Evaluation of a new intraoral paralleling device for creating guiding planes: A pilot study

Aim: The aim of the study was to assess the accuracy of a new intraoral paralleling device for creating proximal guiding planes for removable partial dental prostheses. Methods and Materials: Thirty gypsum casts were divided into two groups in which the proximal surfaces of selected teeth were prepared using either a surveying device (Group 1) or the new ParalAB paralleling device (Group 2). In each cast guiding planes were prepared on the distal surface of the maxillary left canine (A), on the mesial and distal surfaces of the maxillary left second molar (B and C), and on the distal surface of the maxillary right canine (D). Each prepared surface formed an angle related to the occlusal plane that was measured five times and averaged by one operator using a tridimensional coordinate machine. Results: The mean guiding plane angles (± standard deviation) for the prepared surfaces were A=91.82° (±0.48°, B=90.47° (±0.47°, C=90.21° (±0.76°, and D=90.50° (±0.73°) for the dental surveyor (Group 1) and A=92.18° (±0.87°), B=90.90° (±0.85°), C=90.07° (±0.92°), and D=90.66° (±0.76°) for the ParalAB paralleling device (Group 2). A two-way ANOVA, Tukey's, and Levène's tests (at p<0.05) revealed statistically significant differences among surfaces prepared by both groups and that one surface Conclusions: The ParalAB device was able to prepare parallel surfaces and despite significant difference between groups, the ParalAB presented a small deviation from absolute parallelism and can be considered a valid method to transfer guide plans in the fabrication of removable partial dentures. Clinical Significance: The preparation of suitable guiding planes on abutment teeth during the fabrication of removable partial dentures is dependent on the ability of the operator and requires considerable chair time. When multiple teeth are involved, achieving parallelism between abutment surfaces can be technically challenging, especially in posterior regions of the mouth. The ParalAB prototype intraoral paralleling device can aid the clinician during the preparation of accurate guiding planes with a minimum degree of occlusal divergence. © 2010 Seer Publishing LLC.

Desenvolvimento de um paralelizador intra-oral e verificação de sua precisão como método de transferência de planos de guia: Estudo laboratorial

Pós-graduação em Odontologia Restauradora - ICT

Estudo da diversidade genética e química de Uncaria tomentosa Willd. ex Roem. & Schult. e Uncaria guianensis Gmell. de populações naturais localizadas na Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da diversidade genética e química de Uncaria tomentosa Willd. ex Roem. & Schult. e Uncaria guianensis Gmell. de populações naturais localizadas na Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Acquisition reform : DOD's efforts to streamline its acquisition system and reduce personnel : report to the Honorable William Roth, Jr., U.S. Senate /

"B-221205"--p. 1.

Poly(glycerol adipate-co-ω-pentadecalactone) spray-dried microparticles as sustained release carriers for pulmonary delivery

Purpose: The aim of this work was to optimize biodegradable polyester poly(glycerol adipate-co-ω-pentadecalactone), PGA-co-PDL, microparticles as sustained release (SR) carriers for pulmonary drug delivery. Methods: Microparticles were produced by spray drying directly from double emulsion with and without dispersibility enhancers (L-arginine and L-leucine) (0.5-1.5%w/w) using sodium fluorescein (SF) as a model hydrophilic drug. Results: Spray-dried microparticles without dispersibility enhancers exhibited aggregated powders leading to low fine particle fraction (%FPF) (28.79±3.24), fine particle dose (FPD) (14.42±1.57 μg), with a mass median aerodynamic diameter (MMAD) 2.86±0.24 μm. However, L-leucine was significantly superior in enhancing the aerosolization performance ( L-arginine:%FPF 27.61±4.49-26.57±1.85; FPD 12.40±0.99-19.54±0.16 μg and MMAD 2.18±0.35-2. 98±0.25 μm, L-leucine:%FPF 36.90±3.6-43.38±5. 6; FPD 18.66±2.90-21.58±2.46 μg and MMAD 2.55±0.03-3. 68±0.12 μm). Incorporating L-leucine (1.5%w/w) reduced the burst release (24.04±3.87%) of SF compared to unmodified formulations (41.87±2.46%), with both undergoing a square root of time (Higuchi's pattern) dependent release. Comparing the toxicity profiles of PGA-co-PDL with L-leucine (1.5%w/w) (5 mg/ml) and poly(lactide-co-glycolide), (5 mg/ml) spray-dried microparticles in human bronchial epithelial 16HBE14o-cell lines, resulted in cell viability of 85.57±5.44 and 60.66±6.75%, respectively, after 72 h treatment. Conclusion:The above data suggest that PGA-co-PDL may be a useful polymer for preparing SR microparticle carriers, together with dispersibility enhancers, for pulmonary delivery. © Springer Science+Business Media, LLC 2011.

