Hydration and distortion of peptide helices in crystals. α-Helical structure of a dodecapeptide, Boc-(Ala-Leu-Aib)4-OMe

The dodecapeptide Boc-(Ala-Leu-Aib)(4)-OMe crystallized with two independent helical molecules in a triclinic cell. The two molecules are very similar in conformation, with a 3(10)-helix turn at the N-terminus followed by an alpha-helix, except for an elongated N(7)...O(3) distance in both molecules. All the helices in the crystal pack in a parallel motif. Eleven water sites have been found in the head-to-tail region between the apolar helices that participate in peptide-water hydrogen bonds and a network of water-water hydrogen bonds. The crystal parameters are as follows: 2(C58H104N12O15)+ca. 10H(2)O, space group P1 with a = 12.946(2), b = 17.321(3), c = 20.465(4) Angstrom, alpha = 103.12(2), beta = 105.63(2), gamma = 107.50(2)degrees, Z = 2, R = 10.9% for 5152 data observed > 3 sigma(F), resolution 1.0 Angstrom. In contrast to the shorter sequences [Karle et al. (1988)Proc. Natl. Acad. Sci. USA 85, 299-303] and Boc-(Ala-Leu-Aib)(2)-OMe [Karle et al. (1989) Biopolymers 28, 773-781], no insertion of a water molecule into the helix is observed. However, the elongated N---O distance between Ala(7) NH and Aib(3) CO in both molecules (molecule A, 3.40 Angstrom; molecule B, 3.42 Angstrom) is indicative of an incipient break in the helices. (C) Munksgaard 1994.

Chiral synthons from carvone, Part 40. A simple, enantiospecific approach to both enantiomers of 1 alpha,25-dihydroxyvitamin D-3 A-ring precursors from R-carvone

A simple and direct approach to both enantiomeric series of A-ring derivatives of 1 alpha,25-dihydroxyvitamin D-3 and the corresponding 1 alpha,3 alpha-derivatives, starting from the abundantly available R-carvone, is described. (C) 2000 Elsevier Science Ltd. All rights reserved.

A study of cubic bismuth oxides of the type bi(26-X)m(X)O(40-delta) (m=ti, mn, fe, co, ni or pb) related to gamma-bi2O3

A structural investigation of cubic oxides (space group I23) of the formula Bi(26-x)M(x)O(40-delta) (M = Ti, Mn, Fe, Co, Ni and Pb) related to the Y-Bi2O3 phase has been carried out by the Rietveld profile analysis of high-resolution X-ray powder diffraction data in order to establish the cation distributions. Compositional dependence of the cation distribution has been examined in the case of Bi26-xCoxO40-delta (1 < x < 16). The study reveals that in Bi(26-X)M(X)O(40-delta) with M = Ti, Mn, Fe, Co or Pb, the M cations tend to occupy tetrahedral (2a) sites when x < 2 while the octahedral (24f) sites are shared by the excess Co or Ni cations with Bi atoms when x > 2. Also experimental magnetic moments of Mn, Co and Ni derivatives have been used to establish the valence state and distribution of these cations.

Interaction of A beta peptide (1-40) with amino acid aluminium complexes: relevance to Alzheimer's disease

A beta (39-43 aminoacid residues) is the principal peptide component of amyloid deposits in Alzheimer's disease (AD). A beta peptide is derived from the amyloid precursor protein (APP) in which mutations give rise to many forms of familial AD. Aluminium is reported to play a key role in inducing conformational change in the synthetic beta-amyloid peptide (1-40)from alpha-helix to beta-pleated sheet, leading to aggregation and fibrillar formation. We have studied the interaction of amino acid-Al complexes such as D-Asp-Al and L-Glu-Al with A beta(1-40) in TFE/buffer (70% TFE and 30% H2O v/v pH 6.7) mixture using CD spectroscopy. The interaction of either of these amino acid complexes with A beta(1-40) results in loss of alpha-helical content and the peptide is more unstructured compared to free Al3+ in the solution. Our data strongly support the idea, that the Al3+ in the form of aminoacid-Al complexes is more effective in inducing random coil conformation in the A beta peptide than the free Al3+ present in the solution.

