Longitudinal study of the influence of removable partial denture and chemical control on the levels of Streptococcus mutans in saliva

Some studies have evaluated the salivary levels of mutans streptococci (MS) in removable partial denture (RPD) users. Saliva samples (2.0 mL) were obtained from 31 patients in six periods: (T0): immediately before installation of RPD; (T8): 8 days after T0; (T48): 48 days after T0; (T92): 92 days after T0; (T140): 140 days after T0 and (T189): 189 days after T0. The samples were vortexed and serially diluted from 10(-1) to 10(-6) in 0.05 m phosphate buffer (pH 7.4). From each dilution, 0.025 mL was plated on Mitis Salivarius Bacitracin (MSB). The plates were incubated in 5% CO2 at 37 degreesC for 72 h. There was an increase (t -test, P < 0.05) in the number of MS between periods T0 and T48 (mean/s.d., CFU mL(-1) of saliva): T0: 2.26/4.43 x 10(6) and T48: 0.47/1.48 x 10(8) . After this, intensive treatment with CHX was accomplished in 29 patients. Saliva samples were obtained after treatment in four periods: (T24 h): 24 h after T0; (T14): 14 days after T24 h; (T28): 28 days after T24 h, and (T63): 63 days after T24 h. The number of MS in saliva did not decrease (t -test, P > 0.05). A new CHX formulation was applied in 15 patients. Saliva samples were obtained in periods: (T0): before new CHX application; (T24 h): 24 h after T0 and (T82): 82 days after T0. The new CHX reduced MS levels in saliva: (mean/s.d., CFU mL(-1) of saliva): T0: 6.64/8.47 x 10(6) and T24 h: 3.2/4.27 x 10(5) (sign rank, P < 0.05). In conclusion, there was a significant increase in the number of MS in saliva after the installation of RPD. The intensive treatment with a properly formulated CHX was effective in the reduction of MS, between 24 h and 82 days after its application.

Influence of Different Ceramics on Resin Cement Knoop Hardness Number

This study evaluated: 1) the effect of different ceramics on light attenuation that could affect microhardness, measured as the Knoop Hardness Number (KHN), of a resin cement immediately and 24 hours after polymerization and 2) the effect of different activation modes (direct light-activation, light activation through ceramics and chemical activation) on the KHN of a resin cement.Resin cement Rely X ARC (3M ESPE) specimens 5.0 mm in diameter and 1.0 nun thick were made in a Teflon mold covered with a polyester film. The cement was directly light activated for 40 seconds with an XL 2500 curing unit (3M ESPE) with 650 mW/cm(2), light activated through ceramic discs of Duceram Plus (DeguDent), Cergogold (DeguDent), IPS Empress (Ivoclar), IPS Empress 2 (Ivoclar), Procera. (NobelBiocare), In Ceram Alumina (Vita) and Cercon (DeguDent), having a 1.2 mm thickness or chemically activated without light application. The resin cement specimens were flattened, and KHN was obtained using an HMV 2 microhardness tester (Shimadzu) with a load of 50 g applied for 15 seconds 100 pin from the irradiated surface immediately and after storage at 37 degrees C for 24 hours. Ten measurements were made for each specimen, with three specimens for each group at each time. The data were submitted to ANOVA and Tukey's test (p=0.05). The KHN of the resin cement was not only affected by the mode of activation, but also by the post-activation testing time. The mean KHN of the resin cement for chemical activation and through all ceramics showed statistically significant lower values compared to direct activation immediately and at 24 hours. The KHN for 24 hours post-activation was always superior to the immediate post-activation test except with direct activation. The most opaque ceramics resulted in the lowest KHN values.

Desempenho de híbridos de couve-flor de verão em Jaboticabal

Instalou-se um experimento, em campo aberto, com o objetivo de comparar o desempenho de oito híbridos de couve-flor de verão. Adotou-se o delineamento em blocos casualizados, com oito tratamentos e quatro repetições. A parcela experimental de 14 m² constou de 28 plantas distribuídas no espaçamento de 1,0 m entre linhas e 0,5 m entre plantas. Foram avaliados os híbridos de couve-flor: TPX00123, TPC00218, Sarah AF-1169, Sharon, Snow-Flake, First-Snow, Veneza e Verona. As adubações de cobertura foram realizadas com 10,5 kg de sulfato de amônio e 2,8 kg de cloreto de potássio, aplicados aos 15, 30, 45 e 60 dias após o transplante das mudas. A colheita das cabeças foi realizada quando começaram a atingir o ponto ideal de colheita com cabeças compactas e botões florais ainda unidos. Os híbridos TPC00218 e TPX00123 mostraram-se promissores, com produtividades comerciais de 23,8 e 23,2 t ha-1, respectivamente. O híbrido First-Snow possui baixo desenvolvimento de plantas e boa produtividade, podendo ser cultivado mais adensado. O híbrido Snow-Flake foi o que obteve menor produtividade, não sendo recomendado para plantio na região de Jaboticabal. Todos os híbridos testados apresentaram produção classificada na categoria extra e na classe 8 (maiores que 230 mm).

