Electrochromic Properties of a Metallo-supramolecular Polymer Derived from Tetra(2-pyridyl-1,4-pyrazine) Ligands Integrated in Thin Multilayer Films

The electrochromic behavior of iron complexes derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) and a hexacyanoferrate species in polyelectrolytic multilayer adsorbed films is described for the first time. This complex macromolecule was deposited onto indium-tin oxide (ITO) substrates via self-assembly, and the morphology of the modified electrodes was studied using atomic force microscopy (AFM), which indicated that the hybrid film containing the polyelectrolyte multilayer and the iron complex was highly homogeneous and was approximately 50 nm thick. The modified electrodes exhibited excellent electrochromic behavior with both intense and persistent coloration as well as a chromatic contrast of approximately 70%. In addition, this system achieved high electrochromic efficiency (over 70 cm(2) C-1 at 630 nm) and a response time that could be measured in milliseconds. The electrode was cycled more than 10(3) times, indicating excellent stability.

XRD, AFM, IR and TGA study of nanostructured hydroxyapatite

In this work, the synthetic hydroxyapatite (HAP) was studied using different preparation routes to decrease the crystal size and to study the temperature effect on the HAP nano-sized hydroxyapatite crystallization. X-ray diffraction (XRD) analysis indicated that all samples were composed by crystalline and amorphous phases . The sample with greater quantity of amorphous phase (40% of total mass) was studied. The nano-sized hydroxyapatite powder was heated and studied at 300, 500, 700, 900 and 1150 °C. All samples were characterized by XRD and their XRD patterns refined using the Rietveld method. The crystallites presented an anisotropic form, being larger in the [001] direction. It was observed that the crystallite size increased continuously with the heating temperature and the eccentricity of the ellipsoidal shape changed from 2.75 at 300 °C to 1.94, 1.43, 1.04 and 1.00 respectively at 500, 700, 900 and 1150 °C. In order to better characterize the morphology of the HAP the samples were also examined using atomic force microscopy (AFM), infrared spectrometry (IR) and thermogravimetric analysis (TGA).

Surface treatment of dental porcelain with CO2 laser: porosity analysis and AFM.

The effect of CO2 continuous laser irradiation on the surface properties of veneering porcelains has already been tested. The surface observed after laser irradiation is similar to that achieved by auto-glaze in terms of roughness and color parameters (Sgura R, et al. Dental Materials 2011;27(Suppl. 1):e72–73). The purpose of this study was to analyze the surface porosity of porcelain discs after CO2 laser treatment and compare it to auto-glaze treatment, in furnace. A morphological analysis of the porcelain surface was conducted using atomic force microscopy (AFM) and conventional optical microscopy (OM).

Biochemische Charakterisierung des Exopolysaccharids von Pediococcus parvulus B399, sowie dessen Hydrolyse durch eine neue beta-1,3-Glucanase aus Delftia sp. MV01