Radiocarbon dates of peatland initiation across the northern high latitudes

A compilation of basal dates of peatland initiation across the northern high latitudes, associated metadata including location, age, raw and calibrated radiocarbon ages, and associated references. Includes previously published datasets from sources below as well as 365 new data points.

Age determination of sediments off western Svalbard

Late Quaternary sediment yields from the Isfjorden drainage area (7327 km**2), a high arctic region on Svalbard characterized by an alpine landscape, have been reconstructed by using seismic stratigraphy supported by sediment core analysis. The sediments that accumulated in the fjord during and since deglaciation can be divided into three stratigraphic units. The volumes of these units were determined and converted into sediment yield rates averaged over the drainage basin. During deglaciation, 13 to 10 ka, the sediment yield was ~860 tons(t)/km**2/yr. In the early Holocene it decreased to 190 t/km**2/yr, and then increased to 390t/km**2/yr during the late Holocene Little Ice Age. When normalized to the approximate glacierized area, these rates correspond to a sediment yield of ~800 t/km**2/yr . Sediment yield from non-glacierized parts of the drainage is estimated to be 35 t/km**2/yr. At times when ice advanced to the shelf edge, sediment was scoured from the fjord and deposited on the outer shelf and in a well-defined deep sea fan. Between 200 ka and 13 ka, 328 km**3 of sediment accumulated here, corresponding to a mean sediment yield rate of 335 t/km**2/yr. This is broadly consistent with calculations based on the above rates of sediment yield in glacierized and non-glacierized areas, and on estimates, based on glacial geology, of the temporal variation in degree of glacierization over the past 200 kyr. These figures indicate that much of the glacigenic sediment on the shelf and slope was eroded from the uplands of Svalbard by small glaciers during interstadials and interglacials. The sediments were temporarily stored in the fjord prior to redeposition on the shelf and slope during ice sheet advance. Taken into consideration, such redisposition of pre-eroded material will reduce estimates of primary ice sheet erosion rate.

Parasitismo em cochonilha pardinha Selenaspidus sp. (Homoptera, Diaspididae) por Aphytis sp. (Hymenoptera, Aphelinidae).

Os pomares de citrus das principais regiões do Estado de São Paulo vem sendo prejudicados pela cochonilha pardinha Selenaspidus sp. que suga a seiva das folhas e provoca a queda dos frutos. O uso indiscriminado de defensivos químicos vem contribuindo para a destruição dos inimigos naturais e consequente proliferação da praga. Com o objetivo de estudar a frequência ou a porcentagem de parasitismo dessa cochonilha, foram feitas coletas de folhas de laranjeira para valência de um pomar de 500 alqueires localizado em Brotas - SP, em 4 épocas diferentes dos anos de 1989/90. As folhas infestadas foram examinadas ao microscópio estetoscópio para contagem das carapaças com perfurações de saída dos parasitóides. Foram colocadas algumas folhas em placas de Petri para observacao da emergência dos parasitóides. As maiores porcentagens de parasitismo foram observadas nos meses de abril/90 (21,9%) e outubro/89 (21,4%) e a menor, (2,11%) em julho/89. Os parasitóides emergidos foram identificados preliminarmente por ROBBS como sendo Aphytis sp.

Rações úmidas e água de consumo e racão com edulcorante para leitões desmamados aos 21 dias e efeitos sobre o desempenho até os 90 kg de peso vivo

Um experimento foi realizado visando avaliar o fornecimento de rações úmidas e de água de consumo e rações com edulcorante para leitões desmamados e seus efeitos sobre o desempenho até o 90kg de peso vivo. Foram utilizados 32 leitões Large White x Landrace, desmamados aos 21 dias, submetidos, durante a fase inicial I (21 a 42 dias de idade), a 8 tratamentos correspondentes à combinação dos fatores: forma de apresentação da ração (seca e úmida), tipo de ração (sem e com edulcorante) e água de consumo (sem e com edulcorante). Foram avaliados a ocorrência de diarréia até o 10º dia pós-desmame, o ganho diário de peso (GDP), o consumo diário de ração (CDR) e a conversão alimentar (CA) até os 90kg de peso vivo. O consumo diário de água (CDA) foi avaliado na fase inicial I. O delineamento foi em blocos ao acaso, com arranjo fatorial 2³, com quatro repetições, sendo as médias comparadas pelo teste de Tukey e a incidência de diarréia pelo teste de qui-quadrado. Foram observadas diferenças (P<0,05), na fase inicial I, para o CDA para os grupos tratados com ração seca e para o CDR para os animais que receberam água com edulcorante. A ocorrência de diarréia foi maior (P<0,05) para os animais tratados com ração seca. O desempenho até os 90 kg de peso vivo foi semelhante entre os fatores (P>0,05). O experimento demonstrou que os tratamentos dirigidos na fase pós-desmame são insuficientes para melhorar os resultados até os 90kg de peso vivo.