Magnetocaloric effect in La1-xSrxCoO3 (0.05 <= x <= 0.40)

We report studies of magnetocaloric effect in lanthanum cobaltate doped with different Sr-concentrations, La1-xSrxCoO3 (0.05 less than or equal to x less than or equal to 0.4). The study has revealed that La0.6Sr0.4CoO3, which exhibits a moderately large value of maximum entropy change of about 1.45 J/kg/K in 1.5 T DC-fieid around its Curie temperature (of 235 K), can be used as an active magnetic refrigerant (AMR) material at similar to 2.35 K. (C) 1999 Elsevier Science B.V. Al rights reserved.

Electrical switching studies on AS(40)Te(60-x)Se(x) and As35Te65-xSex glasses

The I-V characteristics of bulk As40Te60-xSex and As35Te65-xSex glasses have been studied with a current sweep of 0-18 mA-0, over a wide range of compositions (4 less than or equal to x less than or equal to 22). All the glasses studied showed a threshold electrical switching behaviour. The number of switching cycles withstood by the samples has been found to depend on the ON-state current. It is seen that the switching voltages increase with increase in selenium content. Further, the switching voltages are found to be almost independent of the thickness of the sample (d), in the range 0.18-0.3 mm. Also, the switching voltages and the number of switching cycles withstood by the samples are found to decrease with temperature.

An Exported Heat Shock Protein 40 Associates with Pathogenesis-Related Knobs in Plasmodium falciparum Infected Erythrocytes

Cell surface structures termed knobs are one of the most important pathogenesis related protein complexes deployed by the malaria parasite Plasmodium falciparum at the surface of the infected erythrocyte. Despite their relevance to the disease, their structure, mechanisms of traffic and their process of assembly remain poorly understood. In this study, we have explored the possible role of a parasite-encoded Hsp40 class of chaperone, namely PFB0090c/PF3D7_0201800 (KAHsp40) in protein trafficking in the infected erythrocyte. We found the gene coding for PF3D7_0201800 to be located in a chromosomal cluster together with knob components KAHRP and PfEMP3. Like the knob components, KAHsp40 too showed the presence of PEXEL motif required for transport to the erythrocyte compartment. Indeed, sub-cellular fractionation and immunofluorescence analysis (IFA) showed KAHsp40 to be exported in the erythrocyte cytoplasm in a stage dependent manner localizing as punctuate spots in the erythrocyte periphery, distinctly from Maurer's cleft, in structures which could be the reminiscent of knobs. Double IFA analysis revealed co-localization of PF3D7_0201800 with the markers of knobs (KAHRP, PfEMP1 and PfEMP3) and components of the PEXEL translocon (Hsp101, PTEX150). KAHsp40 was also found to be in a complex with KAHRP, PfEMP3 and Hsp101 as confirmed by co-immunoprecipitation assay. Our results suggest potential involvement of a parasite encoded Hsp40 in chaperoning knob assembly in the erythrocyte compartment.

Texture transition in cold-rolled nickel-40 wt.% cobalt alloy

The micromechanical aspects of rolling texture development in Ni-40 wt.% Co alloy during very large reductions (up to epsilon(t) = 3.9) have been studied. The alloy showed a typical Cu-type texture up to a true strain of epsilon(t) = 3; however, the texture undergoes an abrupt transition to Bs-type on further rolling to epsilon(t) approximate to 4. (The Bs-type texture, here, comprises almost equal fractions of Goss and Bs components.) Microstructural observations, at early stages, show that deformation is accommodated entirely by slip, and very little presence of deformation twinning is observed to explain the texture transition. However, at much higher reduction levels, micrographs show a high fraction of Cu-type shear bands. These bands are predominantly found in Cu-oriented grains and the crystallites inside the shear bands are preferentially oriented towards Goss, which could explain the final texture evolution. (C) 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Rendimiento agroindustrial de la variedad L 68-40 (Sacharum SP) en respuesta a las aplicaciones de N, P y K, cultivada en un suelo rojo en caña planta