In der vorliegenden Arbeit wurde die erste β-1,3-Glucanase aus Delftia beschrieben. Es konnte gezeigt werden, dass das Enzym unter anderem gegen das nur schwer zu hydrolysierende Exopolysaccharid aus Pediococcus parvulus wirkte. rnrnIm Einzelnen wurde zunächst das Exopolysaccharid aus Pediococcus parvulus B399 aus einem eigens zusammengestellten β-Glucan-Synthesemedium (Medium M) isoliert und gereinigt. Anschließend erfolgte eine umfassende Charakterisierung des Biopolymers. Hierzu gehörten neben der sauren Hydrolyse zur Bestimmung der Monomerzusammensetzung des Polymers, auch spektroskopische Methoden, darunter 1H und 13C-NMR. Mithilfe der NMR-Spektroskopie konnte die Struktur des Exopolysaccharids aus Pediococcus parvulus B399 bestimmt werden. Es handelte sich hierbei ebenfalls um ein β-1,3(1,2)-Glucan, wie es bereits für Pediococcus parvulus 2.6 beschrieben wurde. Darüber hinaus wurde erstmals ein ATR-FTIR-Spektrum für ein Exopolysaccharid aus Pediokokken gezeigt. Über GPC-Messungen konnte auch die molekulare Größe des β-1,3(1,2)-Glucans aus Pediococcus parvulus B399 bestimmt werden. Es wurde nachgewiesen, dass sich das Exopolysaccharid bei Anzucht in Medium M aus einer hochmolekularen Fraktion (5*106 g/mol) und vier niedermolekularen Fraktionen (347; 818; 10048 und 20836 g/mol) zusammensetzte. Neben der strukturellen Charakterisierung, wurde das Exopolysaccharid auch rheologisch untersucht. Dabei konnte festgestellt werden, dass es sich durch seine schwach gelbildenen Eigenschaften auch zum Einsatz in der Lebensmittelindustrie als Stabilisator, Fettersatzmittel oder ähnliches eignen würde. Die erwähnte gelbildende Netzwerkstruktur konnte für das Exopolysaccharid aus Pediococcus parvulus B399 auch erstmals im AFM bestätigt werden. rnEin weiterer Teil der Arbeit umfasste ein breites Screeningverfahren nach einem geeigneten Organismus, der das Exopolysaccharid aus Pediococcus parvulus B399 effektiv hydrolysieren sollte. Aus einer Anreicherungskultur des Termitendarms (Wenzel et al., 2002), konnte Delftia sp. MV01 isoliert werden. Dieser Organismus produzierte bei Wachstum in β glucanhaltigem Medium (Exopolysaccharid aus Pediococcus parvulus B399, sowie weitere kommerziell erhältliche β-1,3-Glucane) eine Glucanase, die in folgenden Schritten konventionell gereinigt und charakterisiert wurde.

La spettroscopia di forza basata sull'AFM nello studio dello spazio conformazionale e dei processi aggregativi di proteine prioniche

Le malattie neurodegenerative sono caratterizzate da aggregazione proteica, dipendente dalla perdita della usuale struttura fisiologica funzionale delle proteine coinvolte, a favore di conformazioni tossiche (patologiche). Il modello corrente descrive questi cambiamenti conformazionali come eventi rari e ritiene che non esista una sola conformazione patogena, ma che tali possibili conformazioni siano piuttosto eterogenee. La caratterizzazione di queste strutture è, di conseguenza, difficile con le tradizionali tecniche in bulk che permettono di studiare solo la conformazione media e non rendono possibile il riconoscimento delle caratteristiche dei conformeri individuali. Lo sviluppo delle tecniche di singola molecola ha permesso di studiare in modo approfondito le conformazioni possibili. In questo lavoro la spettroscopia di forza di singola molecola basata sull'AFM viene applicata a PrP (proteina responsabile delle encefalopatie spongiformi trasmissibili). Si studiano gli equilibri conformazionali del monomero e quelli di costrutti oligomerici, allo scopo di caratterizzare gli step iniziali dei processi aggregativi. Nel corso di questo lavoro di tesi è stato, in particolare, sviluppato un sistema di analisi dati, al fine di studiare in modo quantitativo le distribuzioni di eventi ottenute. Grazie a tale strumento è stato possibile riconoscere i segnali di unfolding della conformazione nativa del monomero e notare come essa sia presente anche in costrutti oligomerici, ad indicare come questo ripiegamento sia stabile anche in presenza di più monomeri ravvicinati. Si è osservato l'effetto del pH sulla stabilità di tale struttura, notando come pH acidi destabilizzino il ripiegamento nativo. Inoltre si è studiato il ruolo dell'orientazione dei monomeri nella formazione di strutture dimeriche. Monomeri e oligomeri di PrP sono stati descritti come proteine parzialmente strutturate il cui panorama energetico contiene molti minimi locali, dando origine a parecchie conformazioni transienti.