Determination of pesticide residues in coconut water by liquid-liquid extraction and gas chromatography with electron-capture plus thermionic specific detection and solid-phase extraction and high-performance liquid chromatography with ultraviolet detection

Two simple methods were developed to determine, 11 pesticides in coconut water, a natural isotonic drink rich in salts, sugars and vitamins consumed by the people and athletes. The first procedure involves solid-phase extraction using Sep-Pak Vac C-18 disposable cartridges with methanol for elution. Isocratic analysis was carried out by means of high-performance liquid chromatography with ultraviolet detection at 254 nm to analyse captan, chlorothalonil, carbendazim, lufenuron and diafenthiuron. The other procedure is based on liquid-liquid extraction with hexane-dichloromethane (1:1, v/v), followed by gas chromatographic analysis with effluent splitting to electron-capture detection for determination of endosulfan, captan, tetradifon and trichlorfon and thermionic specific detection for determination of malathion, parathion-methyl and monocrotophos. The methods were validated with fortified samples at different concentration levels (0.01-12.0 mg/kg). Average recoveries ranged from 75 to 104% with relative standard deviations between 1.4 and 11.5%. Each recovery analysis was repeated at least five times. Limits of detection ranged from 0.002 to 2.0 mg/kg. The analytical procedures were applied to 15 samples and no detectable amounts of the pesticides were found in any samples under the conditions described. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Effect of irrigating solution and calcium hydroxide root canal dressing on the repair of apical and periapical tissues of teeth with periapical lesion

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Apical and periapical repair of dogs' teeth with periapical lesions after endodontic treatment with different root canal sealers.

The aim of this study was to evaluate the apical and periapical repair after root canal treatment of dogs' teeth with pulp necrosis and chronic periapical lesion using different root canal sealers. After periapical lesion induction, forty-four root canals of 3 dogs were submitted to biomechanical preparation using 5.25% sodium hypochlorite as an irrigating solution. A calcium hydroxide dressing (Calen PMCC) was applied for 15 days and the root canals were filled using the lateral condensation technique with gutta-percha points and Sealapex, AH Plus or Sealer Plus for sealing. After 180 days, the animals were sacrificed by anesthetic overdose and the obtained histological sections were stained with hematoxylin-eosin for optical microscopic analysis of the apical and periapical repair. The groups filled with Sealapex and AH Plus had better histological repair (p < 0.05) than the group filled with Sealer Plus, that had unsatisfactory results.

Evaluating the bonding of two adhesive systems to enamel submitted to whitening dentifrices.

The aim of this study was to evaluate by micro-shear bond strength test, the bond strength of composite resin restoration to enamel submitted to whitening dentifrices. Forty bovine teeth were embedded in polystyrene resin and polished. The specimens were randomly divided into eight groups (n=5), according to the dentifrice (carbamide peroxide, hydrogen peroxide and conventional dentifrice) and the adhesive system (Prime & Bond 2.1 and Adper Single Bond 2). Dentifrice was applied for 15 minutes a day, for 21 days. Thirty minutes after the last exposure to dentifrice, the samples were submitted to a bonding procedure with the respective adhesive system. After that, four buttons of resin were bonded in each sample using transparent cylindrical molds. After 24 hours, the teeth were submitted to the micro-shear bond strength test and subsequent analysis of the fracture mode. Data were submitted to analysis of variance and Fisher's PLSD test (alpha = 0.05). The micro-shear bond strength showed no difference between adhesives systems but a significant reduction was found between the control and carbamide groups (p = 0.0145) and the control and hydrogen groups (p = 0.0370). The evaluation of the failures modes showed that adhesive failures were predominant. Cohesive failures were predominant in group IV The use of dentifrice with peroxides can decrease bonding strength in enamel.