El presente estudio se realizó en el ingenio AGROINSA, de junio de 1994 a febrero de 1995. Se evaluó el rendimiento agro­ industrial en caña de azúcar . Se plantó la variedad L 68-40. El diseño experimental utilizado fue el de Bloques Completamente Azarizado (BCA), las variables analizadas fueron brotación, ahijamiento, diámetro, población, altura, peso promedio de tallos, rendimiento agrícola, rendimiento industrial y rendimiento agro-industrial. Los datos que se obtuvieron se sometieron al análisis de varianza y de regresión, además se realizó la separación de medias según Duncan a un 5 % de margen de error. En todas las variables evaluadas se observó diferencia significativa a excepción del diámetro y el rendimiento industrial, siendo el nitrógeno el elemento que presentó mayor influencia positiva, no encontrándose ningún efecto para el fósforo y el potasio. Las mejores dosis de nitrógeno para producir el 90 por ciento del rendimiento máximo agrícola y agro-industrial, obtenida a través del modelo matemático cuadrático fueron 58 y 55 kg/ha de N, respectivamente.

Productividad de la caña de azúcar (Saccharum officinarum) en respuesta a dos formas y épocas de aplicación del nitrógeno en la variedad L-68-40

Se estudió el comportamiento agro-industrial de la variedad L-68-40, de Marzo 1995- Marzo 1996. Se evaluaron las formas y épocas de aplicación del nitrógeno sobre el cultivo de la caña de azúcar (Saccharum sp) . El diseño experimental utilizado fue de Bloques Completos al Azar, las variables analizadas fueron: Germinación, diámetro, altura, población, peso por tallo, rendimiento agrícola, rendimiento industrial y rendimiento agro industrial. Los datos obtenidos se sometieron al análisis de varianza y separación de medias según, Dtmcan al 5 por ciento. Según los resultados obtenidos de las variables evaluadas no se observaron diferencias estadísticas significativas. El mayor rendimiento agrícola fue de 153.16 toneladas de caña por hectárea, este se obtuvo aplicando el fertilizante 75 días después de la siembra. El mayor rendimiento industrial de 89.02 kg de azúcar por toneladas correspondiente a la aplicación del fertilizante de forma fraccionada al momento de la siembra + 75 días después de la siembra. El mayor rendimiento agro-industrial fue obtenido en el tratamiento 75 días después de la siembra con una aplicación de forma total con 14.59 toneladas de azúcar por hectárea.

Rendimiento agroindustrial de la variedad L 68-40 (Saccharum sp.), en respuesta a las aplicaciones de N, P y K, cultivada en un suelo negro en caña planta

El presente trabajo se desarrolló en el Ingenio AGROINSA, de enero de 1995 al mes de marzo de 1996. Se evaluó el rendimiento agro-industrial de la variedad L 68-40 de caña de azúcar (Saccharum sp.), en respuesta a aplicaciones de nitrógeno, fósforo y potasio, cultivada en un suelo negro vertisol, serie Malacatoya (MY). El ensayo se monto de acuerdo a un diseño factorial incompleto en un Bloque Completamente al Azar (BCA), las variables analizadas fueron: Brotación, ahijamiento, diámetro, población, altura, peso promedio de tallo, rendimientos agrícola, industrial y agro-industrial. Los resultados se sometieron a un análisis de varianza y de regresión, además de realizarse una separación de media según la prueba de Cunean al 5 % de margen de error. En todas las variables evaluadas se observó diferencia significativa a excepción del diámetro, peso promedio de tallo y rendimiento industrial, siendo el nitrógeno el elemento que presentó mayor influencia significativa provocando una respuesta directamente proporcional a sus aplicaciones, sin embargo el fósforo y el potasio no influenciaron en la respuesta de las mismas. Las mayores dosis de nitrógeno para producir el 90 % rendimiento agrícola y agro-industrial máximo, obtenida a través del modelo lineal discontinuo fueron de 72.39 y 74.63 kg/ha de nitrógeno respectivamente