Image analysis from TEM and AFM micrograph, Table S1, S2, S3, Figure S1, Figure S2

We report on metal enrichment along a natural pH gradient owing to increased CO2 degassing at cold, shal- low seeps of Vulcano Island in the Mediterranean Sea, off Sicily. We assessed composition of unfiltered and filtered seawater (b100 nm) along acidic zones ranging between ambient and pH 5, and showed that most seep derived elements are present as nanoclusters which then aggregate into larger colloids while mixing with ambient seawater along a pH gradient. Size and elemental composition of such naturally occurring nanoparticles assessed by modern characterisation methods were in good agreement with the results from conventional analytical methods. We provide analytical evidence for the presence in the water column of a large fraction of seep derived ele- ments (e.g. approximately 50% of iron, over 80% of Mn, 100% of Cr, S and Zn) in the form of nano sized par- ticles (e.g. b100 nm) even at typical open ocean pHs. We launch in situ sampling protocols and sample preparation procedures for multi-method suitable to obtain accurate measurements on nanoparticles from environmental samples. Based on our results a first insight to the formation of natural nanoparticles at cold CO2 seeps is presented and the persistence of such nano-clusters in the surrounding seawater is stipulated.

Estudo da deposição de filmes finos de BaTi(1-X)Zr(X)O3 por meio de planejamento Box-Behnken

Ferroelectric ceramics with perovskite structure (ABO3) are widely used in solid state memories (FeRAM’s and DRAM's) as well as multilayered capacitors, especially as a thin films. When doped with zirconium ions, BaTiO3-based materials form a solid solution known as barium zirconate titanate (BaTi1-xZrxO3). Also called BZT, this material can undergo significant changes in their electrical properties for a small variation of zirconium content in the crystal lattice. The present work is the study of the effects of deposition parameters of BaTi0,75Zr0,25O3 thin films by spin-coating method on their morphology and physical properties, through an experimental design of the Box-Behnken type. The resin used in the process has been synthesized by the polymeric precursor method (Pechini) and subsequently split into three portions each of which has its viscosity adjusted to 10, 20 and 30 mPa∙s by means of a rotary viscometer. The resins were then deposited on Pt/Ti/SiO2/Si substrates by spin-coating method on 15 different combinations of viscosity, spin speed (3000, 5500 and 8000 rpm) and the number of deposited layers (5, 8 and 11 layers) and then calcined at 800 ° C for 1 h. The phase composition of the films was analyzed by X-ray diffraction (XRD) and indexed with the JCPDS 36-0019. Surface morphology and grain size were observed by atomic force microscopy (AFM) indicating uniform films and average grain size around 40 nm. Images of the cross section of the films were obtained by scanning electron microscopy field emission (SEM-FEG), indicating very uniform thicknesses ranging from 140-700 nm between samples. Capacitance measurements were performed at room temperature using an impedance analyzer. The films presented dielectric constant values of 55-305 at 100kHz and low dielectric loss. The design indicated no significant interaction effects between the deposition parameters on the thickness of the films. The response surface methodology enabled better observes the simultaneous effect of variables.

Determinação do estado fundamental de compostos antiferromagnéticos da série Tb(1-x)Y(x)RhIn(5): aproximação teórico experimental

We present the results of electrical resistivity, magnetic susceptibility, specific heat and x-ray absorption spectroscopy measurements in Tb1−xYxRhIn5 (x = 0.00, 0.15, 0.4.0, 0.50 e 0.70) single crystals. Tb1−xYxRhIn5 is an antiferromagnetic AFM compound with ordering temperature TN ≈ 46 K, the higher TN within the RRhIn5 serie (R : rare earth). We evaluate the physical properties evolution and the supression of the AFM state considering doping and Crystalline Electric Field (CEF) effects on magnetic exchange interaction between Tb3+ magnetic ions. CEF acts like a perturbation potential, breaking the (2J + 1) multiplet s degeneracy. Also, we studied linear-polarization-dependent soft x-ray absorption at Tb M4 and M5 edges to validate X-ray Absorption Spectroscopy as a complementary technique in determining the rare earth CEF ground state. Samples were grown by the indium excess flux and the experimental data (magnetic susceptibility and specific heat) were adjusted with a mean field model that takes account magnetic exchange interaction between first neighbors and CEF effects. XAS experiments were carried on Total Electron Yield mode at Laborat´onio Nacional de Luz S´ıncrotron, Campinas. We measured X-ray absorption at Tb M4,5 edges with incident polarized X-ray beam parallel and perpendicular to c-axis (E || c e E ⊥ c). The mean field model simulates the mean behavior of the whole system and, due to many independent parameters, gives a non unique CEF scheme. XAS is site- and elemental- specific technique and gained the scientific community s attention as complementary technique in determining CEF ground state in rare earth based compounds. In this work we wil discuss the non conclusive results of XAS technique in TbRhIn5 compounds.

