corrected for, and an uncertainty is evaluated using in situ techniques. The smallest JES uncertainty of less than 1 % is found in the central calorimeter region ( |η|<1.2 ) for jets with 55≤pjetT<500 GeV . For central jets at lower pT , the uncertainty is about 3 %. A consistent JES estimate is found using measurements of the calorimeter response of single hadrons in proton–proton collisions and test-beam data, which also provide the estimate for pjetT>1 TeV. The calibration of forward jets is derived from dijet pT balance measurements. The resulting uncertainty reaches its largest value of 6 % for low- pT jets at |η|=4.5 . Additional JES uncertainties due to specific event topologies, such as close-by jets or selections of event samples with an enhanced content of jets originating from light quarks or gluons, are also discussed. The magnitude of these uncertainties depends on the event sample used in a given physics analysis, but typically amounts to 0.5–3 %.

Measurement of the top pair production cross-section in 8 TeV proton-proton collisions using kinematic information in the lepton+jets final state with ATLAS

A measurement is presented of the tt¯ inclusive production cross section in pp collisions at a center-of-mass energy of s√=8  TeV using data collected by the ATLAS detector at the CERN Large Hadron Collider. The measurement was performed in the lepton+jets final state using a data set corresponding to an integrated luminosity of 20.3  fb−1. The cross section was obtained using a likelihood discriminant fit and b-jet identification was used to improve the signal-to-background ratio. The inclusive tt¯ production cross section was measured to be 260±1(stat)+22−23(stat)±8(lumi)±4(beam)  pb assuming a top-quark mass of 172.5 GeV, in good agreement with the theoretical prediction of 253+13−15  pb. The tt¯→(e,μ)+jets production cross section in the fiducial region determined by the detector acceptance is also reported.

Centrality and rapidity dependence of inclusive jet production in sNN=5.02 TeV proton-lead collisions with the ATLAS detector

Measurements of the centrality and rapidity dependence of inclusive jet production in sNN−−−√=5.02 TeV proton--lead (p+Pb) collisions and the jet cross-section in s√=2.76 TeV proton--proton collisions are presented. These quantities are measured in datasets corresponding to an integrated luminosity of 27.8 nb−1 and 4.0 pb−1, respectively, recorded with the ATLAS detector at the Large Hadron Collider in 2013. The p+Pb collision centrality was characterised using the total transverse energy measured in the pseudorapidity interval −4.9<η<−3.2 in the direction of the lead beam. Results are presented for the double-differential per-collision yields as a function of jet rapidity and transverse momentum (pT) for minimum-bias and centrality-selected p+Pb collisions, and are compared to the jet rate from the geometric expectation. The total jet yield in minimum-bias events is slightly enhanced above the expectation in a pT-dependent manner but is consistent with the expectation within uncertainties. The ratios of jet spectra from different centrality selections show a strong modification of jet production at all pT at forward rapidities and for large pT at mid-rapidity, which manifests as a suppression of the jet yield in central events and an enhancement in peripheral events. These effects imply that the factorisation between hard and soft processes is violated at an unexpected level in proton--nucleus collisions. Furthermore, the modifications at forward rapidities are found to be a function of the total jet energy only, implying that the violations may have a simple dependence on the hard parton--parton kinematics.

Differential top-antitop cross-section measurements as a function of observables constructed from final-state particles using pp collisions at s√=7 TeV in the ATLAS detector

Various differential cross-sections are measured in top-quark pair (tt¯) events produced in proton--proton collisions at a centre-of-mass energy of s√=7 TeV at the LHC with the ATLAS detector. These differential cross-sections are presented in a data set corresponding to an integrated luminosity of 4.6 fb−1. The differential cross-sections are presented in terms of kinematic variables of a top-quark proxy referred to as the pseudo-top-quark whose dependence on theoretical models is minimal. The pseudo-top-quark can be defined in terms of either reconstructed detector objects or stable particles in an analogous way. The measurements are performed on tt¯ events in the lepton+jets channel, requiring exactly one charged lepton and at least four jets with at least two of them tagged as originating from a b-quark. The hadronic and leptonic pseudo-top-quarks are defined via the leptonic or hadronic decay mode of the W boson produced by the top-quark decay in events with a single charged lepton.The cross-section is measured as a function of the transverse momentum and rapidity of both the hadronic and leptonic pseudo-top-quark as well as the transverse momentum, rapidity and invariant mass of the pseudo-top-quark pair system. The measurements are corrected for detector effects and are presented within a kinematic range that closely matches the detector acceptance. Differential cross-section measurements of the pseudo-top-quark variables are compared with several Monte Carlo models that implement next-to-leading order or leading-order multi-leg matrix-element calculations.