Resistência adesiva de um sistema auto-condicionante e um convencional simplificado, aplicados à dentina tratada com diferentes condicionadores

Pós-graduação em Odontologia - FOAR

Efeito do curativo de demora à base de hidróxido de cálcio na reparação apical e periapical, pós tratamento de canais radiculares de dentes de cães com necrose pulpar e reação periapical crônica induzida. Análise histológica

Pós-graduação em Odontologia - FOAR

Estudo da passagem de diferentes concentrações de ácido fosfórico através da dentina e observação da morfologia dentinária pelo microscópio eletrônico de varredura

Pós-graduação em Odontologia Restauradora - ICT

Número mínimo de aplicações de fungicidas no controle das cercosporioses da cultura do amendoim

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Comparación de la conductancia hidráulica dentinaria, de acuerdo al tiempo de aplicación de desensibilizantes con base de oxalatos

ABSTRACT. Introduction: an in vitro model was used to measure the hydraulic conductance in human dentin discs treated with oxalic acid for 15, 30 or 60 s maintaining the occlusive effect and measuring 7 and 14 days after application. Methods: 45 dentin discs measuring 1 mm thick were obtained from human third molars which were free of caries and in no occlusion; the samples were obtained from patients aged 16 to 30 years. Discs were sorted out into three study groups (n = 15) depending on the time of application of a commercial solution of oxalate-based dentin desensitizer (DD) (BisBlock®) which contains ˂ 5% oxalic acid of 1.5-1.8 pH: in group A the agent was applied for 15 s, in group B it was applied for 30 s, and in group C for 60 s. The hydraulic conductance of each disc was calculated after acid etching, which corresponds to the maximum permeability of discs (100%) after immediate application of oxalic acid, as well as seven and fourteen days of storage in saline solution. The statistical analysis was done with ANOVA test and post-hoc Games-Howell test. Results: 35,46 ± 23.41% in Group A, 36.34 ± 15.88% in Group B and 24.99 ± 14.99% in Group C, showing that the use of DD for 15, 30 or 60 s decreased permeability in a statistically significant manner (p <0.05). Conclusions: DD was effective in reducing hydraulic conductance regardless of application time, but this reduction was temporary only, since after seven days permeability returns to values close to those of baseline.

Avaliações fisiológicas de sorgo sacarino inoculado com Azospirillum brasilense em função da adubação nitrogenada e reguladores vegetais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Suplementação nutricional, pretensões e custo entre jovens do interior e litoral paulista experiêntes em treinamento resistido

Objective and closed questions were applied to 15 - 21 years old individuals under regular resistance exercise practice and self-reported nutritional supplements users, approaching training practices, type of substance feed and socioeconomic characteristics. The data were treated by frequency around the mean value. Major difference was observed to the goal of improvement in physical fitness (Guaruja 21% and Bauru 9.6%), close to the muscle hypertrophic enhancements (Guaruja 22% and Bauru 19.2%), and health proposes (17.3%), which was only reported in the country city. The monthly employment with supplements was observed to be close to one hundred Real, in both regions (Guaruja 79% and Bauru 80%). Even, based on different purposes, the supplements feed practice was closed to the goals, showing a reliable referential of use, but done without appropriated professional care.

Muscle lesion treatment in Brazilian soccer players: theory vs. practice

Background: In this study we evaluated the rehabilitation profile of Brazilian soccer players which underwent lower limb muscle lesions. Methods: This is a descriptive investigation. We evaluated 139 professional soccer players (1724 years old). We evaluated the following variables: muscle lesion diagnosis, symptoms, non steroidal anti-inflammatory used, physiotherapy treatment, which physiotherapy recourses was used if treated and train adaptation. Results: In great part of the athletes muscle lesion remained between 2 weeks and 1 month. Around 54% were diagnosed by a physician; the other part was diagnosed by a physical therapist. Non steroidal anti-inflammatory were prescribed by physicians in 42% of the cases; in 7% the physical therapist prescribed the medication while in 49% of the cases the masseur prescribed the drug. More than 1/4 of the athletes received physiotherapy treatement between 48 hours and 5 days. Isometric exercise therapy was applied in 15% of the cases. 63% were not accompanied by the physiotherapist on their return to the field. 48% received massages immediately after injury. Conclusion: We presented discrepancy between the recommended theory described by several researches and the practice. We indicate the necessity of recycling in a general context the rehabilitation of muscle injuries.