An investigation by AFM and TEM of the mechanism of anodic formation of nanoporosity in n-InP in KOH

The early stages of nanoporous layer formation, under anodic conditions in the absence of light, were investigated for n-type InP with a carrier concentration of ∼3× 1018 cm-3 in 5 mol dm-3 KOH and a mechanism for the process is proposed. At potentials less than ∼0.35 V, spectroscopic ellipsometry and transmission electron microscopy (TEM) showed a thin oxide film on the surface. Atomic force microscopy (AFM) of electrode surfaces showed no pitting below ∼0.35 V but clearly showed etch pit formation in the range 0.4-0.53 V. The density of surface pits increased with time in both linear potential sweep and constant potential reaching a constant value at a time corresponding approximately to the current peak in linear sweep voltammograms and current-time curves at constant potential. TEM clearly showed individual nanoporous domains separated from the surface by a dense ∼40 nm InP layer. It is concluded that each domain develops as a result of directionally preferential pore propagation from an individual surface pit which forms a channel through this near-surface layer. As they grow larger, domains meet, and the merging of multiple domains eventually leads to a continuous nanoporous sub-surface region.

Sustained release of TGF-β1 from biodegradable microparticles prepared by a new green process in CO2 medium

International audience

Up-regulation Of Dnam-1 And Nkp30, Associated With Improvement Of Nk Cells Activation After Long-term Culture Of Mononuclear Cells From Patients With Ovarian Neoplasia.

This study aimed at evaluating the functional activation and activating receptors expression on resting, short- and long-term NK and NK-like T cells from blood of ovarian neoplasia patients. Blood from patients with adnexal benign alterations (n = 10) and ovarian cancer (grade I-IV n = 14) were collected after signed consent. Effector cells activation was evaluated by the expression of the CD107a molecule. Short-term culture was conducted overnight with IL-2 and long-term culture for 21 days, by a method designed to expand CD56(+) lymphocytes. Short-term culture significantly increased NK cells activation compared to resting NK cells (p<0.05), however, the long-term procedure supported an even higher increase (p<0.001). Resting NK-like T cells showed poor activation, which was not altered by the culture procedures. The long-term culture effectively increased the expression of the activating receptors on NK and NK-like T cells, either by increasing the number of cells expressing a given receptor and/or by up-regulating their expression intensity. As a conclusion, the long-term culture system employed, resulted in a high number of functional NK cells. The culture system was particularly efficient on the up-regulation of NKp30 and DNAM-1 receptors on NK cells.

Hypertrophic Adenoid Is A Major Infection Site Of Human Bocavirus 1.

Human bocavirus 1 (HBoV1) is associated with respiratory infections worldwide, mainly in children. Similar to other parvoviruses, it is believed that HBoV1 can persist for long periods of time in humans, probably through maintaining concatemers of the virus single-stranded DNA genome in the nuclei of infected cells. Recently, HBoV-1 was detected in high rates in adenoid and palatine tonsils samples from patients with chronic adenotonsillar diseases, but nothing is known about the virus replication levels in those tissues. A 3-year prospective hospital-based study was conducted to detect and quantify HBoV1 DNA and mRNAs in samples of the adenoids (AD), palatine tonsils (PT), nasopharyngeal secretions (NPS), and peripheral blood (PB) from patients undergoing tonsillectomy for tonsillar hypertrophy or recurrent tonsillitis. HBoV1 was detected in 25.3% of the AD samples, while the rates of detection in the PT, NPS, and PB samples were 7.2%, 10.5%, and 1.7%, respectively. The viral loads were higher in AD samples, and 27.3% of the patients with HBoV had mRNA detectable in this tissue. High viral loads and detectable mRNA in the AD were associated with HBoV1 detection in the other sample sites. The adenoids are an important site of HBoV1 replication and persistence in children with tonsillar hypertrophy. The adenoids contain high HBoV1 loads and are frequently positive for HBoV mRNA, and this is associated with the detection of HBoV1 in secretions.