Evidence of Wγγ production in pp collisions at s√=8 TeV and limits on anomalous quartic gauge couplings with the ATLAS detector

This Letter reports evidence of triple gauge boson production pp→W(ℓν)γγ+X, which is accessible for the first time with the 8 TeV LHC data set. The fiducial cross section for this process is measured in a data sample corresponding to an integrated luminosity of 20.3 fb−1, collected by the ATLAS detector in 2012. Events are selected using the W boson decay to eν or μν as well as requiring two isolated photons. The measured cross section is used to set limits on anomalous quartic gauge couplings in the high diphoton mass region.

Measurement of Spin Correlation in Top-Antitop Quark Events and Search for Top Squark Pair Production in pp Collisions at s√=8 TeV Using the ATLAS Detector

A measurement of spin correlation in tt¯ production is presented using data collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of 8 TeV, corresponding to an integrated luminosity of 20.3 fb−1. The correlation between the top and antitop quark spins is extracted from dilepton tt¯ events by using the difference in azimuthal angle between the two charged leptons in the laboratory frame. In the helicity basis the measured degree of correlation corresponds to Ahelicity=0.38±0.04, in agreement with the Standard Model prediction. A search is performed for pair production of top squarks with masses close to the top quark mass decaying to predominantly right-handed top quarks and a light neutralino, the lightest supersymmetric particle. Top squarks with masses between the top quark mass and 191 GeV are excluded at the 95% confidence level.

Measurement of the transverse polarization of Λ and Λ ¯ hyperons produced in proton-proton collisions at s =7TeV using the ATLAS detector

The transverse polarization of Λ and Λ¯ hyperons produced in proton--proton collisions at a center-of-mass energy of 7 TeV is measured. The analysis uses 760 μb−1 of minimum bias data collected by the ATLAS detector at the LHC in the year 2010. The measured transverse polarization averaged over Feynman xF from 5×10−5 to 0.01 and transverse momentum pT from 0.8 to 15 GeV is −0.010±0.005(stat)±0.004(syst) for Λ and 0.002±0.006(stat)±0.004(syst) for Λ¯. It is also measured as a function of xF and pT, but no significant dependence on these variables is observed. Prior to this measurement, the polarization was measured at fixed-target experiments with center-of-mass energies up to about 40 GeV. The ATLAS results are compatible with the extrapolation of a fit from previous measurements to the xF range covered by this mesurement.

Measurements of Higgs boson production and couplings in the four-lepton channel in pp collisions at center-of-mass energies of 7 and 8 TeV with the ATLAS detector

The final ATLAS Run 1 measurements of Higgs boson production and couplings in the decay channel H→ZZ∗→ℓ+ℓ−ℓ′+ℓ′−, where ℓ,ℓ′=e or μ, are presented. These measurements were performed using pp collision data corresponding to integrated luminosities of 4.5 fb−1 and 20.3 fb−1 at center-of-mass energies of 7 TeV and 8 TeV, respectively, recorded with the ATLAS detector at the LHC. The H→ZZ∗→4ℓ signal is observed with a significance of 8.1 standard deviations at 125.36 GeV, the combined ATLAS measurement of the Higgs boson mass from the H→γγ and H→ZZ∗→4ℓ channels. The production rate relative to the Standard Model expectation, the signal strength, is measured in four different production categories in the H→ZZ∗→4ℓ channel. The measured signal strength, at this mass, and with all categories combined, is 1.44 +0.40−0.33. The signal strength for Higgs boson production in gluon fusion or in association with tt¯ or bb¯ pairs is found to be 1.7 +0.5−0.4, while the signal strength for vector-boson fusion combined with WH/ZH associated production is found to be 0.3 +1.6−0.9.